Ενημερώσεις
Τι αλλάζει σε κάθε έκδοση υλικολογισμικού των φορτιστών μας και της πλατφόρμας V2C Cloud.
Πρόσφατα: Denka 1.1.0 · 12 Νοέ 2026
Trydan και Trydan Pro
Τρέχουσα έκδοση 2.5.2 · Εκδόσεις: 47, πρώτη: Φεβρουάριος 2022
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- ΝέοDirect query of OCPP status
- ΝέοNew Solplanet/AISWEI Inverter
- ΝέοNew Hoymiles Inverter
- ΝέοBattery discharge control: GoodWe, SolarEdge
- ΝέοHuawei inverters direct connection without Dongle
- ΝέοUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- ΝέοNew "Unlimited" Wake-up 5 mode available from the LCD
- ΝέοImprovements in Bluetooth cybersecurity
- ΒελτίωσηFixes in FV mode + Minimum power
- ΒελτίωσηOCPP: duplicate BootNotifications are avoided
- ΒελτίωσηSecurity menu lock during vehicle charging
- ΒελτίωσηImprovements for Linky-LORA
Προηγούμενες εκδόσεις 46
-
- ΝέοCompatibility with SigEnergy inverters
- ΝέοNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- ΝέοWiFi connection for Deye inverters via Elfin
- ΝέοExpansion to 105 RFID cards
- ΝέοPAP/CHAP authentication for 4G connection
- ΝέοMore stable OCPP connections
- ΒελτίωσηReading the P1 and Victron meters is more reliable in the event of communication failures.
- ΒελτίωσηStability of mixed three-phase charging
- ΒελτίωσηError reporting and diagnostic system
- ΒελτίωσηImprovement of home battery charging priority in PV charging modes
-
- ΝέοManagement of home battery discharge in charging profiles
- ΝέοUnlocking the Trydan by smartphone proximity
- ΝέοNew models of SofarSolar and Azzurro inverters
- ΝέοAdded current and voltage per phase in Home Assistant and Modbus API.
- ΝέοWiFi connection in Deye inverters
- ΝέοIncrease of up to 80 RFID cards
- ΝέοBattery compatibility in SolarEdge inverters
- ΝέοScroll text for long texts
- ΒελτίωσηOptimization of Ethernet network interface
- ΒελτίωσηImprovements in the Modbus TCP client
- ΒελτίωσηImprovements in mixed three-phase charging
- ΒελτίωσηImprovement of texts in German
- ΒελτίωσηIncrease the voltage range of the installation from the control panel.
-
- ΔιόρθωσηOCPP password bug
- ΔιόρθωσηProblems connecting to CSMS after restarts
-
- ΝέοTarget charge kWh
- ΝέοNew SMA Sunny Boy model
- ΝέοNew Fronius model with battery
- ΝέοSelect Modbus API address ID
- ΝέοNew Deye models
- ΝέοSofar Solar inverters
- ΝέοAzzurro inverters
- ΝέοSelect MID address
- ΝέοEMMA Huawei
- ΝέοSecurity Profile 2 OCPP (wss + auth + CA cert)
- ΝέοPrivate 4G SIMs in OCPP
- ΝέοOcppFreeMode
- ΝέοOCPP internal queue messages
- ΒελτίωσηTime synchronization
- ΒελτίωσηPower plate measurements 1.0
- ΒελτίωσηWiFi improvements
- ΔιόρθωσηExclusive mode bug with batteries
- ΔιόρθωσηCoordinate "ContractedPower" and load profiles with HTTP API.
- ΔιόρθωσηImprove RFID errors
- ΔιόρθωσηMixed load bug
- ΔιόρθωσηBug photovoltaic mode + minimum
- ΔιόρθωσηBug statistics without FV via BLE
-
- ΝέοMIFARE Ultralight RFID cards
- ΒελτίωσηMore robust OTA update
- ΔιόρθωσηBug management autolock with payments mode
- ΔιόρθωσηBug in payments mode with RFID
-
- ΒελτίωσηInstallation problem readings
- ΒελτίωσηImprovement in BYD mode
- ΔιόρθωσηBug with Wibeee inverter
-
- ΝέοObtain firmware version via Modbus
- ΝέοGoodWe via Modbus TCP
- ΝέοOCPP: FirmwareManagement
- ΝέοAutolock
- ΝέοNew MID models
- ΝέοNew wake-up modes
- ΝέοAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- ΝέοLinky meter for French meters
- ΝέοModbus termination resistance
- ΝέοReading individual properties HTTP API
- ΝέοTurn off/Turn on logo and LCD from HTTP API
- ΕνημέρωσηImprovements in dynamic control
- ΕνημέρωσηImprovement in Sungrow inverter measurements
- ΕνημέρωσηImprovements in the OTA update
- ΕνημέρωσηImprovements in the button panel menu
- ΕνημέρωσηNew Deye models
- ΕνημέρωσηOCPP: improvement in MeterValues
- ΕνημέρωσηOCPP: send StatusNotification "Faulted" with errors and warnings
- ΕνημέρωσηOCPP: publish current version
- ΕνημέρωσηOCPP: BootNotification timeout
- ΕνημέρωσηNew NTP servers
- ΕνημέρωσηImproved WI-FI scanning
- ΕνημέρωσηImprovement in P1 meter
- ΕνημέρωσηImprovement in remote logs
- ΕνημέρωσηIoT call limitation per charger
- ΕνημέρωσηImprove RAM memory
- ΕνημέρωσηStability via Ethernet
- ΕνημέρωσηCorrected translations
- ΔιόρθωσηError "Waiting for Power"
- ΔιόρθωσηBug with RFID cards with long names
- ΔιόρθωσηBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- ΔιόρθωσηImprove statistics via Bluetooth
- ΔιόρθωσηLocal balancing improvements for up to 10 devices
- ΔιόρθωσηBug when sending RFID code in the statistics
- ΔιόρθωσηBug with Exclusive PV mode and batteries
-
- ΝέοStatic power control is added (only with Trydan consumption).
- ΝέοMixed charging adapts to European rates.
- ΝέοPower control programming with phase limits is allowed.
- ΝέοThe power control adapts to European countries with phase current limits.
- ΕνημέρωσηThe power control algorithm has been modified step by step to apply PID modulation.
- ΕνημέρωσηThe static power control between sockets or between e-Chargers is improved.
- ΔιόρθωσηThe failure of remote records is avoided when a disconnection occurs.
-
- ΔιόρθωσηBug DTSU666-G meters
-
- ΒελτίωσηImprovement in Wake Mode
- ΔιόρθωσηFixed bug when changing the port in MQTT.
-
- ΝέοEcoCharging to schedule charging automatically during the cheapest daylight hours.
- ΝέοTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- ΝέοCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- ΝέοFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- ΝέοImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- ΝέοImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- ΝέοOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- ΝέοOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- ΝέοOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- ΒελτίωσηReading the power value of the batteries in Goodwe EH and ET inverters.
- ΒελτίωσηSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- ΒελτίωσηImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- ΒελτίωσηImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- ΒελτίωσηImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- ΒελτίωσηOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- ΒελτίωσηOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- ΒελτίωσηOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- ΔιόρθωσηOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- ΝέοVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- ΝέοSAJ hybrid inverters
- ΝέοShelly Pro meters
- ΝέοInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- ΝέοDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- ΝέοTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- ΒελτίωσηLeak detection
- ΒελτίωσηMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- ΒελτίωσηModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- ΒελτίωσηVisualization of the RFID card authentication process in OCPP
- ΒελτίωσηThe memory used in JSON and OCPP goes to the SPI RAM.
- ΔιόρθωσηInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- ΔιόρθωσηCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- ΝέοAdaptation of OCPP to new central systems
- ΝέοNew Deye models
- ΒελτίωσηImprovements in the direction detection of the V2C 2.0 control box
- ΔιόρθωσηLEDs blink when there is no connection.
- ΔιόρθωσηBug in Greenheiss hybrid
-
- ΝέοDeye / Turbo Energy three-phase
- ΝέοShelly Pro EM and Shelly Pro 3EM (Beta)
- ΒελτίωσηShow text on bidirectional meters
- ΒελτίωσηReadings with Fronius and DTSU666
- ΒελτίωσηReaction times in the leak detector
- ΒελτίωσηShow Waiting for Charge in Stop mode
- ΔιόρθωσηBug with French language
- ΔιόρθωσηRaise the HTTP server via Ethernet
- ΔιόρθωσηBug in payments
- ΔιόρθωσηRead-only in the OCPP properties
- ΔιόρθωσηSave power segments via Bluetooth on some devices.
- ΔιόρθωσηShelly Portugal measurements
-
- ΝέοLive Remote Logs
- ΒελτίωσηShow stop due to dynamic control
- ΒελτίωσηRestarts due to reconnection attempts
- ΒελτίωσηQA Protocol
- ΒελτίωσηVoltage and Temperature Reading Power PCB
- ΔιόρθωσηNaN measurement on some meters
- ΔιόρθωσηError in Home Wizard readings
-
- ΒελτίωσηPerformance improvement and future compatibility between Trydan and Trydan Pro.
- ΒελτίωσηImprovements in OCPP protocol
- ΒελτίωσηImprovements in the QA process
- ΒελτίωσηImprovement in memory usage
- ΒελτίωσηMore robust statistics
-
- ΝέοNetworks with WPA3 security
- ΝέοNew BLE (NimBLE)
- Νέοe-keys via BLE connection
- ΝέοNew language: Romanian
- ΝέοEnphase version 7.x.x, Solis with batteries
- ΝέοAdaptation of the i2c power board
- ΒελτίωσηAzure library update
- ΒελτίωσηUpdate of ESP-IDF and Arduino-ESP32 libraries
- ΒελτίωσηInvestor communication via WiFi connection without Internet
- ΒελτίωσηImprovement in V2C 2.0 meter refresh rate
- ΒελτίωσηImprovement in OCPP, adaptation to support disconnections
- ΒελτίωσηImprovement in key fob detection
- ΒελτίωσηImproved refresh rate
- ΒελτίωσηImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- ΔιόρθωσηModification of Deye/Turbo Energy batteries
- ΔιόρθωσηCustomizable MQTT topics and username/password
- ΔιόρθωσηDisconnection statistics report
- ΔιόρθωσηBLE compatibility of iPhone
- ΔιόρθωσηOperation of V2C 2.0 meter at night
- ΔιόρθωσηAutomatic date and time
- ΔιόρθωσηInteraction with Megane
-
- ΝέοBug in photovoltaic three-phase mode
- ΒελτίωσηWiFi recovery routine
-
- ΝέοMixed three-phase charging available through the physical menu.
- ΝέοAdded three-phase MID Meter
- ΝέοInclusion of server ID 2 in SolarEdge inverters
- ΝέοAdded Modbus registers with the meter measurement.
- ΝέοHTTP commands added for integration with HA.
- ΝέοEnphase Envoy Inverter (beta) (versions 5.x.x)
- ΝέοV2C 2.0 error detection of clamp not connected
- ΝέοMQTT Slave with user/password authentication and customizable topics (beta)
- ΒελτίωσηImprovement of the WatchDog to prevent system freezing
- ΒελτίωσηImprovement of nearby WiFi scanning
- ΒελτίωσηBluetoothLE service reconnection protocol
- ΒελτίωσηWiFi optimization IRAM and affinity with the Azure task
- ΒελτίωσηReconnection protocol in the absence of WiFi
- ΒελτίωσηFactory reset
- ΒελτίωσηThe error code and LED interface
- ΒελτίωσηImproved the Isolated Installation mode and zero feed-in.
- ΒελτίωσηReduction in cut-off time through dynamic control to 1 min
- ΒελτίωσηAutomatic detection of time and time zone
- ΒελτίωσηThe optimization and refactoring of the measurement slaves
- ΒελτίωσηUnlocking with BLE Tag
- ΔιόρθωσηOccasional LCD freezes
- ΔιόρθωσηFalse positives from the leak detector
- ΔιόρθωσηProblems with the MID Meter
- ΔιόρθωσηLED error during update
- ΔιόρθωσηDefault value for JSON type variables
- ΔιόρθωσηMeasurement at 0 in Deye/TurboEnergy Inverter
- ΔιόρθωσηVisual errors and local balancing address assignment
-
- ΝέοSolar Discount on Shortcuts
- ΝέοDeye/TurboEnergy Inverter Beta
- ΝέοPhoenix Contact meter
- ΝέοCarlo Gavazzi meter
- ΒελτίωσηOCPP improvements and tested in MONTA
- ΒελτίωσηProblems in dynamic control
- ΒελτίωσηReconnections and WiFi Stability
- ΔιόρθωσηFrozen LCD
-
- ΝέοIsolated Mode in Photovoltaic Modes
- ΝέοDutch, Danish, and Valencian
- ΝέοLeak sensor modes (installer menu)
- ΝέοMID meter (installer menu)
- ΝέοNew Ingeteam protocol (Battery Management)
- ΝέοThree-phase meters DTSU666
- ΝέοSDM three-phase meters
- ΒελτίωσηLocal Balancing Protocol and priorities
- ΒελτίωσηDetection of ports and hosts in OCPP
- ΒελτίωσηStable version of SMA Sunny Boy
- ΒελτίωσηPortuguese version of Wibeee
- ΒελτίωσηFronius measuring home consumption
- ΔιόρθωσηUnexpected locks and unlocks
- ΔιόρθωσηWhite blinking in locked mode removed
- ΔιόρθωσηError selecting the slaves in beta
- ΔιόρθωσηError of SolarEdge three-phase inverters
-
- ΝέοChanges and improvements in calibration
-
- ΒελτίωσηCalibration adapted to the new hardware
- ΔιόρθωσηData analysis in Kostal Piko fixed
-
- ΝέοLocal balancing between Trydans available via WiFi or wired connection.
- ΝέοSDM-220/320/120 (Tested with the Eastron brand)
- ΝέοDDSU-666 Meter (Common in Huawei installations)
- ΝέοSelf-calibrating without the need for a car
- ΝέοManual hour available
- ΝέοHTTP requests to manage the logs
- ΝέοNew Modbus Registers
- ΝέοGreenheiss inverters
- ΝέοSAJ inverters
- ΝέοWired Solis inverters
- ΝέοResponse time in configurable dynamic control
- ΒελτίωσηConfigurable installation voltage
- ΒελτίωσηNew manufacturing process
- ΒελτίωσηIncluded Shelly three-phase but without FV measurement.
- ΒελτίωσηCar consumption via MQTT fixed
- ΒελτίωσηImproved and more intuitive physical menu
- ΣυμβατότηταBeta models of Goodwe: the battery measurement is canceled.
- ΔιόρθωσηBug in Max and Min Intensity via Modbus fixed.
- ΔιόρθωσηFalse positives in the leak detector fixed
-
- ΝέοPrevention of conflicts between slaves and the cloud
- ΔιόρθωσηGoodWe conflicts and Azure initialization
- ΔιόρθωσηFix in Shelly with only three-phase.
-
- ΒελτίωσηPending statistics will be sent only once.
- ΒελτίωσηShelly 3EM three-phase and modification for Portugal
- ΔιόρθωσηModbus Multiple Readings Hotfix
-
- ΝέοNew Modbus registers
- ΝέοRFID reader in alpha version
- ΝέοSolaX X3 híbrido compatible
- ΝέοAvailable calibration and shortcuts via WiFi
- ΒελτίωσηOCPP Improvements
- ΒελτίωσηImprovement in WiFi scanning
- ΒελτίωσηImprovement in reconnection routines
- ΔιόρθωσηBluetooth timezone failure
- ΔιόρθωσηError in Trydan synchronization - APP
- ΔιόρθωσηStatic IP configuration in Trydan via WiFi
- ΔιόρθωσηError saving Modbus parameters
-
- ΝέοNew method for calibrating communication with the car
- ΝέοBeta version of the GoodWe ET/EH/BT/BH
- ΒελτίωσηImprovement in the communication analysis with the car
-
- ΝέοAuto lock after 60 seconds without a car (shortcut)
- ΝέοModification for Three-Phase Installations in Portugal for V2C 2.0
- ΝέοKostal Piko is added.
- ΒελτίωσηReformulation of the Dynamic Control Algorithm
- ΒελτίωσηImprovement in the refresh rate of Huawei inverters
- ΒελτίωσηSolarEdge stable (Meter measuring export)
- ΒελτίωσηStable version of GoodWe
- ΒελτίωσηDetection of state D and E according to protocol
- ΒελτίωσηImproved QA process
- ΔιόρθωσηStored in memory after writings via Modbus TCP and RTU
- ΔιόρθωσηBug in the FV measurements and peaks resolved for V2C 2.0
-
- ΝέοGoodWe in beta version
- ΝέοCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- ΒελτίωσηMQTT in stable version
- ΒελτίωσηVictron in stable version
- ΒελτίωσηImproved connection with Azure
-
- ΝέοMQTT slave beta version
- ΒελτίωσηDetection of power direction in Wibeee
- ΔιόρθωσηThe Victron and SolarEdge inverters were bringing down the system.
-
- ΝέοSolarEdge inverter added (Beta)
- ΝέοVictron inverter added (Beta)
- ΝέοAutolock enabled in shortcut (60 s)
- ΝέοAutomatic time zone detection
- ΝέοAlternative meter for car consumption (RS485)
- ΝέοFV Exclusive with configurable variation
- ΝέοNew Languages (French, Italian, and German)
- ΔιόρθωσηFixed error in minimum power mode.
-
- ΒελτίωσηImprovements in Dynamic Control with batteries
- ΒελτίωσηImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- ΔιόρθωσηResolved the IP configuration issues for Trydan with WiFi and BLE.
- ΔιόρθωσηResolved the issues with the IP configuration of Shelly BLE.
-
- ΝέοInclusion of the Wibeee meter
- ΝέοSlave 2.0 compatible with Type 1 and Type 2 installation
- ΝέοChange in the established connection blinking
- ΝέοDetection and measurement of bifacial load
- ΝέοImprovement in the collection and transmission of charging data
- ΝέοAlternative Meter Phoenix Contact (ModbusRTU)
- ΝέοModbusRTU in Trydan (simultaneous slave and master)
- ΝέοStatic IP configuration in Trydan
- ΝέοPossibility to select the IP in Shelly
- ΒελτίωσηInclusion of maximum intensity in OCPP (as a property)
- ΒελτίωσηImprovement in the reading of Solax inverters
- ΒελτίωσηInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- ΒελτίωσηModbusRTU and Modbus TCP server in Trydan
- ΕνημέρωσηFirst stable version of Ingeteam
- ΕνημέρωσηImprovement in the speed of the leak detector
-
- ΔιόρθωσηError solution in manufacturing when saving WiFi
-
- ΝέοEliminate false communication errors from the slaves.
- ΝέοSave the first Shelly that Trydan connects to.
- ΕνημέρωσηWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- ΒελτίωσηImprovement in telemetry recovery in OCPP
- ΒελτίωσηImprovement in scanning nearby WiFi networks
-
- ΝέοInternal Azure ping every 15 seconds to detect disconnections.
- ΝέοSeparate reconnections to avoid crashing the server.
- ΝέοOCPP adaptation to work with Home Assistant
- ΒελτίωσηMigration of the I2C for the clock and LCD to native idf
-
- ΒελτίωσηIncrease maximum binary size in local webServer
- ΔιόρθωσηRecovery of OCPP transactions to prevent telemetry failures
-
- ΝέοThe configuration of different IDs for Huawei inverters is added.
- ΒελτίωσηCorrection of the power reading of the house
- ΔιόρθωσηCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- ΝέοPayment Method (V2C Payments)
- ΝέοOCPP Protocol
- ΒελτίωσηImprovement of WiFi and Bluetooth stability and reconnection
- ΔιόρθωσηReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- ΔιόρθωσηCorrection of the maximum file size for updates on Local Server
-
- ΝέοList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- ΒελτίωσηReconnection with V2C Cloud after communication loss
- ΔιόρθωσηCorrected Shelly and Solax routines
-
- ΝέοShortcuts on the buttons: Lock and Charging Schedule
- ΝέοLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- ΝέοAP mode when the configured WiFi is not available
- ΒελτίωσηImprovement in LED error codes
- ΒελτίωσηAdaptation for compatibility with Huawei inverters
-
- ΝέοWe added connectivity with Fronius inverters.
- ΒελτίωσηImprovements in screen writing and removal of strange characters
- ΒελτίωσηImprovement in the transmission of statistics via both WiFi and BLE.
-
- ΝέοError correction x and y
Alva
Τρέχουσα έκδοση 1.0.4 · Εκδόσεις: 5, πρώτη: Αύγουστος 2026
Βελτιώσεις στη συνεδρία φόρτισης και την ασφάλεια BLE
- ΒελτίωσηΔιαχείριση συνεδρίας φόρτισης
- ΒελτίωσηΜεγαλύτερη ασφάλεια BLE
- ΔιόρθωσηΣφάλμα στην εμφάνιση του χρόνου και της ενέργειας στην εφαρμογή και το Installer Panel.
Προηγούμενες εκδόσεις 4
-
- ΔιόρθωσηΣφάλμα με τον αντιστροφέα Ingeteam
- ΔιόρθωσηΣφάλμα με μετρητή Homewizard P1
- ΔιόρθωσηΣφάλμα με μετρητή Eastron
- ΔιόρθωσηΣφάλμα με τον αντιστροφέα GoodWe
-
- ΝέοΣύνδεση με Home Assistant
- ΝέοΛογική καθημερινού επαναφοράς
- ΒελτίωσηΞεκλείδωμα με μπρελόκ και RFID
- ΒελτίωσηΔιαχείριση εξαιρέσεων, watchdog και καθαρισμός σφαλμάτων
-
- ΝέοΑναγνώριση συνδέσμου μέσω LED
- ΒελτίωσηΛογική επανεκκίνησης
- ΔιόρθωσηΣφάλμα στο payment σχετικό με τον χρόνο
-
- ΝέοΛογική QA και κατασκευής
- ΒελτίωσηΔιαχείριση συνεδριών και στους δύο συνδέσμους
- ΔιόρθωσηΜικρές διορθώσεις σφαλμάτων
Pole Pro
Τρέχουσα έκδοση 6.1.3 · Εκδόσεις: 47, πρώτη: Μάιος 2023
Έχετε το προηγούμενο Pole; Δείτε τις ενημερώσεις του.
- ΔιόρθωσηThe charger no longer hangs when rebooting while shutting down the 4G module or dynamic power control
Προηγούμενες εκδόσεις 46
- 6.1.2ΔιόρθωσηOCPP security event notifications are no longer sent when the connection uses no security profile (profile 0), since some central systems do not support them
-
- ΔιόρθωσηCorrected default APN for Wireless Logic SIM cards in Belgium
-
- ΝέοAudible buzzer feedback
- ΝέοSupport for registering multiple RFID cards
- ΝέοReading of the installation meter over Modbus RS485 on DC chargers
- ΝέοDynamic power control for DC installations — master and slave units now share and honor the installation power limit
- ΝέοLive display of actual consumption versus offered current on the charger screen
- ΝέοOn-screen guidance walks the user through registering an RFID card
- ΝέοOCPP connection password can now be set from the Cloud and Bluetooth
- ΝέοOCPP now supports security profiles, encrypted TLS connections and Basic Authentication for the central system
- ΒελτίωσηLanguage codes standardized to the ISO 639-1 format
- ΒελτίωσηReduced volume of messages sent to the Cloud
- ΒελτίωσηTime synchronization with the CSMS no longer floods the system log
- ΒελτίωσηLog rotation no longer loses history when the disk is full
- ΒελτίωσηSafer firmware updates
- ΒελτίωσηMore reliable connectivity with automatic failover between Ethernet and 4G
- ΒελτίωσηCharges history now loads page by page instead of the whole history at once, for a faster tab
- ΔιόρθωσηMeasurer error message now reads clearly
- ΔιόρθωσηMore accurate meter-reading validation
- ΔιόρθωσηCharge metrics are preserved if a charge is interrupted unexpectedly
- ΔιόρθωσηScreen orientation set in configuration is now applied correctly
- ΔιόρθωσηFree-charge mode could not be disabled from the installer panel
- ΔιόρθωσηDynamic power limit was not applied at tariff/hour boundaries, briefly leaving an installation without a limit
- ΔιόρθωσηResolved random service restarts (crashes) caused by network device discovery
-
- ΒελτίωσηMore reliable RFID card reading with optimized antenna configuration from first use
- ΒελτίωσηImproved stability and responsiveness of the charger's web interface
-
- ΝέοOCPP - Immediate "Preparing" status when receiving a remote start command via OCPP
- ΝέοWiFi disabled by default on devices without WiFi configured
- ΒελτίωσηMore reliable RFID card reading with periodic reader reinitialization
- ΒελτίωσηBetter cable connection detection and RFID timeout handling
- ΒελτίωσηCDP - More stable network device discovery, preventing unnecessary register/unregister cycles
- ΒελτίωσηImproved stability when applying configuration changes to the charger
- ΒελτίωσηAutomatic migration of legacy pending OCPP messages after update
- ΒελτίωσηImproved network handling when switching between manual and automatic IP configuration
- ΔιόρθωσηPower factor value conversion for Carlo Gavazzi meters
- ΔιόρθωσηImprovements in power measurement accuracy in single-phase or two-phase installations
- ΔιόρθωσηOCPP - Smart Charging profiles with defined duration now applied correctly
- ΔιόρθωσηOCPP - Local authentication cache overflow that could prevent charging sessions from startIing
- ΔιόρθωσηOCPP - OCPP transactions stuck due to unreleased semaphores or null keys
-
- ΝέοEnhanced web server for accessing and editing charger properties
- ΝέοVisual improvements to the web server interface
- ΝέοPersistent price display on screen when the payment system is active
- ΝέοRefined error reporting to the cloud
- ΝέοPower loss detection
- ΝέοWi-Fi disable option from the installer panel
- ΝέοNew buzzer system implementation for white boards
- ΒελτίωσηEnhanced RFID calibration with on-screen indicator during the process
- ΒελτίωσηRFID reader no longer forcibly activates when OCPP or Payments are active; explicit configuration is respected
- ΒελτίωσηRefined cable connect/disconnect notification on each event when payments are active
- ΒελτίωσηOptimized RFID card readings
- ΒελτίωσηOCPP - Improvements to the offline transaction queue
- ΒελτίωσηInternal connection optimization and overall performance improvements
- ΔιόρθωσηOCPP - Improved measurement value reporting
- ΔιόρθωσηRefined out-of-range measurement error detection
-
- ΝέοSoftware-level leak detection enable/disable
- ΒελτίωσηAdjusted cooldown time between charges when a leak is detected
- ΒελτίωσηOCPP - Improvements to the offline transaction queue
-
- ΒελτίωσηWhen OCPP is active, we now show on screen when card passed is not registered in central system.
- ΔιόρθωσηAfter update OCPP image and QR is now recovered.
-
- ΔιόρθωσηFixed issue where it didn't allow a remote start if a car is connected but not in an active transaction.
- ΔιόρθωσηFixed issue in setup interface.
- ΔιόρθωσηFixed monophasic Carlo Gavazzi measurer.
- ΔιόρθωσηFixed OCPP issue where it wouldn't charge in connector 2 if connector 1 is charging.
-
- ΒελτίωσηImproved network features mainly 4G connection.
-
- ΒελτίωσηImproved OCPP charge handling.
- ΒελτίωσηEnhanced reliability in the smart charging logic.
- ΒελτίωσηImproved features when stopping a charge with invalid identifiers.
- ΒελτίωσηImproved QR configuration for OCPP.
- ΒελτίωσηImproved error handling when sensors or communication components fail.
- ΒελτίωσηBetter log management to prevent the device’s storage from filling up.
- ΒελτίωσηImproved USB connection features.
- ΒελτίωσηImproved RFID calibration and detection display.
- ΒελτίωσηImproved features related to Bluetooth.
- ΒελτίωσηImproved dynamic power control allowing charge at minimum intensity if master is not detected.
-
- ΝέοManual timezone setting is now available – The user will be able to configure the timezone even if automatic detection is disabled
- ΝέοCreated a contingency page in case app is not running
- ΝέοAdded Italian option for screen
- ΝέοAdded default payment QR to pay without app
- ΝέοAdded new OCPP personalization options - The user can now set 2 QR codes on the screen
- ΒελτίωσηImproved updater
- ΒελτίωσηImproved network connections
- ΒελτίωσηImproved OCPP meter values
- ΒελτίωσηImproved discovering devices when dynamic control is active
- ΒελτίωσηImproved user interface when updates are in progress
- ΒελτίωσηLocal load balancing is now implemented as dynamic control based specific conditions
- ΒελτίωσηImproved Bluetooth connection
- ΒελτίωσηImproved 4g connections robustness
- ΒελτίωσηImproved STM32 lock timings
- ΒελτίωσηImproved OCPP now allows external intensity limits
- ΒελτίωσηImproved data consumption
- ΔιόρθωσηWhen locking a connector while charging, it now sends end charge telemetry correctly
- ΔιόρθωσηFixed dynamic control issues
- ΔιόρθωσηFixed Carlo Gavazzi power meter
- ΔιόρθωσηFixed OCPP LMS, diagnostics, and charging profile clearing
-
- ΝέοAdded shared library
- ΝέοTimezone can be set manually
- ΝέοTime is now synced with Central System if OCPP is active
- ΒελτίωσηImproved version/update manager
- ΒελτίωσηImproved megabyte conversion of Network Monitor
- ΒελτίωσηObtaining timezone now doesn't need to have correct time by using only http urls
- ΒελτίωσηMobile usb device name is now obtained dynamically since more usb ports might be used due to TPV
- ΔιόρθωσηFixed power control issues
- ΔιόρθωσηFixed that when locking connector during a charge it now ends correctly
- ΔιόρθωσηRecalculate reboot time when changing time with ble
- ΔιόρθωσηWe now show on screen when non registered RFID is passed while OCPP is active
- ΔιόρθωσηFixed OCPP freemode rfid issues
- ΔιόρθωσηDuplicate StatusNotifications are removed from offline queue
- ΔιόρθωσηFixed "infinite" OCPP offline queue issue
-
- ΝέοAPN can now be set manually
- ΒελτίωσηWe now show on screen different wifi images depending on how strong signal is to let know the user how good the connection is
- ΒελτίωσηGeneral OCPP improvements: we check connection to CS instead of internet for local functioning, we notify a real value now when there's a stop transaction due to power loss, fixed edge cases where connectivity is lost, new ocpp key MaxEVCurrentOffered implemented which limits charge with key instead of smart charging handler, safety mechanisms for ocpp to be more robust
- ΒελτίωσηIn 4g, increased rssi range for "excellent" so that it indicates correctly when the reception is good
- ΒελτίωσηImproved data consumption
- ΒελτίωσηImproved robustness of update
- ΕνημέρωσηAccess point time increased to 15 minutes
- ΔιόρθωσηHandled issues when SSID has whitespace
-
- ΔιόρθωσηAccess point improvements.
- ΔιόρθωσηFixed QA issues.
-
- ΝέοNew direct method to obtain additional information for Smart Charging.
- ΝέοFixed random reboot time.
- ΒελτίωσηFixed unset RFID.
- ΒελτίωσηFixed Unknown measurer and made distinction between Unknown measurer and wrongly configured measurer.
- ΒελτίωσηOCPP Free mode can be toggled through OCPP keys.
- ΕνημέρωσηFixed BLE connection with iphone and fixed bluetooth communication error that appeared on app.
- ΕνημέρωσηNetwork improvements. No interface resets performed at boot which improves bootup time. Network changes now don't require reboot. When changing WIFI settings or ip ethernet settings, it connects after setting it instead of rebooting.
- ΔιόρθωσηFixed issue where things on screen were missing in one connector chargers.
- ΔιόρθωσηFixed time/timezone issue caused when the date is off by a few days.
- ΔιόρθωσηNew property added to toggle if vehicle should be able to charge even though measurers aren't working ( Only works when OCPP, payments or dynamic control isn't enabled ).
-
- ΝέοReflect on screen when charge is paused.
- ΝέοMade reboot time random.
- ΔιόρθωσηIncreased SAS token time to live of azure.
-
- ΝέοChanges made to reduce network usage that can be toggled on or off.
- ΝέοFixed case where config is corrupted or missing and would give trouble at startup.
- ΝέοWe now send dead letter if cpu gets too hot and cpu temperature is now logged.
- ΒελτίωσηFixed OCPP inverted measurer error.
- ΒελτίωσηAdded mechanism to disable or enable Wifi and bluetooth.
- ΒελτίωσηWe now report information regarding which type of connection to the internet the e-charger has.
- ΕνημέρωσηChanged led colors. Switched State A (now white) and State B (now green) colors.
- ΔιόρθωσηFixed set threshold values and neopixel leds of Stm32. We can now also obtain control pilot value from Stm32.
- ΔιόρθωσηOCPP ConnectionTimeOut value can now be changed on the fly.
- ΔιόρθωσηWe now report iccid of sim card is connected. If sim is connected but we can't obtain iccid, we send dead letter.
- ΔιόρθωσηFixed log download of http interface.
-
- ΝέοLTE signal is now reflected correctly instead of always showing great signal.
- ΒελτίωσηFixed wathdog reboot after doing hard reset.
-
- ΝέοAdded dynamic photovoltaic.
- ΝέοAdded dead letters: measurer fails and kernel error.
- ΝέοProperty "wifi_info" is now reported.
- ΝέοProperty "wifi_static" can be set through ble.
- ΝέοWe can now obtain statistics through direct method.
- ΝέοAdded individual log level for each type of logger.
- ΝέοAdded neopixel led type for stm32.
- ΝέοWe can now set threshold values with stm32 and get control pilot value if debug log of "Stm32" is activated.
- ΒελτίωσηImprovements in dynamic control, fabrication, QA, Azure, OCPP, config handling, 4g, access point and stm32.
- ΒελτίωσηWe now obtain timezone through url.
- ΒελτίωσηRemoved raspbian logo and desktop during boot and added V2C logo.
- ΒελτίωσηChanged default language after fabrication from english to spanish.
- ΕνημέρωσηGeneral bug fixes.
- ΔιόρθωσηWhen downgrading we ensure that version we downgrade to is compatible.
-
- ΝέοFixed property "ocpp" change bug.
- ΒελτίωσηProperties "powerweekday", "powerweekend" and "phase_map" can be changed through bluetooth.
- ΒελτίωσηChanged configuration handling to differentiate internally and externally set variables so that externally set or obtained variables are handled accordingly following the property schemas.
- ΔιόρθωσηWe now report wifi_static with static ip configuration.
- ΔιόρθωσηStatistics are now saved locally.
-
- ΒελτίωσηMeasurer fails are now registered with modbusrtumeasurer.
- ΒελτίωσηScreen font bigger for small title.
- ΔιόρθωσηValidate configuration with schemas during loading.
-
- ΝέοOCPP authorize can now function by connector.
- ΝέοOCPP WSS connection.
- ΝέοFixed OCPP parent id tag bug.
- ΝέοOCPP meter values now work for 3 phases.
- ΒελτίωσηFixed error 3 not appearing on screen.
- ΒελτίωσηFixed energy by hour bug.
- ΒελτίωσηChanged measurer reading approach for faster reads.
- ΒελτίωσηWith dynamic balancing we now show used and available power in frontend.
-
- ΒελτίωσηWe show dynamic balancing information on screen.
- ΒελτίωσηSimplified handling of configuration.
- ΒελτίωσηImproved dynamic balancing.
-
- ΒελτίωσηCharger won't reboot if car is in state B and OCPP or Payments is active.
- ΒελτίωσηWhen car changes from state C to B, charge information will persist on screen.
- ΒελτίωσηCurrent state charge now reports errors.
- ΒελτίωσηAdded configuration property validation.
- ΔιόρθωσηDirect method to obtain dynamic balancing information.
- ΔιόρθωσηGeneral dynamic balancing improvements.
- ΔιόρθωσηOCPP improvements.
-
- ΔιόρθωσηChanged remaining set_basic_unreported_config to set_basic_config.
-
- ΝέοFix dynamic control bug, powerbytram is not being updated.
- ΝέοFixed bug where whitelist of reported items wasn't being applied and properties weren't being stored in database.
- ΒελτίωσηRemoved non-repetitive logger.
- ΒελτίωσηChanged access point interface to change apn, with manual mode or mobile operator mode.
- ΕνημέρωσηRefactored config charge box. Removed BASIC_UNREPORTED and created whitelist of properties to report.
- ΕνημέρωσηPhase map is now not applied to installation meters.
- ΔιόρθωσηFixed payment bug where a charge couldn't be started properly if charge was started with the hose unlocked.
- ΔιόρθωσηFix bug with power being zero, dynamic control failing when there are no connectors.
- 3.1.8ΕνημέρωσηForce WIFI and bluetooth GPIO pins for compute module 4 to work.
- 3.1.7ΕνημέρωσηForce 4g GPIO pins for compute module 4 to work.
-
- ΒελτίωσηWhen we detect that measurers aren't working, we send an unblock command in case there's a charge and the charger has lost power.
- ΒελτίωσηCreate section BASIC_UNREPORTED for properties that are used but we don't want to report.
- ΒελτίωσηLocked value has persistance when measurers fail.
- ΔιόρθωσηWhen we don't receive petitions from chromium we now press enter and Ctrl+F5 if there's anything we need to accept.
-
- ΔιόρθωσηChanging WIFI configuration with bluetooth now reboots the charge point.
-
- ΒελτίωσηFixed configuration file so that software works with compute module 3 and 4.
- ΒελτίωσηChanged reboot logic. It will now reboot if there's a car connected but charge is not allowed.
- ΔιόρθωσηChanged payments qr code.
- ΔιόρθωσηWe can change log level with property.
-
- ΔιόρθωσηMeter values fixed. We now send wh instead of kwh.
-
- ΝέοPause is now reset when it goes back to state A.
- ΝέοShow measurer error as "Error 3" on connector. Behaviour is that connector is locked until it's fixed.
- ΝέοSet wire connected again.
- ΒελτίωσηFixed general network errors. Improved access point and wifi connectivity.
- ΔιόρθωσηFixed error where timezone wasn't set correctly so time appeared incorrectly.
- ΔιόρθωσηFixed payment_max_mode timeout bug.
-
- ΝέοFixed power, it was shown in W and is now in Kw.
- ΒελτίωσηChange timezone automatically.
- ΔιόρθωσηAdded triphasic phoenix contact measurer.
- ΑφαίρεσηFixed removal of grey notification update.
-
- ΝέοWhenever there's an action that provokes rebooting, it will show on screen that it's going to reboot and the cause.
- ΝέοScreen orientation can now be set and depending on parameter.
- ΝέοAdded error message 1 and 2.
- ΝέοBluetooth patch so that bluetooth initialization takes less time.
- ΝέοCreated patch system. System level changes will be applied with this system.
- ΒελτίωσηMeasurer refactoring.
- ΒελτίωσηImei obtention improved.
- ΒελτίωσηInitial version of bluetooth finished: Obtain properties change basic properties, program charge, reboot, add rfid and change wifi.
- ΒελτίωσηBoot improvements. "Page not found" isn't shown anymore. Boot is faster. There's a gif indicating that system is starting.
- ΒελτίωσηObsolete properties are now deleted automatically so that they aren't reported.
- ΕνημέρωσηRFID can now function with payments. If RFID is enabled with payments, registered cards will be able to start charges. If RFID is disabled with payments, no card will be able to start a charge.
- ΔιόρθωσηLimited number of messages we can send to iothub.
- ΔιόρθωσηIn OCPP, fixed sending of meter values. Now sending in wh and not in kwh.
- ΔιόρθωσηBoot patch so that GPIO pin initialization takes less time.
- ΔιόρθωσηMonophasic measurer Eastron SDM220 implemented.
- ΔιόρθωσηImproved robustness on all direct methods.
- ΔιόρθωσηFixed bug where it didn't reconnect properly to iothub when it disconnected.
- ΔιόρθωσηCreated direct method to put a QR code on the OCPP screen.
- ΑφαίρεσηRemoved wire_connected event telemetry.
- 3.0.9ΔιόρθωσηFixed ocpp meter value Energy.Active.Import, when measurer is flipped.
-
- ΕνημέρωσηFixed error where e-Charger couldn't obtain dns when connected with WIFI.
- ΔιόρθωσηFixed local load balancing when one connector was charging. Now when one connector is charging, it will charge at the set intensity.
- 3.0.7ΔιόρθωσηFixed ocpp Remote Start Transaction and Remote Stop Transaction.
- 3.0.6ΔιόρθωσηFixed error that ocurred in ocpp where it didn't clear properly the idtag when finishing a transaction.
-
- ΕνημέρωσηChanged access point ip from 192.168.44.1 to 192.168.4.1
- ΕνημέρωσηWe now report the charger's state instead of the requested vehicle state.
- ΕνημέρωσηChanged access point master password.
- ΔιόρθωσηFixed websocket connection issue with nuitka compilation.
-
- ΒελτίωσηImproved update logs.
- 3.0.3ΝέοMoved Version from center to right side and added V. before the version number.
- 3.0.2ΒελτίωσηSTM will now detect SPI bus communication errors and will automatically reset.
-
- ΝέοScreen now shows when RFID card is registered.
- ΝέοTop bar now shows version and if access point is accessible.
- ΝέοAccess point interface now has, local load balancing, rfid card registering and log download.
- ΝέοCheck that compute module and board have been created properly.
- ΒελτίωσηScreen is now monitored so that it refreshes in the case that no requests have been made after 15 seconds.
- ΒελτίωσηQA diagnostic is obtained through access point.
- ΒελτίωσηReduced access point available time to 10 minutes.
- ΔιόρθωσηFixed bug where connector stopped working properly when sending intensity 0.
-
- ΝέοInitial Version
Denka
Τρέχουσα έκδοση 1.1.0 · Εκδόσεις: 10, πρώτη: Οκτώβριος 2025
- ΝέοΔυναμικός έλεγχος ισχύος μεταξύ πολλών φορτιστών Denka και Pole στην ίδια εγκατάσταση, με αυτόματη κατανομή ανάλογα με τη διαθέσιμη ισχύ.
- ΝέοΈνας κύριος Denka μπορεί να διαβάσει τον μετρητή της εγκατάστασης μέσω RS485 για να διανείμει την ισχύ σε όλο το σπίτι.
- ΝέοΗ μέγιστη ισχύς του δυναμικού ελέγχου ρυθμίζεται σε kW από την πλατφόρμα V2C.
- ΝέοOCPP: Συμβατότητα με προφίλ ασφαλείας OCPP 0, 1, 2 και 3, και με αυθεντικοποίηση Basic Auth; ο κωδικός πρόσβασης OCPP μπορεί να αλλάξει από το cloud, το Bluetooth και τον τοπικό ιστό.
- ΝέοOCPP: Τα εσωτερικά σφάλματα του φορτιστή ειδοποιούνται στο CSMS μέσω StatusNotification
- ΝέοΙστορικό φορτίσεων με λεπτομερείς μετρήσεις κάθε συνεδρίας (ενέργεια ανά ώρα, τελική κατάσταση φόρτισης και όριο οχήματος), σελιδοποιημένο στην τοπική ιστοσελίδα.
- ΒελτίωσηΠιο σταθερή επικοινωνία με το μοντέλο ισχύος, με πολύ λιγότερα σφάλματα κατά τη φόρτιση και χωρίς ψευδείς ειδοποιήσεις σφάλματος κατά την εκκίνηση.
- ΒελτίωσηΠιο αξιόπιστες επανεκκινήσεις του φορτιστή.
- ΒελτίωσηΤαχύτερη σύνδεση 4G στο δίκτυο, με προεπιλεγμένο APN και υποστήριξη για SIMs Wireless Logic.
- ΒελτίωσηΔίκτυο: Σημαντικές βελτιώσεις στη διαχείριση της σύνδεσης των δικτύων. Πιο σταθερή αυτόματη αλλαγή μεταξύ Ethernet, WiFi και 4G, και σωστή εφαρμογή στατικής IP.
- ΒελτίωσηΔιαχείριση χώρου στο δίσκο: τα αρχεία καταγραφής περιστρέφονται και περιορίζονται χωρίς απώλεια ιστορικού και αποφεύγεται η πλήρωση της μνήμης.
- ΒελτίωσηΒελτίωση στην επικύρωση μετά από αποτυχία επικοινωνίας με το αυτοκίνητο (SLAC) και το σύστημα πληρωμών.
- ΒελτίωσηΣημαντική βελτίωση της αναφοράς σφαλμάτων ή deadletters στις διάφορες πλατφόρμες V2C.
- ΔιόρθωσηΟι φορτίσεις που διακόπτονται λόγω διακοπής ρεύματος κλείνουν και τιμολογούνται σωστά όταν επανέρχεται το ρεύμα.
- ΔιόρθωσηOCPP: Η ουρά μηνυμάτων OCPP δεν μπλοκάρει πλέον όταν ο διακομιστής απαντά με σφάλμα.
- ΔιόρθωσηOCPP: Εάν ο διακομιστής OCPP απορρίψει την έναρξη μιας συναλλαγής, η φόρτιση σταματά.
- ΔιόρθωσηOCPP: Η ελεύθερη λειτουργία μπορεί πλέον να απενεργοποιηθεί από το πάνελ του εγκαταστάτη.
Προηγούμενες εκδόσεις 9
-
- ΒελτίωσηΟι πληρωμές με κάρτα κλείνουν όταν το όχημα έχει αποσυνδεθεί πλήρως, έτσι ώστε το ποσό που χρεώνεται να αντιστοιχεί πάντα στην παρεχόμενη ενέργεια.
- ΒελτίωσηΠιο αξιόπιστες επανεκκινήσεις σε φορτιστές με κινητή συνδεσιμότητα (4G).
- ΔιόρθωσηΤα προφίλ έξυπνης φόρτισης με διάρκεια που αποστέλλονται μέσω OCPP εφαρμόζονται πλέον σωστά.
- ΔιόρθωσηΤα μηνύματα OCPP που εκκρεμούν για αποστολή δεν χάνονται πλέον κατά την ενημέρωση από προηγούμενη έκδοση.
- 1.0.5ΒελτίωσηΟ φορτιστής ξεκινά σωστά ακόμα και όταν δεν υπάρχει διαθέσιμη σύνδεση δικτύου.
-
- ΒελτίωσηΗ σύνδεση με την πλατφόρμα OCPP αποκαθίσταται αυτόματα μετά από σφάλμα δικτύου.
- ΒελτίωσηΟ αναγνώστης RFID ανακάμπτει μόνος του μετά από σφάλμα ανάγνωσης, χωρίς να χρειάζεται επανεκκίνηση του φορτιστή.
- ΔιόρθωσηΟι αλλαγές ρυθμίσεων μπορούσαν να σταματήσουν να εφαρμόζονται μετά από εσωτερικό σφάλμα. Τώρα εφαρμόζονται πάντα.
- ΔιόρθωσηΤο τερματικό πληρωμών δεν ξεκινά πλέον όταν είναι απενεργοποιημένο.
- 1.0.3ΔιόρθωσηΟ φορτιστής μπορούσε να σταματήσει να ανταποκρίνεται μετά από παρατεταμένη λειτουργία. Διορθώθηκε.
-
- ΒελτίωσηΗ διαμόρφωσή σας και τα κλειδιά OCPP διατηρούνται κατά την ενημέρωση του φορτιστή.
- ΒελτίωσηΕνημερώθηκε το firmware ελέγχου ισχύος, για πιο σταθερή και ακριβή φόρτιση.
- ΣυμβατότηταΤο Denka ενσωματώνεται στην ενοποιημένη πλατφόρμα της V2C και περνά στη νέα σειρά εκδόσεων 1.x, που αντικαθιστά τη σειρά 0.14.x.
- ΔιόρθωσηΣφάλματα κατά την έναρξη ή διακοπή μιας συνεδρίας φόρτισης μέσω OCPP.
- ΔιόρθωσηΟ φορτιστής δεν προσπαθεί πλέον να συνδεθεί στο cloud επ' αόριστον με ληγμένα διαπιστευτήρια.
- ΔιόρθωσηΟι κάρτες RFID με αριθμητικούς κωδικούς διαβάζονταν λανθασμένα.
- ΔιόρθωσηΟι ενημερώσεις μπορούσαν να αποτύχουν κατά τη μετάβαση από ορισμένες εκδόσεις.
-
- ΒελτίωσηΈξυπνη φόρτιση: ρυθμιστικό ισχύος στον πίνακα του εγκαταστάτη.
- ΒελτίωσηΓενικές βελτιώσεις στη σταθερότητα και αξιοπιστία του συστήματος.
- ΒελτίωσηΓενικές βελτιώσεις στη λειτουργία και τη σταθερότητα.
- ΔιόρθωσηΔιορθώσεις στη συμπεριφορά της έξυπνης φόρτισης OCPP.
- ΔιόρθωσηΔιόρθωση προβλημάτων στη διαχείριση και ανάκτηση συναγερμών του συστήματος.
-
- ΝέοΔιακοπή φόρτισης σε συγκεκριμένο SoC
- ΝέοΑναφορά κατάστασης του κουμπιού έκτακτης ανάγκης.
- ΝέοΣτοιχείο slider στο webserver.
- ΝέοΑναφορά του SoC του οχήματος και του πρωτοκόλλου στο backend.
- ΝέοΗ άμεση μέθοδος `currentcharge` επιστρέφει τώρα τον υπολειπόμενο χρόνο για το SoC bulk και πλήρες.
- ΝέοΆμεση μέθοδος για επανεκκίνηση της υπηρεσίας `autossh`.
- ΝέοΔιαμόρφωση της λειτουργίας IP (δημόσια/ιδιωτική) για τη σύνδεση 4G.
- ΒελτίωσηΈξυπνη φόρτιση OCPP.
- ΒελτίωσηΒελτιώσεις απόδοσης.
- ΒελτίωσηΕκκίνηση του WiFi module.
- ΒελτίωσηΜεταφορά του διακομιστή HTTP.
- ΔιόρθωσηΔιόρθωση σφαλμάτων στη ρύθμιση εκκίνησης.
- ΔιόρθωσηΔιόρθωση σφαλμάτων στη έξυπνη φόρτιση του OCPP.
- ΔιόρθωσηΔιόρθωση σφαλμάτων στον webserver και την επικοινωνία με το hardware.
-
- ΒελτίωσηΒελτίωση της απόδοσης αποστολής παραμέτρων DC.
- ΔιόρθωσηΔιορθώθηκε το μπλοκάρισμα του SPI.
- ΔιόρθωσηΣφάλμα στο `TimerHandler` με `n_connectors`.
-
- ΝέοΕνσωμάτωση αλλαγών στις αναφερόμενες ιδιότητες.
- ΝέοΡύθμιση της βαθμονόμησης RFID από τον πίνακα εγκατάστασης.
- ΝέοΕνσωμάτωση της παρατηρούμενης ιδιότητας της κοινής βιβλιοθήκης.
- ΝέοΔιακοπή φόρτισης σε συγκεκριμένο SoC.
- ΝέοΛευκή λίστα φόρτισης ανά MAC.
- ΔιόρθωσηΣφάλμα στο `TimerHandler` με `n_connectors`.
- ΔιόρθωσηΕπιδιόρθωση για την αύξηση των αποστελλόμενων μηνυμάτων.
Screen
Τρέχουσα έκδοση 2.20 · Εκδόσεις: 66, πρώτη: Μάρτιος 2022
- ΔιόρθωσηFixed rfid bug in ocpp.
Προηγούμενες εκδόσεις 65
- 2.19ΔιόρθωσηFixed rfid card issue in stop transactions.
- 2.18ΔιόρθωσηFixed OCPP error where transaction wasn't started when states passed from C to B to C.
- 2.17ΔιόρθωσηCB Master: Improved robustness of rfid charge track so that if one connector is fully charged and a different car wants to charge in the other connector it can now charge.
- 2.16ΔιόρθωσηCB Master: Fixed bug that wouldn't allow two connectors to charge with payment + RFID.
- 2.15ΝέοCB Master/CB N: Rfid cards can start a charge in payment mode if rfid is enabled.
- 2.14ΔιόρθωσηCB Master: We check if measurer is flipped by connector instead of globally.
- 2.13ΔιόρθωσηCB Master: We check if measurer is flipped while configuring meter values so that they are sent correctly.
-
- ΔιόρθωσηCB N: Fixed cloud iot problem.
- ΔιόρθωσηCB Master: Configuration file is restored correctly in the case it's lost. This provoked the page not found error.
- ΔιόρθωσηCB Master: Fixed bug where a connector couldn't start a charge when there's a car on the other connector with state B.
- 2.11ΔιόρθωσηCB Master: Meter power bug fix.
-
- ΝέοCB N: Car state management D and E.
- ΒελτίωσηCB N: General payment improvements.
- ΒελτίωσηCB N: In payment method, when you move from status c to b, it does not allow you to reload again until you start a new transaction.
- ΒελτίωσηCB N: Improved restart logic when any OCPP configuration is changed.
- ΒελτίωσηCB Master: General meter improvements.
- ΒελτίωσηPole: Filter to reduce number of logs.
- ΔιόρθωσηCB Master: Fixed payment bug that sent the upload permission to the wrong connector.
- ΔιόρθωσηCB Master: Fixed bug that when two cars were connected and the B connector was in B status, when the card was swiped, the B was set to charge when the A should be set.
- ΔιόρθωσηCB Master: Total energy bug arrangement from version using imported and exported energy.
-
- ΒελτίωσηCB Master: Meter restructuring.
- ΒελτίωσηOCPP: General improvements in Smart Charging and Tx Profile implemented.
- ΒελτίωσηOCPP: Changes due to restructuring of the meter.
- ΒελτίωσηOCPP: Restructuring of smart charging. Obtain composite timetable with several profiles.
-
- ΝέοCB Master: Integrated SACI meter and changes so that the serial configuration per connector is not linked.
- ΒελτίωσηCB Master: Increased RFID SPI communication speed and lowered RFID gain if noise is detected.
- ΒελτίωσηCB Master: Code refactoring
-
- ΝέοOCPP: Starting point for get composite schedule done.
- ΝέοOCPP: Relative profiles are handled but only for Smart Charge profiles where connector id is bigger than 0.
- ΝέοOCPP: Smart Charging Tx Profiles are now accepted.
- ΝέοOCPP: In websocket connection, added "compression=None" since without it it doesn't work on latest Steve version.
- ΒελτίωσηCB Master: Refactored serial and made some changes that improve flexibility. We can now have one connector with one type of measurer and the other connector with a different type of measurer.
- ΒελτίωσηOCPP: Added next time check mechanism for Smart Charging so we check the next time any limit changes instead of every 30 seconds.
- ΒελτίωσηOCPP: General Smart Charge improvements.
- ΔιόρθωσηCB Master: Convert to positive the negative values read by Phoenix Contact measurer.
- ΔιόρθωσηCB Master: Adjusted the precision of Phoenix Contact monophasic measurers.
- ΔιόρθωσηCB N: Fixed bug provoked by changing local load balancing from v2c service.
- ΔιόρθωσηOCPP: Change availability of Persistant Data handler is now async so that we can call it without blocking the execution of the ServerController.
- ΔιόρθωσηOCPP: Fixed clear charging profiles.
- ΔιόρθωσηOCPP: We handle decimal numbers on the Smart Charge profile's limit.
-
- ΝέοCB N: Changes due to Smart Charging
- ΝέοOCPP: Smart Charging starting point fininshed.
- ΝέοOCPP: Smart Charging configuration keys are handled.
- ΝέοOCPP: Smart Charging profiles can be added and will be validated and can also be deleted.
- ΔιόρθωσηOCPP, CB N and CB Master: Fixed bug when locked was modified and ocpp was activated but chargepoint isn't connected to any central system.
- ΔιόρθωσηCB Master: Fixed bug when OCPP charge is started where if connector 1 was charging, connector 0 couldn't start a charge.
- ΔιόρθωσηCB Master: Prevent crash in the case that .versions folder doesn't exist.
- ΔιόρθωσηCB Master: Register cards are now added to card cache.
-
- ΝέοPole: Screen now shows when user passes a non registered RFID card.
- ΒελτίωσηCB Master: Improvements in update process.
- ΒελτίωσηCB Master: Changes so that screen indicates when a non registered RFID card is passed.
- ΒελτίωσηCB N: Improvements in update process.
- ΒελτίωσηOCPP: GetConfigurationKeys now returns unknown keys and we handle SupportedFileTransferProtocols key.
- ΒελτίωσηPole: Romanian identifier moved to position 6 to maintain order language with Trydan.
-
- ΒελτίωσηCB Master: We store RFID cards in cache.
- ΒελτίωσηCB N: RFID reader improvements. Case where two connectors are plugged in and a card is passed.
- ΒελτίωσηCB N: New communication method so that CB master can obtain RFID cards.
- ΑφαίρεσηCB Master: We don't send wifi_info in report anymore and we have removed functions related to wifi_info.
- ΑφαίρεσηCB N: We don't send wifi_info in report anymore.
-
- ΝέοCB N: Static IP configuration through access point.
- ΒελτίωσηCB Master: Improvement in connect/disconnect logic. Disconnection is less rigid and we increased network check from 5 seconds to 15 seconds.
- ΒελτίωσηCB Master: Increased RFID reader antenna gain.
- ΒελτίωσηCB N: When charger reconnects, it will only send report if a property has changed.
- ΒελτίωσηCB N: Properties are now only reported when they have changed from previous value.
- ΔιόρθωσηCB Master: CWe fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- ΔιόρθωσηCB N: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- ΔιόρθωσηOCPP: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
-
- ΒελτίωσηCB Master: Safeguard so that it doesn't fail when there's a missing network card and we try to obtain data usage.
- ΒελτίωσηOCPP: Removed range validation from measurer.
- ΕνημέρωσηCB Master: Removed range validation from measurer for Carlo Gavazzi and Phoenix Contact measurers.
- ΔιόρθωσηCB Master: Fixed energy by hour bug.
-
- ΒελτίωσηCB N: We show in log if i2c reconnects.
-
- ΝέοCB Master: Chargebox Cache now stores state of connectivity with V2C service to show it on the screen.
- ΝέοCB N: Chargebox Cache now stores state of connectivity with V2C service.
- ΝέοPole: The screen now shows a cloud icon to indicate connectivity to our cloud.
- ΒελτίωσηCB Master: Adjustment in measurer so that it can handle int32 represented as uint.
- ΒελτίωσηCB N: Log improvements to not show get_has_internet_connection y and reduce error messages generated when i2c is not working.
- ΒελτίωσηCB N: Changes to reduce calls to has_internet_connection to consume less data.
- ΒελτίωσηOCPP: We log exception names since sometimes exception errors return empty string.
- ΒελτίωσηOCPP: We capture error if there's an error when sending heartbeat.
- ΒελτίωσηOCPP: We change client controller so that it's the same as CB N and CB Master.
- ΔιόρθωσηCB N: Seconds of timeout now return 0 instead of None if not set.
-
- ΒελτίωσηCB Master: Master now sends the balanced intensity when it changes.
- ΒελτίωσηCB N: Changed order of what happens when configuration is changed. We first update the value, then we report the changes to Azure and finally we set the cache.
- ΒελτίωσηCB N: CB Master now sends balanced intensity instead of CB N probing for change.
- ΔιόρθωσηCB Master: Fixed error where RFID stops charge while the other connector is enabled.
- ΔιόρθωσηCB Master: Fixed error where RFID card is passed and both connectors have a car plugged in.
- ΔιόρθωσηCB N: Fixed bug where changing local load balancing set both connector intensities to 16.
-
- ΒελτίωσηCB Master: Change in log system to not show repeated logs.
- ΒελτίωσηCB Master: Shared properties are now set in the other connector if they are different on startup.
- ΒελτίωσηCB Master: Completely decoupled OCPP from CB N and get_ocpp_config function fixed.
- ΒελτίωσηCB Master: Network state is now sent when changed instead of being probed every 30 seconds.
- ΒελτίωσηCB N: General improvements of communication between modules and cache.
- ΒελτίωσηCB N: Improved stability related with missing configuration.
- ΒελτίωσηCB N: Change in log system to not show repeated logs.
- ΒελτίωσηCB N: Fixed problem where Chargebox loop would destroy RFID state.
- ΒελτίωσηCB N: Fixed OCPP ConnectionTimeout.
- ΒελτίωσηCB N: Completely decoupled OCPP from CB N
- ΒελτίωσηCB N: Network state is now sent when changed instead of being probed every 30 seconds.
- ΒελτίωσηCB N: We only change repository hash if it's different than the current one.
- ΒελτίωσηCB N: Updating checks if charger is updated or not and only changes version after it has been updated.
- ΒελτίωσηCB N: General improvements of communication between modules.
- ΒελτίωσηOCPP: Improved Client Controller traceability.
-
- ΒελτίωσηCB Master: Created Cache to decrease the number of requests and communication between modules.
- ΒελτίωσηCB Master: Fixed network reset problem.
- ΒελτίωσηCB Master: Changes so that Pole can receive all the information it needs in one call.
- ΒελτίωσηCB Master: Changes dues to how the measures are now sent.
- ΒελτίωσηCB Master: General access point improvements.
- ΒελτίωσηCB Master: Improvements due to changes in module communication.
- ΒελτίωσηCB N: Created singletons are now thread safe.
- ΒελτίωσηCB N: Server Controller is now executed sooner due to being fundamental in correct functioning.
- ΒελτίωσηCB N: Changes to take into account CB Master's cache
- ΒελτίωσηCB N: Changed way we obtain measures to perform less requests with Client Controller.
- ΒελτίωσηCB N: Improvements due to changes in module communication.
- ΒελτίωσηOCPP: Created singletons are now thread safe.
- ΒελτίωσηOCPP: Completely decoupled from CB N and now only communicates with CB Master.
- ΒελτίωσηOCPP: Simplified communication between modules.
- ΒελτίωσηOCPP: Improvements due to changes in module communication.
- ΒελτίωσηPole: Created singletons are now thread safe.
- ΒελτίωσηPole: Completely decoupled CB N and we obtain all information needed in one call to CB Master.
- ΒελτίωσηPole: Improvements due to changes in module communication.
-
- ΒελτίωσηCB Master: The charger now limits the number of messages that appear in the case that there's a range validation fail of a measure.
- ΒελτίωσηCB N: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- ΒελτίωσηCB N: Restart Server Controller mechanism.
- ΒελτίωσηOCPP: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- ΒελτίωσηOCPP: Restart async Server Controller mechanism.
- ΒελτίωσηPole: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- ΔιόρθωσηOCPP: If there's an error handling a request, we won't add it to the offline queue.
- ΔιόρθωσηOCPP: Include thread and sys libraries.
-
- ΒελτίωσηCB N: When rebooting, we check module communication server.
- ΒελτίωσηCB N: Decoupled concept of connector id and measurer address.
- ΒελτίωσηCB Master: When rebooting, we check module communication server.
- ΒελτίωσηCB Master: Decoupled concept of connector id and measurer address.
- ΒελτίωσηCB Master: Fixed error in Phoenix Contact measurer.
- ΒελτίωσηPole: ZMQ integrated to improve communication.
-
- ΒελτίωσηPole: Improvement to let the user know when to connect the vehicle.
- ΒελτίωσηPole: Screen now reflects if charger has only one connector.
- ΒελτίωσηCB Master: Changed SSID format so that it's the same as Trydan's format.
-
- ΒελτίωσηOCPP: Added measurer range validation.
- ΒελτίωσηCB Master: Added measurer range validation.
- ΕνημέρωσηOCPP: AuthorizeRemoteTxRequests is now a read and write configuration key.
- ΔιόρθωσηOCPP: Fixed problem with repeated logs.
- ΔιόρθωσηCB Master: Fixed problem with repeated logs.
- ΔιόρθωσηCB N: Fixed problem with repeated logs.
-
- ΒελτίωσηCB N: Handled special case of change intensity.
-
- ΝέοCB Master: Access point logic fininshed.
- ΝέοOCPP: Data validation when configuration is changed.
- ΝέοOCPP: Charger can now handle multiple transactions offline.
- ΒελτίωσηCB N: If OCPP is on, we disable payment mode.
-
- ΒελτίωσηOCPP: Reset function improved. Corresponding Status Notification is sent.
-
- ΒελτίωσηCB N: General stability improvements.
- ΒελτίωσηCB N: Changed payment method approach.
- ΒελτίωσηCB Master: Changed payment method approach.
- ΒελτίωσηCB Master: Improved robustness in the case the access point software is not installed.
- ΒελτίωσηPole: Improvements due to payment method.
-
- ΝέοOCPP: Change availability validates connector.
- ΝέοCB Master: Finished Access point.
- ΒελτίωσηCB Master: Changed compressed file formats from gzip to gz
- ΒελτίωσηCB Master: Force backup when restarting.
-
- ΝέοCB N: Allow to change intensity, when i2c is failing.
- ΝέοCB Master: Implemented most of the access point server functionalities.
- ΔιόρθωσηCB Master: Fixed OCPP measurer error that ocurred when all selected measures in Meter Values returned 0.
- 1.4.3ΝέοCB Master: Initial version of the access point server.
-
- ΒελτίωσηCB N: Changes to improve Pole software.
- ΒελτίωσηPole: Changes to simplify view logic.
- ΔιόρθωσηCB Master: If payment mode is active, charger won't allow to charge with RFID card.
- ΔιόρθωσηPole: Removed sourceMappingUrl to prevent 404 error when there's no internet.
- 1.4.1ΔιόρθωσηCB N: Payment mode changed since payload format for server has changed.
- 1.4.0ΝέοPole: Changes in screen software that reflects payment mode, blocking connectors and OCPP.
-
- ΔιόρθωσηOCPP: Charger won't send Authorize if passed RFID card is already used in a transaction.
- 1.3.23ΒελτίωσηOCPP: We store RFID cards in lower caps to improve robustness.
-
- ΒελτίωσηOCPP: Improved robustness of RFID cards stored in the Local Authorization list.
-
- ΒελτίωσηOCPP: Improved Local Authorization logic.
-
- ΔιόρθωσηCB Master: Fixed wifilist sending format.
-
- ΝέοCB N: We report information regarding wifi_info. Direct method to ask for the SSIDs the raspberry pi detects.
- 1.3.18ΒελτίωσηOCPP: Improved authorization cache handler.
-
- ΒελτίωσηOCPP: Improved handling of measurer values.
-
- ΒελτίωσηOCPP: Improved handling of configuration keys.
-
- ΕνημέρωσηCB N: Payment mode with duration and timers.
-
- ΒελτίωσηOCPP: Improved MeterValues handler.
- 1.3.13ΝέοOCPP: Finished Local Authorization List profile.
- 1.3.12ΒελτίωσηOCPP: Log Improvements.
- 1.3.11ΔιόρθωσηOCPP: Fixed bug that wouldn't send Authorize Request when passing the RFID card.
-
- ΝέοOCPP: Basic implementation of OCPP profiles: FirmwareManagement, LocalAuthListManagement, Reservation and SmartCharging.
- 1.3.9ΒελτίωσηCB Master: Fixed RFID card reading with Wiegand reader for cards that have a 0 on the left side. Example of cards that failed: 32:0a:2c:23, 41:00:32:12.
-
- ΕνημέρωσηOCPP: Availability isn't managed by OCPP anymore. It is handled exclusively by property locked.
- 1.3.7ΒελτίωσηCB N: If charger is blocked, led blinks won't be sent.
- 1.3.6ΝέοCB N: Payment Mode finished with start and stop.
- 1.3.5ΒελτίωσηOCPP: Clear Cache can only be performed when all connectors are in the OCPP state Available.
-
- ΒελτίωσηOCPP: Changes so that availability can be changed from CB N.
-
- ΒελτίωσηCB Master: OCPP module can now ask for Status Notification.
- ΕνημέρωσηOCPP: The charger the different possible OCPP states in the Status Notification.
- 1.3.2ΒελτίωσηOCPP: We can now set configuration parameters for safeguard.
- 1.3.1ΒελτίωσηOCPP: Change availability is now completely functional. It changes to inoperative during a charge and availability changes the locked value.
- 1.3.0ΔιόρθωσηOCPP: Changed way we obtain measurer data for OCPP.
- 1.2.0ΔιόρθωσηOCPP: Temporary fix for Place to plug since OCPP library can't handle unknown keys.
- 1.1.0ΔιόρθωσηOCPP: Fixed _available_connectors error.
-
- ΝέοOCPP.
- ΝέοScreen.
- ΝέοPole.
- ΝέοCB Master.
- ΝέοCB N.
Εφαρμογή V2C Cloud
Τρέχουσα έκδοση 3.3.2 · Εκδόσεις: 30, πρώτη: Φεβρουάριος 2023
- ΝέοNew dark mode built into the app: all screens adapt correctly to the dark mode of your phone.
- ΝέοNew appearance screen (Settings > User data > Appearance) to choose between Automatic mode (follows the phone), Light or Dark.
- ΝέοNew QR and barcode reader, faster and more reliable, to identify the e-Charger in Payments and during pairing.
- ΝέοClearer error messages when signing in incorrectly.
- ΒελτίωσηCleaner app startup, without the initial white flash.
- ΒελτίωσηFixed double margins and grey bars on Android 14 and earlier when leaving and returning to the application.
- ΒελτίωσηLighter app: significant reduction in its size thanks to image and code optimization on Android.
- ΣυμβατότηταThe app now requires Android 8.0 or later.
- Ενημέρωση"No injection or isolated" mode in charging profiles: the minimum power becomes 300 W, since a lower battery discharge is insufficient, with a warning if a lower value is entered.
- ΔιόρθωσηFixed an issue where newly created charging profiles could disappear when refreshing the main screen.
- ΔιόρθωσηFixed the scheduled charging modal (Classic and EcoCharging), which now adjusts to display all its content without needing to scroll.
Προηγούμενες εκδόσεις 29
-
- ΝέοNew V2C in-house notification system, more reliable, and request for notification permission in recent versions of Android.
- ΝέοNew languages available: Polish, Lithuanian, Simplified Chinese and Czech.
- ΝέοNew favorite e-Chargers list in Payments: save your usual e-Chargers under any name you like to start charging in a single step.
- ΝέοThe V2C e-Chargers shown on the map already allow you to start charging directly through V2C Payments.
- ΝέοYou can filter the map by V2C e-Chargers.
- ΝέοNew compatible inverters for dynamic control: SolPlanet, Hoymiles and Huawei with direct WiFi connection (available for Trydan version 2.5.2 or higher).
- ΝέοHome battery management extended to more inverters: Sigenergy (from version 2.5.1), and GoodWe, SolarEdge and SolPlanet (from version 2.5.2).
- ΝέοNew alert on Pole Pro when the cable meter does not respond (Error 3), available from version 6.1.0.
- ΝέοNew explanation of how mixed charging mode works in Special options.
- ΝέοThe main screen now shows the name of the charging profile in use.
- ΝέοThe statistics now correctly show negative costs.
- ΝέοThe virtual assistant button can be docked to the side of the screen and restored whenever it is needed.
- ΝέοNew explanatory message when sharing an e-Charger with an email address that does not have a V2C account.
- ΝέοVisual improvements across the entire application: system bars, top margins and adaptation to different mobile device models.
- ΒελτίωσηFaster app startup and lower resource consumption.
- ΒελτίωσηNew date picker design for the global statistics and for each e-Charger.
- ΒελτίωσηImproved Bluetooth connection stability, preventing freezes when connecting, when checking the power settings and when opening the e-Charger options.
- ΒελτίωσηGreater session stability: unexpected logouts are avoided after keeping the app in the background for a long time, and lock-ups when signing in on iPhone are prevented.
- ΒελτίωσηPole Pro network configuration, now more secure: validation of the WiFi network and static IP, the APN does not accept accents, and the presentation of the 4G SIM card has been improved.
- ΒελτίωσηCorrections to tariff names and tariff display, plus new colors to better distinguish periods when editing the electricity tariff.
- ΒελτίωσηInternal optimization to reduce the size of the application.
- ΕνημέρωσηV2C Payments: now only the e-Charger administrator can activate it, and when doing so, the location of the charging point is selected.
- ΕνημέρωσηV2C Payments: new warning before continuing if the e-Charger has no Internet connection or does not allow charging at that time.
- ΕνημέρωσηThe charging priority between the car and the battery is only shown when the installation includes an inverter or the Huawei EMMA meter.
- ΕνημέρωσηCompatibility with the new language format in the latest firmware versions of the e-Chargers.
- ΔιόρθωσηFixed the statistics list on iPhone, which could appear cut off.
- ΔιόρθωσηCorrected the minimum power displayed when it is below 1 kW on Denka.
- ΔιόρθωσηFixed an internet connection warning that was being displayed without cause.
- ΔιόρθωσηFixed an error when selecting car models whose name contains the # symbol.
- ΑφαίρεσηThe app no longer requests background location permission, as it is no longer necessary.
-
- ΝέοImprovements to V2C Assistant: a new information screen to better explain how the assistant works.
- ΝέοImprovements in Dynamic Control: Shelly Pro devices are also compatible with V3.
- ΝέοImprovements to battery configuration: the interface of the option that prevents the charger from discharging the home battery has been improved, making its operation clearer.
- ΝέοNew compatibility with Sigenergy: added Sigenergy as a compatible inverter for battery control in the charging profiles.
- ΝέοNew Solarman inverter discovery: added a system to automatically detect available Solarman devices during setup in Dynamic Control.
- ΝέοSolarman discovery via Bluetooth and Wi-Fi: the new system lets you perform discovery using the available connections.
- ΝέοImprovements to Solarman configuration: discovered devices are now displayed individually to make them easier to select and configure.
- ΒελτίωσηImprovements to scheduled charging: optimized the operation of the time indicator during scheduled charging sessions.
- ΒελτίωσηNew error handling: improved the behavior of certain app calls when status errors occur.
- ΒελτίωσηImprovements in Oasys: optimized data persistence to correctly retain configuration settings.
- ΒελτίωσηImprovements to AutoCharge management: updated the name and presentation of the AutoCharge feature.
- ΒελτίωσηImprovements to sharing: additional information added to the sharing screen to make it easier to understand.
- ΒελτίωσηVisual improvements in the Solarman discovery flow: improved states, animations, messages and confirmations during the search process.
- ΒελτίωσηGeneral improvements: the application has been optimized and various bugs have been fixed to deliver a more stable experience.
- ΕνημέρωσηImprovements to charging profiles: maximum configurable power increased to 12 kW for single-phase installations and 36 kW for three-phase installations to make configuration easier for French users.
- ΕνημέρωσηNew support area: access to the support area has been updated.
- ΔιόρθωσηImprovements to charger sharing: fixed an issue that could cause errors when sharing a charger.
- ΔιόρθωσηMap improvements: Added token and updated the access used for the maps to ensure their correct operation.
- ΔιόρθωσηImprovements to inverter configuration: fixed several cases related to the configuration and validation of connection parameters.
- ΔιόρθωσηStability improvements: several issues detected during the final review have been fixed, such as the change of Charging type in special options not being performed correctly via Bluetooth.
-
- ΝέοNew password for OCPP in the advanced options for a more secure configuration.
- ΝέοNew notice when location permission is not granted, to make device setup easier.
- ΝέοNew reminder in the chatbot to allow movement when necessary.
- ΝέοImproved authentication stability, preventing simultaneous token requests and enhancing internal token management.
- ΝέοA safety timeout has been added when obtaining the token to prevent blocking in exceptional cases.
- ΝέοNew Sigenergy configuration guide via Modbus TCP to simplify commissioning of the inverter.
- ΝέοNew link to the Sigenergy setup guide when selecting this inverter in dynamic power control.
- ΝέοCompatibility with Sigenergy in dynamic power control, correctly identifying it as an inverter.
- ΝέοNew compatible models of Azzurro and SofarSolar inverters.
- ΝέοNew notice to restart the Alva when necessary to complete the configuration correctly.
- ΝέοMore precise Bluetooth error messages when it is not possible to connect to the charger.
- ΝέοNew Ingeteam inverter models and validation of connection data to simplify their configuration.
- ΝέοSelection of charging type available in Special options (Available for Trydan version 2.5.0 or higher).
- ΒελτίωσηImprovements to the Bluetooth connection of the Alva, with faster and more stable communication.
- ΒελτίωσηThe chatbot now offers more useful recommendations, with questions tailored to your setup and situation.
- ΒελτίωσηImprovements to smartphone configuration and translation of the texts related to pairing.
- ΒελτίωσηImprovements to the Dutch translations to deliver a more consistent experience.
- ΒελτίωσηGreater control over sending statistics when retrieving them via Bluetooth, preventing issues when the data is corrupted or incomplete.
- ΒελτίωσηInternal optimization of the app to reduce its size and improve compatibility with the latest Android recommendations.
- ΒελτίωσηImproved sensitivity of the charging profiles to avoid changing the segment when clicking.
- ΒελτίωσηImprovement to adjust charging profile times with precision, if desired.
- ΒελτίωσηImproved management of the dynamic control data for the Alva, correcting errors during its query.
- ΒελτίωσηGreater robustness when synchronising the time via Bluetooth on the Trydan.
- ΕνημέρωσηThe battery charging priority message in the charging profiles has been updated to make it clearer.
- ΔιόρθωσηImproved precision on some sliders, fixing data submission when they are clicked directly.
- ΔιόρθωσηFix for an empty card in the special options.
-
- ΝέοShow prioritising household battery charging in the charging profiles (version 2.5.0 or higher).
- ΝέοAdd detailed information on battery priority in charging profiles.
- ΝέοAdded EMMA as a compatible inverter to prevent battery discharge.
- ΝέοIdle fee added in Payments.
- ΝέοAdded COM address to the EMMA meter.
- ΝέοConnection type sent to ALVA.
- ΔιόρθωσηFixed a bug when opening the pop-ups.
-
- ΝέοAdded integrated AI chatbot.
- ΝέοAdded charging session completion log under Special options for Trydans (firmware version 2.5.0 or later).
- ΝέοAdded new custom tariff by time periods.
- ΝέοOasys chart data displayed as on the website.
- ΝέοAdded new "Battery level" field to the Oasys chart.
- ΝέοAdded a search feature for when a user has many chargers (more than 10).
- ΝέοPagination for retrieving large quantities of cards and eKeys via Bluetooth.
- ΝέοThe maximum charging current limit message for the connectors on Alvas will be 640A because they have two sockets.
- ΝέοImprovements to the RFID design, pagination, search engine and differentiation by type.
- ΝέοDisplay the version number the firmware will be updated to.
- ΝέοChecking whether Bluetooth permission is enabled and notifying the user.
- ΝέοLimited-current message on the screen for 16-ampere models.
- ΝέοChint available by version for Denka and Pole chargers.
- ΝέοNew GIF added to show battery discharge and photovoltaic production.
- ΒελτίωσηNew and improved UX for charging profiles.
- ΒελτίωσηImproved UX for the Energy Tariff screen, for custom tariffs.
- ΒελτίωσηImprovements and optimization of calls made during a Payments transaction.
- ΒελτίωσηGeneral Bluetooth improvements.
- ΒελτίωσηImproved design of the User Management screen and the option for the administrator to remove the charger from there.
- ΒελτίωσηMaximum charging current limited for the connectors and improved user experience.
- ΔιόρθωσηAvoid negative values in Oasys charts.
- ΔιόρθωσηFixed inconsistent colours in the Oasys charts.
- ΔιόρθωσηImproved UX of the password change button to prevent multiple clicks.
- ΔιόρθωσηFaster app startup when accessed without network coverage.
-
- ΝέοBattery discharge management notice for Ingeteam in its external application.
- ΝέοThe administrator can see whether the charger is being managed by an installer. Other users can see who the administrator is.
- ΝέοNew label in the capacity data.
- ΝέοDetailed explanations have been added to all the battery fields.
- ΝέοUpdate to version 2.5.0 to include compatibility with battery discharge.
- ΝέοSafety alerts have been added to warn the user to be careful when pressing certain sensitive functions.
- ΝέοGrid management has been added to the Oasys settings.
- ΒελτίωσηImprovement across all Oasys screens
- ΒελτίωσηImprovements in the app (v2c): The energy tariff has been added to Oasys.
- ΕνημέρωσηValidation of RFID and eKey length (at least 3 characters).
- ΕνημέρωσηThe Ingeteam and EMMA inverters have been removed from the list of compatible inverters for battery discharge.
- ΔιόρθωσηThe fix addressed an error when displaying the message "Evitar descarga de batería".
- ΔιόρθωσηFixed an error when saving the settings with the Goodwe inverter.
- ΔιόρθωσηFixed an error where the main method kept running in a loop even after leaving the screen.
- ΔιόρθωσηThe power limit issue on Denka has been resolved (hidden, but completed).
- ΔιόρθωσηCharging current has been permanently hidden on the payment screen.
- ΔιόρθωσηA possible security vulnerability has been resolved.
-
- ΝέοThere is a charge in progress indicated in the statistics.
- ΝέοNow the names of the RFID cards appear in the statistics.
- ΝέοFinished main battery screens with real data.
- ΝέοAdded checkbox to prevent battery discharge from version 2.4.7 onwards for some inverters
- ΒελτίωσηGreater robustness in the firmware update display (The update option will only appear if the current version is strictly lower than the latest stable version in production).
- ΕνημέρωσηAllow editors to modify the energy tariff.
- ΔιόρθωσηFixed error in the GIF without FV.
-
- ΝέοSeparation of Azurro and Sofar Solar inverters.
- ΝέοPrevention of overly long codes in RFID or eKeys and improvement of the user experience.
- ΝέοNew Azurro inverter.
- ΝέοImproved fluency in the map menus.
- ΝέοIncreased modal size to improve data display.
- ΝέοNew improved statistics design.
- ΝέοAdded new Huawei EMMA meter.
- ΝέοInverter type renamed to Sunny SMA.
- ΝέοAdded vehicle registration plate.
- ΝέοAdded the type of solar PV energy used in your charging profiles at each moment in the GIF
- ΝέοPagination completed for RFID on Denka and Pole Pro
- ΝέοNew Fronius types limited to versions above 2.4.2
- ΒελτίωσηImproved display of electric vehicle details.
- ΒελτίωσηImprovement in the Italian translations.
- ΒελτίωσηGeneral translation improvement.
- ΒελτίωσηUsability improvements and repositioning of buttons in EcoCharging
- ΒελτίωσηImprovement in Payments data sampling
- ΔιόρθωσηFixed the autocharge status check (it should not be performed in that case).
- ΔιόρθωσηFixed an error in the electric vehicle data.
- ΔιόρθωσηToken endpoint update across the entire app.
- ΔιόρθωσηFixed an error on the options screen with MAC addresses on Poles.
- ΔιόρθωσηImproved compatibility with large-screen devices.
- ΔιόρθωσηiOS safe-area settings.
- ΔιόρθωσηFixed an end-to-end issue on Android 15.
- ΔιόρθωσηUpdating end-to-end obsolete APIs.
- ΔιόρθωσηAdded safe areas to avoid overlaps with system bars.
- ΔιόρθωσηCritical security vulnerability fixed in Android.
- ΔιόρθωσηHidden charge target if the version doesn't include the required update (2.4.3)
- ΔιόρθωσηFixed a bug when trying to update firmware over local Wi-Fi.
-
- ΝέοAdded information on the cost during charging for users with photovoltaic systems.
- ΝέοMapbox token change for map search.
- ΒελτίωσηBluetooth connection acceleration.
- ΒελτίωσηImproved design of the BLE pairing.
- ΒελτίωσηRefactoring
- ΒελτίωσηBluetooth connectivity optimization on iOS.
- ΒελτίωσηContextual translation improvements across all languages.
- ΕνημέρωσηChange in the location of the V2C Business Panel, now in the main settings.
- ΔιόρθωσηFixed a bug when configuring V2C Business Panel.
- ΔιόρθωσηFixed a bug in the charge target checkbox.
- ΔιόρθωσηFixed a bug on the RFID/eKeys screen for the Alva units.
- ΔιόρθωσηFixed a bug where the map menus overlapped the notch on iPhones.
- ΑφαίρεσηSecondary unit update hidden
-
- ΝέοFinished and fully functional widget on Android and iOS.
- ΝέοAdded AI chatbot for frequently asked questions.
- ΝέοExplanation and notice for the Linky meter.
- ΝέοNew protocols for Goodwe inverter.
- ΝέοNew links for the new "Informational videos".
- ΝέοNew screen for pairing chargers via Bluetooth proximity.
- ΝέοNew screen to configure the time zone.
- ΝέοAdded Alva to the model lineup
- ΝέοNew option to link your e-Charger with a company.
- ΝέοTwo new subtypes for the Fronius inverter.
- ΝέοNew tariff for France: EDF Tempo
- ΒελτίωσηBest UX design for classic scheduled charging.
- ΒελτίωσηImproved data transmission and alerts for dynamic power control.
- ΒελτίωσηRefactoring of part of the code.
- ΒελτίωσηImprovement of some incorrect labels in all languages.
- ΒελτίωσηImproved the display of the emergency button pressed alert on Denkas.
- ΒελτίωσηImproved display of more specific errors when sharing a charger.
- ΕνημέρωσηLibrary updates on iOS.
- ΕνημέρωσηNew design for adding information about your electric vehicle
- ΔιόρθωσηStatistics use the start date as the reference, so that they appear within a given time interval.
- ΔιόρθωσηFixed a bug when entering an empty SSID on Poles and on iOS.
- ΔιόρθωσηGerman translations corrected.
- ΔιόρθωσηFixed the map bug on iPhones.
- ΔιόρθωσηFixed a bug in the display of costs in the statistics.
-
- ΝέοAdded alert for emergency button activated on Denka.
- ΝέοAutocharge feature: List of authorized vehicles for Denka.
- ΝέοNew flow in the photovoltaic diagram.
- ΝέοShare charger directly via email.
- ΝέοImprovement in the logs for uploading statistics manually.
- ΒελτίωσηImprovement of the charging skeleton on the home screen
- ΒελτίωσηBetter explanation of current per phase
- ΒελτίωσηImprovement of Italian translations
- ΒελτίωσηRemoved orientation restriction for greater compatibility with some tablets
- ΕνημέρωσηLibrary update
- ΕνημέρωσηFirebase library updated for greater security.
- ΕνημέρωσηCorrect order of the static IP configuration properties.
- ΔιόρθωσηBug fix when updating EcoCharging with a specific time.
-
- ΝέοAdded G2 type to the Goodwe inverter
- ΝέοAdded charging limit on Denka units
- ΝέοBattery capacity display on Denka.
- ΝέοRemaining charging time on Denka
- ΒελτίωσηMore space in the bottom menu for some devices
- ΒελτίωσηImproved bottom menu view for users with very large font sizes
- ΕνημέρωσηChanges to the Solis inverter type
- ΕνημέρωσηChange in the statistics sample: I now take endCharge into account, as the server does.
- ΕνημέρωσηChanges to server calls, without the trailing slash
- Ενημέρωση"Wake-up mode" hidden
- ΕνημέρωσηHidden 'Common registers' type on DEYE inverter
- ΕνημέρωσηGPS is not an essential requirement to download the App.
- ΕνημέρωσηIt is no longer necessary to specify the user's area in the electric vehicle settings.
- ΔιόρθωσηFixed a bug when retrieving data in Special Options
- ΔιόρθωσηMinor bug fixes
-
- ΝέοAllow SIM card data to be recharged without the e-Charger connected
- ΝέοNew warning messages for sensitive functions
- Βελτίωση"Overall stability improvement"
- ΕνημέρωσηChange of the property name to term_resistor
- ΔιόρθωσηThe bottom menu no longer overlaps the information
-
- ΒελτίωσηTotal improvement of Portuguese translations
- ΒελτίωσηTotal improvement of French translations
- ΒελτίωσηPartial improvement of German translations
- ΔιόρθωσηFixed a bug when changing the power on Denka units.
- ΔιόρθωσηBetter error handling on the map
-
- ΝέοPhase map adapted for Trydan
- ΝέοAllow secondary chargers to change the maximum and minimum current
- ΝέοAccess restriction to charging profiles for non-master chargers, and separation of current limits
- ΝέοChange and notice for DEYE inverter types
- ΝέοAdded BUS termination resistor view to dynamic control
- ΝέοImproved data loading on the network screen
- ΝέοLocal load balancing for Trydan, show BUS termination resistor status
- ΝέοImproved robustness in sending statistics over Bluetooth
- ΝέοNew home screen (splash screen) configured and optimized
- ΝέοImproved app restart without fully closing it; new finished designs with customizable background screen
- ΝέοNew logic on the device's home screen
- ΝέοNew data upload design on the home screen
- ΝέοFinished supplier filter
- ΝέοAdded skeletons (modern data loading) on the main screens
- ΝέοNew server calls, transaction grouping and pagination
- ΝέοNew server calls: listing and downloading invoices by type
- ΝέοAdded a clock next to the time in statistics, changed € to a generic currency symbol, and the statistics list now appears under general statistics.
- ΝέοNew DEYE type and added new Linky meter
- ΝέοApp translated into Basque and refactored to make it easier to add new languages
- ΝέοNew energy tariffs added
- ΝέοAdded new screen to confirm free payments
- ΝέοAdded another type for the Goodwe inverter
- ΝέοWarning in the e-Charger restart message
- ΝέοNew tariffs calculate their price correctly on the charging screen
- ΒελτίωσηDesign improvements and enhancements across all iPhone screens with Dynamic Island
- ΒελτίωσηImprovements to the statistics display
- ΒελτίωσηImproved the display of statistics over long time ranges
- ΒελτίωσηImprovement in the skeletons
- ΒελτίωσηInverters and meters, sorted alphabetically
- ΒελτίωσηCompetitive EcoCharging savings price and the ability to resume from any state
- ΒελτίωσηEnhancements to the device's main screen
- ΒελτίωσηImprovements in LetMeCharge
- ΕνημέρωσηRefactoring of the main screens
- ΕνημέρωσηSending the battery capacity as a number instead of a text string
- ΕνημέρωσηChanged server calls to the new transactions
- ΔιόρθωσηHide Modification Type Portugal
- ΔιόρθωσηFixed current limits on the main screen and redesigned/refactored the settings screen
- ΔιόρθωσηFixed the numeric input type on some inputs that allowed text entry.
- ΔιόρθωσηFixed a bug when selecting charging profiles: it always started on "weekdays".
- ΔιόρθωσηFixed a bug in the photovoltaic GIF.
- ΔιόρθωσηFix in the token refresh
- ΔιόρθωσηFixed a bug when displaying the firmware version
- ΔιόρθωσηFixed a bug when changing the cache
- Διόρθωση"Do not show the lock if the charger is not connected (Wi-Fi or Bluetooth) and fixed a bug when displaying the power level"
- ΔιόρθωσηAvoid screen lock due to internet connection in statistics
- ΔιόρθωσηFixed a bug when displaying statistics
- ΔιόρθωσηFixed bug in dynamic control, undefined IP
- ΔιόρθωσηFixed minor bugs
- ΑφαίρεσηRemoval of unused screens
- ΑφαίρεσηRemoved the card borders
- ΑφαίρεσηRemoved unnecessary elements
- ΑφαίρεσηRemoved the current limit per phase when the charger is single-phase
-
- ΝέοNew permissions and restrictions based on e-Charger model and user role
- ΝέοMaximum and minimum power limit on Denka
- ΝέοAnimation without chargers adapted to the new design
- ΝέοNew dynamic control for Trydans with version higher than 2.3.0
- ΝέοAdded map (Coming very soon)
- ΝέοNew design with bottom menu
- ΒελτίωσηCode refactoring for better maintainability
- ΒελτίωσηImproved reconnection between main screens
-
- ΕνημέρωσηiOS SDK update to allow publishing.
- ΔιόρθωσηFixed a bug in the creation of the EcoCharging plan.
- ΔιόρθωσηFixed font size on some screens.
- ΔιόρθωσηFixed a bug when selecting static control on the Pole Pro.
- ΔιόρθωσηFixed a bug when requesting location on Android 14.
- ΑφαίρεσηFull removal of the load-balancing app between sockets (it is now included in the dynamic control operation).
-
- ΝέοSerial number added to the Enphase inverter.
- ΝέοStats chart added in EcoCharging.
- ΝέοRefactoring of the application and new way of displaying dynamic control according to the version and model of the e-Charger.
- ΝέοAddition of Italian language to Pole Pro.
- ΝέοCo-owners can edit their credit card.
- ΝέοDo not allow configuring charging profiles on a device that is not the Master.
- ΒελτίωσηEnhanced Bluetooth calls for Pole Pro.
- ΒελτίωσηImproved robustness when retrieving statistics via Bluetooth.
- ΒελτίωσηServer Call Refactoring.
- ΒελτίωσηTranslation improvements.
- ΒελτίωσηGreater robustness when changing a scheduled charge.
- ΒελτίωσηPerformance improvement at application startup.
- ΒελτίωσηImprovements to the connection setup screen.
- ΔιόρθωσηFixed the invoice PDF download.
- ΔιόρθωσηFixed a blank screen error when configuring the connection.
- ΔιόρθωσηFixed error when updating via local Wi-Fi.
- ΔιόρθωσηInconsistency fixed with OCPP: it appeared as enabled when it was not enabled via Bluetooth.
- ΔιόρθωσηError fixed when displaying cost in charts with photovoltaic energy statistics.
- ΑφαίρεσηElimination of load balancing between sockets on Poles; it now balances automatically through dynamic power control.
-
- ΝέοAllow deleting e-Charger if Cloud Dynamic Control is enabled and you are not the Administrator
- ΒελτίωσηAvoid excessive calls on the main screen with multiple e-Chargers
- ΒελτίωσηTroubleshooting errors when editing RFID cards or Bluetooth key fobs
- ΕνημέρωσηUpdate the Denka's minimum current to 1kW
- ΕνημέρωσηLibrary updates and performance optimisation
- ΕνημέρωσηAllow power levels above 100 kW in charging profiles
- ΔιόρθωσηFixed a bug when uploading statistics via Bluetooth.
- ΔιόρθωσηFixed a bug when retrieving data from Shelly Pro in dynamic control
- ΔιόρθωσηFixed a bug when adding the first charging profile via Bluetooth
- ΔιόρθωσηFixed a bug when downloading invoices on any mobile device
- ΔιόρθωσηFixed white screen bug when adding a Pole
-
- ΝέοNew feature: added "Wake-up mode".
- ΝέοTurn off notifications when you log out.
- ΒελτίωσηImprovement in optimization, higher speed.
- ΔιόρθωσηFixed a bug when retrieving statistics via Bluetooth with photovoltaic discrimination.
- ΔιόρθωσηFixed a bug when updating the reported property when changes are made to a property.
-
- ΝέοStatistics show the cost with solar PV applied, and savings are also displayed.
- ΝέοOption to change the LED brightness
- ΝέοAbility to set a different COM address for the DDSU666-H meter
- ΝέοAdded Fronius inverter types
- ΝέοNew e-Charger Denka added
- ΝέοNew tariffs added (Indexed and OMIE)
- ΝέοNew properties of the Denka e-Charger added
- ΝέοNew inverters added
- ΝέοActivated EcoCharging alert
- ΝέοAdded EcoCharging plan view
- ΝέοDenka feature integration
- ΝέοNow notifications are differentiated by type and can be selected according to the user's preference.
- ΝέοTranslations of all new screens.
- ΝέοSome options are disabled when cloud dynamic control is enabled.
- ΝέοWarning message when changing the OCPP settings.
- ΝέοAdded Deye inverter types to dynamic control
- ΝέοAdded date filter to transactions.
- ΝέοAdded new Shelly pro meter to dynamic power control
- ΒελτίωσηImproved French translations.
- ΕνημέρωσηFirmware update to version 2.2.7
- ΕνημέρωσηEmail verification submission form updated
- ΕνημέρωσηText changes for 4G and Ethernet.
- ΔιόρθωσηFixed the error when displaying battery charging in the GIF.
- ΔιόρθωσηFixed a bug on the RFID screen that would get stuck, loading indefinitely.
- ΔιόρθωσηChanged the text on monthly invoices and fixed the default month on invoices.
- ΔιόρθωσηFixed error when the server fails to request the MAC, and when the JSON fails to request the reported value via Bluetooth.
-
- ΒελτίωσηTranslation improvements
- Διόρθωση"Fixed the issue with the time change when editing hours in charging profiles"
-
- ΝέοAdded the types for the Greenheiss inverter and the SAJ inverter.
- ΝέοAdded an ion-range to the power selection of the charging profiles
- ΝέοNew connectivity options for Trydan Pro (4G and Ethernet)
- ΝέοReboot notice for the e-Charger when Wi-Fi is configured
- ΝέοStatistics refresh for greater robustness
- ΝέοExtension of time to add an e-Key for greater reliability
- ΒελτίωσηImprove the translations
- ΒελτίωσηImproved user messages on e-Keys
- ΕνημέρωσηRFID cards and e-Keys can be added, edited and deleted without needing to activate them.
- ΔιόρθωσηFixed a bug where the scheduled time did not appear on Pole Pro.
- ΔιόρθωσηFixed a time zone bug in charging profiles (it mainly occurred in Portugal).
-
- ΝέοNew tutorial pop-up screen created for cases where something needs to be explained to the user in greater detail.
- ΝέοError handling in charging profiles to alert the user if something has not been saved correctly.
- ΝέοPhotovoltaic aggregated into the charging profiles for Pole Pro.
- ΝέοImproved Bluetooth localization on some phones, and we show an error message if the Bluetooth connection fails.
- ΝέοAdded COM 1 and COM 11 types to the Huawei Chint meter in dynamic power control.
- ΝέοHidden the photovoltaic GIF for the Pole Pro models.
- ΝέοOption to add a free COM address for the Huawei inverter.
- ΝέοAdded the ability to configure a static IP for Pole Pro.
- ΝέοAdded a new message in the GIF for when there is no photovoltaic production.
- ΝέοNew translations added.
- ΝέοAdded user information about configuring the static IP on Pole Pro.
- ΝέοAdded 'car topic' to configure MQTT in dynamic control.
- ΒελτίωσηImprovement in the dictionary format (internal code).
- ΒελτίωσηImprovement in saving charging profiles: it is no longer impossible to save charging profiles with more than 5 time slots via Bluetooth.
- ΒελτίωσηOverall performance improvement of the application and code optimization.
- ΕνημέρωσηNew per-device notification handling instead of per-account, and unsubscription from them when the pairing is removed.
- ΕνημέρωσηSwitched the Bluetooth ID storage from localStorage to sessionStorage for more robust connection handling.
- ΕνημέρωσηName change from "V2C Meter 2.0" to "V2C ControlBox".
- ΔιόρθωσηFixed bug sending MQTT username and password in dynamic control.
- ΔιόρθωσηFixed a bug when displaying statistics that started at 00:00.
- ΔιόρθωσηFixed a bug when switching languages: the save button was sometimes not displayed.
- ΔιόρθωσηFixed a bug in the Shelly type submission in dynamic control.
-
- ΝέοShare charger available in 'User management'.
- ΝέοV2C Payments process opens within the same app for a more convenient payment experience for the user. (It does not work if the user has the MI Browser set as the default on their mobile phone; it does work for Google Chrome and Safari.)
- ΝέοAdded a notice to the user to resume charging if V2C Payments is enabled.
- ΝέοNew languages available for Trydan.
- ΝέοDynamic power control and charging profiles available on Pole Pro.
- ΝέοAdded Trydan compatibility with Enphase inverter.
- ΝέοAdded Trydan compatibility with P1 meter.
- ΝέοAdded Trydan compatibility with Modbus feeder meter.
- ΝέοAdded new additional configuration options for MQTT.
- ΝέοDifferentiation of types for Solis inverter (With or Without batteries).
- ΝέοAdded the Romanian language to Trydan.
- ΝέοAdded phase map configuration on Pole Pro under Special options.
- ΝέοImplementation of DeadLetters for logging background user errors.
- ΝέοPower tiers with current limit for Pole Pro.
- ΝέοAdded no-meter option in dynamic control for Pole Pro.
- ΝέοImportant notices when changing dynamic control to improve UX.
- ΝέοNew screen, list of available slaves for Pole Pro when acting as Master.
- ΒελτίωσηFaster charging from the configuration while offline.
- ΒελτίωσηImportant improvement in the stability of the Bluetooth key fobs, both over WiFi and over Bluetooth.
- ΒελτίωσηImproved design of the Special Options.
- ΒελτίωσηImproved Bluetooth search and location on iOS.
- ΒελτίωσηImproved some Bluetooth methods.
- ΒελτίωσηUX improvement when changing the e-Charger name.
- ΒελτίωσηImproves Bluetooth stability on Pole Pro.
- ΕνημέρωσηChange from kW to W for battery discharge.
- ΕνημέρωσηChanged "Dynamic control configuration" to "Charging profiles".
- ΕνημέρωσηName change: the Bluetooth key fobs are now called e-Keys.
- ΕνημέρωσηIncreased Bluetooth scan time on the main screen.
- ΔιόρθωσηFixed a bug when refreshing without any chargers.
- ΔιόρθωσηFixed a bug where the mobile back button did not work correctly on some screens.
- ΔιόρθωσηUpdating the RFID card or key fob list when activating them.
- ΔιόρθωσηImproved invoice view in English.
- ΔιόρθωσηDo not allow deleting e-Charger if the user is offline.
- ΔιόρθωσηAllow the charger to be enabled from inside with the self-locking feature activated.
- ΑφαίρεσηDeleting the Parking message in V2C Payments when the parking is free, to avoid confusion.
-
- ΝέοAdded an alternative SolarEdge meter to the Dynamic Control.
- ΝέοAdded confirmation before updating Firmware.
- ΝέοMore and better translations.
- ΝέοError handling in Payments.
- ΝέοAdded new Google Home image.
- ΒελτίωσηImproved connectivity and Wi-Fi reception on the home screen.
- ΒελτίωσηOffline configuration screen will load faster.
- ΕνημέρωσηConsolidate RFID card activation and editing on a single screen. (The same applies to Bluetooth key fobs.)
- ΕνημέρωσηChanged Huawei-type to COM address.
- ΕνημέρωσηSend to the home screen after restarting the e-Charger.
- ΕνημέρωσηChange when we make a free transaction in Payments.
- Ενημέρωση"Do not allow changes to Payments when there is no Internet connection."
- ΔιόρθωσηFixed a bug that asked for the Huawei type for any meter or inverter.
- ΔιόρθωσηFixed a bug when displaying statistics for charging sessions carried out between 22:00 and 00:00.
- ΔιόρθωσηFixed a bug when entering an empty power tier name.
- ΔιόρθωσηFixed a bug in Payments with the free rate.
- ΔιόρθωσηFixed a time zone bug in the statistics.
- Διόρθωση"Fixed small bugs."
-
- ΝέοThere is now a new type of photovoltaic system in the power tiers, called "No injection or isolated".
- ΝέοThe power tiers are stored on the server and in the cache to ensure correct operation on any device and in any situation. (With internet, without internet, with Bluetooth, etc.)
- ΝέοAdded Bluetooth key fobs for the Trydan.
- ΝέοAdded informative messages to the user for a better user experience.
- ΝέοThe token is only requested once per minute or when entering the application, and it is cached for better speed (previously it was requested with every HTTP call).
- ΝέοAdded the option to restart the e-Charger in "Special options".
- ΝέοGoogle Home is now available, and the corresponding information has been added to the app.
- ΝέοStronger error control in some posts for greater transparency for users.
- ΒελτίωσηImprovement in the retrieval and upload of statistics via Bluetooth.
- ΒελτίωσηImproved stability of some Bluetooth connections
- ΒελτίωσηImproved the design of the Payments screens.
- ΕνημέρωσηThe value will not be shown in the solar PV GIF if the data is 0 or null.
- ΕνημέρωσηIf the device language is Basque, the app will default to Spanish (previously it defaulted to English).
- ΔιόρθωσηFixed the photovoltaic GIF that would freeze on some iOS devices.
- ΔιόρθωσηMinor bug fixes.
-
- ΝέοAdded the IP address to the WiFi information.
- ΝέοTake the parking cost into account after charging with V2C Payments.
- ΝέοShelly static IP explanation.
- ΝέοReal-time updates of payment status on the main screen.
- ΝέοNew inverters added.
- ΝέοChange in Shelly inverter rates.
- ΒελτίωσηImproved Bluetooth reconnection on the main screen on iOS.
- ΒελτίωσηDifferentiated the option between swiping and clicking to lock the charger.
- ΒελτίωσηImproved Bluetooth stability for certain calls that sometimes failed.
- ΕνημέρωσηLarger button for payments without chargers.
- ΕνημέρωσηCorrected new QR format.
- ΕνημέρωσηAbility to modify OCPP via Bluetooth on Trydan.
- ΕνημέρωσηDesign change on the V2C Payments screen
- ΔιόρθωσηFixed push notifications on iOS.
- ΔιόρθωσηFixed the Google login issue on iOS when sharing the charger.
- ΔιόρθωσηFixed error with the PVPC 2 format.
- ΔιόρθωσηFixed an error when modifying tariffs.
- ΔιόρθωσηFixed an error in the download of payment invoices.
-
- ΝέοNew inverters added
- Νέο"New notice if you have successfully obtained the statistics via Bluetooth"
- ΝέοNow location is only required with Bluetooth turned on
- ΝέοTake the batteries into account in the photovoltaic GIF
- ΒελτίωσηGreater consistency in data sending and receiving via Bluetooth
- ΒελτίωσηDon't let the user enter an empty RFID name and new translations.
- ΔιόρθωσηFixed the retrieval of statistics via Bluetooth.
- ΔιόρθωσηFixed the bug with the photovoltaic GIFs
- ΔιόρθωσηFix for the notifications
Διαδικτυακή πύλη V2C Cloud
Τρέχουσα έκδοση 4.1.1 · Εκδόσεις: 45, πρώτη: Δεκέμβριος 2020
- ΝέοActivate or deactivate the default rate for each e-Charger in Payments.
- ΝέοEcocharging plan available for Oasys batteries.
- ΒελτίωσηUpload your own invoices in the Invoices section of Payments.
Προηγούμενες εκδόσεις 44
-
- ΝέοMandatory location for e-Chargers in Payments.
- ΝέοMake the charger public from Payments so that it is visible on other platforms.
- ΝέοAssign a different rate to each group in Payments.
- ΝέοMonthly fee rate within Collective Charging.
- ΒελτίωσηNew design for the Payments platform.
- 4.0.4ΒελτίωσηNew way to configure the Ingeteam inverter.
-
- ΝέοItalian tariffs.
- 4.0.2ΝέοRates by periods.
- 4.0.1ΝέοBattery prioritization in charging profiles.
-
- ΒελτίωσηNew design of the portal v2c.cloud.
- ΒελτίωσηSupport for viewing on mobile devices.
-
- ΝέοNew Sofar Solar inverter.
-
- ΝέοSelect time zone, manually or automatically.
- ΝέοNew Huawei Emma inverter.
- ΝέοNew Azzurro inverter.
- ΒελτίωσηIncrease in code size on RFID cards.
-
- ΒελτίωσηNew rates added.
-
- ΒελτίωσηNew PDFs in Spanish and English in Payments.
- ΔιόρθωσηCharging power limit on Denka.
-
- ΝέοCharging stops upon reaching the selected percentage for Denka models.
- ΝέοTPV icon.
- ΝέοPossibility to see more chargers on the main page.
- ΝέοCalculator in Payments rates.
- ΒελτίωσηSelection of the auto-lock time for Trydan with version 2.3.25 or higher.
-
- ΒελτίωσηChange in design when adding/modifying rates in Payments.
-
- ΔιόρθωσηBug fixes in cloud installation.
-
- ΔιόρθωσηFixing errors in RFID cards.
-
- ΝέοCatalan language added.
- ΔιόρθωσηBug fixes in the cloud power control.
- 3.2.12ΔιόρθωσηFixing errors in power control profiles and in the meter list.
-
- ΕνημέρωσηImprovement in RFID cards to manually support 14 characters.
- 3.2.10ΔιόρθωσηError fixing
-
- ΝέοFiltering by status (online/offline) available for e-Chargers.
- ΒελτίωσηVisualization of the e-Chargers version on the homepage.
- 3.2.8ΒελτίωσηGrouping of types in Payments invoices.
-
- ΔιόρθωσηFix when filtering date range in Payments and dashboard.
-
- ΒελτίωσηIncrease in the maximum number of power control profiles.
-
- ΝέοItalian language in Pole Pro.
- ΕνημέρωσηOptional OCPP customization properties in Pole Pro.
-
- ΒελτίωσηCreation of more intuitive power profiles.
-
- ΒελτίωσηImproved visual aspect when creating power profiles for cloud power control.
- ΕνημέρωσηGreater reduction in the cloud power control zoom and the option to reset zoom changed to center the installation.
-
- ΒελτίωσηAbility to download statistics as a .xlsx file.
- ΔιόρθωσηFixed various minor bugs.
-
- ΒελτίωσηAdded a waiting indicator when saving an installation in cloud power control.
- ΕνημέρωσηModified text and color according to the state of the e-Charger in cloud power control.
- ΔιόρθωσηImages of e-Chargers in installation view in cloud power control.
-
- ΝέοRight-click menu in cloud power control.
- ΝέοSelect, copy, paste, duplicate, and delete multiple elements in cloud power control.
- ΒελτίωσηMove and zoom in on an installation with the mouse wheel in cloud power control.
- ΕνημέρωσηThe upper power limit in the charging profiles has been modified.
- ΔιόρθωσηFixed various minor bugs.
-
- ΝέοAdded Basque language
- ΒελτίωσηPerformance improvement on the e-Chargers page and control panel
- ΕνημέρωσηNew way to display the details of the e-Chargers
- ΔιόρθωσηFixed various minor bugs.
-
- ΝέοRight-click to delete an active item during the creation or editing of an installation in cloud power control.
- ΝέοThe customer's email appears when downloading the transaction table from V2C Payments.
- ΒελτίωσηImproved interaction between elements during the creation or editing of an installation in cloud power control to avoid impossibilities.
- ΕνημέρωσηV2C Payments transaction table sorted by date in descending order.
- ΔιόρθωσηFixed various minor bugs.
-
- ΕνημέρωσηNew validations when creating rates in V2C Payments.
- ΔιόρθωσηFixed errors in displaying the power control settings.
- 3.1.0ΝέοNew design of the portal v2c.cloud
-
- ΒελτίωσηGreater speed also on the main screen, and in the charging of the user's e-Chargers.
- ΒελτίωσηChange the configuration to parallel for faster data loading.
- ΕνημέρωσηAll the inverters and meters available in the App have been added.
- ΔιόρθωσηFixing various bugs, updating and improving translations and user experience.
-
- ΝέοAdded list of wifi networks
- ΝέοAdded hamburger menu for better visualization of the canvas in smart charging.
- ΝέοAdded shared user management
- ΝέοAdded translations
- ΝέοAdded user help for CSV download
- ΝέοRomanian language added
- ΝέοAdded the partner creation form
- ΒελτίωσηCharging acceleration of the e-Chargers
- ΕνημέρωσηChange the navbar to black
- ΔιόρθωσηFixed issue with the smart charging zoom.
- 2.0.0ΝέοAdded Smart charging
-
- ΝέοAdded invitations to customers
- ΕνημέρωσηImage tags also translated
-
- ΝέοAdded to the main screen charger in payment mode or not with icon
- ΝέοNew translations added
- ΕνημέρωσηNew design of the main screen
- ΔιόρθωσηFixed bug with colors changing upon logout
- ΔιόρθωσηInvoice issue, the correct one was not downloading.
- ΔιόρθωσηTransactions are now resolved quickly, and there is a change in the format of the rates.
- ΔιόρθωσηResolved issue in payments with the tabs that were moving.
- ΔιόρθωσηFixed 'Update software' and bug with charger statuses.
-
- ΝέοAdded Payments option
- ΝέοInvoices added in the new tab and can be downloaded.
- ΝέοAdded flat rate or customized rate when adding a rate
- ΒελτίωσηImprovement in device charging
- ΒελτίωσηImprovement of designs to make them responsive on all devices
-
- ΝέοAdded plus charger
- ΕνημέρωσηAdd charger in the same way as in the app
- ΕνημέρωσηWe show fewer decimals in the tables.
- ΕνημέρωσηChange the design of the side menu and some labels.
- ΕνημέρωσηRemoved donuts and changed design on the screen up button.
- ΔιόρθωσηBug fixes and design improvements
- ΔιόρθωσηFix letter design and login and main screen
-
- ΝέοAdded software update in the configuration
- ΝέοCost calculation according to the rate
- ΔιόρθωσηChanging the rate is done correctly.
- ΔιόρθωσηControlled error changing WiFi without connection
- ΔιόρθωσηEnergy rate calculation is done correctly.
-
- ΝέοYou can now log in by pressing enter.
- ΒελτίωσηCharging screen improves without connection
- ΕνημέρωσηChange of design if there is no connection
- ΔιόρθωσηDynamic power control is adjusted properly.
- ΔιόρθωσηGlobal statistics are now updating correctly.
- ΔιόρθωσηFixed main screen hours
- ΔιόρθωσηCSV data download in the correct format
-
- ΝέοNew, more specific errors indicated for the user and installers.
- ΔιόρθωσηBug fixes when linking devices.
-
- ΒελτίωσηImprovements in website performance.
- ΔιόρθωσηFunctionality bugs fixed.
-
- ΝέοStyle improvements.
- ΝέοCreation of the V2C website.
- ΔιόρθωσηBug fixes.