{"id":103222,"date":"2023-05-19T09:23:20","date_gmt":"2023-05-19T09:23:20","guid":{"rendered":"https:\/\/v2charge.com\/?page_id=103222"},"modified":"2025-12-22T13:09:23","modified_gmt":"2025-12-22T11:09:23","slug":"updates","status":"publish","type":"page","link":"https:\/\/v2charge.com\/fr\/updates\/","title":{"rendered":"Updates"},"content":{"rendered":"\n
\n


Updates<\/h1><\/div>\n\n\n\n

Nous travaillons continuellement \u00e0 l\u2019am\u00e9lioration des fonctionnalit\u00e9s de nos produits. Consultez toutes les mises \u00e0 jour des e-Chargers et de l\u2019application multiplateforme V2C Cloud.<\/p>\n\n\n\n

\n
\n
\"actualizaciones<\/a><\/figure>\n<\/div>\n\n
\n
\"actualizaciones<\/a><\/figure>\n<\/div>\n\n
\n
\"\"<\/a><\/figure>\n<\/div>\n\n
\n
\"actualizaciones<\/a><\/figure>\n<\/div>\n\n
\n
\"actualizaciones<\/a><\/figure>\n<\/div>\n\n
\n
\"actualizaciones<\/a><\/figure>\n<\/div><\/div>\n\n\n\n
\n

Trydan<\/a><\/p><\/div>\n\n\n\n

Pole Pro<\/a><\/p><\/div>\n\n\n\n

Denka<\/a><\/p><\/div>\n\n\n\n

Screen<\/a><\/p><\/div>\n\n\n\n

V2C Cloud
mobile<\/a><\/p><\/div>\n\n\n\n

V2C Cloud portal web<\/a><\/p><\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n

\n

Trydan<\/h2><\/div>\n\n\n
2.4.2<\/div>
f\u00e9vrier 2, 2026<\/small><\/div><\/div>

Corrections mineures<\/p>\n<\/div>

Improved<\/div>
Mise \u00e0 jour OTA plus robuste<\/div><\/div>
Added<\/div>
Cartes RFID MIFARE Ultralight<\/div><\/div>
Fixed<\/div>
Bug de gestion de l\u2019autolock avec le mode payments<\/div><\/div>
Fixed<\/div>
Bug en mode payments avec RFID<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.4.1<\/div>
janvier 8, 2026<\/small><\/div><\/div>

Bugs sur les onduleurs et am\u00e9liorations mineures<\/p>\n<\/div>

Improved<\/div>
Lecture des probl\u00e8mes d\u2019installation<\/div><\/div>
Improved<\/div>
Am\u00e9lioration du mode BYD<\/div><\/div>
Fixed<\/div>
Bug avec l\u2019onduleur Wibeee<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.4.0<\/div>
d\u00e9cembre 15, 2025<\/small><\/div><\/div>

Am\u00e9liorations des onduleurs et des API Modbus\/HTTP, am\u00e9liorations de la gestion du contr\u00f4le dynamique et de la charge, OCPP plus robuste et corrections mineures<\/p>\n<\/div>

Added<\/div>
R\u00e9cup\u00e9ration de la version du firmware via Modbus<\/div><\/div>
Updated<\/div>
Am\u00e9liorations du contr\u00f4le dynamique<\/div><\/div>
Updated<\/div>
Am\u00e9lioration des mesures des onduleurs Sungrow<\/div><\/div>
Fixed<\/div>
Erreur "En attente de puissance"<\/div><\/div>
Updated<\/div>
Am\u00e9liorations de la mise \u00e0 jour OTA<\/div><\/div>
Updated<\/div>
Am\u00e9liorations du menu de la boutonni\u00e8re<\/div><\/div>
Updated<\/div>
Nouveaux mod\u00e8les Deye<\/div><\/div>
Added<\/div>
GoodWe via Modbus TCP<\/div><\/div>
Updated<\/div>
OCPP : am\u00e9lioration de MeterValues<\/div><\/div>
Added<\/div>
OCPP : FirmwareManagement<\/div><\/div>
Updated<\/div>
OCPP : envoi du StatusNotification \u00ab Faulted \u00bb avec erreurs et avertissements<\/div><\/div>
Updated<\/div>
OCPP : publication de la version actuelle<\/div><\/div>
Updated<\/div>
OCPP : d\u00e9lai d\u2019attente BootNotification<\/div><\/div>
Updated<\/div>
Nouveaux serveurs NTP<\/div><\/div>
Added<\/div>
Verrouillage automatique<\/div><\/div>
Added<\/div>
Nouveaux mod\u00e8les MID<\/div><\/div>
Added<\/div>
Nouveaux modes de r\u00e9veil<\/div><\/div>
Updated<\/div>
Am\u00e9lioration du scan Wi-Fi<\/div><\/div>
Added<\/div>
Autoriser le changement du type de charge dans HA (monophas\u00e9, triphas\u00e9 ou mixte)<\/div><\/div>
Updated<\/div>
Am\u00e9lioration du compteur P1<\/div><\/div>
Updated<\/div>
Am\u00e9lioration des logs \u00e0 distance<\/div><\/div>
Updated<\/div>
Limitation des appels IoT par chargeur<\/div><\/div>
Added<\/div>
Compteur Linky pour compteurs fran\u00e7ais<\/div><\/div>
Fixed<\/div>
Bug des cartes RFID avec des noms longs<\/div><\/div>
Fixed<\/div>
Bug lors de la demande de la liste des SSID Wi-Fi via Bluetooth<\/div><\/div>
Fixed<\/div>
Am\u00e9lioration des statistiques via Bluetooth<\/div><\/div>
Fixed<\/div>
Am\u00e9liorations de l\u2019\u00e9quilibrage local jusqu\u2019\u00e0 10 appareils<\/div><\/div>
Updated<\/div>
Am\u00e9lioration de la m\u00e9moire RAM<\/div><\/div>
Updated<\/div>
Stabilit\u00e9 Ethernet<\/div><\/div>
Updated<\/div>
Traductions corrig\u00e9es<\/div><\/div>
Fixed<\/div>
Bug lors de l\u2019envoi du code RFID dans les statistiques<\/div><\/div>
Added<\/div>
R\u00e9sistance de terminaison Modbus<\/div><\/div>
Added<\/div>
Lecture de propri\u00e9t\u00e9s individuelles via l\u2019API HTTP<\/div><\/div>
Added<\/div>
Allumage\/extinction du logo et de l\u2019\u00e9cran LCD via l\u2019API HTTP<\/div><\/div>
Fixed<\/div>
Bug avec le mode PV Exclusif et les batteries<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.3.20<\/div>
juin 9, 2025<\/small><\/div><\/div>

Nouveau contr\u00f4le statique de la puissance pour Trydan. Am\u00e9liorations cl\u00e9s du contr\u00f4le de la puissance et compatibilit\u00e9 avec le march\u00e9 europ\u00e9en.<\/p>\n<\/div>

Added<\/div>
Contr\u00f4le statique de la puissance ajout\u00e9 (uniquement avec la consommation Trydan).<\/div><\/div>
Updated<\/div>
L\u2019algorithme de contr\u00f4le de la puissance a \u00e9t\u00e9 modifi\u00e9 \u00e9tape par \u00e9tape pour int\u00e9grer une modulation PID.<\/div><\/div>
Added<\/div>
La charge mixte a \u00e9t\u00e9 adapt\u00e9e aux tarifs europ\u00e9ens.<\/div><\/div>
Added<\/div>
La programmation du contr\u00f4le de la puissance avec des limites par phase est d\u00e9sormais possible.<\/div><\/div>
Added<\/div>
Le contr\u00f4le de la puissance a \u00e9t\u00e9 adapt\u00e9 aux pays europ\u00e9ens avec des limites d\u2019intensit\u00e9 par phase.<\/div><\/div>
Updated<\/div>
Le contr\u00f4le statique de la puissance entre prises ou entre e-Chargers a \u00e9t\u00e9 am\u00e9lior\u00e9.<\/div><\/div>
Fixed<\/div>
L\u2019\u00e9chec de l\u2019enregistrement \u00e0 distance en cas de d\u00e9connexion a \u00e9t\u00e9 corrig\u00e9.<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.2.8<\/div>
mars 13, 2025<\/small><\/div><\/div>

Bug r\u00e9solu avec les compteurs DTSU666-G<\/p>\n<\/div>

Fixed<\/div>
Bug avec les compteurs DTSU666-G<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.2.7<\/div>
d\u00e9cembre 4, 2024<\/small><\/div><\/div>

Am\u00e9liorations du Mode R\u00e9veil et du port MQTT<\/p>\n<\/div>

Fixed<\/div>
Correction d\u2019un bug lors du changement de port dans MQTT<\/div><\/div>
Improved<\/div>
Am\u00e9lioration du Mode R\u00e9veil<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.2.5<\/div>
novembre 18, 2024<\/small><\/div><\/div>

Programmation horaire avec EcoCharging. Am\u00e9liorations de l\u2019impl\u00e9mentation du protocole OCPP, de la lecture des signaux \u00e9lectriques et de l\u2019optimisation du syst\u00e8me (r\u00e9duction de l\u2019utilisation de la RAM)<\/p>\n<\/div>

Added<\/div>
EcoCharging pour programmer automatiquement la charge aux heures o\u00f9 l\u2019\u00e9lectricit\u00e9 est la moins ch\u00e8re<\/div><\/div>
Added<\/div>
Allumage et extinction des LED via Modbus TCP\/RTU. Option pour r\u00e9gler et consulter l\u2019intensit\u00e9 des LED et de l\u2019\u00e9cran LCD<\/div><\/div>
Improved<\/div>
Lecture de la puissance des batteries dans les onduleurs Goodwe EH et ET<\/div><\/div>
Added<\/div>
Compatibilit\u00e9 avec le nouveau mod\u00e8le de compteur Chint DTSU666-G, permettant une int\u00e9gration plus large dans diff\u00e9rentes installations<\/div><\/div>
Improved<\/div>
Optimisation du syst\u00e8me : r\u00e9duction de l\u2019utilisation de la RAM, am\u00e9liorant la stabilit\u00e9 et les performances g\u00e9n\u00e9rales du syst\u00e8me<\/div><\/div>
Added<\/div>
Mise \u00e0 jour du firmware du compteur V2C ControlBox (2.0) via le point d\u2019acc\u00e8s (AP) et l\u2019application mobile<\/div><\/div>
Added<\/div>
Am\u00e9lioration de la lecture des signaux \u00e9lectriques : D\u00e9tection de l\u2019\u00e9tat F, am\u00e9liorant la capacit\u00e9 du syst\u00e8me \u00e0 reconna\u00eetre et r\u00e9agir \u00e0 diff\u00e9rentes conditions op\u00e9rationnelles<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de la lecture des signaux \u00e9lectriques : V\u00e9rification am\u00e9lior\u00e9e pour l\u2019\u00e9tat E, en ignorant les valeurs nulles du DMA pour \u00e9viter des lectures incorrectes<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de la lecture des signaux \u00e9lectriques : D\u00e9sormais, le signal CP (Control Pilot) est lu \u00e0 l\u2019aide d\u2019une t\u00e2che parall\u00e8le, ce qui am\u00e9liore la pr\u00e9cision et la r\u00e9ponse du syst\u00e8me lors de l\u2019interaction avec le v\u00e9hicule \u00e9lectrique<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de la lecture des signaux \u00e9lectriques : Stabilit\u00e9 accrue pendant le processus d\u2019\u00e9talonnage via l\u2019application<\/div><\/div>
Added<\/div>
Am\u00e9lioration de la lecture des signaux \u00e9lectriques : Lecture du signal PWM d\u2019entr\u00e9e impl\u00e9ment\u00e9e \u00e0 l\u2019aide de DMA (Acc\u00e8s Direct \u00e0 la M\u00e9moire), am\u00e9liorant l\u2019efficacit\u00e9 et r\u00e9duisant la charge de traitement<\/div><\/div>
Fixed<\/div>
OCPP : Correction d\u2019une fausse alerte de d\u00e9tection de carte lors du d\u00e9marrage du syst\u00e8me, \u00e9vitant les confusions et am\u00e9liorant l\u2019exp\u00e9rience utilisateur<\/div><\/div>
Improved<\/div>
OCPP : R\u00e9solution des noms d\u2019h\u00f4te. Optimisation des biblioth\u00e8ques pour am\u00e9liorer la r\u00e9solution DNS et la fiabilit\u00e9 des connexions s\u00e9curis\u00e9es via WebSocket S\u00e9curis\u00e9 (WSS), augmentant la stabilit\u00e9 dans la communication avec les serveurs distants<\/div><\/div>
Improved<\/div>
OCPP : Garantie que toutes les informations importantes parviennent au serveur une fois la connexion r\u00e9tablie gr\u00e2ce \u00e0 une file d\u2019attente persistante de messages<\/div><\/div>
Improved<\/div>
OCPP : Notifications d\u2019\u00e9tat. Am\u00e9lioration de la communication avec le serveur central pour l\u2019envoi des notifications d\u2019\u00e9tat<\/div><\/div>
Added<\/div>
OCPP : Raisons d\u00e9taill\u00e9es ajout\u00e9es aux fonctions OCPP, fournissant des informations plus compl\u00e8tes sur les actions r\u00e9alis\u00e9es et facilitant le diagnostic et l\u2019analyse des \u00e9v\u00e9nements<\/div><\/div>
Added<\/div>
OCPP : Capacit\u00e9 de fonctionner en modes hors ligne, permettant au chargeur de fonctionner correctement m\u00eame sans connexion au serveur. Les messages en attente sont stock\u00e9s et envoy\u00e9s une fois la connexion r\u00e9tablie, garantissant une communication fiable et coh\u00e9rente<\/div><\/div>
Added<\/div>
OCPP : Nouvelle machine \u00e0 \u00e9tats OCPP. Le syst\u00e8me se connecte d\u00e9sormais au Serveur Central (CS) OCPP et re\u00e7oit la plupart des commandes, am\u00e9liorant l\u2019interop\u00e9rabilit\u00e9 et le contr\u00f4le \u00e0 distance<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.1.17<\/div>
juillet 15, 2024<\/small><\/div><\/div>

Am\u00e9lioration de la gestion de la m\u00e9moire et des connexions Modbus TCP, ajout des SAJ hybrides et Shelly Pro<\/p>\n<\/div>

Added<\/div>
Lecture et \u00e9criture manuelle de la tension de l\u2019installation pour les int\u00e9grations Modbus TCP et HTTP<\/div><\/div>
Improved<\/div>
D\u00e9tection des fuites<\/div><\/div>
Fixed<\/div>
Informations des cartes RFID conformes aux standards des plateformes OCPP pour la compatibilit\u00e9 avec des plateformes comme E-flux, Monta...<\/div><\/div>
Improved<\/div>
Gestion de la m\u00e9moire pour \u00e9viter les red\u00e9marrages impr\u00e9vus avec OCPP et la suppression des profils de puissance programm\u00e9e<\/div><\/div>
Added<\/div>
Compteurs Shelly Pro<\/div><\/div>
Improved<\/div>
Connexions Modbus TCP de Trydan et Trydan Pro avec des onduleurs Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA et SAJ Hybrid avec l\u2019erreur 252<\/div><\/div>
Fixed<\/div>
Collision entre les \u00e9l\u00e9ments SPI (RFID, Ethernet et extension GPIO) de Trydan Pro<\/div><\/div>
Improved<\/div>
Affichage du processus d\u2019authentification des cartes RFID dans OCPP<\/div><\/div>
Added<\/div>
Informations \u00e0 la r\u00e9ponse \/RealtimeData de HTTP \u00e0 la demande du d\u00e9veloppeur de l\u2019int\u00e9gration officielle de HA<\/div><\/div>
Added<\/div>
M\u00e9thodes directes pour activer le point d\u2019acc\u00e8s (WiFi AP) et effectuer un ping \u00e0 une IP sp\u00e9cifique<\/div><\/div>
Added<\/div>
Topic trydan_v2c_voltage pour \u00e9crire la tension de l\u2019installation via MQTT<\/div><\/div>
Improved<\/div>
La m\u00e9moire utilis\u00e9e pour JSON et OCPP est transf\u00e9r\u00e9e \u00e0 la RAM SPI<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.1.11<\/div>
juin 5, 2024<\/small><\/div><\/div>

Modifications visuelles et corrections mineures<\/p>\n<\/div>

Added<\/div>
Adaptation de l\u2019OCPP aux nouveaux syst\u00e8mes centraux<\/div><\/div>
Fixed<\/div>
Clignotement des LED en cas de d\u00e9connexion<\/div><\/div>
Fixed<\/div>
Bug sur Greenheiss hybride<\/div><\/div>
Added<\/div>
Nouveaux mod\u00e8les Deye<\/div><\/div>
Improved<\/div>
Am\u00e9liorations dans la d\u00e9tection du sens de la V2C 2.0 control box<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.1.10<\/div>
juin 3, 2024<\/small><\/div><\/div>

Correction de bugs mineurs, ajout des Shelly Pro (EM et 3EM) et Deye triphas\u00e9<\/p>\n<\/div>

Improved<\/div>
Affichage du texte sur les compteurs bidirectionnels<\/div><\/div>
Fixed<\/div>
Bug avec la langue fran\u00e7aise<\/div><\/div>
Improved<\/div>
Lectures avec Fronius et DTSU666<\/div><\/div>
Fixed<\/div>
D\u00e9marrage du serveur HTTP via Ethernet<\/div><\/div>
Improved<\/div>
Temps de r\u00e9action du d\u00e9tecteur de fuites<\/div><\/div>
Fixed<\/div>
Bug dans les paiements<\/div><\/div>
Added<\/div>
Deye \/ Turbo Energy triphas\u00e9<\/div><\/div>
Fixed<\/div>
Propri\u00e9t\u00e9s en lecture seule dans OCPP<\/div><\/div>
Fixed<\/div>
Enregistrement des plages de puissance via Bluetooth sur certains dispositifs<\/div><\/div>
Added<\/div>
Shelly Pro EM et Shelly Pro 3EM (Beta)<\/div><\/div>
Fixed<\/div>
Mesures Shelly Portugal<\/div><\/div>
Improved<\/div>
Affichage de "En Attente de Charge" en mode Stop<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.1.7<\/div>
mai 6, 2024<\/small><\/div><\/div>

Correction de bugs mineurs de la version pr\u00e9c\u00e9dente<\/p>\n<\/div>

Improved<\/div>
Affichage de l\u2019arr\u00eat d\u00fb au contr\u00f4le dynamique<\/div><\/div>
Improved<\/div>
Red\u00e9marrages lors de tentatives de reconnexionRed\u00e9marrages lors de tentatives de reconnexion<\/div><\/div>
Fixed<\/div>
Mesure NaN sur certains compteurs<\/div><\/div>
Improved<\/div>
Protocole de QA<\/div><\/div>
Improved<\/div>
Lecture de la tension et de la temp\u00e9rature du PCB de puissance<\/div><\/div>
Fixed<\/div>
Erreur dans les lectures Home Wizard<\/div><\/div>
Added<\/div>
Logs \u00e0 distance en direct<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
2.1.4<\/div>
avril 22, 2024<\/small><\/div><\/div>

Am\u00e9liorations des performances et de la compatibilit\u00e9. Trydan est d\u00e9sormais plus efficace et compatible avec la norme OCPP, avec des processus de QA plus solides. Il optimise \u00e9galement l’utilisation de la m\u00e9moire et renforce les statistiques pour fournir des donn\u00e9es plus pr\u00e9cises.<\/p>\n<\/div>

Improved<\/div>
Am\u00e9liorations futures des performances et de la compatibilit\u00e9 entre Trydan et Trydan Pro<\/div><\/div>
Improved<\/div>
Am\u00e9liorations du protocole OCPP<\/div><\/div>
Improved<\/div>
Am\u00e9liorations du processus de QA<\/div><\/div>
Improved<\/div>
Utilisation optimis\u00e9e de la m\u00e9moire<\/div><\/div>
Improved<\/div>
Statistiques plus robustes<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.7.17<\/div>
d\u00e9cembre 12, 2023<\/small><\/div><\/div>

Mise \u00e0 jour Azure, nouveau BLE, modification du r\u00e9veil des v\u00e9hicules<\/p>\n<\/div>

Improved<\/div>
Mise \u00e0 jour des biblioth\u00e8ques Azure<\/div><\/div>
Improved<\/div>
Mise \u00e0 jour des biblioth\u00e8ques ESP-IDF et Arduino-ESP32<\/div><\/div>
Added<\/div>
R\u00e9seaux s\u00e9curis\u00e9s WPA3<\/div><\/div>
Fixed<\/div>
Modification de la batterie Deye\/Turbo Energy<\/div><\/div>
Improved<\/div>
Communication avec l'onduleur via une connexion WiFi sans Internet<\/div><\/div>
Fixed<\/div>
Personnalisation des sujets MQTT et de l'utilisateur\/mot de passe<\/div><\/div>
Added<\/div>
Nouveau BLE (NimBLE)<\/div><\/div>
Fixed<\/div>
Rapport de statistiques apr\u00e8s d\u00e9connexion<\/div><\/div>
Fixed<\/div>
Compatibilit\u00e9 BLE de l'Iphone<\/div><\/div>
Added<\/div>
cl\u00e9s \u00e9lectroniques via la connexion BLE<\/div><\/div>
Improved<\/div>
Am\u00e9lioration du taux de rafra\u00eechissement des compteurs V2C 2.0<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de l'OCPP, adaptation \u00e0 la prise en charge des d\u00e9connexions<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de la d\u00e9tection des porte-cl\u00e9s<\/div><\/div>
Fixed<\/div>
Fonctionnement du compteur V2C 2.0 la nuit<\/div><\/div>
Improved<\/div>
Am\u00e9lioration du taux de rafra\u00eechissement<\/div><\/div>
Added<\/div>
Nouvelle langue : roumain<\/div><\/div>
Fixed<\/div>
Date et heure automatiques<\/div><\/div>
Added<\/div>
Enphase version 7.x.x, Solis avec batteries<\/div><\/div>
Fixed<\/div>
Interaction avec Megane<\/div><\/div>
Added<\/div>
Adaptation de la carte d'alimentation i2c<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de la valeur Huawei, am\u00e9lioration du chint Huawei et examen de fin de charge<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.6.18<\/div>
juillet 17, 2023<\/small><\/div><\/div>

Passage \u00e0 la production et corrections mineures<\/p>\n<\/div>

Improved<\/div>
Routine de r\u00e9cup\u00e9ration du WiFi<\/div><\/div>
Added<\/div>
Bug en mode photovolta\u00efque triphas\u00e9<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.6.17<\/div>
juillet 10, 2023<\/small><\/div><\/div>

Am\u00e9lioration et stabilisation de la connexion \u00e0 Azure<\/p>\n<\/div>

Added<\/div>
Charge triphas\u00e9e mixte disponible via le menu physique<\/div><\/div>
Added<\/div>
Ajout d'un compteur MID triphas\u00e9<\/div><\/div>
Added<\/div>
Ajout de l'ID serveur 2 pour les onduleurs SolarEdge<\/div><\/div>
Added<\/div>
Ajout de registres Modbus avec mesure du compteur<\/div><\/div>
Added<\/div>
Ajout de commandes http pour l'int\u00e9gration HA<\/div><\/div>
Added<\/div>
Onduleur Enphase Envoy (beta) (versions 5.x.x)<\/div><\/div>
Added<\/div>
D\u00e9tection de l'erreur V2C 2.0 clamp not connected<\/div><\/div>
Added<\/div>
Esclave MQTT avec authentification par utilisateur\/mot de passe et sujets personnalisables (beta)<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de WhatchDog pour \u00e9viter le blocage du syst\u00e8me<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de l'analyse du WiFi \u00e0 proximit\u00e9<\/div><\/div>
Improved<\/div>
Protocole de reconnexion du service BluetoothLE<\/div><\/div>
Improved<\/div>
Optimisation du WiFi IRAM et affinit\u00e9 avec la t\u00e2che Azure<\/div><\/div>
Improved<\/div>
Protocole de reconnexion en l'absence de WiFi<\/div><\/div>
Improved<\/div>
R\u00e9initialisation d'usine<\/div><\/div>
Improved<\/div>
Code d'erreur et interface LED<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de l'installation isol\u00e9e et du mode de vidage 0<\/div><\/div>
Improved<\/div>
R\u00e9duction du temps de coupure par contr\u00f4le dynamique \u00e0 1 min.<\/div><\/div>
Improved<\/div>
D\u00e9tection automatique de l'heure et du cr\u00e9neau horaire<\/div><\/div>
Improved<\/div>
Optimisation et refonte des esclaves de mesure<\/div><\/div>
Improved<\/div>
D\u00e9verrouillage \u00e0 l'aide d'un tag BLE<\/div><\/div>
Fixed<\/div>
Gel sporadique de l'\u00e9cran LCD<\/div><\/div>
Fixed<\/div>
Faux positifs du d\u00e9tecteur de fuites<\/div><\/div>
Fixed<\/div>
Probl\u00e8mes de compteur MID<\/div><\/div>
Fixed<\/div>
Erreur de LED lors de la mise \u00e0 jour<\/div><\/div>
Fixed<\/div>
Valeur par d\u00e9faut des variables JSON<\/div><\/div>
Fixed<\/div>
Mesure \u00e0 0 sur l'onduleur Deye\/TurboEnergy<\/div><\/div>
Fixed<\/div>
Erreurs visuelles et affectation de l'adresse d'\u00e9quilibrage local<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.4.4<\/div>
mai 31, 2023<\/small><\/div><\/div>

Am\u00e9lioration du calcul de la puissance et de la correction des erreurs<\/p>\n<\/div>

Added<\/div>
Ajout de la configuration de diff\u00e9rents ID pour les onduleurs Huawei.<\/div><\/div>
Fixed<\/div>
Correction du blocage par le mode de paiement et l'OCPP apr\u00e8s la d\u00e9sactivation du mode de paiement et de l'OCPP.<\/div><\/div>
Improved<\/div>
Correction de la lecture de la puissance de la maison<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.3.13<\/div>
mai 23, 2023<\/small><\/div><\/div>

Correction dans le serveur local<\/p>\n<\/div>

Fixed<\/div>
Correction de la taille maximale du fichier de mise \u00e0 jour sur le serveur local<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.6.11<\/div>
avril 13, 2023<\/small><\/div><\/div>

1.6.9 corrections et nouvelles jauges<\/p>\n<\/div>

Added<\/div>
Remise solaire sur les raccourcis<\/div><\/div>
Improved<\/div>
Am\u00e9liorations de l'OCPP et test\u00e9 dans MONTA<\/div><\/div>
Fixed<\/div>
Gel de l'\u00e9cran LCD<\/div><\/div>
Added<\/div>
Onduleur Deye\/TurboEnergy Beta<\/div><\/div>
Added<\/div>
Compteur Phoenix Contact<\/div><\/div>
Added<\/div>
Compteur Carlo Gavazzi<\/div><\/div>
Improved<\/div>
Probl\u00e8mes de contr\u00f4le dynamique<\/div><\/div>
Improved<\/div>
Reconnexions WiFi et stabilit\u00e9<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.6.9<\/div>
mars 27, 2023<\/small><\/div><\/div>

BETA : Fixeos et compteur MID<\/p>\n<\/div>

Added<\/div>
Mode isol\u00e9 dans les modes photovolta\u00efques<\/div><\/div>
Fixed<\/div>
Blocage et d\u00e9blocage inattendus<\/div><\/div>
Fixed<\/div>
Suppression du clignotement blanc en mode bloqu\u00e9<\/div><\/div>
Added<\/div>
Langues n\u00e9erlandaise, danoise et valencienne<\/div><\/div>
Improved<\/div>
Protocole d'\u00e9quilibrage local et priorit\u00e9s<\/div><\/div>
Improved<\/div>
D\u00e9tection de port et d'h\u00f4te dans OCPP<\/div><\/div>
Fixed<\/div>
Erreur de s\u00e9lection des esclaves dans la version b\u00eata<\/div><\/div>
Added<\/div>
Modes de d\u00e9tection des fuites (menu installateur)<\/div><\/div>
Added<\/div>
MID Meter (menu installateur)<\/div><\/div>
Improved<\/div>
Version stable de SMA Sunny Boy<\/div><\/div>
Improved<\/div>
Version portugaise de Wibeee<\/div><\/div>
Improved<\/div>
Fronius mesure la consommation des m\u00e9nages<\/div><\/div>
Fixed<\/div>
Erreur d'onduleur triphas\u00e9 SolarEdge<\/div><\/div>
Added<\/div>
Nouveau protocole Ingeteam (gestion de la batterie)<\/div><\/div>
Added<\/div>
Compteurs triphas\u00e9s DTSU666<\/div><\/div>
Added<\/div>
Compteurs triphas\u00e9s SDM<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.6.8<\/div>
mars 3, 2023<\/small><\/div><\/div>

Am\u00e9liorations g\u00e9n\u00e9rales<\/p>\n<\/div>

Added<\/div>
Modifications et am\u00e9liorations de l'\u00e9talonnage<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.6.7<\/div>
janvier 30, 2023<\/small><\/div><\/div>

Calibration pour le nouveau mat\u00e9riel<\/p>\n<\/div>

Improved<\/div>
Calibration adapt\u00e9e au nouveau mat\u00e9riel<\/div><\/div>
Fixed<\/div>
Correction de l'analyse des donn\u00e9es sur Kostal Piko<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.6.5<\/div>
janvier 23, 2023<\/small><\/div><\/div>

Equilibrage local et am\u00e9liorations g\u00e9n\u00e9rales<\/p>\n<\/div>

Added<\/div>
Equilibrage local entre Trydans disponible via WiFi ou c\u00e2blage<\/div><\/div>
Fixed<\/div>
Correction d'un bug dans l'intensit\u00e9 maximale et minimale via modbus<\/div><\/div>
Improved<\/div>
Tension d'installation configurable<\/div><\/div>
Added<\/div>
SDM-220\/320\/120 (Test\u00e9 avec la marque Eastron)<\/div><\/div>
Added<\/div>
Compteur DDSU-666 (courant dans les installations Huawei)<\/div><\/div>
Added<\/div>
Calibrage automatique sans voiture<\/div><\/div>
Added<\/div>
Temps manuel disponible<\/div><\/div>
Improved<\/div>
Nouveau processus de fabrication<\/div><\/div>
Fixed<\/div>
Correction des faux positifs dans le d\u00e9tecteur de fuites<\/div><\/div>
Added<\/div>
Requ\u00eates HTTP pour g\u00e9rer les journaux<\/div><\/div>
Added<\/div>
Nouveaux registres Modbus<\/div><\/div>
Improved<\/div>
Incluant Shelly triphas\u00e9 mais pas de mesure PV<\/div><\/div>
Added<\/div>
Onduleurs Greenheiss<\/div><\/div>
Added<\/div>
Onduleurs SAJ<\/div><\/div>
Added<\/div>
Onduleurs Solis c\u00e2bl\u00e9s<\/div><\/div>
Improved<\/div>
Correction de la consommation de voiture par MQTT<\/div><\/div>
Added<\/div>
Temps de r\u00e9ponse du contr\u00f4le dynamique configurable<\/div><\/div>
Compatibility<\/div>
Mod\u00e8les beta de Goodwe : mesure de la batterie non prise en compte<\/div><\/div>
Improved<\/div>
Menu physique am\u00e9lior\u00e9 et plus intuitif<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.5.10<\/div>
d\u00e9cembre 12, 2022<\/small><\/div><\/div>

Corrections dans Shelly avec des crashs triphasiques uniquement et Goodwe<\/p>\n<\/div>

Added<\/div>
Pr\u00e9vention des conflits entre les esclaves et le nuage<\/div><\/div>
Fixed<\/div>
Conflits d'initialisation entre GoodWe et Azure<\/div><\/div>
Fixed<\/div>
Correction sur Shelly avec 3 phases seulement<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.5.9<\/div>
novembre 28, 2022<\/small><\/div><\/div>

Modbus Hotfix et erreur avec les notifications<\/p>\n<\/div>

Improved<\/div>
Envoi des statistiques en attente une seule fois<\/div><\/div>
Fixed<\/div>
Correctif pour les lectures multiples Modbus<\/div><\/div>
Improved<\/div>
Shelly 3EM triphas\u00e9 et modification pour le Portugal<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.5.8<\/div>
novembre 22, 2022<\/small><\/div><\/div>

Am\u00e9liorations g\u00e9n\u00e9rales, calibration et raccourcis WiFi<\/p>\n<\/div>

Improved<\/div>
Am\u00e9liorations de l'OCPP<\/div><\/div>
Added<\/div>
Nouveaux registres Modbus<\/div><\/div>
Added<\/div>
Lecteur RFID dans la version alpha<\/div><\/div>
Fixed<\/div>
\u00c9chec du fuseau horaire Bluetooth<\/div><\/div>
Added<\/div>
Compatible avec le SolaX X3 hybride<\/div><\/div>
Improved<\/div>
Am\u00e9lioration du balayage WiFis<\/div><\/div>
Fixed<\/div>
Trydan - \u00c9chec de la synchronisation de l'APP<\/div><\/div>
Improved<\/div>
Am\u00e9lioration des routines de reconnexion<\/div><\/div>
Fixed<\/div>
Configuration de l'IP statique dans Trydan via WFi<\/div><\/div>
Fixed<\/div>
Erreur dans la sauvegarde des param\u00e8tres Modbus<\/div><\/div>
Added<\/div>
Calibration et raccourcis via WiFi disponibles<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.5.6_jungle<\/div>
octobre 26, 2022<\/small><\/div><\/div>

Communication automobile, \u00e9talonnage et hybrides GoodWe<\/p>\n<\/div>

Added<\/div>
Nouvelle m\u00e9thode d'\u00e9talonnage de la communication embarqu\u00e9e<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de l'analyse de la communication embarqu\u00e9e<\/div><\/div>
Added<\/div>
Version b\u00eata de GoodWe ET\/EH\/BT\/BH<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.5.5_jungle<\/div>
octobre 17, 2022<\/small><\/div><\/div>

Nouveau contr\u00f4le dynamique et nouveaux onduleurs<\/p>\n<\/div>

Improved<\/div>
Repenser l'algorithme de contr\u00f4le dynamique<\/div><\/div>
Improved<\/div>
Am\u00e9lioration du taux de rafra\u00eechissement des onduleurs Huawei<\/div><\/div>
Improved<\/div>
SolarEdge stable (exportation de la mesure du compteur)<\/div><\/div>
Added<\/div>
Verrouillage automatique apr\u00e8s 60 secondes sans voiture (raccourci)<\/div><\/div>
Added<\/div>
Modification pour les installations triphas\u00e9es au Portugal pour V2C 2.0<\/div><\/div>
Added<\/div>
Ajout de Kostal Piko<\/div><\/div>
Fixed<\/div>
Sauvegarde de la m\u00e9moire apr\u00e8s les \u00e9critures via Modbus TCP et RTU<\/div><\/div>
Improved<\/div>
Version stable de GoodWe<\/div><\/div>
Fixed<\/div>
Bug dans les mesures PV et peak r\u00e9solu pour V2C 2.0<\/div><\/div>
Improved<\/div>
D\u00e9tection de l'\u00e9tat D et E selon le protocole<\/div><\/div>
Improved<\/div>
Am\u00e9lioration du processus d'assurance qualit\u00e9<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.5.4<\/div>
septembre 26, 2022<\/small><\/div><\/div>

Am\u00e9liorations d’Azure et v\u00e9rification de la charge<\/p>\n<\/div>

Added<\/div>
GoodWe en version b\u00eata<\/div><\/div>
Added<\/div>
MQTT dans la version stable<\/div><\/div>
Added<\/div>
V\u00e9rification de l'\u00e9tat de charge pour \u00e9viter les charges courtes (voiture \u00e0 100% ou en charge programm\u00e9e)<\/div><\/div>
Improved<\/div>
Victron dans la version stable<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de la connexion \u00e0 Azure<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.5.3<\/div>
septembre 16, 2022<\/small><\/div><\/div>

Patch onduleur en version beta et esclave MQTT<\/p>\n<\/div>

Improved<\/div>
D\u00e9tection de la puissance dans Wibeee<\/div><\/div>
Fixed<\/div>
Les onduleurs Victron et SolarEdge faisaient planter le syst\u00e8me.<\/div><\/div>
Added<\/div>
Version b\u00eata de l'esclave MQTT<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.5.2<\/div>
septembre 14, 2022<\/small><\/div><\/div>

Nouveaux compteurs et corrections de bugs<\/p>\n<\/div>

Added<\/div>
Ajout de l'onduleur SolarEdge ( Beta )<\/div><\/div>
Added<\/div>
Onduleur Victron ajout\u00e9 ( Beta )<\/div><\/div>
Added<\/div>
Autoblocage activ\u00e9 dans le raccourci (60 s)<\/div><\/div>
Added<\/div>
D\u00e9tection automatique du fuseau horaire<\/div><\/div>
Fixed<\/div>
Correction d'une erreur en mode puissance minimale<\/div><\/div>
Added<\/div>
Compteur alternatif pour la consommation de la voiture (RS485)<\/div><\/div>
Added<\/div>
PV exclusif avec variation configurable<\/div><\/div>
Added<\/div>
Nouvelles langues (fran\u00e7ais, italien et allemand)<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.5.1<\/div>
septembre 5, 2022<\/small><\/div><\/div>

Am\u00e9liorations dans la version 1.5.0<\/p>\n<\/div>

Fixed<\/div>
Correction de probl\u00e8mes dans la configuration de l'IP Trydan avec WiFi et BLE<\/div><\/div>
Fixed<\/div>
Correction des probl\u00e8mes de configuration de l'IP Shelly BLE<\/div><\/div>
Improved<\/div>
Am\u00e9lioration du contr\u00f4le dynamique avec les batteries<\/div><\/div>
Improved<\/div>
Am\u00e9lioration du contr\u00f4le dynamique dans les installations triphas\u00e9es (mode exclusif et puissance minimale)<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.5.0<\/div>
ao\u00fbt 29, 2022<\/small><\/div><\/div>

Nouvelles jauges, corrections de bugs et autres options<\/p>\n<\/div>

Added<\/div>
Inclusion du compteur Wibeee<\/div><\/div>
Added<\/div>
Slave 2.0 compatible avec les installations de type 1 et de type 2<\/div><\/div>
Added<\/div>
Modification du clignotement de la connexion \u00e9tablie<\/div><\/div>
Updated<\/div>
Premi\u00e8re version stable d'Ingeteam<\/div><\/div>
Updated<\/div>
Am\u00e9lioration de la vitesse du d\u00e9tecteur de fuites<\/div><\/div>
Improved<\/div>
Inclusion de l'intensit\u00e9 maximale dans OCPP (comme propri\u00e9t\u00e9)<\/div><\/div>
Added<\/div>
D\u00e9tection et mesure de la charge biphas\u00e9e<\/div><\/div>
Added<\/div>
Am\u00e9lioration de la collecte et de la transmission des donn\u00e9es de charge<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de la lecture des onduleurs Solax<\/div><\/div>
Improved<\/div>
Inclusion des batteries dans les onduleurs Huawei, Ingeteam et Fronius<\/div><\/div>
Improved<\/div>
Serveur ModbusRTU et Modbus TCP dans Trydan<\/div><\/div>
Added<\/div>
Compteur alternatif Phoenix Contact (ModbusRTU)<\/div><\/div>
Added<\/div>
ModbusRTU \u00e0 Trydan (esclave et ma\u00eetre simultan\u00e9s)<\/div><\/div>
Added<\/div>
Configuration IP statique sur Trydan<\/div><\/div>
Added<\/div>
Possibilit\u00e9 de s\u00e9lectionner l'IP dans Shelly<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.4.9<\/div>
juillet 25, 2022<\/small><\/div><\/div>

Correction dans les \u00e9quipements de production : ils ne sauvegardent pas le WiFi<\/p>\n<\/div>

Fixed<\/div>
Correction d'un bug dans la production lors de la sauvegarde du WiFi<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.4.6<\/div>
juillet 16, 2022<\/small><\/div><\/div>

Mise en \u0153uvre de l’OCPP pour les assistants \u00e0 domicile et am\u00e9liorations g\u00e9n\u00e9riques<\/p>\n<\/div>

Added<\/div>
Ping interne d'Azure \u00e0 15 secondes pour d\u00e9tecter les d\u00e9connexions<\/div><\/div>
Improved<\/div>
Migration de l'horloge et du LCD I2C vers l'idf natif<\/div><\/div>
Added<\/div>
Reconnexions s\u00e9par\u00e9es pour \u00e9viter les temps d'arr\u00eat du serveur<\/div><\/div>
Added<\/div>
Adaptation de l'OCPP pour fonctionner avec Home Assistant<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.4.8<\/div>
juillet 8, 2022<\/small><\/div><\/div>

Am\u00e9liorations comportementales signal\u00e9es par les clients<\/p>\n<\/div>

Added<\/div>
\u00c9limination des fausses erreurs de communication des esclaves<\/div><\/div>
Added<\/div>
Sauvegarde du premier Shelly auquel Trydan se connecte<\/div><\/div>
Updated<\/div>
Avec le contr\u00f4le dynamique d\u00e9sactiv\u00e9, conserver l'intensit\u00e9 apr\u00e8s l'arriv\u00e9eProgrammedSaveMode<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.4.7<\/div>
juillet 4, 2022<\/small><\/div><\/div>

Am\u00e9liorations de l’analyse OCPP et WiFi<\/p>\n<\/div>

Improved<\/div>
Am\u00e9lioration de la r\u00e9cup\u00e9ration des donn\u00e9es t\u00e9l\u00e9m\u00e9triques dans l'OCPP<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de l'analyse des WiFi \u00e0 proximit\u00e9<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.4.5<\/div>
juin 6, 2022<\/small><\/div><\/div>

Corrections de bugs mineurs<\/p>\n<\/div>

Fixed<\/div>
R\u00e9cup\u00e9ration des transactions OCPP pour \u00e9viter les \u00e9checs de t\u00e9l\u00e9m\u00e9trie<\/div><\/div>
Improved<\/div>
Augmentation de la taille maximale des binaires sur le serveur web local<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.4.2<\/div>
mai 23, 2022<\/small><\/div><\/div>

Inclusion de l’OCPP, mode de paiement et am\u00e9lioration de l’onduleur<\/p>\n<\/div>

Improved<\/div>
Am\u00e9lioration de la stabilit\u00e9 et de la reconnexion du WiFi et du Bluetooth.<\/div><\/div>
Fixed<\/div>
Am\u00e9lioration de la reconnexion de l'onduleur et correction apr\u00e8s la mise \u00e0 jour des Huawei SUN2000s.<\/div><\/div>
Added<\/div>
Mode de paiement (paiements V2C)<\/div><\/div>
Added<\/div>
Protocole OCPP<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.3.12<\/div>
mai 2, 2022<\/small><\/div><\/div>

Am\u00e9lioration de la deuxi\u00e8me version de fabrication de Trydan<\/p>\n<\/div>

Fixed<\/div>
Correction des routines Shelly et Solax<\/div><\/div>
Added<\/div>
Liste des WiFi disponibles chez Trydan (pour visualisation depuis iPhone et Android)<\/div><\/div>
Improved<\/div>
Reconnexion avec V2C Cloud apr\u00e8s perte de communication<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
1.3.7<\/div>
avril 14, 2022<\/small><\/div><\/div>

Deuxi\u00e8me version de production de Trydan<\/p>\n<\/div>

Added<\/div>
Raccourcis sur les boutons : Verrouiller et charger la programmation<\/div><\/div>
Improved<\/div>
Am\u00e9lioration du code d'erreur de la LED<\/div><\/div>
Added<\/div>
Page web de configuration locale Trydan accessible via AP ou STA WiFi<\/div><\/div>
Added<\/div>
Mode AP lorsque le WiFi configur\u00e9 n'est pas disponible<\/div><\/div>
Improved<\/div>
Adaptation pour la compatibilit\u00e9 avec l'onduleur Huawei<\/div><\/div><\/div><\/div><\/div>
1.2.2<\/div>
mars 15, 2022<\/small><\/div><\/div>

Am\u00e9liorations suppl\u00e9mentaires<\/p>\n<\/div>

Improved<\/div>
Am\u00e9lioration de l'\u00e9criture sur l'\u00e9cran et nettoyage des caract\u00e8res \u00e9tranges.<\/div><\/div>
Improved<\/div>
Am\u00e9lioration de l'envoi de statistiques via WiFi et BLE<\/div><\/div>
Added<\/div>
Ajout de la connectivit\u00e9 avec les onduleurs Fronius<\/div><\/div><\/div><\/div><\/div>
1.1.0<\/div>
f\u00e9vrier 4, 2022<\/small><\/div><\/div>

Premi\u00e8re version stable de Trydan. Premi\u00e8re version de production<\/p>\n<\/div>

Added<\/div>
Correction des bogues x et y<\/div><\/div><\/div><\/div><\/div><\/div>\n<\/div><\/div>\n\n\n\n
\n

Pole Pro<\/h2><\/div>\n\n\n\n

Si vous pr\u00e9f\u00e9rez consulter les mises \u00e0 jour de la version pr\u00e9c\u00e9dente de Pole, cliquez ici<\/a>.<\/p>\n\n\n

5.1.9<\/div>
mars 23, 2026<\/small><\/div><\/div>
Added<\/div>
Support for TPV QA.<\/div><\/div>
Added<\/div>
Implementation of a Slider element in the interface.<\/div><\/div>
Improved<\/div>
Increased `tag_duplication_time` to 15s to improve user experience.<\/div><\/div>
Improved<\/div>
Optimized transaction closing to prevent race conditions.<\/div><\/div>
Fixed<\/div>
Minor bug fixes and general stability improvements.<\/div><\/div><\/div><\/div><\/div>
5.1.10<\/div>
mars 11, 2026<\/small><\/div><\/div>
Added<\/div>
Implementation of a Slider element in the interface.<\/div><\/div>
Improved<\/div>
Optimized transaction closing to prevent race conditions.<\/div><\/div>
Fixed<\/div>
General stability improvements.<\/div><\/div><\/div><\/div><\/div>
5.1.4<\/div>
f\u00e9vrier 27, 2026<\/small><\/div><\/div>
Added<\/div>
Support for connector 0 in local and remote OCPP StartTransaction.<\/div><\/div><\/div><\/div><\/div>
5.1.2<\/div>
f\u00e9vrier 9, 2026<\/small><\/div><\/div>
Fixed<\/div>
Hotfix for the charger reboot process.<\/div><\/div>
Fixed<\/div>
OCPP hotfix for handling multiple remote stops in short intervals.<\/div><\/div>
Fixed<\/div>
Corrections in freecharge and MeterValues transmission in OCPP.<\/div><\/div><\/div><\/div><\/div>
5.0.0<\/div>
janvier 8, 2026<\/small><\/div><\/div>
Added<\/div>
**Major Migration**: OCPP protocol has been migrated to the shared library (`shared`).<\/div><\/div>
Added<\/div>
**Major Migration**: HTTP server has been redesigned and migrated to `shared`.<\/div><\/div>
Added<\/div>
Added data recovery system for OCPP from legacy format (.txt).<\/div><\/div>
Added<\/div>
Implemented functionality to unlock connectors from the web server.<\/div><\/div>
Added<\/div>
Automatic boot configuration for the Spare Module.<\/div><\/div>
Added<\/div>
Support for configuring IP mode (public\/private) in 4G connections.<\/div><\/div>
Improved<\/div>
Enhanced RFID reader calibration with on-screen visual indicators.<\/div><\/div>
Improved<\/div>
Charger now only reboots if no car is connected, regardless of the mode.<\/div><\/div>
Improved<\/div>
Improved WiFi module boot sequence.<\/div><\/div>
Improved<\/div>
Support for generating staging URLs in QR codes.<\/div><\/div>
Improved<\/div>
Updated `shared-py` to include AT command improvements and signal management.<\/div><\/div>
Improved<\/div>
`wireconnectedchange` notifications are now sent on every connect\/disconnect while payments are active.<\/div><\/div>
Fixed<\/div>
Loosened "measurements out of bounds" limits to prevent false positives.<\/div><\/div>
Fixed<\/div>
Fixed persistent price display on screen when payments are active.<\/div><\/div><\/div><\/div><\/div>
4.4.14<\/div>
novembre 4, 2025<\/small><\/div><\/div>
Improved<\/div>
Adjusted cooldown time if a leak is detected between charges.<\/div><\/div>
Improved<\/div>
Added `reset_charger` property in case of leak detection.<\/div><\/div><\/div><\/div><\/div>
4.5.0-rc2<\/div>
octobre 20, 2025<\/small><\/div><\/div>
Added<\/div>
WiFi signal update control.<\/div><\/div>
Added<\/div>
Leak detector enable\/disable via Redis property.<\/div><\/div>
Added<\/div>
Initialization of `SpiLockManager` to improve communication stability.<\/div><\/div>
Added<\/div>
Option to disable Wi-Fi from the Installer Panel.<\/div><\/div>
Added<\/div>
Sending registered tags and RFID cards to the system.<\/div><\/div>
Added<\/div>
Implementation of a thread monitor for automatic recovery of key processes.<\/div><\/div>
Added<\/div>
New error reporting system to the cloud.<\/div><\/div>
Improved<\/div>
Added cache to timers to optimize performance.<\/div><\/div>
Improved<\/div>
Removed pure Python implementation for CRC-16 (performance improvement).<\/div><\/div>
Improved<\/div>
Reduced Redis connections and migrated last charge status to Redis.<\/div><\/div>
Improved<\/div>
Periodic RAM-to-Flash log dumping.<\/div><\/div>
Fixed<\/div>
Fixed meter register block calculation<\/div><\/div>
Fixed<\/div>
isabled buzzer on V2 version boards.<\/div><\/div><\/div><\/div><\/div>
4.4.13<\/div>
octobre 14, 2025<\/small><\/div><\/div>
Improved<\/div>
Offline message queue improvements for higher reliability.<\/div><\/div><\/div><\/div><\/div>
4.4.12<\/div>
octobre 3, 2025<\/small><\/div><\/div>
Added<\/div>
- Added Basque language.<\/div><\/div>
Improved<\/div>
- When OCPP is active, we now show on screen when card passed is not registered in central system.<\/div><\/div>
Fixed<\/div>
- After update OCPP image and QR is now recovered.<\/div><\/div><\/div><\/div><\/div>
4.4.8<\/div>
ao\u00fbt 27, 2025<\/small><\/div><\/div>
Fixed<\/div>
- Fixed OCPP crash when phase map configuration does not correspond with measurer type.<\/div><\/div>
Fixed<\/div>
- Fixed issue where it didn't allow a remote start if a car is connected but not in an active transaction.<\/div><\/div>
Fixed<\/div>
- Fixed issue in setup interface.<\/div><\/div>
Fixed<\/div>
- Fixed monophasic Carlo Gavazzi measurer.<\/div><\/div>
Fixed<\/div>
- Fixed OCPP issue where it wouldn't charge in connector 2 if connector 1 is charging.<\/div><\/div><\/div><\/div><\/div>
4.4.3<\/div>
juillet 17, 2025<\/small><\/div><\/div>
Improved<\/div>
- Optimised automatic system reboot to reduce system load.<\/div><\/div>
Improved<\/div>
- Improved network features mainly 4G connection.<\/div><\/div><\/div><\/div><\/div>
4.4.1<\/div>
juin 24, 2025<\/small><\/div><\/div>
Improved<\/div>
- Improved OCPP charge handling.<\/div><\/div>
Improved<\/div>
- Enhanced reliability in the smart charging logic.<\/div><\/div>
Improved<\/div>
- Improved features when stopping a charge with invalid identifiers.<\/div><\/div>
Improved<\/div>
- Improved QR configuration for OCPP.<\/div><\/div>
Improved<\/div>
- Improved error handling when sensors or communication components fail.<\/div><\/div>
Improved<\/div>
- Better log management to prevent the device\u2019s storage from filling up.<\/div><\/div>
Improved<\/div>
- Improved USB connection features.<\/div><\/div>
Added<\/div>
- The charger can now display a message when charging is limited due to low power.<\/div><\/div>
Improved<\/div>
- Improved RFID calibration and detection display.<\/div><\/div>
Improved<\/div>
- Improved features related to Bluetooth.<\/div><\/div>
Improved<\/div>
- Improved dynamic power control allowing charge at minimum intensity if master is not detected.<\/div><\/div><\/div><\/div><\/div>
4.1.1<\/div>
mai 6, 2025<\/small><\/div><\/div>
Added<\/div>
- System time is now synced with the central system when OCPP is active, ensuring accurate time reporting<\/div><\/div>
Added<\/div>
- Manual timezone setting is now available \u2013 The user will be able to configure the timezone even if automatic detection is disabled<\/div><\/div>
Improved<\/div>
- Improved updater<\/div><\/div>
Added<\/div>
- Created a contingency page in case app is not running<\/div><\/div>
Fixed<\/div>
- When locking a connector while charging, it now sends end charge telemetry correctly<\/div><\/div>
Improved<\/div>
- Improved network connections<\/div><\/div>
Fixed<\/div>
- Fixed dynamic control issues<\/div><\/div>
Improved<\/div>
- Improved OCPP meter values<\/div><\/div>
Added<\/div>
- Added Italian option for screen<\/div><\/div>
Improved<\/div>
- Improved discovering devices when dynamic control is active<\/div><\/div>
Improved<\/div>
- Improved user interface when updates are in progress<\/div><\/div>
Improved<\/div>
- Local load balancing is now implemented as dynamic control based specific conditions<\/div><\/div>
Improved<\/div>
- Improved Bluetooth connection<\/div><\/div>
Improved<\/div>
- Improved 4g connections robustness<\/div><\/div>
Fixed<\/div>
- Fixed Carlo Gavazzi power meter<\/div><\/div>
Added<\/div>
- Added default payment QR to pay without app<\/div><\/div>
Fixed<\/div>
- Fixed OCPP LMS, diagnostics, and charging profile clearing<\/div><\/div>
Improved<\/div>
- Improved STM32 lock timings<\/div><\/div>
Added<\/div>
- Added new OCPP personalization options - The user can now set 2 QR codes on the screen<\/div><\/div>
Improved<\/div>
- Improved OCPP now allows external intensity limits<\/div><\/div>
Improved<\/div>
- Improved data consumption<\/div><\/div><\/div><\/div><\/div>
3.7.1<\/div>
janvier 14, 2025<\/small><\/div><\/div>
Added<\/div>
- TPV<\/div><\/div>
Added<\/div>
- Added shared library<\/div><\/div>
Fixed<\/div>
- Fixed power control issues<\/div><\/div>
Improved<\/div>
- Improved version\/update manager<\/div><\/div>
Fixed<\/div>
- Fixed that when locking connector during a charge it now ends correctly<\/div><\/div>
Improved<\/div>
- Improved megabyte conversion of Network Monitor<\/div><\/div>
Fixed<\/div>
- Recalculate reboot time when changing time with ble<\/div><\/div>
Improved<\/div>
- Obtaining timezone now doesn't need to have correct time by using only http urls<\/div><\/div>
Added<\/div>
- Timezone can be set manually<\/div><\/div>
Improved<\/div>
- Mobile usb device name is now obtained dynamically since more usb ports might be used due to TPV<\/div><\/div>
Added<\/div>
- Time is now synced with Central System if OCPP is active<\/div><\/div>
Fixed<\/div>
- We now show on screen when non registered RFID is passed while OCPP is active<\/div><\/div>
Fixed<\/div>
- Fixed OCPP freemode rfid issues<\/div><\/div>
Fixed<\/div>
- Duplicate StatusNotifications are removed from offline queue<\/div><\/div>
Fixed<\/div>
- Fixed "infinite" OCPP offline queue issue<\/div><\/div><\/div><\/div><\/div>
3.6.23.1<\/div>
octobre 3, 2024<\/small><\/div><\/div>
Added<\/div>
- Modbus tcp server that can read and modify certain properties of the charger<\/div><\/div>
Improved<\/div>
- We now show on screen different wifi images depending on how strong signal is to let know the user how good the connection is<\/div><\/div>
Improved<\/div>
- General OCPP improvements: we check connection to CS instead of internet for local functioning, we notify a real value now when there's a stop transaction due to power loss, fixed edge cases where connectivity is lost, new ocpp key MaxEVCurrentOffered implemented which limits charge with key instead of smart charging handler, safety mechanisms for ocpp to be more robust<\/div><\/div>
Improved<\/div>
- In 4g, increased rssi range for "excellent" so that it indicates correctly when the reception is good<\/div><\/div>
Updated<\/div>
- Access point time increased to 15 minutes<\/div><\/div>
Improved<\/div>
- Improved data consumption<\/div><\/div>
Fixed<\/div>
- Handled issues when SSID has whitespace<\/div><\/div>
Added<\/div>
- APN can now be set manually<\/div><\/div>
Improved<\/div>
- Improved robustness of update<\/div><\/div><\/div><\/div><\/div>
3.5.22<\/div>
juillet 23, 2024<\/small><\/div><\/div>
Fixed<\/div>
- Access point improvements.<\/div><\/div>
Fixed<\/div>
- Fixed QA issues.<\/div><\/div>
Added<\/div>
- Added Carlo Gavazzi debug measures.<\/div><\/div><\/div><\/div><\/div>
3.5.19<\/div>
juin 25, 2024<\/small><\/div><\/div>
Fixed<\/div>
- Fixed issue where things on screen were missing in one connector chargers.<\/div><\/div>
Updated<\/div>
- Fixed BLE connection with iphone and fixed bluetooth communication error that appeared on app.<\/div><\/div>
Improved<\/div>
- Fixed unset RFID.<\/div><\/div>
Updated<\/div>
- Network improvements. No interface resets performed at boot which improves bootup time. Network changes now don't require reboot. When changing WIFI settings or ip ethernet settings, it connects after setting it instead of rebooting.<\/div><\/div>
Improved<\/div>
- Fixed Unknown measurer and made distinction between Unknown measurer and wrongly configured measurer.<\/div><\/div>
Added<\/div>
- New telemetry event for payment mode.<\/div><\/div>
Added<\/div>
- New direct method to obtain additional information for Smart Charging.<\/div><\/div>
Fixed<\/div>
- Fixed time\/timezone issue caused when the date is off by a few days.<\/div><\/div>
Added<\/div>
- Fixed random reboot time.<\/div><\/div>
Fixed<\/div>
- New property added to toggle if vehicle should be able to charge even though measurers aren't working ( Only works when OCPP, payments or dynamic control isn't enabled ).<\/div><\/div>
Improved<\/div>
- OCPP Free mode can be toggled through OCPP keys.<\/div><\/div><\/div><\/div><\/div>
3.5.5<\/div>
mai 7, 2024<\/small><\/div><\/div>
Fixed<\/div>
- Increased SAS token time to live of azure.<\/div><\/div>
Added<\/div>
- Improved message on screen when car is in state B.<\/div><\/div>
Added<\/div>
- Reflect on screen when charge is paused.<\/div><\/div>
Added<\/div>
- Made reboot time random.<\/div><\/div><\/div><\/div><\/div>
3.5.0<\/div>
avril 25, 2024<\/small><\/div><\/div>
Fixed<\/div>
- Fixed set threshold values and neopixel leds of Stm32. We can now also obtain control pilot value from Stm32.<\/div><\/div>
Added<\/div>
- We now show on the screen when the next programmed charge will start.<\/div><\/div>
Improved<\/div>
- Fixed OCPP inverted measurer error.<\/div><\/div>
Fixed<\/div>
- OCPP ConnectionTimeOut value can now be changed on the fly.<\/div><\/div>
Fixed<\/div>
- We now report iccid of sim card is connected. If sim is connected but we can't obtain iccid, we send dead letter.<\/div><\/div>
Updated<\/div>
- Changed led colors. Switched State A (now white) and State B (now green) colors.<\/div><\/div>
Fixed<\/div>
- Fixed log download of http interface.<\/div><\/div>
Improved<\/div>
- Added mechanism to disable or enable Wifi and bluetooth.<\/div><\/div>
Added<\/div>
- Changes made to reduce network usage that can be toggled on or off.<\/div><\/div>
Improved<\/div>
- We now report information regarding which type of connection to the internet the e-charger has.<\/div><\/div>
Added<\/div>
- Fixed case where config is corrupted or missing and would give trouble at startup.<\/div><\/div>
Added<\/div>
- We now send dead letter if cpu gets too hot and cpu temperature is now logged.<\/div><\/div><\/div><\/div><\/div>
3.4.35<\/div>
avril 12, 2024<\/small><\/div><\/div>
Added<\/div>
- Improved 4g initialization.<\/div><\/div>
Added<\/div>
- LTE signal is now reflected correctly instead of always showing great signal.<\/div><\/div>
Improved<\/div>
- Fixed wathdog reboot after doing hard reset.<\/div><\/div><\/div><\/div><\/div>
3.4.18<\/div>
f\u00e9vrier 26, 2024<\/small><\/div><\/div>

NOT DOWNGRADEABLE TO VERSION 3.3.1<\/p>\n<\/div>

Updated<\/div>
- General bug fixes.<\/div><\/div>
Added<\/div>
- Added dynamic photovoltaic.<\/div><\/div>
Improved<\/div>
- Improvements in dynamic control, fabrication, QA, Azure, OCPP, config handling, 4g, access point and stm32.<\/div><\/div>
Added<\/div>
- Added dead letters: measurer fails and kernel error.<\/div><\/div>
Improved<\/div>
- We now obtain timezone through url.<\/div><\/div>
Improved<\/div>
- Removed raspbian logo and desktop during boot and added V2C logo.<\/div><\/div>
Added<\/div>
- Property "wifi_info" is now reported.<\/div><\/div>
Added<\/div>
- Property "wifi_static" can be set through ble.<\/div><\/div>
Added<\/div>
- We can now obtain statistics through direct method.<\/div><\/div>
Fixed<\/div>
- When downgrading we ensure that version we downgrade to is compatible.<\/div><\/div>
Added<\/div>
- Added individual log level for each type of logger.<\/div><\/div>
Added<\/div>
- Added neopixel led type for stm32.<\/div><\/div>
Improved<\/div>
- Changed default language after fabrication from english to spanish.<\/div><\/div>
Added<\/div>
- We can now set threshold values with stm32 and get control pilot value if debug log of "Stm32" is activated.<\/div><\/div><\/div><\/div><\/div>
3.3.1<\/div>
novembre 20, 2023<\/small><\/div><\/div>
Improved<\/div>
- Properties "powerweekday", "powerweekend" and "phase_map" can be changed through bluetooth.<\/div><\/div>
Improved<\/div>
- Changed configuration handling to differentiate internally and externally set variables so that externally set or obtained variables are handled accordingly following the property schemas.<\/div><\/div>
Added<\/div>
- We can now set ethernet static ip configuration through the access point interface and direct method.<\/div><\/div>
Fixed<\/div>
- We now report wifi_static with static ip configuration.<\/div><\/div>
Fixed<\/div>
- Statistics are now saved locally.<\/div><\/div>
Added<\/div>
- Fixed property "ocpp" change bug.<\/div><\/div><\/div><\/div><\/div>
3.3.0<\/div>
novembre 15, 2023<\/small><\/div><\/div>
Added<\/div>
- Minor changes in meter reads.<\/div><\/div>
Fixed<\/div>
- Validate configuration with schemas during loading.<\/div><\/div>
Improved<\/div>
- Measurer fails are now registered with modbusrtumeasurer.<\/div><\/div>
Improved<\/div>
- Screen font bigger for small title.<\/div><\/div><\/div><\/div><\/div>
3.2.4<\/div>
novembre 9, 2023<\/small><\/div><\/div>
Added<\/div>
- Direct method to change ocpp interface and ocpp freemode.<\/div><\/div>
Improved<\/div>
- Fixed error 3 not appearing on screen.<\/div><\/div>
Improved<\/div>
- Fixed energy by hour bug.<\/div><\/div>
Added<\/div>
- OCPP authorize can now function by connector.<\/div><\/div>
Added<\/div>
- OCPP WSS connection.<\/div><\/div>
Improved<\/div>
- Changed measurer reading approach for faster reads.<\/div><\/div>
Improved<\/div>
- With dynamic balancing we now show used and available power in frontend.<\/div><\/div>
Added<\/div>
- Fixed OCPP parent id tag bug.<\/div><\/div>
Added<\/div>
- OCPP meter values now work for 3 phases.<\/div><\/div><\/div><\/div><\/div>
3.2.3<\/div>
novembre 2, 2023<\/small><\/div><\/div>
Improved<\/div>
- Added changing dynamic configuration through bluetooth.<\/div><\/div>
Improved<\/div>
- We show dynamic balancing information on screen.<\/div><\/div>
Improved<\/div>
- Simplified handling of configuration.<\/div><\/div>
Improved<\/div>
- Improved dynamic balancing.<\/div><\/div><\/div><\/div><\/div>
3.2.2<\/div>
octobre 27, 2023<\/small><\/div><\/div>
Improved<\/div>
- Charger won't reboot if car is in state B and OCPP or Payments is active.<\/div><\/div>
Improved<\/div>
- When car changes from state C to B, charge information will persist on screen.<\/div><\/div>
Added<\/div>
- Mobile initialization routine where apn is configured.<\/div><\/div>
Improved<\/div>
- Current state charge now reports errors.<\/div><\/div>
Improved<\/div>
- Added configuration property validation.<\/div><\/div>
Fixed<\/div>
- Direct method to obtain dynamic balancing information.<\/div><\/div>
Fixed<\/div>
- General dynamic balancing improvements.<\/div><\/div>
Fixed<\/div>
- OCPP improvements.<\/div><\/div><\/div><\/div><\/div>
3.2.1<\/div>
octobre 16, 2023<\/small><\/div><\/div>
Added<\/div>
- Improved balancing algorithm.<\/div><\/div>
Fixed<\/div>
- Changed remaining set_basic_unreported_config to set_basic_config.<\/div><\/div><\/div><\/div><\/div>
3.2.0<\/div>
octobre 6, 2023<\/small><\/div><\/div>
Added<\/div>
- Dynamic control implemented.<\/div><\/div>
Improved<\/div>
- Removed non-repetitive logger.<\/div><\/div>
Updated<\/div>
- Refactored config charge box. Removed BASIC_UNREPORTED and created whitelist of properties to report.<\/div><\/div>
Fixed<\/div>
- Fixed payment bug where a charge couldn't be started properly if charge was started with the hose unlocked.<\/div><\/div>
Fixed<\/div>
- Fix bug with power being zero, dynamic control failing when there are no connectors.<\/div><\/div>
Added<\/div>
- Fix dynamic control bug, powerbytram is not being updated.<\/div><\/div>
Added<\/div>
- Fixed bug where whitelist of reported items wasn't being applied and properties weren't being stored in database.<\/div><\/div>
Updated<\/div>
- Phase map is now not applied to installation meters.<\/div><\/div>
Improved<\/div>
- Changed access point interface to change apn, with manual mode or mobile operator mode.<\/div><\/div><\/div><\/div><\/div>
3.1.8<\/div>
septembre 29, 2023<\/small><\/div><\/div>
Updated<\/div>
- Force WIFI and bluetooth GPIO pins for compute module 4 to work.<\/div><\/div><\/div><\/div><\/div>
3.1.7<\/div>
septembre 29, 2023<\/small><\/div><\/div>
Updated<\/div>
- Force 4g GPIO pins for compute module 4 to work.<\/div><\/div><\/div><\/div><\/div>
3.1.6<\/div>
septembre 28, 2023<\/small><\/div><\/div>
Improved<\/div>
- When we detect that measurers aren't working, we send an unblock command in case there's a charge and the charger has lost power.<\/div><\/div>
Improved<\/div>
- Create section BASIC_UNREPORTED for properties that are used but we don't want to report.<\/div><\/div>
Added<\/div>
- Property log_level is now an unreported property.<\/div><\/div>
Fixed<\/div>
- When we don't receive petitions from chromium we now press enter and Ctrl+F5 if there's anything we need to accept.<\/div><\/div>
Improved<\/div>
- Locked value has persistance when measurers fail.<\/div><\/div><\/div><\/div><\/div>
3.1.5<\/div>
septembre 27, 2023<\/small><\/div><\/div>
Fixed<\/div>
- Mechanism so that when a network parameter has been changed, it waits for changes to take effect before rebooting.<\/div><\/div>
Fixed<\/div>
- Changing WIFI configuration with bluetooth now reboots the charge point.<\/div><\/div><\/div><\/div><\/div>
3.1.4<\/div>
septembre 26, 2023<\/small><\/div><\/div>
Improved<\/div>
- Fixed configuration file so that software works with compute module 3 and 4.<\/div><\/div>
Improved<\/div>
- Changed reboot logic. It will now reboot if there's a car connected but charge is not allowed.<\/div><\/div>
Fixed<\/div>
- Changed payments qr code.<\/div><\/div>
Fixed<\/div>
- We can change log level with property.<\/div><\/div>
Added<\/div>
- Fixed log file rotator.<\/div><\/div><\/div><\/div><\/div>
3.1.3<\/div>
septembre 18, 2023<\/small><\/div><\/div>
Fixed<\/div>
- Meter values fixed. We now send wh instead of kwh.<\/div><\/div>
Added<\/div>
- RemoteStartTransaction works regardless of LocalPreAuthorize value.<\/div><\/div><\/div><\/div><\/div>
3.1.2<\/div>
septembre 7, 2023<\/small><\/div><\/div>
Fixed<\/div>
- Fixed error where timezone wasn't set correctly so time appeared incorrectly.<\/div><\/div>
Added<\/div>
- Updated STM to version 1.2. It improves connector block.<\/div><\/div>
Improved<\/div>
- Fixed general network errors. Improved access point and wifi connectivity.<\/div><\/div>
Fixed<\/div>
- Fixed payment_max_mode timeout bug.<\/div><\/div>
Added<\/div>
- Pause is now reset when it goes back to state A.<\/div><\/div>
Added<\/div>
- Show measurer error as "Error 3" on connector. Behaviour is that connector is locked until it's fixed.<\/div><\/div>
Added<\/div>
- Set wire connected again.<\/div><\/div><\/div><\/div><\/div>
3.1.1<\/div>
septembre 4, 2023<\/small><\/div><\/div>
Improved<\/div>
- Change timezone automatically.<\/div><\/div>
Added<\/div>
- Fixed Carlo Gavazzi Measurer.<\/div><\/div>
Added<\/div>
- Fixed power, it was shown in W and is now in Kw.<\/div><\/div>
Removed<\/div>
- Fixed removal of grey notification update.<\/div><\/div>
Fixed<\/div>
- Added triphasic phoenix contact measurer.<\/div><\/div><\/div><\/div><\/div>
3.1.0<\/div>
septembre 1, 2023<\/small><\/div><\/div>
Added<\/div>
- Patch to remove grey notifications at startup.<\/div><\/div>
Added<\/div>
- Whenever there's an action that provokes rebooting, it will show on screen that it's going to reboot and the cause.<\/div><\/div>
Added<\/div>
- Screen orientation can now be set and depending on parameter.<\/div><\/div>
Improved<\/div>
- Measurer refactoring.<\/div><\/div>
Fixed<\/div>
- Limited number of messages we can send to iothub.<\/div><\/div>
Improved<\/div>
- Imei obtention improved.<\/div><\/div>
Added<\/div>
- Added error message 1 and 2.<\/div><\/div>
Improved<\/div>
- Initial version of bluetooth finished: Obtain properties change basic properties, program charge, reboot, add rfid and change wifi.<\/div><\/div>
Removed<\/div>
- Removed wire_connected event telemetry.<\/div><\/div>
Fixed<\/div>
- In OCPP, fixed sending of meter values. Now sending in wh and not in kwh.<\/div><\/div>
Fixed<\/div>
- Boot patch so that GPIO pin initialization takes less time.<\/div><\/div>
Added<\/div>
- Bluetooth patch so that bluetooth initialization takes less time.<\/div><\/div>
Added<\/div>
- Created patch system. System level changes will be applied with this system.<\/div><\/div>
Fixed<\/div>
- Monophasic measurer Eastron SDM220 implemented.<\/div><\/div>
Updated<\/div>
- RFID can now function with payments. If RFID is enabled with payments, registered cards will be able to start charges. If RFID is disabled with payments, no card will be able to start a charge.<\/div><\/div>
Fixed<\/div>
- Improved robustness on all direct methods.<\/div><\/div>
Fixed<\/div>
- Fixed bug where it didn't reconnect properly to iothub when it disconnected.<\/div><\/div>
Improved<\/div>
- Boot improvements. "Page not found" isn't shown anymore. Boot is faster. There's a gif indicating that system is starting.<\/div><\/div>
Fixed<\/div>
- Created direct method to put a QR code on the OCPP screen.<\/div><\/div>
Improved<\/div>
- Obsolete properties are now deleted automatically so that they aren't reported.<\/div><\/div><\/div><\/div><\/div>
3.0.9<\/div>
juillet 5, 2023<\/small><\/div><\/div>
Fixed<\/div>
- Fixed ocpp meter value Energy.Active.Import, when measurer is flipped.<\/div><\/div><\/div><\/div><\/div>
3.0.8<\/div>
juillet 4, 2023<\/small><\/div><\/div>
Fixed<\/div>
- Fixed local load balancing when one connector was charging. Now when one connector is charging, it will charge at the set intensity.<\/div><\/div>
Added<\/div>
- Wire connected is now a telemetry event instead of a reported property so that the server can use the timestamp.<\/div><\/div>
Updated<\/div>
- Fixed error where e-Charger couldn't obtain dns when connected with WIFI.<\/div><\/div><\/div><\/div><\/div>
3.0.7<\/div>
juin 28, 2023<\/small><\/div><\/div>
Fixed<\/div>
- Fixed ocpp Remote Start Transaction and Remote Stop Transaction.<\/div><\/div><\/div><\/div><\/div>
3.0.6<\/div>
juin 26, 2023<\/small><\/div><\/div>
Fixed<\/div>
- Fixed error that ocurred in ocpp where it didn't clear properly the idtag when finishing a transaction.<\/div><\/div><\/div><\/div><\/div>
3.0.5<\/div>
juin 22, 2023<\/small><\/div><\/div>
Updated<\/div>
- Changed access point ip from 192.168.44.1 to 192.168.4.1<\/div><\/div>
Fixed<\/div>
- Fixed websocket connection issue with nuitka compilation.<\/div><\/div>
Improved<\/div>
- Programmed charge now works with OCPP, Payments or RFID.<\/div><\/div>
Updated<\/div>
- We now report the charger's state instead of the requested vehicle state.<\/div><\/div>
Updated<\/div>
- Changed access point master password.<\/div><\/div><\/div><\/div><\/div>
3.0.4<\/div>
juin 19, 2023<\/small><\/div><\/div>
Improved<\/div>
- OCPP.<\/div><\/div>
Improved<\/div>
- Improved update logs.<\/div><\/div><\/div><\/div><\/div>
3.0.3<\/div>
juin 8, 2023<\/small><\/div><\/div>
Added<\/div>
- Moved Version from center to right side and added V. before the version number.<\/div><\/div><\/div><\/div><\/div>
3.0.2<\/div>
juin 7, 2023<\/small><\/div><\/div>
Improved<\/div>
- STM will now detect SPI bus communication errors and will automatically reset.<\/div><\/div><\/div><\/div><\/div>
3.0.1<\/div>
juin 5, 2023<\/small><\/div><\/div>
Improved<\/div>
- Screen is now monitored so that it refreshes in the case that no requests have been made after 15 seconds.<\/div><\/div>
Fixed<\/div>
- Fixed bug where connector stopped working properly when sending intensity 0.<\/div><\/div>
Improved<\/div>
- QA diagnostic is obtained through access point.<\/div><\/div>
Improved<\/div>
- Reduced access point available time to 10 minutes.<\/div><\/div>
Added<\/div>
- There's a master username and password for installers.<\/div><\/div>
Added<\/div>
- Screen now shows when RFID card is registered.<\/div><\/div>
Added<\/div>
- Top bar now shows version and if access point is accessible.<\/div><\/div>
Added<\/div>
- Access point interface now has, local load balancing, rfid card registering and log download.<\/div><\/div>
Added<\/div>
- Check that compute module and board have been created properly.<\/div><\/div><\/div><\/div><\/div>
3.0.0<\/div>
mai 4, 2023<\/small><\/div><\/div>

Pole Pro initial version<\/p>\n<\/div>

Added<\/div>
- Initial Version<\/div><\/div><\/div><\/div><\/div><\/div>\n<\/div><\/div>\n\n\n\n
\n

Denka<\/h2><\/div>\n\n\n
0.14.<\/div>
janvier 20, 2026<\/small><\/div><\/div>
Added<\/div>
Affichage de l\u2019\u00e9tat de charge dans le panneau installateur.<\/div><\/div>
Improved<\/div>
Recharge intelligente : curseur de puissance dans le panneau installateur.<\/div><\/div>
Improved<\/div>
Am\u00e9liorations g\u00e9n\u00e9rales de la stabilit\u00e9 et de la fiabilit\u00e9 du syst\u00e8me.<\/div><\/div>
Improved<\/div>
Am\u00e9liorations globales du fonctionnement et de la stabilit\u00e9.<\/div><\/div>
Fixed<\/div>
Corrections du comportement de la recharge intelligente OCPP.<\/div><\/div>
Fixed<\/div>
Correction de probl\u00e8mes li\u00e9s \u00e0 la gestion et \u00e0 la r\u00e9cup\u00e9ration des alarmes syst\u00e8me.<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
0.14.1<\/div>
d\u00e9cembre 18, 2025<\/small><\/div><\/div>
Added<\/div>
Indicateur de d\u00e9passement du Target SoC.<\/div><\/div>
Added<\/div>
Arr\u00eat de la charge \u00e0 un SoC sp\u00e9cifique.<\/div><\/div>
Added<\/div>
Rapport sur l\u2019\u00e9tat du bouton d\u2019urgence.<\/div><\/div>
Added<\/div>
\u00c9l\u00e9ment slider dans le serveur web.<\/div><\/div>
Added<\/div>
Rapport du SoC du v\u00e9hicule et protocole vers le backend.<\/div><\/div>
Added<\/div>
La m\u00e9thode directe currentcharge renvoie d\u00e9sormais le temps restant pour le SoC bulk et complet.<\/div><\/div>
Added<\/div>
M\u00e9thode directe pour red\u00e9marrer le service autossh.<\/div><\/div>
Added<\/div>
Configuration du mode IP (publique\/priv\u00e9e) pour la connexion 4G.<\/div><\/div>
Improved<\/div>
Chargement intelligent OCPP.<\/div><\/div>
Improved<\/div>
Am\u00e9liorations des performances.<\/div><\/div>
Improved<\/div>
D\u00e9marrage du module Wi-Fi.<\/div><\/div>
Improved<\/div>
Migration du serveur HTTP.<\/div><\/div>
Fixed<\/div>
Correction des erreurs de configuration au d\u00e9marrage.<\/div><\/div>
Fixed<\/div>
Correction des erreurs du chargement intelligent OCPP.<\/div><\/div>
Fixed<\/div>
Correction des erreurs du serveur web et de la communication avec le mat\u00e9riel.<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
0.13.4<\/div>
octobre 20, 2025<\/small><\/div><\/div>
Added<\/div>
Option pour d\u00e9sactiver le Wi-Fi dans le panneau d\u2019installation.<\/div><\/div>
Improved<\/div>
Am\u00e9lioration des performances de transmission des param\u00e8tres DC.<\/div><\/div>
Fixed<\/div>
R\u00e9solution du blocage SPI.<\/div><\/div>
Fixed<\/div>
Bug dans TimerHandler avec n_connectors.<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div>
0.11.3<\/div>
octobre 7, 2025<\/small><\/div><\/div>
Added<\/div>
Rapport des tags.<\/div><\/div>
Added<\/div>
Int\u00e9gration des modifications des propri\u00e9t\u00e9s report\u00e9es.<\/div><\/div>
Added<\/div>
Ajustement de la calibration RFID depuis le panneau d\u2019installation.<\/div><\/div>
Added<\/div>
Int\u00e9gration de la propri\u00e9t\u00e9 observ\u00e9e de la biblioth\u00e8que partag\u00e9e.<\/div><\/div>
Added<\/div>
Arr\u00eat de la charge \u00e0 un SoC sp\u00e9cifique.<\/div><\/div>
Added<\/div>
Liste blanche de charge bas\u00e9e sur MAC.<\/div><\/div>
Fixed<\/div>
Bug dans TimerHandler avec n_connectors.<\/div><\/div>
Fixed<\/div>
Hotfix pour l\u2019augmentation des messages envoy\u00e9s.<\/div><\/div><\/div>
More details about this release<\/a><\/div><\/div><\/div><\/div>\n<\/div><\/div>\n\n\n\n
\n

Screen<\/h2><\/div>\n\n\n
2.20<\/div>
janvier 23, 2024<\/small><\/div><\/div>
Fixed<\/div>
- Fixed rfid bug in ocpp.<\/div><\/div><\/div><\/div><\/div>
2.19<\/div>
janvier 19, 2024<\/small><\/div><\/div>
Fixed<\/div>
- Fixed rfid card issue in stop transactions.<\/div><\/div><\/div><\/div><\/div>
2.18<\/div>
octobre 25, 2023<\/small><\/div><\/div>
Fixed<\/div>
- Fixed OCPP error where transaction wasn't started when states passed from C to B to C.<\/div><\/div><\/div><\/div><\/div>
2.17<\/div>
septembre 29, 2023<\/small><\/div><\/div>
Fixed<\/div>
- CB Master: Improved robustness of rfid charge track so that if one connector is fully charged and a different car wants to charge in the other connector it can now charge.<\/div><\/div><\/div><\/div><\/div>
2.16<\/div>
septembre 21, 2023<\/small><\/div><\/div>
Fixed<\/div>
- CB Master: Fixed bug that wouldn't allow two connectors to charge with payment + RFID.<\/div><\/div><\/div><\/div><\/div>
2.15<\/div>
ao\u00fbt 18, 2023<\/small><\/div><\/div>
Added<\/div>
- CB Master\/CB N: Rfid cards can start a charge in payment mode if rfid is enabled.<\/div><\/div><\/div><\/div><\/div>
2.14<\/div>
ao\u00fbt 14, 2023<\/small><\/div><\/div>
Fixed<\/div>
- CB Master: We check if measurer is flipped by connector instead of globally.<\/div><\/div><\/div><\/div><\/div>
2.13<\/div>
juillet 31, 2023<\/small><\/div><\/div>
Fixed<\/div>
- CB Master: We check if measurer is flipped while configuring meter values so that they are sent correctly.<\/div><\/div><\/div><\/div><\/div>
2.12<\/div>
juillet 25, 2023<\/small><\/div><\/div>
Fixed<\/div>
- CB N: Fixed cloud iot problem.<\/div><\/div>
Fixed<\/div>
- CB Master: Configuration file is restored correctly in the case it's lost. This provoked the page not found error.<\/div><\/div>
Fixed<\/div>
- CB Master: Fixed bug where a connector couldn't start a charge when there's a car on the other connector with state B.<\/div><\/div>
Added<\/div>
- CB Master: Implemented callable meter values.<\/div><\/div><\/div><\/div><\/div>
2.11<\/div>
mars 9, 2023<\/small><\/div><\/div>
Fixed<\/div>
- CB Master: Meter power bug fix.<\/div><\/div><\/div><\/div><\/div>
2.10<\/div>
f\u00e9vrier 23, 2023<\/small><\/div><\/div>
Improved<\/div>
- CB N: General payment improvements.<\/div><\/div>
Added<\/div>
- CB N: We now report property wire_connected so that in the payment method the parking can be charged.<\/div><\/div>
Improved<\/div>
- CB N: In payment method, when you move from status c to b, it does not allow you to reload again until you start a new transaction.<\/div><\/div>
Added<\/div>
- CB N: Car state management D and E.<\/div><\/div>
Improved<\/div>
- CB N: Improved restart logic when any OCPP configuration is changed.<\/div><\/div>
Fixed<\/div>
- CB Master: Fixed payment bug that sent the upload permission to the wrong connector.<\/div><\/div>
Fixed<\/div>
- CB Master: Fixed bug that when two cars were connected and the B connector was in B status, when the card was swiped, the B was set to charge when the A should be set.<\/div><\/div>
Improved<\/div>
- CB Master: General meter improvements.<\/div><\/div>
Fixed<\/div>
- CB Master: Total energy bug arrangement from version using imported and exported energy.<\/div><\/div>
Improved<\/div>
- Pole: Filter to reduce number of logs.<\/div><\/div><\/div><\/div><\/div>
2.9<\/div>
d\u00e9cembre 16, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB Master: Improved OCPP smart charging balancing logic.<\/div><\/div>
Improved<\/div>
- CB Master: Meter restructuring.<\/div><\/div>
Improved<\/div>
- OCPP: General improvements in Smart Charging and Tx Profile implemented.<\/div><\/div>
Improved<\/div>
- OCPP: Changes due to restructuring of the meter.<\/div><\/div>
Improved<\/div>
- OCPP: Restructuring of smart charging. Obtain composite timetable with several profiles.<\/div><\/div><\/div><\/div><\/div>
2.8<\/div>
novembre 14, 2022<\/small><\/div><\/div>
Added<\/div>
- CB N: Added diagnostic method.<\/div><\/div>
Improved<\/div>
- CB Master: Increased RFID SPI communication speed and lowered RFID gain if noise is detected.<\/div><\/div>
Added<\/div>
- CB Master: Integrated SACI meter and changes so that the serial configuration per connector is not linked.<\/div><\/div>
Improved<\/div>
- CB Master: Code refactoring<\/div><\/div><\/div><\/div><\/div>
2.7<\/div>
octobre 18, 2022<\/small><\/div><\/div>
Fixed<\/div>
- CB Master: Convert to positive the negative values read by Phoenix Contact measurer.<\/div><\/div>
Added<\/div>
- CB Master: We delete BrowserMetrics from chromium that it sometimes fills up and eats up all the memory.<\/div><\/div>
Improved<\/div>
- CB Master: Refactored serial and made some changes that improve flexibility. We can now have one connector with one type of measurer and the other connector with a different type of measurer.<\/div><\/div>
Fixed<\/div>
- CB Master: Adjusted the precision of Phoenix Contact monophasic measurers.<\/div><\/div>
Fixed<\/div>
- CB N: Fixed bug provoked by changing local load balancing from v2c service.<\/div><\/div>
Fixed<\/div>
- OCPP: Change availability of Persistant Data handler is now async so that we can call it without blocking the execution of the ServerController.<\/div><\/div>
Added<\/div>
- OCPP: Starting point for get composite schedule done.<\/div><\/div>
Added<\/div>
- OCPP: Relative profiles are handled but only for Smart Charge profiles where connector id is bigger than 0.<\/div><\/div>
Fixed<\/div>
- OCPP: Fixed clear charging profiles.<\/div><\/div>
Added<\/div>
- OCPP: Smart Charging Tx Profiles are now accepted.<\/div><\/div>
Added<\/div>
- OCPP: In websocket connection, added "compression=None" since without it it doesn't work on latest Steve version.<\/div><\/div>
Improved<\/div>
- OCPP: Added next time check mechanism for Smart Charging so we check the next time any limit changes instead of every 30 seconds.<\/div><\/div>
Improved<\/div>
- OCPP: General Smart Charge improvements.<\/div><\/div>
Fixed<\/div>
- OCPP: We handle decimal numbers on the Smart Charge profile's limit.<\/div><\/div><\/div><\/div><\/div>
2.6<\/div>
octobre 4, 2022<\/small><\/div><\/div>
Fixed<\/div>
- OCPP, CB N and CB Master: Fixed bug when locked was modified and ocpp was activated but chargepoint isn't connected to any central system.<\/div><\/div>
Fixed<\/div>
- CB Master: Fixed bug when OCPP charge is started where if connector 1 was charging, connector 0 couldn't start a charge.<\/div><\/div>
Added<\/div>
- CB Master: Function to receive Smart Charge current and OCPP balancing.<\/div><\/div>
Fixed<\/div>
- CB Master: Prevent crash in the case that .versions folder doesn't exist.<\/div><\/div>
Fixed<\/div>
- CB Master: Register cards are now added to card cache.<\/div><\/div>
Added<\/div>
- CB N: Changes due to Smart Charging<\/div><\/div>
Added<\/div>
- OCPP: Smart Charging starting point fininshed.<\/div><\/div>
Added<\/div>
- OCPP: Smart Charging configuration keys are handled.<\/div><\/div>
Added<\/div>
- OCPP: Smart Charging profiles can be added and will be validated and can also be deleted.<\/div><\/div><\/div><\/div><\/div>
2.5<\/div>
septembre 23, 2022<\/small><\/div><\/div>

OCPP library version upgraded from 0.12 to 0.15.<\/p>\n<\/div>

Improved<\/div>
- CB Master: Improvements in update process.<\/div><\/div>
Improved<\/div>
- CB Master: Changes so that screen indicates when a non registered RFID card is passed.<\/div><\/div>
Improved<\/div>
- CB N: Improvements in update process.<\/div><\/div>
Improved<\/div>
- OCPP: GetConfigurationKeys now returns unknown keys and we handle SupportedFileTransferProtocols key.<\/div><\/div>
Added<\/div>
- Pole: Screen now shows when user passes a non registered RFID card.<\/div><\/div>
Improved<\/div>
- Pole: Romanian identifier moved to position 6 to maintain order language with Trydan.<\/div><\/div><\/div><\/div><\/div>
2.4<\/div>
septembre 20, 2022<\/small><\/div><\/div>
Removed<\/div>
- CB Master: We don't send wifi_info in report anymore and we have removed functions related to wifi_info.<\/div><\/div>
Improved<\/div>
- CB Master: RFID reader improvements. The charger reads continuously instead of intermittently, reduced read errors and antenna gain is now dynamic.<\/div><\/div>
Improved<\/div>
- CB Master: We store RFID cards in cache.<\/div><\/div>
Improved<\/div>
- CB N: RFID reader improvements. Case where two connectors are plugged in and a card is passed.<\/div><\/div>
Removed<\/div>
- CB N: We don't send wifi_info in report anymore.<\/div><\/div>
Improved<\/div>
- CB N: New communication method so that CB master can obtain RFID cards.<\/div><\/div><\/div><\/div><\/div>
2.3<\/div>
septembre 13, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB Master: Improvement in connect\/disconnect logic. Disconnection is less rigid and we increased network check from 5 seconds to 15 seconds.<\/div><\/div>
Fixed<\/div>
- CB Master: CWe fix error provoked by blocking\/unblocking when charger has OCPP activated and isn't connected to central system.<\/div><\/div>
Improved<\/div>
- CB Master: Increased RFID reader antenna gain.<\/div><\/div>
Added<\/div>
- CB Master: Changes in access point page to configure static IP.<\/div><\/div>
Improved<\/div>
- CB N: When charger reconnects, it will only send report if a property has changed.<\/div><\/div>
Improved<\/div>
- CB N: Properties are now only reported when they have changed from previous value.<\/div><\/div>
Fixed<\/div>
- CB N: We fix error provoked by blocking\/unblocking when charger has OCPP activated and isn't connected to central system.<\/div><\/div>
Added<\/div>
- CB N: Static IP configuration through access point.<\/div><\/div>
Fixed<\/div>
- OCPP: We fix error provoked by blocking\/unblocking when charger has OCPP activated and isn't connected to central system.<\/div><\/div><\/div><\/div><\/div>
2.2<\/div>
septembre 7, 2022<\/small><\/div><\/div>
Fixed<\/div>
- CB Master: Fixed energy by hour bug.<\/div><\/div>
Improved<\/div>
- CB Master: Safeguard so that it doesn't fail when there's a missing network card and we try to obtain data usage.<\/div><\/div>
Updated<\/div>
- CB Master: Removed range validation from measurer for Carlo Gavazzi and Phoenix Contact measurers.<\/div><\/div>
Improved<\/div>
- OCPP: Removed range validation from measurer.<\/div><\/div>
Added<\/div>
- Pole: Added Romanian language.<\/div><\/div><\/div><\/div><\/div>
2.1<\/div>
septembre 6, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB N: We only change repository hash if it has changed.<\/div><\/div>
Improved<\/div>
- CB N: We show in log if i2c reconnects.<\/div><\/div><\/div><\/div><\/div>
2.0<\/div>
ao\u00fbt 29, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB Master: Adjustment in measurer so that it can handle int32 represented as uint.<\/div><\/div>
Added<\/div>
- CB Master: Changes to reduce calls to has_internet_connection to consume less data.<\/div><\/div>
Added<\/div>
- CB Master: Chargebox Cache now stores state of connectivity with V2C service to show it on the screen.<\/div><\/div>
Improved<\/div>
- CB N: Log improvements to not show get_has_internet_connection y and reduce error messages generated when i2c is not working.<\/div><\/div>
Improved<\/div>
- CB N: Changes to reduce calls to has_internet_connection to consume less data.<\/div><\/div>
Added<\/div>
- CB N: Chargebox Cache now stores state of connectivity with V2C service.<\/div><\/div>
Fixed<\/div>
- CB N: Seconds of timeout now return 0 instead of None if not set.<\/div><\/div>
Improved<\/div>
- OCPP: We log exception names since sometimes exception errors return empty string.<\/div><\/div>
Improved<\/div>
- OCPP: We capture error if there's an error when sending heartbeat.<\/div><\/div>
Improved<\/div>
- OCPP: We change client controller so that it's the same as CB N and CB Master.<\/div><\/div>
Added<\/div>
- Pole: The screen now shows a cloud icon to indicate connectivity to our cloud.<\/div><\/div><\/div><\/div><\/div>
1.9.1<\/div>
ao\u00fbt 25, 2022<\/small><\/div><\/div>
Fixed<\/div>
- CB Master: Fixed error where RFID stops charge while the other connector is enabled.<\/div><\/div>
Fixed<\/div>
- CB Master: Fixed error where RFID card is passed and both connectors have a car plugged in.<\/div><\/div>
Added<\/div>
- CB Master: Network usage will be shown in log when a reboot is performed.<\/div><\/div>
Improved<\/div>
- CB Master: Master now sends the balanced intensity when it changes.<\/div><\/div>
Improved<\/div>
- CB N: Changed order of what happens when configuration is changed. We first update the value, then we report the changes to Azure and finally we set the cache.<\/div><\/div>
Fixed<\/div>
- CB N: Fixed bug where changing local load balancing set both connector intensities to 16.<\/div><\/div>
Improved<\/div>
- CB N: CB Master now sends balanced intensity instead of CB N probing for change.<\/div><\/div><\/div><\/div><\/div>
1.9<\/div>
ao\u00fbt 22, 2022<\/small><\/div><\/div>
Added<\/div>
- CB Master: Network usage is now monitored.<\/div><\/div>
Improved<\/div>
- CB Master: Change in log system to not show repeated logs.<\/div><\/div>
Improved<\/div>
- CB Master: Shared properties are now set in the other connector if they are different on startup.<\/div><\/div>
Improved<\/div>
- CB Master: Completely decoupled OCPP from CB N and get_ocpp_config function fixed.<\/div><\/div>
Improved<\/div>
- CB Master: Network state is now sent when changed instead of being probed every 30 seconds.<\/div><\/div>
Improved<\/div>
- CB N: General improvements of communication between modules and cache.<\/div><\/div>
Improved<\/div>
- CB N: Improved stability related with missing configuration.<\/div><\/div>
Improved<\/div>
- CB N: Change in log system to not show repeated logs.<\/div><\/div>
Improved<\/div>
- CB N: Fixed problem where Chargebox loop would destroy RFID state.<\/div><\/div>
Improved<\/div>
- CB N: Fixed OCPP ConnectionTimeout.<\/div><\/div>
Improved<\/div>
- CB N: Completely decoupled OCPP from CB N<\/div><\/div>
Improved<\/div>
- CB N: Network state is now sent when changed instead of being probed every 30 seconds.<\/div><\/div>
Improved<\/div>
- CB N: We only change repository hash if it's different than the current one.<\/div><\/div>
Improved<\/div>
- CB N: Updating checks if charger is updated or not and only changes version after it has been updated.<\/div><\/div>
Improved<\/div>
- CB N: General improvements of communication between modules.<\/div><\/div>
Improved<\/div>
- OCPP: Improved Client Controller traceability.<\/div><\/div><\/div><\/div><\/div>
1.8<\/div>
ao\u00fbt 9, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB Master: Created singletons are now thread safe.<\/div><\/div>
Improved<\/div>
- CB Master: Created Cache to decrease the number of requests and communication between modules.<\/div><\/div>
Improved<\/div>
- CB Master: Fixed network reset problem.<\/div><\/div>
Improved<\/div>
- CB Master: Changes so that Pole can receive all the information it needs in one call.<\/div><\/div>
Improved<\/div>
- CB Master: Changes dues to how the measures are now sent.<\/div><\/div>
Improved<\/div>
- CB Master: General access point improvements.<\/div><\/div>
Improved<\/div>
- CB Master: Improvements due to changes in module communication.<\/div><\/div>
Improved<\/div>
- CB N: Created singletons are now thread safe.<\/div><\/div>
Improved<\/div>
- CB N: Server Controller is now executed sooner due to being fundamental in correct functioning.<\/div><\/div>
Improved<\/div>
- CB N: Changes to take into account CB Master's cache<\/div><\/div>
Improved<\/div>
- CB N: Changed way we obtain measures to perform less requests with Client Controller.<\/div><\/div>
Improved<\/div>
- CB N: Improvements due to changes in module communication.<\/div><\/div>
Improved<\/div>
- OCPP: Created singletons are now thread safe.<\/div><\/div>
Improved<\/div>
- OCPP: Completely decoupled from CB N and now only communicates with CB Master.<\/div><\/div>
Improved<\/div>
- OCPP: Simplified communication between modules.<\/div><\/div>
Improved<\/div>
- OCPP: Improvements due to changes in module communication.<\/div><\/div>
Improved<\/div>
- Pole: Created singletons are now thread safe.<\/div><\/div>
Improved<\/div>
- Pole: Completely decoupled CB N and we obtain all information needed in one call to CB Master.<\/div><\/div>
Improved<\/div>
- Pole: Improvements due to changes in module communication.<\/div><\/div><\/div><\/div><\/div>
1.7<\/div>
juillet 20, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB Master: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.<\/div><\/div>
Improved<\/div>
- CB Master: The charger now limits the number of messages that appear in the case that there's a range validation fail of a measure.<\/div><\/div>
Improved<\/div>
- CB N: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.<\/div><\/div>
Improved<\/div>
- CB N: Restart Server Controller mechanism.<\/div><\/div>
Fixed<\/div>
- OCPP: If there's an error handling a request, we won't add it to the offline queue.<\/div><\/div>
Improved<\/div>
- OCPP: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.<\/div><\/div>
Fixed<\/div>
- OCPP: Include thread and sys libraries.<\/div><\/div>
Improved<\/div>
- OCPP: Restart async Server Controller mechanism.<\/div><\/div>
Improved<\/div>
- Pole: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.<\/div><\/div><\/div><\/div><\/div>
1.6.0<\/div>
juillet 13, 2022<\/small><\/div><\/div>
Improved<\/div>
- OCPP: When rebooting, we check module communication server.<\/div><\/div>
Improved<\/div>
- CB N: When rebooting, we check module communication server.<\/div><\/div>
Improved<\/div>
- CB N: Decoupled concept of connector id and measurer address.<\/div><\/div>
Improved<\/div>
- CB Master: When rebooting, we check module communication server.<\/div><\/div>
Improved<\/div>
- CB Master: Decoupled concept of connector id and measurer address.<\/div><\/div>
Improved<\/div>
- CB Master: Fixed error in Phoenix Contact measurer.<\/div><\/div>
Improved<\/div>
- Pole: ZMQ integrated to improve communication.<\/div><\/div><\/div><\/div><\/div>
1.5.6<\/div>
juillet 1, 2022<\/small><\/div><\/div>
Improved<\/div>
- Pole: Improvement to let the user know when to connect the vehicle.<\/div><\/div>
Improved<\/div>
- Pole: Screen now reflects if charger has only one connector.<\/div><\/div>
Improved<\/div>
- CB Master: Changed SSID format so that it's the same as Trydan's format.<\/div><\/div>
Added<\/div>
- CB Master: Phoenix Contact measurer is now integrated.<\/div><\/div><\/div><\/div><\/div>
1.5.5<\/div>
juin 22, 2022<\/small><\/div><\/div>
Fixed<\/div>
- OCPP: Fixed problem with repeated logs.<\/div><\/div>
Updated<\/div>
- OCPP: AuthorizeRemoteTxRequests is now a read and write configuration key.<\/div><\/div>
Improved<\/div>
- OCPP: Fixed case when central station id is an integer.<\/div><\/div>
Improved<\/div>
- OCPP: Added measurer range validation.<\/div><\/div>
Fixed<\/div>
- CB Master: Fixed problem with repeated logs.<\/div><\/div>
Improved<\/div>
- CB Master: Added measurer range validation.<\/div><\/div>
Fixed<\/div>
- CB N: Fixed problem with repeated logs.<\/div><\/div><\/div><\/div><\/div>
1.5.4<\/div>
juin 7, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB Master: Access point can now change configuration of second connector if it has it.<\/div><\/div>
Improved<\/div>
- CB N: Handled special case of change intensity.<\/div><\/div><\/div><\/div><\/div>
1.5.3<\/div>
juin 1, 2022<\/small><\/div><\/div>
Added<\/div>
- CB N: OCPP Status Notification transitions fixed when there's an unavailable connector.<\/div><\/div>
Improved<\/div>
- CB N: If OCPP is on, we disable payment mode.<\/div><\/div>
Added<\/div>
- CB Master: Access point logic fininshed.<\/div><\/div>
Added<\/div>
- OCPP: Data validation when configuration is changed.<\/div><\/div>
Added<\/div>
- OCPP: Charger can now handle multiple transactions offline.<\/div><\/div><\/div><\/div><\/div>
1.5.2<\/div>
mai 20, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB Master: Increased time before rebooting to improve stability.<\/div><\/div>
Improved<\/div>
- OCPP: Reset function improved. Corresponding Status Notification is sent.<\/div><\/div><\/div><\/div><\/div>
1.5.1<\/div>
mai 17, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB N: General stability improvements.<\/div><\/div>
Improved<\/div>
- CB N: Changed payment method approach.<\/div><\/div>
Improved<\/div>
- CB Master: Changed payment method approach.<\/div><\/div>
Improved<\/div>
- CB Master: Improved robustness in the case the access point software is not installed.<\/div><\/div>
Added<\/div>
- Pole: We show device id on the screen.<\/div><\/div>
Improved<\/div>
- Pole: Improvements due to payment method.<\/div><\/div><\/div><\/div><\/div>
1.5.0<\/div>
mai 13, 2022<\/small><\/div><\/div>
Added<\/div>
- OCPP: Data transfer method to obtain logs.<\/div><\/div>
Added<\/div>
- OCPP: Change availability validates connector.<\/div><\/div>
Improved<\/div>
- CB Master: Changed compressed file formats from gzip to gz<\/div><\/div>
Improved<\/div>
- CB Master: Force backup when restarting.<\/div><\/div>
Added<\/div>
- CB Master: Finished Access point.<\/div><\/div><\/div><\/div><\/div>
1.4.4<\/div>
mai 9, 2022<\/small><\/div><\/div>
Added<\/div>
- CB N: Added set internal config function.<\/div><\/div>
Added<\/div>
- CB N: Allow to change intensity, when i2c is failing.<\/div><\/div>
Fixed<\/div>
- CB Master: Fixed OCPP measurer error that ocurred when all selected measures in Meter Values returned 0.<\/div><\/div>
Added<\/div>
- CB Master: Implemented most of the access point server functionalities.<\/div><\/div><\/div><\/div><\/div>
1.4.3<\/div>
mai 6, 2022<\/small><\/div><\/div>
Added<\/div>
- CB Master: Initial version of the access point server.<\/div><\/div><\/div><\/div><\/div>
1.4.2<\/div>
mai 4, 2022<\/small><\/div><\/div>
Fixed<\/div>
- CB Master: If payment mode is active, charger won't allow to charge with RFID card.<\/div><\/div>
Improved<\/div>
- CB Master: Changes to improve Pole software.<\/div><\/div>
Improved<\/div>
- CB N: Changes to improve Pole software.<\/div><\/div>
Improved<\/div>
- Pole: Changes to simplify view logic.<\/div><\/div>
Fixed<\/div>
- Pole: Removed sourceMappingUrl to prevent 404 error when there's no internet.<\/div><\/div><\/div><\/div><\/div>
1.4.1<\/div>
avril 28, 2022<\/small><\/div><\/div>
Fixed<\/div>
- CB N: Payment mode changed since payload format for server has changed.<\/div><\/div><\/div><\/div><\/div>
1.4.0<\/div>
avril 26, 2022<\/small><\/div><\/div>
Added<\/div>
- Pole: Changes in screen software that reflects payment mode, blocking connectors and OCPP.<\/div><\/div><\/div><\/div><\/div>
1.3.24<\/div>
avril 21, 2022<\/small><\/div><\/div>
Fixed<\/div>
OCPP: Fixed Unlock and Reset bug.<\/div><\/div>
Fixed<\/div>
OCPP: Charger won't send Authorize if passed RFID card is already used in a transaction.<\/div><\/div><\/div><\/div><\/div>
1.3.23<\/div>
avril 19, 2022<\/small><\/div><\/div>
Improved<\/div>
OCPP: We store RFID cards in lower caps to improve robustness.<\/div><\/div><\/div><\/div><\/div>
1.3.22<\/div>
avril 13, 2022<\/small><\/div><\/div>
Improved<\/div>
- OCPP: Improved robustness of RFID cards stored in the Local Authorization list.<\/div><\/div>
Added<\/div>
- OCPP: Authorization list works when there's no conection to the central system.<\/div><\/div><\/div><\/div><\/div>
1.3.21<\/div>
avril 11, 2022<\/small><\/div><\/div>
Added<\/div>
- OCPP: We handle key AllowOfflineTxForUnknownId.<\/div><\/div>
Improved<\/div>
- OCPP: Improved Local Authorization logic.<\/div><\/div><\/div><\/div><\/div>
1.3.20<\/div>
avril 7, 2022<\/small><\/div><\/div>
Fixed<\/div>
- OCPP: Fixed bugs from first integration test with EVIO.<\/div><\/div>
Fixed<\/div>
- CB Master: Fixed wifilist sending format.<\/div><\/div><\/div><\/div><\/div>
1.3.19<\/div>
avril 6, 2022<\/small><\/div><\/div>
Added<\/div>
- CB Master: We report wifi_info and wifilist by direct method or bluetooth.<\/div><\/div>
Added<\/div>
- CB N: We report information regarding wifi_info. Direct method to ask for the SSIDs the raspberry pi detects.<\/div><\/div><\/div><\/div><\/div>
1.3.18<\/div>
avril 5, 2022<\/small><\/div><\/div>
Improved<\/div>
- OCPP: Improved authorization cache handler.<\/div><\/div><\/div><\/div><\/div>
1.3.17<\/div>
avril 4, 2022<\/small><\/div><\/div>
Improved<\/div>
- OCPP: Improved request queue when there is no conection to central system.<\/div><\/div>
Improved<\/div>
- OCPP: Improved handling of measurer values.<\/div><\/div><\/div><\/div><\/div>
1.3.16<\/div>
avril 1, 2022<\/small><\/div><\/div>
Added<\/div>
- OCPP: Unlock connector implemented.<\/div><\/div>
Improved<\/div>
- OCPP: Improved handling of configuration keys.<\/div><\/div><\/div><\/div><\/div>
1.3.15<\/div>
mars 31, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB N: When the charger is initialized payment method will be off by default.<\/div><\/div>
Updated<\/div>
- CB N: Payment mode with duration and timers.<\/div><\/div><\/div><\/div><\/div>
1.3.14<\/div>
mars 30, 2022<\/small><\/div><\/div>
Added<\/div>
- CB Master: Function to obtain CPU temperature. It's a possible OCPP Meter Value.<\/div><\/div>
Improved<\/div>
- OCPP: Improved MeterValues handler.<\/div><\/div><\/div><\/div><\/div>
1.3.13<\/div>
mars 28, 2022<\/small><\/div><\/div>
Added<\/div>
- OCPP: Finished Local Authorization List profile.<\/div><\/div><\/div><\/div><\/div>
1.3.12<\/div>
mars 25, 2022<\/small><\/div><\/div>
Improved<\/div>
- OCPP: Log Improvements.<\/div><\/div><\/div><\/div><\/div>
1.3.11<\/div>
mars 24, 2022<\/small><\/div><\/div>
Fixed<\/div>
- OCPP: Fixed bug that wouldn't send Authorize Request when passing the RFID card.<\/div><\/div><\/div><\/div><\/div>
1.3.10<\/div>
mars 23, 2022<\/small><\/div><\/div>
Added<\/div>
- OCPP: Offline queue implemented for Start Transaction.<\/div><\/div>
Added<\/div>
- OCPP: Basic implementation of OCPP profiles: FirmwareManagement, LocalAuthListManagement, Reservation and SmartCharging.<\/div><\/div><\/div><\/div><\/div>
1.3.9<\/div>
mars 18, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB Master: Fixed RFID card reading with Wiegand reader for cards that have a 0 on the left side. Example of cards that failed: 32:0a:2c:23, 41:00:32:12.<\/div><\/div><\/div><\/div><\/div>
1.3.8<\/div>
mars 16, 2022<\/small><\/div><\/div>
Updated<\/div>
- OCPP: Availability isn't managed by OCPP anymore. It is handled exclusively by property locked.<\/div><\/div>
Improved<\/div>
- OCPP: Boot Notification now send the charger model correctly.<\/div><\/div><\/div><\/div><\/div>
1.3.7<\/div>
mars 15, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB N: If charger is blocked, led blinks won't be sent.<\/div><\/div><\/div><\/div><\/div>
1.3.6<\/div>
mars 15, 2022<\/small><\/div><\/div>
Added<\/div>
- CB N: Payment Mode finished with start and stop.<\/div><\/div><\/div><\/div><\/div>
1.3.5<\/div>
mars 14, 2022<\/small><\/div><\/div>
Improved<\/div>
- OCPP: Clear Cache can only be performed when all connectors are in the OCPP state Available.<\/div><\/div><\/div><\/div><\/div>
1.3.4<\/div>
mars 14, 2022<\/small><\/div><\/div>
Improved<\/div>
- CB N: When property locked is changed, OCPP availability is also changed.<\/div><\/div>
Improved<\/div>
- OCPP: Changes so that availability can be changed from CB N.<\/div><\/div><\/div><\/div><\/div>
1.3.3<\/div>
mars 10, 2022<\/small><\/div><\/div>
Added<\/div>
- CB N: If OCPP is active, it reports Status Notification with its corresponding state.<\/div><\/div>
Improved<\/div>
- CB Master: OCPP module can now ask for Status Notification.<\/div><\/div>
Updated<\/div>
- OCPP: The charger the different possible OCPP states in the Status Notification.<\/div><\/div><\/div><\/div><\/div>
1.3.2<\/div>
mars 4, 2022<\/small><\/div><\/div>
Improved<\/div>
- OCPP: We can now set configuration parameters for safeguard.<\/div><\/div><\/div><\/div><\/div>
1.3.1<\/div>
mars 4, 2022<\/small><\/div><\/div>
Improved<\/div>
- OCPP: Change availability is now completely functional. It changes to inoperative during a charge and availability changes the locked value.<\/div><\/div><\/div><\/div><\/div>
1.3.0<\/div>
mars 3, 2022<\/small><\/div><\/div>
Fixed<\/div>
- OCPP: Changed way we obtain measurer data for OCPP.<\/div><\/div><\/div><\/div><\/div>
1.2.0<\/div>
mars 2, 2022<\/small><\/div><\/div>
Fixed<\/div>
- OCPP: Temporary fix for Place to plug since OCPP library can't handle unknown keys.<\/div><\/div><\/div><\/div><\/div>
1.1.0<\/div>
mars 1, 2022<\/small><\/div><\/div>
Fixed<\/div>
- OCPP: Fixed _available_connectors error.<\/div><\/div><\/div><\/div><\/div>
1.0.0<\/div>
mars 1, 2022<\/small><\/div><\/div>

Initial Version<\/p>\n<\/div>

Added<\/div>
- OCPP.<\/div><\/div>
Added<\/div>
- Screen.<\/div><\/div>
Added<\/div>
- Pole.<\/div><\/div>
Added<\/div>
- CB Master.<\/div><\/div>
Added<\/div>
- CB N.<\/div><\/div><\/div><\/div><\/div><\/div>\n<\/div><\/div>\n\n\n\n
\n

V2C Cloud Mobile<\/h2><\/div>\n\n\n
2.2.3<\/div>
novembre 13, 2023<\/small><\/div><\/div>
Added<\/div>
- Add, edit and delete RFID cards via Bluetooth in Pole Pro.<\/div><\/div>
Improved<\/div>
- Faster loading of the configuration while offline.<\/div><\/div>
Updated<\/div>
- Change from KW to W in battery discharge.<\/div><\/div>
Fixed<\/div>
- Fixed bug when refreshing without having chargers.<\/div><\/div>
Updated<\/div>
- Changing 'Dynamic control configuration' to 'Load profiles'.<\/div><\/div>
Added<\/div>
- Share charger available in 'User Management'.<\/div><\/div>
Fixed<\/div>
- Fixed error when going back with the mobile button on some screens.<\/div><\/div>
Fixed<\/div>
- Update the list of RFID cards or key fobs when activated.<\/div><\/div>
Removed<\/div>
- Deleted Parking message in Payments when Parking is free to avoid confusion.<\/div><\/div>
Added<\/div>
- Payments process opens in the same application for a more comfortable payment process for the user. (It does not work if the user has MI Browser as default on their mobile, it does work for Google Chrome and Safari).<\/div><\/div>
Added<\/div>
- Added notice to the user to resume uploading if they have Payments activated.<\/div><\/div>
Added<\/div>
- New languages available for Trydan.<\/div><\/div>
Added<\/div>
- Dynamic power control and load profiles available for the Pole Pro.<\/div><\/div>
Improved<\/div>
- Significant improvement in the stability of Bluetooth keychains, both via Wi-Fi and Bluetooth.<\/div><\/div>
Improved<\/div>
- Improvement in the design of Special Options.<\/div><\/div>
Improved<\/div>
- Improved Bluetooth search and location on iOS.<\/div><\/div>
Added<\/div>
- Added Trydan compatibility with Enphase inverter.<\/div><\/div>
Added<\/div>
- Added Trydan compatibility with P1 meter.<\/div><\/div>
Added<\/div>
- Added Trydan compatibility with Modbus feeder meter.<\/div><\/div>
Added<\/div>
- Added new additional configurations for MQTT.<\/div><\/div>
Added<\/div>
- Differentiation of types for Solis inverter (With or Without batteries).<\/div><\/div>
Added<\/div>
- Added Romanian to Trydan.<\/div><\/div>
Added<\/div>
- Added phase map settings for Pro Poles in Special Options.<\/div><\/div>
Fixed<\/div>
- Improved view of invoices in English.<\/div><\/div>
Updated<\/div>
- Name change, now the Bluetooth keychains are called e-Keys.<\/div><\/div>
Added<\/div>
- Implementation of DeadLetters to log user errors in the background.<\/div><\/div>
Added<\/div>
- Power sections with intensity limit for Pole Pro.<\/div><\/div>
Fixed<\/div>
- Do not allow deleting e-Charger if the user is offline.<\/div><\/div>
Updated<\/div>
- Increased Bluetooth scanning time on the main screen.<\/div><\/div>
Improved<\/div>
- Improvement in some bluetooth methods.<\/div><\/div>
Added<\/div>
- Added option without meter in the dynamic control of the Pole Pro.<\/div><\/div>
Improved<\/div>
- UX improvement when modifying the e-Charger name.<\/div><\/div>
Added<\/div>
- Important notices when modifying dynamic control to improve UX.<\/div><\/div>
Fixed<\/div>
- Allow the charger to be enabled from within with auto-lock activated.<\/div><\/div>
Improved<\/div>
- Improved Bluetooth stability on the Pole Pro.<\/div><\/div>
Added<\/div>
- New screen, list of slaves available for Pole Pro when acting as Master.<\/div><\/div><\/div><\/div><\/div>
2.2.1<\/div>
ao\u00fbt 7, 2023<\/small><\/div><\/div>
Improved<\/div>
- Improvement in the connectivity and reception of Wi-Fi on the initial screen.<\/div><\/div>
Added<\/div>
- Bluetooth and all its features available for Pole Pro.<\/div><\/div>
Added<\/div>
- Added alternative meter to SolarEdge in Dynamic Control.<\/div><\/div>
Updated<\/div>
- Unify in a single screen, the activation of RFID cards and their edition. (Same for bluetooth keychains)<\/div><\/div>
Updated<\/div>
- Change type Huawei by COM Address.<\/div><\/div>
Added<\/div>
- Added confirmation before updating Firmware.<\/div><\/div>
Fixed<\/div>
- Fixed bug ask Huawei type for any meter or inverter.<\/div><\/div>
Updated<\/div>
- Send to the main screen after rebooting the e-Charger.<\/div><\/div>
Fixed<\/div>
- Fixed bug when showing statistics of uploads made between 22:00 and 00:00.<\/div><\/div>
Fixed<\/div>
- Fixed bug when putting an empty power section name.<\/div><\/div>
Added<\/div>
- More and better translations.<\/div><\/div>
Added<\/div>
- Control of errors in Payments.<\/div><\/div>
Fixed<\/div>
- Fixed Payments bug with the free rate.<\/div><\/div>
Fixed<\/div>
- Fixed bug with time zone in statistics.<\/div><\/div>
Added<\/div>
- Added new Google Home image.<\/div><\/div>
Updated<\/div>
- Change when we make a free transaction in Payments.<\/div><\/div>
Updated<\/div>
- Do not allow to modify Payments if you do not have Internet.<\/div><\/div>
Improved<\/div>
- Offline settings screen will load faster.<\/div><\/div>
Fixed<\/div>
- Fixed small bugs.<\/div><\/div><\/div><\/div><\/div>
2.2.0<\/div>
juin 28, 2023<\/small><\/div><\/div>
Added<\/div>
- In Payments you will see the intensity at which the car will be charged during the transaction and it will be the one that the owner of the e-Charger has set.<\/div><\/div>
Updated<\/div>
- In the photovoltaic gif the value will not be shown if the data is 0 or null.<\/div><\/div>
Added<\/div>
- Now there is a new type of photovoltaic in the power sections, called 'Without injection or isolated'.<\/div><\/div>
Updated<\/div>
- If the language of the device is Euskera, the App will be set to Spanish by default (before it was set to English).<\/div><\/div>
Improved<\/div>
- Improvement in obtaining and uploading statistics via bluetooth.<\/div><\/div>
Added<\/div>
- The power sections are saved on the server and in the cache for correct operation on any different device and in any situation. (With internet, without internet, with bluetooth, etc.)<\/div><\/div>
Fixed<\/div>
- Fixed the photovoltaic gif that was hanging on some IOS devices.<\/div><\/div>
Added<\/div>
- Added bluetooth keychains for Trydans. (They work like RFID in Poles)<\/div><\/div>
Improved<\/div>
- Improved stability of some bluetooth calls<\/div><\/div>
Added<\/div>
- Added informative messages to the user for a better user experience.<\/div><\/div>
Added<\/div>
- The token is only requested once every minute or when entering the application and it is saved in cache for greater speed (Before it was requested with each http call).<\/div><\/div>
Added<\/div>
- Added possibility to reset the e-Charger in 'Special Options'.<\/div><\/div>
Added<\/div>
- Google Home is now available and the corresponding info has been added to the app.<\/div><\/div>
Added<\/div>
- More control of errors in some posts for greater transparency to the user.<\/div><\/div>
Fixed<\/div>
- Fixed some minor bugs.<\/div><\/div>
Improved<\/div>
- Improved the design of the Payments screens.<\/div><\/div><\/div><\/div><\/div>
2.1.9<\/div>
avril 19, 2023<\/small><\/div><\/div>
Added<\/div>
- Restart App when exiting to background more than 30 seconds in IOS.<\/div><\/div>
Updated<\/div>
- Larger button payments without chargers.<\/div><\/div>
Fixed<\/div>
- Fixed push notifications in iOS.<\/div><\/div>
Fixed<\/div>
- Fix problem with google login on IOS when sharing loader.<\/div><\/div>
Fixed<\/div>
- Fixed bug with PVPC 2 format.<\/div><\/div>
Updated<\/div>
- Fixed new QR format.<\/div><\/div>
Fixed<\/div>
- Fixed bug when modifying tariffs.<\/div><\/div>
Improved<\/div>
- Improved reconnection of blutooth on main screen in ios.<\/div><\/div>
Updated<\/div>
- To be able to modify OCPP via bluetooth in Trydans.<\/div><\/div>
Added<\/div>
- Added IP to the wifi info.<\/div><\/div>
Updated<\/div>
- Change in the design of the Payments screen.<\/div><\/div>
Added<\/div>
- Take into account the cost of parking after loading at Payments.<\/div><\/div>
Added<\/div>
- Explanation Static IP Shelly.<\/div><\/div>
Improved<\/div>
- Differentiate between swiping and clicking to lock the loader.<\/div><\/div>
Fixed<\/div>
- Fixed a bug with the download of Payments invoices.<\/div><\/div>
Added<\/div>
- Real-time update of Payments status on the main screen.<\/div><\/div>
Improved<\/div>
- Improved bluetooth stability for certain calls that sometimes failed.<\/div><\/div>
Added<\/div>
- New investors added.<\/div><\/div>
Added<\/div>
- Change in Shelly inverter rates.<\/div><\/div><\/div><\/div><\/div>
2.1.8<\/div>
f\u00e9vrier 13, 2023<\/small><\/div><\/div>
Added<\/div>
- Differentiation between inverters and meters (Smart meters)<\/div><\/div>
Added<\/div>
- New investors added<\/div><\/div>
Added<\/div>
- New warning if you have successfully obtained statistics via bluetooth<\/div><\/div>
Improved<\/div>
- Increased consistency in sending and receiving data via bluetooth<\/div><\/div>
Fixed<\/div>
- Fixed obtaining statistics via bluetooth<\/div><\/div>
Fixed<\/div>
- Fixed bug with photovoltaic gifs<\/div><\/div>
Fixed<\/div>
- Fixing of notifications<\/div><\/div>
Added<\/div>
- Now you are only forced to use the location with the bluetooth activated.<\/div><\/div>
Added<\/div>
- Take into account the batteries in the photovoltaic gif<\/div><\/div>
Improved<\/div>
- Don't let the user enter an empty rfid name and new translations<\/div><\/div>
Updated<\/div>
- Indicate wifi and signal we are connected to<\/div><\/div>
Added<\/div>
- Go to the main screen automatically if you have only one point and are connected to the Internet.<\/div><\/div>
Fixed<\/div>
- Fix bug with one hour less statistics in Canary Islands and other countries<\/div><\/div>
Added<\/div>
- Allow publishers to modify the energy tariff<\/div><\/div><\/div><\/div><\/div>
2.1.7<\/div>
janvier 11, 2023<\/small><\/div><\/div>
Improved<\/div>
- More intuitive change in some screen navigations.<\/div><\/div>
Fixed<\/div>
- Fixed compatibility bug with some Android 8 devices.<\/div><\/div>
Added<\/div>
- Direct access to mode selector from the main screen.<\/div><\/div>
Fixed<\/div>
- Fixed bug when displaying on\/off labels in the configuration.<\/div><\/div>
Added<\/div>
- When editing a power configuration, its name can be changed.<\/div><\/div><\/div><\/div><\/div>
2.1.6<\/div>
janvier 9, 2023<\/small><\/div><\/div>
Added<\/div>
- Added option to save different power settings<\/div><\/div>
Fixed<\/div>
- Fixed bug with mass notification sending on some devices<\/div><\/div>
Added<\/div>
- Cache clearing at logout<\/div><\/div>
Improved<\/div>
- Configuration screen wifi acceleration<\/div><\/div>
Added<\/div>
- New bluetooth icons<\/div><\/div>
Removed<\/div>
- Removed option to turn off or turn on LEDs of poles<\/div><\/div>
Fixed<\/div>
- Fixed bug with time via bluetooth<\/div><\/div>
Improved<\/div>
- Improved translations<\/div><\/div>
Added<\/div>
- Added Dutch language<\/div><\/div>
Added<\/div>
- Added gif to better visualize the photovoltaic installation process.<\/div><\/div><\/div><\/div><\/div>
2.1.5<\/div>
novembre 21, 2022<\/small><\/div><\/div>
Fixed<\/div>
- Bug fix for roles with a different language than English.<\/div><\/div>
Added<\/div>
- Added translations<\/div><\/div>
Fixed<\/div>
- Bug fix with bad connection<\/div><\/div><\/div><\/div><\/div>
2.1.0<\/div>
novembre 2, 2022<\/small><\/div><\/div>
Improved<\/div>
- Application acceleration mainly via wifi and slightly via bluetooth<\/div><\/div>
Added<\/div>
- Added option to calibrate e-Charger<\/div><\/div>
Added<\/div>
- Added advanced options screen (AutoLock and keypad shortcuts)<\/div><\/div>
Added<\/div>
- Change of design to brand color (black)<\/div><\/div>
Updated<\/div>
- Performance improvements in Kostal, V2C 2.0, Ingeteam and SolarEdge<\/div><\/div>
Added<\/div>
- MQTT inverter and Goodwe aggregates<\/div><\/div>
Added<\/div>
- Added new inverters and user help in roles<\/div><\/div>
Fixed<\/div>
- Fixed small bug when changing the e-Charger name<\/div><\/div>
Added<\/div>
- Maximum and minimum load intensity of the dynamic control can be modified depending on the chosen minimum intensity.<\/div><\/div>
Added<\/div>
- Added "No load" type in photovoltaic types<\/div><\/div>
Improved<\/div>
- Improved explanation on the configuration of PV types<\/div><\/div>
Fixed<\/div>
- Fixed bug when entering the dynamic control configuration by shortcut from the main screen.<\/div><\/div>
Updated<\/div>
- Only the e-Charger administrator can modify the dynamic control settings.<\/div><\/div>
Updated<\/div>
- Only the e-Charger administrator can modify the energy tariffs.<\/div><\/div>
Added<\/div>
- Catalan language available<\/div><\/div>
Added<\/div>
- New editor and viewer roles added when sharing an e-Charger<\/div><\/div><\/div><\/div><\/div>
2.0.9<\/div>
septembre 5, 2022<\/small><\/div><\/div>
Added<\/div>
- Free payment available after invitation<\/div><\/div>
Added<\/div>
- Added create, modify, delete payment rates<\/div><\/div>
Added<\/div>
- House and photovoltaic measurements can be consulted even without the car being charged<\/div><\/div>
Added<\/div>
- New SolarEdge inverter<\/div><\/div>
Fixed<\/div>
- Fixing of some specific errors<\/div><\/div>
Added<\/div>
- Help the user to add his first charger<\/div><\/div>
Added<\/div>
- Added option to change the language of the e-Charger from the settings<\/div><\/div>
Improved<\/div>
- Improved view on the main screen if the name of the loader is too long<\/div><\/div>
Added<\/div>
- Added power deviation for photovoltaic-only mode<\/div><\/div>
Added<\/div>
- Added new and improved translations<\/div><\/div>
Improved<\/div>
- Improved wifi listing order by signal quality<\/div><\/div>
Added<\/div>
- New design of the support screens<\/div><\/div>
Added<\/div>
- From now on, new App updates will appear on the main screen.<\/div><\/div>
Added<\/div>
- Direct access to the installation configuration from the main screen of the device<\/div><\/div>
Added<\/div>
- Added Static IP to wifi configuration for Trydan<\/div><\/div>
Added<\/div>
- Added Static IP to Shelly inverter<\/div><\/div>
Added<\/div>
- New Victron inverter added<\/div><\/div>
Added<\/div>
- New wibeee inverter added<\/div><\/div><\/div><\/div><\/div>
2.0.8<\/div>
juillet 19, 2022<\/small><\/div><\/div>
Fixed<\/div>
- Google login is definitely working.<\/div><\/div>
Added<\/div>
- Ingeteam inverter added to the dynamic control.<\/div><\/div>
Fixed<\/div>
- Fixed bug with duplicate notifications.<\/div><\/div>
Added<\/div>
- More labels translated.<\/div><\/div>
Added<\/div>
- Scheduled charging warns if it should be charging and the car is not connected.<\/div><\/div>
Added<\/div>
- OCPP activated is displayed on the device screen.<\/div><\/div>
Fixed<\/div>
- Fixed bug with invoice download on IOS<\/div><\/div><\/div><\/div><\/div>
2.0.6<\/div>
juillet 4, 2022<\/small><\/div><\/div>
Fixed<\/div>
- Error fixes and further clarification of some concepts.<\/div><\/div><\/div><\/div><\/div>
2.0.5<\/div>
juin 16, 2022<\/small><\/div><\/div>
Added<\/div>
- Default language in English, if the language of your device is not set.<\/div><\/div>
Improved<\/div>
- Improved optimization and speed of the application.<\/div><\/div><\/div><\/div><\/div>
2.0.1<\/div>
juin 1, 2022<\/small><\/div><\/div>
Added<\/div>
- It is no longer necessary to choose the model to create an e-Charger.<\/div><\/div>
Added<\/div>
- The user can view and download his invoices<\/div><\/div>
Added<\/div>
- Added pole balancing for poles<\/div><\/div>
Added<\/div>
- Added the possibility to cancel a transaction<\/div><\/div><\/div><\/div><\/div>
2.0<\/div>
mai 18, 2022<\/small><\/div><\/div>
Added<\/div>
Enabling and disabling a scheduled load<\/div><\/div>
Added<\/div>
Added billing data and transaction list<\/div><\/div>
Added<\/div>
Payments added<\/div><\/div><\/div><\/div><\/div>
1.9.9<\/div>
mai 3, 2022<\/small><\/div><\/div>
Added<\/div>
- Dynamic change of status if connection is lost.<\/div><\/div>
Improved<\/div>
- Higher speed on main screen.<\/div><\/div>
Fixed<\/div>
- Fixed bug with sending time via bluetooth.<\/div><\/div>
Added<\/div>
- Added invoicing data.<\/div><\/div><\/div><\/div><\/div>
1.9.8<\/div>
avril 22, 2022<\/small><\/div><\/div>
Improved<\/div>
- Clearer messages when changing the dynamic control.<\/div><\/div>
Fixed<\/div>
- Fixed bug when enabling or disabling scheduling.<\/div><\/div><\/div><\/div><\/div>
1.9.7<\/div>
avril 12, 2022<\/small><\/div><\/div>
Fixed<\/div>
- Fixed error with excess of decimals in the network power.<\/div><\/div>
Fixed<\/div>
- Refreshing the main screen works.<\/div><\/div><\/div><\/div><\/div>
1.9.6<\/div>
avril 11, 2022<\/small><\/div><\/div>
Updated<\/div>
- Clearer design in case the e-Charger is not connected.<\/div><\/div>
Improved<\/div>
- Performance improvements.<\/div><\/div>
Added<\/div>
- The e-Charger's available Wi-Fi networks, via Bluetooth and via Wi-Fi, are displayed, as well as the network to which it is connected.<\/div><\/div>
Improved<\/div>
- Upgrade upgraded firmware.<\/div><\/div>
Added<\/div>
- Added the ability to disable a load to save previous programming.<\/div><\/div>
Improved<\/div>
- Improvements in the sending of statistics by bluetooth.<\/div><\/div><\/div><\/div><\/div>
1.9.5<\/div>
mars 8, 2022<\/small><\/div><\/div>
Improved<\/div>
- Performance improvements in Bluetooth connection.<\/div><\/div>
Improved<\/div>
- Offline speed improvement.<\/div><\/div>
Added<\/div>
- Added specific errors when linking devices.<\/div><\/div>
Added<\/div>
- Added new information on deviceID and WiFi networks.<\/div><\/div>
Improved<\/div>
- Optimization of some processes for greater speed.<\/div><\/div>
Added<\/div>
- Added Fronius inverter.<\/div><\/div><\/div><\/div><\/div>
1.9.4<\/div>
f\u00e9vrier 28, 2022<\/small><\/div><\/div>
Improved<\/div>
- Better design label version on some mobiles.<\/div><\/div>
Fixed<\/div>
- Bug fix: black screen on login with bad connection<\/div><\/div><\/div><\/div><\/div>
1.9.2<\/div>
f\u00e9vrier 24, 2022<\/small><\/div><\/div>
Added<\/div>
- Unification of Android and iOS versions<\/div><\/div>
Added<\/div>
- Added application version under 'Logout'.<\/div><\/div>
Fixed<\/div>
- Bug fix: logged into the app without verifying the account.<\/div><\/div>
Added<\/div>
- Errors when registering a more specific user.<\/div><\/div>
Added<\/div>
- In iOS the last WiFi entered by the user will be saved in a list so that it does not have to be added again and, in addition, the wifi to which the cell phone is connected will be displayed.<\/div><\/div><\/div><\/div><\/div>
1.9.1<\/div>
f\u00e9vrier 17, 2022<\/small><\/div><\/div>
Added<\/div>
- V2C 2.0 meter added on dynamic control<\/div><\/div>
Fixed<\/div>
- Improved French translations.<\/div><\/div>
Added<\/div>
- The statistics panels will not be visible if the cell phone does not have a good Internet connection.<\/div><\/div>
Updated<\/div>
- Input with faster and more stable bad WiFi connection.<\/div><\/div>
Added<\/div>
- New, more specific errors are highlighted for the user and installers.<\/div><\/div>
Fixed<\/div>
- Fix for black panel bug when adding WiFi when linking a new device.<\/div><\/div>
Fixed<\/div>
- Fixed bugs when linking devices with QR.<\/div><\/div><\/div><\/div><\/div>
1.8<\/div>
janvier 28, 2022<\/small><\/div><\/div>
Added<\/div>
- App translated to French.<\/div><\/div>
Fixed<\/div>
- QR code bug fix.<\/div><\/div><\/div><\/div><\/div>
1.7<\/div>
janvier 17, 2022<\/small><\/div><\/div>
Fixed<\/div>
- Bug fixes and performance improvements.<\/div><\/div><\/div><\/div><\/div>
1.6<\/div>
janvier 14, 2022<\/small><\/div><\/div>
Added<\/div>
- Fix in the dark mode design.<\/div><\/div><\/div><\/div><\/div>
1.5<\/div>
d\u00e9cembre 17, 2021<\/small><\/div><\/div>
Added<\/div>
- New, more attractive designs of some images.<\/div><\/div>
Added<\/div>
- New logo and initial splash design.<\/div><\/div>
Updated<\/div>
- Improved connectivity to recharging points via Bluetooth.<\/div><\/div>
Fixed<\/div>
- Correction of bugs found.<\/div><\/div>
Improved<\/div>
- Improved application performance.<\/div><\/div><\/div><\/div><\/div>
1.4.2<\/div>
octobre 15, 2021<\/small><\/div><\/div>
Fixed<\/div>
- Functional bugs corrected.<\/div><\/div>
Improved<\/div>
- Improved Bluetooth version.<\/div><\/div><\/div><\/div><\/div>
1.4.1<\/div>
septembre 6, 2021<\/small><\/div><\/div>
Fixed<\/div>
- Default language bug fix (if the device language is not available, the application will be displayed in Spanish).<\/div><\/div><\/div><\/div><\/div>
1.4<\/div>
ao\u00fbt 13, 2021<\/small><\/div><\/div>
Fixed<\/div>
- Bug fixes.<\/div><\/div>
Added<\/div>
- Built-in Bluetooth.<\/div><\/div>
Added<\/div>
- App translated into Portuguese, German and English depending on the language of the device.<\/div><\/div><\/div><\/div><\/div><\/div>\n<\/div><\/div>\n\n\n\n
\n

V2C Cloud Portal<\/h2><\/div>\n\n\n
3.3.2<\/div>
f\u00e9vrier 13, 2026<\/small><\/div><\/div>
Added<\/div>
New option to link an e-Charger to a company.<\/div><\/div>
Improved<\/div>
New tariffs added.<\/div><\/div><\/div><\/div><\/div>
3.3.1<\/div>
janvier 8, 2026<\/small><\/div><\/div>
Added<\/div>
Button to generate a payment URL without using the e-Charger app in Payments.<\/div><\/div>
Improved<\/div>
New PDFs in Spanish and English in Payments.<\/div><\/div>
Fixed<\/div>
Charging power limit in Denka.<\/div><\/div><\/div><\/div><\/div>
3.3.0<\/div>
d\u00e9cembre 17, 2025<\/small><\/div><\/div>
Added<\/div>
Share chargers via email.<\/div><\/div>
Improved<\/div>
Option to select the auto-lock time for Trydan with version 2.3.25 or later.<\/div><\/div>
Added<\/div>
Stop charging when the selected percentage is reached for Denka models.<\/div><\/div>
Added<\/div>
POS icon.<\/div><\/div>
Added<\/div>
Ability to view more chargers on the main page.<\/div><\/div>
Added<\/div>
Calculator in Payments tariffs.<\/div><\/div><\/div><\/div><\/div>
3.2.16<\/div>
novembre 12, 2025<\/small><\/div><\/div>
Added<\/div>
Tags added when downloading \u201cCharging Sessions\u201d.<\/div><\/div>
Improved<\/div>
Design update when adding or modifying tariffs in Payments.<\/div><\/div><\/div><\/div><\/div>
3.2.15<\/div>
octobre 16, 2025<\/small><\/div><\/div>
Updated<\/div>
Updated API info URL.<\/div><\/div>
Fixed<\/div>
Fixed issues in cloud installation.<\/div><\/div><\/div><\/div><\/div>
3.2.14<\/div>
octobre 13, 2025<\/small><\/div><\/div>
Fixed<\/div>
Fixed errors related to RFID cards.<\/div><\/div>
Improved<\/div>
Filters added in the \u201cNumber of chargers\u201d section.<\/div><\/div><\/div><\/div><\/div>
3.2.13<\/div>
septembre 24, 2025<\/small><\/div><\/div>
Added<\/div>
New meter added: LINKY.<\/div><\/div>
Added<\/div>
Catalan language added.<\/div><\/div>
Fixed<\/div>
Fixed issues in cloud power control.<\/div><\/div><\/div><\/div><\/div>
3.2.12<\/div>
septembre 15, 2025<\/small><\/div><\/div>
Fixed<\/div>
Fixed errors in power control profiles and in the meter list.<\/div><\/div><\/div><\/div><\/div>
3.2.11<\/div>
septembre 3, 2025<\/small><\/div><\/div>
Updated<\/div>
Improved RFID cards to support manual entry of up to 14 characters.<\/div><\/div>
Added<\/div>
Added local power control configuration for Trydan\/Trydan Pro.<\/div><\/div><\/div><\/div><\/div>
3.2.10<\/div>
ao\u00fbt 8, 2025<\/small><\/div><\/div>
Fixed<\/div>
Bug fixes.<\/div><\/div><\/div><\/div><\/div>
3.2.9<\/div>
juillet 8, 2025<\/small><\/div><\/div>
Added<\/div>
Phase map within the charging profiles in Trydan.<\/div><\/div>
Added<\/div>
Status filter (online\/offline) now available for e-Chargers.<\/div><\/div>
Improved<\/div>
Display of e-Charger version on the main page.<\/div><\/div><\/div><\/div><\/div>
3.2.8<\/div>
juin 16, 2025<\/small><\/div><\/div>
Improved<\/div>
Grouping of types in Payments invoices.<\/div><\/div><\/div><\/div><\/div>
3.2.7<\/div>
juin 9, 2025<\/small><\/div><\/div>
Added<\/div>
Visibility of the maximum power label added when creating or editing the charger layout.<\/div><\/div>
Fixed<\/div>
Fixed date range filtering in Payments and the control panel.<\/div><\/div><\/div><\/div><\/div>
3.2.6<\/div>
mai 27, 2025<\/small><\/div><\/div>
Improved<\/div>
Increase in the maximum number of power control profiles.<\/div><\/div>
Added<\/div>
Serial number added to Enphase inverter.<\/div><\/div><\/div><\/div><\/div>
3.2.5<\/div>
mai 5, 2025<\/small><\/div><\/div>
Added<\/div>
Option for an additional QR code in OCPP customisation on Pole Pro.<\/div><\/div>
Updated<\/div>
Optional OCPP customisation properties on Pole Pro.<\/div><\/div>
Added<\/div>
Italian language support on Pole Pro.<\/div><\/div><\/div><\/div><\/div>
3.2.4<\/div>
mars 20, 2025<\/small><\/div><\/div>
Added<\/div>
Maximum intensity configuration of the e-Charger in Pole Pro power control.<\/div><\/div>
Improved<\/div>
More intuitive power profile creation.<\/div><\/div><\/div><\/div><\/div>
3.2.3<\/div>
mars 4, 2025<\/small><\/div><\/div>
Added<\/div>
Explanatory message about the function of community garages.<\/div><\/div>
Updated<\/div>
Greater reduction in the zoom of cloud power control and the option to reset zoom changed to center the installation.<\/div><\/div>
Improved<\/div>
Visual improvements when creating power profiles for cloud power control.<\/div><\/div><\/div><\/div><\/div>
3.2.2<\/div>
f\u00e9vrier 13, 2025<\/small><\/div><\/div>
Added<\/div>
Sharing e-Chargers in community garages.<\/div><\/div>
Improved<\/div>
Option to download statistics as a .xlsx file.<\/div><\/div>
Fixed<\/div>
Fixed various minor bugs.<\/div><\/div><\/div><\/div><\/div>
3.2.1<\/div>
f\u00e9vrier 6, 2025<\/small><\/div><\/div>
Improved<\/div>
Power or intensity limitation based on model when adding or editing e-Chargers in power control cloud.<\/div><\/div>
Improved<\/div>
Added waiting indicator when saving an installation in power control cloud.<\/div><\/div>
Updated<\/div>
Modified text and colour according to the e-Charger status in power control cloud.<\/div><\/div>
Fixed<\/div>
e-Charger images in installation view in power control cloud.<\/div><\/div><\/div><\/div><\/div>
3.2.0<\/div>
janvier 27, 2025<\/small><\/div><\/div>
Added<\/div>
Ability to save installations as drafts in Power Control Cloud.<\/div><\/div>
Improved<\/div>
Move and zoom within an installation using the mouse wheel in Power Control Cloud.<\/div><\/div>
Added<\/div>
Right-click menu in Power Control Cloud.<\/div><\/div>
Added<\/div>
Select, copy, paste, duplicate, and delete multiple elements in Power Control Cloud.<\/div><\/div>
Updated<\/div>
Upper power limit modified in charging profiles.<\/div><\/div>
Fixed<\/div>
Various minor bugs fixed.<\/div><\/div><\/div><\/div><\/div>
3.1.3<\/div>
d\u00e9cembre 23, 2024<\/small><\/div><\/div>
Improved<\/div>
Performance improvements on the e-Chargers page and control panel.<\/div><\/div>
Updated<\/div>
New way of displaying e-Charger details.<\/div><\/div>
Added<\/div>
OCPP information included in the e-Chargers table.<\/div><\/div>
Added<\/div>
Basque language added.<\/div><\/div>
Fixed<\/div>
Various minor bugs fixed.<\/div><\/div><\/div><\/div><\/div>
3.1.2<\/div>
d\u00e9cembre 10, 2024<\/small><\/div><\/div>
Fixed<\/div>
Various minor bugs fixed.<\/div><\/div>
Added<\/div>
Current and power limits of circuit breakers displayed in the functional view of the installation in Power Control Cloud.<\/div><\/div>
Improved<\/div>
Enhanced interaction between elements when creating or editing an installation in Power Control Cloud to prevent inconsistencies.<\/div><\/div>
Added<\/div>
Right-click to delete an active element during the creation or editing of an installation in Power Control Cloud.<\/div><\/div>
Updated<\/div>
V2C Payments transaction table now sorted in descending date order.<\/div><\/div>
Added<\/div>
Customer email now appears when downloading the V2C Payments transaction table.<\/div><\/div><\/div><\/div><\/div>
3.1.1<\/div>
novembre 25, 2024<\/small><\/div><\/div>
Fixed<\/div>
Fixed errors in displaying the power control settings.<\/div><\/div>
Updated<\/div>
New validations added when creating tariffs in V2C Payments.<\/div><\/div>
Improved<\/div>
Faster loading of the main page.<\/div><\/div><\/div><\/div><\/div>
3.1.0<\/div>
novembre 18, 2024<\/small><\/div><\/div>
Added<\/div>
New design of the v2c.cloud portal<\/div><\/div><\/div><\/div><\/div>
2.2.0<\/div>
mars 20, 2023<\/small><\/div><\/div>
Added<\/div>
- Automated translations to facilitate proofreading and adding new translations in the future.<\/div><\/div>
Fixed<\/div>
- Fixing various bugs, updating and improving translations and user experience.<\/div><\/div>
Improved<\/div>
- Higher speed also in the main screen, and in the loading of the user's e-Chargers.<\/div><\/div>
Updated<\/div>
- Added all inverters and meters in the App.<\/div><\/div>
Improved<\/div>
- Change of the parallel configuration for faster data loading speed.<\/div><\/div><\/div><\/div><\/div>
2.1.0<\/div>
d\u00e9cembre 12, 2022<\/small><\/div><\/div>
Added<\/div>
- Modify, delete and functional view buttons on smart charging<\/div><\/div>
Improved<\/div>
- Accelerated charging of e-Chargers<\/div><\/div>
Added<\/div>
- Added list of wifi networks<\/div><\/div>
Fixed<\/div>
- Fixed smart charging zoom problem<\/div><\/div>
Added<\/div>
- Added hamburger menu for better visualization of the canvas in smart charging<\/div><\/div>
Updated<\/div>
- Change navbar to black<\/div><\/div>
Added<\/div>
- Added management of shared users<\/div><\/div>
Added<\/div>
- Added translations<\/div><\/div>
Added<\/div>
- Added user help for csv downloading<\/div><\/div>
Added<\/div>
- Romanian language added<\/div><\/div>
Added<\/div>
- Added partner creation form<\/div><\/div><\/div><\/div><\/div>
2.0.0<\/div>
septembre 5, 2022<\/small><\/div><\/div>
Added<\/div>
- Added Smart Charging<\/div><\/div><\/div><\/div><\/div>
1.9.0<\/div>
juin 15, 2022<\/small><\/div><\/div>
Added<\/div>
- Add RFID cards to multiple chargers at once and control token loss<\/div><\/div>
Updated<\/div>
- Image labels also translated<\/div><\/div>
Added<\/div>
- Added customer invitations<\/div><\/div><\/div><\/div><\/div>
1.8.0<\/div>
avril 11, 2022<\/small><\/div><\/div>
Updated<\/div>
- New home screen design<\/div><\/div>
Fixed<\/div>
- Fixed bug with changed colors when logging out<\/div><\/div>
Fixed<\/div>
- Fix in invoices, it did not download the one that was due.<\/div><\/div>
Fixed<\/div>
- Transactions are now not delayed, and change in the tariff format<\/div><\/div>
Fixed<\/div>
- Fixed problem in payments with moving tabs<\/div><\/div>
Added<\/div>
- Added csv with Payments customer billing information<\/div><\/div>
Added<\/div>
- Added to main screen charger in paid or unpaid mode with icon<\/div><\/div>
Fixed<\/div>
- Fixed 'Update software' and bug with charger statuses<\/div><\/div>
Added<\/div>
- New translations added<\/div><\/div><\/div><\/div><\/div>
1.7.0<\/div>
f\u00e9vrier 8, 2022<\/small><\/div><\/div>
Added<\/div>
- Added OCPP table<\/div><\/div>
Added<\/div>
- Added Payments option<\/div><\/div>
Added<\/div>
- Added invoices in new tab and can be downloaded<\/div><\/div>
Improved<\/div>
- Improved device loading<\/div><\/div>
Improved<\/div>
- Improved designs to make them responsive on all devices<\/div><\/div>
Added<\/div>
- Added flat rate or customized rate when adding tariffs<\/div><\/div><\/div><\/div><\/div>
1.6.0<\/div>
d\u00e9cembre 27, 2021<\/small><\/div><\/div>
Added<\/div>
- A\u00f1adido ticket y arreglado bug en las estadisticas<\/div><\/div>
Updated<\/div>
- Add loader in the same way as in the app<\/div><\/div>
Fixed<\/div>
- Bug fixes and design improvements<\/div><\/div>
Updated<\/div>
- We show fewer decimals in the tables<\/div><\/div>
Added<\/div>
- Added charger plus<\/div><\/div>
Updated<\/div>
- Change side menu design and some labels<\/div><\/div>
Updated<\/div>
- Removed donuts and changed the design of the screen up button<\/div><\/div>
Fixed<\/div>
- Font design and login and main screen arrangement<\/div><\/div><\/div><\/div><\/div>
1.4.0<\/div>
ao\u00fbt 23, 2021<\/small><\/div><\/div>
Added<\/div>
- Added device mac in configuration<\/div><\/div>
Added<\/div>
- Added software update in the configuration<\/div><\/div>
Fixed<\/div>
- Change rate is done correctly<\/div><\/div>
Added<\/div>
- Cost calculation according to tariff<\/div><\/div>
Fixed<\/div>
- Controlled wifi switch error without connection<\/div><\/div>
Fixed<\/div>
- Energy rate calculation is done correctly<\/div><\/div><\/div><\/div><\/div>
1.3.0<\/div>
juin 7, 2021<\/small><\/div><\/div>
Fixed<\/div>
- Dynamic power control is switched appropriately<\/div><\/div>
Fixed<\/div>
- Global statistics are now updated correctly<\/div><\/div>
Fixed<\/div>
- Fixed hours main screen<\/div><\/div>
Updated<\/div>
- Design change if no connection<\/div><\/div>
Added<\/div>
- New graphics design<\/div><\/div>
Improved<\/div>
- Screen loading improves without connection<\/div><\/div>
Fixed<\/div>
- Download csv data in correct format<\/div><\/div>
Added<\/div>
- Login can now be entered with enter<\/div><\/div><\/div><\/div><\/div>
1.2.0<\/div>
avril 12, 2021<\/small><\/div><\/div>
Added<\/div>
- V2C 2.0 meter added in the dynamic control.<\/div><\/div>
Added<\/div>
- New, more specific errors are highlighted for the user and installers.<\/div><\/div>
Fixed<\/div>
- Fixed bugs when linking devices.<\/div><\/div><\/div><\/div><\/div>
1.1.0<\/div>
f\u00e9vrier 8, 2021<\/small><\/div><\/div>
Added<\/div>
- New, more attractive designs of some images.<\/div><\/div>
Improved<\/div>
- Improvements in web performance.<\/div><\/div>
Fixed<\/div>
- Functional bugs corrected.<\/div><\/div><\/div><\/div><\/div>
1.0<\/div>
d\u00e9cembre 1, 2020<\/small><\/div><\/div>
Added<\/div>
- Web translated into Portuguese, German and English depending on the language selected by the user.<\/div><\/div>
Fixed<\/div>
- Bug fixes.<\/div><\/div>
Added<\/div>
- Style improvements.<\/div><\/div>
Added<\/div>
- Creation of the V2C website.<\/div><\/div><\/div><\/div><\/div><\/div>\n<\/div><\/div>\n","protected":false},"excerpt":{"rendered":"

Updates Nous travaillons continuellement \u00e0 l\u2019am\u00e9lioration des fonctionnalit\u00e9s de nos produits. Consultez toutes les mises \u00e0 jour des e-Chargers et de l\u2019application multiplateforme V2C Cloud. Trydan Pole Pro Denka Screen V2C Cloud mobile V2C Cloud portal web Trydan Pole Pro Si vous pr\u00e9f\u00e9rez consulter les mises \u00e0 jour de la version pr\u00e9c\u00e9dente de Pole, cliquez … Lire la suite<\/a><\/p>\n","protected":false},"author":400,"featured_media":170349,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_eb_attr":"","content-type":"","_uag_custom_page_level_css":"","footnotes":""},"class_list":["post-103222","page","type-page","status-publish","has-post-thumbnail"],"yoast_head":"\nV2C Updates : Derni\u00e8res \u00e9volutions de nos chargeurs \u00e9lectriques<\/title>\n<meta name=\"description\" content=\"Chez V2C, nous travaillons constamment \u00e0 l'am\u00e9lioration des fonctionnalit\u00e9s de nos chargeurs de voitures \u00e9lectriques. D\u00e9couvrez les derni\u00e8res mises \u00e0 jour.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/v2charge.com\/fr\/updates\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"V2C Updates : Derni\u00e8res \u00e9volutions de nos chargeurs \u00e9lectriques\" \/>\n<meta property=\"og:description\" content=\"Chez V2C, nous travaillons constamment \u00e0 l'am\u00e9lioration des fonctionnalit\u00e9s de nos chargeurs de voitures \u00e9lectriques. D\u00e9couvrez les derni\u00e8res mises \u00e0 jour.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/v2charge.com\/fr\/updates\/\" \/>\n<meta property=\"og:site_name\" content=\"V2C\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/V2C.Charge\" \/>\n<meta property=\"article:modified_time\" content=\"2025-12-22T11:09:23+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"675\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:site\" content=\"@V2C_Charge\" \/>\n<meta name=\"twitter:label1\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data1\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/v2charge.com\/fr\/updates\/\",\"url\":\"https:\/\/v2charge.com\/fr\/updates\/\",\"name\":\"V2C Updates : Derni\u00e8res \u00e9volutions de nos chargeurs \u00e9lectriques\",\"isPartOf\":{\"@id\":\"https:\/\/v2charge.com\/fr\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/v2charge.com\/fr\/updates\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/v2charge.com\/fr\/updates\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg\",\"datePublished\":\"2023-05-19T09:23:20+00:00\",\"dateModified\":\"2025-12-22T11:09:23+00:00\",\"description\":\"Chez V2C, nous travaillons constamment \u00e0 l'am\u00e9lioration des fonctionnalit\u00e9s de nos chargeurs de voitures \u00e9lectriques. D\u00e9couvrez les derni\u00e8res mises \u00e0 jour.\",\"breadcrumb\":{\"@id\":\"https:\/\/v2charge.com\/fr\/updates\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/v2charge.com\/fr\/updates\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\/\/v2charge.com\/fr\/updates\/#primaryimage\",\"url\":\"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg\",\"contentUrl\":\"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg\",\"width\":1200,\"height\":675,\"caption\":\"V2C Electric Chargers\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/v2charge.com\/fr\/updates\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"V2C\",\"item\":\"https:\/\/v2charge.com\/fr\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Updates\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/v2charge.com\/fr\/#website\",\"url\":\"https:\/\/v2charge.com\/fr\/\",\"name\":\"V2C\",\"description\":\"#CargandoElMa\u00f1ana\",\"publisher\":{\"@id\":\"https:\/\/v2charge.com\/fr\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/v2charge.com\/fr\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/v2charge.com\/fr\/#organization\",\"name\":\"V2C\",\"url\":\"https:\/\/v2charge.com\/fr\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\/\/v2charge.com\/fr\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/11\/cropped-v2c-charge-logo-menu.png\",\"contentUrl\":\"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/11\/cropped-v2c-charge-logo-menu.png\",\"width\":984,\"height\":431,\"caption\":\"V2C\"},\"image\":{\"@id\":\"https:\/\/v2charge.com\/fr\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/V2C.Charge\",\"https:\/\/x.com\/V2C_Charge\",\"https:\/\/www.instagram.com\/v2c.charge\/\",\"https:\/\/www.youtube.com\/@V2C\",\"https:\/\/www.linkedin.com\/company\/v2c-chargers\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"V2C Updates : Derni\u00e8res \u00e9volutions de nos chargeurs \u00e9lectriques","description":"Chez V2C, nous travaillons constamment \u00e0 l'am\u00e9lioration des fonctionnalit\u00e9s de nos chargeurs de voitures \u00e9lectriques. D\u00e9couvrez les derni\u00e8res mises \u00e0 jour.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/v2charge.com\/fr\/updates\/","og_locale":"fr_FR","og_type":"article","og_title":"V2C Updates : Derni\u00e8res \u00e9volutions de nos chargeurs \u00e9lectriques","og_description":"Chez V2C, nous travaillons constamment \u00e0 l'am\u00e9lioration des fonctionnalit\u00e9s de nos chargeurs de voitures \u00e9lectriques. D\u00e9couvrez les derni\u00e8res mises \u00e0 jour.","og_url":"https:\/\/v2charge.com\/fr\/updates\/","og_site_name":"V2C","article_publisher":"https:\/\/www.facebook.com\/V2C.Charge","article_modified_time":"2025-12-22T11:09:23+00:00","og_image":[{"width":1200,"height":675,"url":"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_site":"@V2C_Charge","twitter_misc":{"Dur\u00e9e de lecture estim\u00e9e":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/v2charge.com\/fr\/updates\/","url":"https:\/\/v2charge.com\/fr\/updates\/","name":"V2C Updates : Derni\u00e8res \u00e9volutions de nos chargeurs \u00e9lectriques","isPartOf":{"@id":"https:\/\/v2charge.com\/fr\/#website"},"primaryImageOfPage":{"@id":"https:\/\/v2charge.com\/fr\/updates\/#primaryimage"},"image":{"@id":"https:\/\/v2charge.com\/fr\/updates\/#primaryimage"},"thumbnailUrl":"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg","datePublished":"2023-05-19T09:23:20+00:00","dateModified":"2025-12-22T11:09:23+00:00","description":"Chez V2C, nous travaillons constamment \u00e0 l'am\u00e9lioration des fonctionnalit\u00e9s de nos chargeurs de voitures \u00e9lectriques. D\u00e9couvrez les derni\u00e8res mises \u00e0 jour.","breadcrumb":{"@id":"https:\/\/v2charge.com\/fr\/updates\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/v2charge.com\/fr\/updates\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/v2charge.com\/fr\/updates\/#primaryimage","url":"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg","contentUrl":"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg","width":1200,"height":675,"caption":"V2C Electric Chargers"},{"@type":"BreadcrumbList","@id":"https:\/\/v2charge.com\/fr\/updates\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"V2C","item":"https:\/\/v2charge.com\/fr\/"},{"@type":"ListItem","position":2,"name":"Updates"}]},{"@type":"WebSite","@id":"https:\/\/v2charge.com\/fr\/#website","url":"https:\/\/v2charge.com\/fr\/","name":"V2C","description":"#CargandoElMa\u00f1ana","publisher":{"@id":"https:\/\/v2charge.com\/fr\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/v2charge.com\/fr\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/v2charge.com\/fr\/#organization","name":"V2C","url":"https:\/\/v2charge.com\/fr\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/v2charge.com\/fr\/#\/schema\/logo\/image\/","url":"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/11\/cropped-v2c-charge-logo-menu.png","contentUrl":"https:\/\/v2charge.com\/wp-content\/uploads\/2024\/11\/cropped-v2c-charge-logo-menu.png","width":984,"height":431,"caption":"V2C"},"image":{"@id":"https:\/\/v2charge.com\/fr\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/V2C.Charge","https:\/\/x.com\/V2C_Charge","https:\/\/www.instagram.com\/v2c.charge\/","https:\/\/www.youtube.com\/@V2C","https:\/\/www.linkedin.com\/company\/v2c-chargers\/"]}]}},"uagb_featured_image_src":{"full":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg",1200,675,false],"thumbnail":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers-150x150.jpg",150,150,true],"medium":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers-300x169.jpg",300,169,true],"medium_large":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers-768x432.jpg",768,432,true],"large":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers-1024x576.jpg",1024,576,true],"gs-tiny":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg",50,28,false],"xl":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg",1200,675,false],"xxl":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg",1200,675,false],"xxxl":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg",1200,675,false],"xxxxl":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg",1200,675,false],"xxxxxl":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg",1200,675,false],"1536x1536":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg",1200,675,false],"2048x2048":["https:\/\/v2charge.com\/wp-content\/uploads\/2024\/07\/v2c-electric-chargers.jpg",1200,675,false]},"uagb_author_info":{"display_name":"V2C","author_link":"https:\/\/v2charge.com\/fr\/author\/marketing\/"},"uagb_comment_info":0,"uagb_excerpt":"Updates Nous travaillons continuellement \u00e0 l\u2019am\u00e9lioration des fonctionnalit\u00e9s de nos produits. Consultez toutes les mises \u00e0 jour des e-Chargers et de l\u2019application multiplateforme V2C Cloud. Trydan Pole Pro Denka Screen V2C Cloud mobile V2C Cloud portal web Trydan Pole Pro Si vous pr\u00e9f\u00e9rez consulter les mises \u00e0 jour de la version pr\u00e9c\u00e9dente de Pole, cliquez\u2026","_links":{"self":[{"href":"https:\/\/v2charge.com\/fr\/wp-json\/wp\/v2\/pages\/103222","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/v2charge.com\/fr\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/v2charge.com\/fr\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/v2charge.com\/fr\/wp-json\/wp\/v2\/users\/400"}],"replies":[{"embeddable":true,"href":"https:\/\/v2charge.com\/fr\/wp-json\/wp\/v2\/comments?post=103222"}],"version-history":[{"count":2,"href":"https:\/\/v2charge.com\/fr\/wp-json\/wp\/v2\/pages\/103222\/revisions"}],"predecessor-version":[{"id":292070,"href":"https:\/\/v2charge.com\/fr\/wp-json\/wp\/v2\/pages\/103222\/revisions\/292070"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/v2charge.com\/fr\/wp-json\/wp\/v2\/media\/170349"}],"wp:attachment":[{"href":"https:\/\/v2charge.com\/fr\/wp-json\/wp\/v2\/media?parent=103222"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}