Actualitzacions
El que canvia en cada versió del firmware dels nostres carregadors i de la plataforma V2C Cloud.
El més recent: Denka 1.1.0 · 12 nov. 2026
Trydan i Trydan Pro
Versió actual 2.5.2 · 47 versions des de febrer de 2022
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- NouDirect query of OCPP status
- NouNew Solplanet/AISWEI Inverter
- NouNew Hoymiles Inverter
- NouBattery discharge control: GoodWe, SolarEdge
- NouHuawei inverters direct connection without Dongle
- NouUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- NouNew "Unlimited" Wake-up 5 mode available from the LCD
- NouImprovements in Bluetooth cybersecurity
- MilloraFixes in FV mode + Minimum power
- MilloraOCPP: duplicate BootNotifications are avoided
- MilloraSecurity menu lock during vehicle charging
- MilloraImprovements for Linky-LORA
Versions anteriors 46
-
- NouCompatibility with SigEnergy inverters
- NouNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- NouWiFi connection for Deye inverters via Elfin
- NouExpansion to 105 RFID cards
- NouPAP/CHAP authentication for 4G connection
- NouMore stable OCPP connections
- MilloraReading the P1 and Victron meters is more reliable in the event of communication failures.
- MilloraStability of mixed three-phase charging
- MilloraError reporting and diagnostic system
- MilloraImprovement of home battery charging priority in PV charging modes
-
- NouManagement of home battery discharge in charging profiles
- NouUnlocking the Trydan by smartphone proximity
- NouNew models of SofarSolar and Azzurro inverters
- NouAdded current and voltage per phase in Home Assistant and Modbus API.
- NouWiFi connection in Deye inverters
- NouIncrease of up to 80 RFID cards
- NouBattery compatibility in SolarEdge inverters
- NouScroll text for long texts
- MilloraOptimization of Ethernet network interface
- MilloraImprovements in the Modbus TCP client
- MilloraImprovements in mixed three-phase charging
- MilloraImprovement of texts in German
- MilloraIncrease the voltage range of the installation from the control panel.
-
- CorreccióOCPP password bug
- CorreccióProblems connecting to CSMS after restarts
-
- NouTarget charge kWh
- NouNew SMA Sunny Boy model
- NouNew Fronius model with battery
- NouSelect Modbus API address ID
- NouNew Deye models
- NouSofar Solar inverters
- NouAzzurro inverters
- NouSelect MID address
- NouEMMA Huawei
- NouSecurity Profile 2 OCPP (wss + auth + CA cert)
- NouPrivate 4G SIMs in OCPP
- NouOcppFreeMode
- NouOCPP internal queue messages
- MilloraTime synchronization
- MilloraPower plate measurements 1.0
- MilloraWiFi improvements
- CorreccióExclusive mode bug with batteries
- CorreccióCoordinate "ContractedPower" and load profiles with HTTP API.
- CorreccióImprove RFID errors
- CorreccióMixed load bug
- CorreccióBug photovoltaic mode + minimum
- CorreccióBug statistics without FV via BLE
-
- NouMIFARE Ultralight RFID cards
- MilloraMore robust OTA update
- CorreccióBug management autolock with payments mode
- CorreccióBug in payments mode with RFID
-
- MilloraInstallation problem readings
- MilloraImprovement in BYD mode
- CorreccióBug with Wibeee inverter
-
- NouObtain firmware version via Modbus
- NouGoodWe via Modbus TCP
- NouOCPP: FirmwareManagement
- NouAutolock
- NouNew MID models
- NouNew wake-up modes
- NouAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- NouLinky meter for French meters
- NouModbus termination resistance
- NouReading individual properties HTTP API
- NouTurn off/Turn on logo and LCD from HTTP API
- ActualitzatImprovements in dynamic control
- ActualitzatImprovement in Sungrow inverter measurements
- ActualitzatImprovements in the OTA update
- ActualitzatImprovements in the button panel menu
- ActualitzatNew Deye models
- ActualitzatOCPP: improvement in MeterValues
- ActualitzatOCPP: send StatusNotification "Faulted" with errors and warnings
- ActualitzatOCPP: publish current version
- ActualitzatOCPP: BootNotification timeout
- ActualitzatNew NTP servers
- ActualitzatImproved WI-FI scanning
- ActualitzatImprovement in P1 meter
- ActualitzatImprovement in remote logs
- ActualitzatIoT call limitation per charger
- ActualitzatImprove RAM memory
- ActualitzatStability via Ethernet
- ActualitzatCorrected translations
- CorreccióError "Waiting for Power"
- CorreccióBug with RFID cards with long names
- CorreccióBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- CorreccióImprove statistics via Bluetooth
- CorreccióLocal balancing improvements for up to 10 devices
- CorreccióBug when sending RFID code in the statistics
- CorreccióBug with Exclusive PV mode and batteries
-
- NouStatic power control is added (only with Trydan consumption).
- NouMixed charging adapts to European rates.
- NouPower control programming with phase limits is allowed.
- NouThe power control adapts to European countries with phase current limits.
- ActualitzatThe power control algorithm has been modified step by step to apply PID modulation.
- ActualitzatThe static power control between sockets or between e-Chargers is improved.
- CorreccióThe failure of remote records is avoided when a disconnection occurs.
-
- CorreccióBug DTSU666-G meters
-
- MilloraImprovement in Wake Mode
- CorreccióFixed bug when changing the port in MQTT.
-
- NouEcoCharging to schedule charging automatically during the cheapest daylight hours.
- NouTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- NouCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- NouFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- NouImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- NouImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- NouOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- NouOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- NouOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- MilloraReading the power value of the batteries in Goodwe EH and ET inverters.
- MilloraSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- MilloraImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- MilloraImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- MilloraImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- MilloraOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- MilloraOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- MilloraOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- CorreccióOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- NouVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- NouSAJ hybrid inverters
- NouShelly Pro meters
- NouInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- NouDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- NouTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- MilloraLeak detection
- MilloraMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- MilloraModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- MilloraVisualization of the RFID card authentication process in OCPP
- MilloraThe memory used in JSON and OCPP goes to the SPI RAM.
- CorreccióInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- CorreccióCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- NouAdaptation of OCPP to new central systems
- NouNew Deye models
- MilloraImprovements in the direction detection of the V2C 2.0 control box
- CorreccióLEDs blink when there is no connection.
- CorreccióBug in Greenheiss hybrid
-
- NouDeye / Turbo Energy three-phase
- NouShelly Pro EM and Shelly Pro 3EM (Beta)
- MilloraShow text on bidirectional meters
- MilloraReadings with Fronius and DTSU666
- MilloraReaction times in the leak detector
- MilloraShow Waiting for Charge in Stop mode
- CorreccióBug with French language
- CorreccióRaise the HTTP server via Ethernet
- CorreccióBug in payments
- CorreccióRead-only in the OCPP properties
- CorreccióSave power segments via Bluetooth on some devices.
- CorreccióShelly Portugal measurements
-
- NouLive Remote Logs
- MilloraShow stop due to dynamic control
- MilloraRestarts due to reconnection attempts
- MilloraQA Protocol
- MilloraVoltage and Temperature Reading Power PCB
- CorreccióNaN measurement on some meters
- CorreccióError in Home Wizard readings
-
- MilloraPerformance improvement and future compatibility between Trydan and Trydan Pro.
- MilloraImprovements in OCPP protocol
- MilloraImprovements in the QA process
- MilloraImprovement in memory usage
- MilloraMore robust statistics
-
- NouNetworks with WPA3 security
- NouNew BLE (NimBLE)
- Noue-keys via BLE connection
- NouNew language: Romanian
- NouEnphase version 7.x.x, Solis with batteries
- NouAdaptation of the i2c power board
- MilloraAzure library update
- MilloraUpdate of ESP-IDF and Arduino-ESP32 libraries
- MilloraInvestor communication via WiFi connection without Internet
- MilloraImprovement in V2C 2.0 meter refresh rate
- MilloraImprovement in OCPP, adaptation to support disconnections
- MilloraImprovement in key fob detection
- MilloraImproved refresh rate
- MilloraImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- CorreccióModification of Deye/Turbo Energy batteries
- CorreccióCustomizable MQTT topics and username/password
- CorreccióDisconnection statistics report
- CorreccióBLE compatibility of iPhone
- CorreccióOperation of V2C 2.0 meter at night
- CorreccióAutomatic date and time
- CorreccióInteraction with Megane
-
- NouBug in photovoltaic three-phase mode
- MilloraWiFi recovery routine
-
- NouMixed three-phase charging available through the physical menu.
- NouAdded three-phase MID Meter
- NouInclusion of server ID 2 in SolarEdge inverters
- NouAdded Modbus registers with the meter measurement.
- NouHTTP commands added for integration with HA.
- NouEnphase Envoy Inverter (beta) (versions 5.x.x)
- NouV2C 2.0 error detection of clamp not connected
- NouMQTT Slave with user/password authentication and customizable topics (beta)
- MilloraImprovement of the WatchDog to prevent system freezing
- MilloraImprovement of nearby WiFi scanning
- MilloraBluetoothLE service reconnection protocol
- MilloraWiFi optimization IRAM and affinity with the Azure task
- MilloraReconnection protocol in the absence of WiFi
- MilloraFactory reset
- MilloraThe error code and LED interface
- MilloraImproved the Isolated Installation mode and zero feed-in.
- MilloraReduction in cut-off time through dynamic control to 1 min
- MilloraAutomatic detection of time and time zone
- MilloraThe optimization and refactoring of the measurement slaves
- MilloraUnlocking with BLE Tag
- CorreccióOccasional LCD freezes
- CorreccióFalse positives from the leak detector
- CorreccióProblems with the MID Meter
- CorreccióLED error during update
- CorreccióDefault value for JSON type variables
- CorreccióMeasurement at 0 in Deye/TurboEnergy Inverter
- CorreccióVisual errors and local balancing address assignment
-
- NouSolar Discount on Shortcuts
- NouDeye/TurboEnergy Inverter Beta
- NouPhoenix Contact meter
- NouCarlo Gavazzi meter
- MilloraOCPP improvements and tested in MONTA
- MilloraProblems in dynamic control
- MilloraReconnections and WiFi Stability
- CorreccióFrozen LCD
-
- NouIsolated Mode in Photovoltaic Modes
- NouDutch, Danish, and Valencian
- NouLeak sensor modes (installer menu)
- NouMID meter (installer menu)
- NouNew Ingeteam protocol (Battery Management)
- NouThree-phase meters DTSU666
- NouSDM three-phase meters
- MilloraLocal Balancing Protocol and priorities
- MilloraDetection of ports and hosts in OCPP
- MilloraStable version of SMA Sunny Boy
- MilloraPortuguese version of Wibeee
- MilloraFronius measuring home consumption
- CorreccióUnexpected locks and unlocks
- CorreccióWhite blinking in locked mode removed
- CorreccióError selecting the slaves in beta
- CorreccióError of SolarEdge three-phase inverters
-
- NouChanges and improvements in calibration
-
- MilloraCalibration adapted to the new hardware
- CorreccióData analysis in Kostal Piko fixed
-
- NouLocal balancing between Trydans available via WiFi or wired connection.
- NouSDM-220/320/120 (Tested with the Eastron brand)
- NouDDSU-666 Meter (Common in Huawei installations)
- NouSelf-calibrating without the need for a car
- NouManual hour available
- NouHTTP requests to manage the logs
- NouNew Modbus Registers
- NouGreenheiss inverters
- NouSAJ inverters
- NouWired Solis inverters
- NouResponse time in configurable dynamic control
- MilloraConfigurable installation voltage
- MilloraNew manufacturing process
- MilloraIncluded Shelly three-phase but without FV measurement.
- MilloraCar consumption via MQTT fixed
- MilloraImproved and more intuitive physical menu
- CompatibilitatBeta models of Goodwe: the battery measurement is canceled.
- CorreccióBug in Max and Min Intensity via Modbus fixed.
- CorreccióFalse positives in the leak detector fixed
-
- NouPrevention of conflicts between slaves and the cloud
- CorreccióGoodWe conflicts and Azure initialization
- CorreccióFix in Shelly with only three-phase.
-
- MilloraPending statistics will be sent only once.
- MilloraShelly 3EM three-phase and modification for Portugal
- CorreccióModbus Multiple Readings Hotfix
-
- NouNew Modbus registers
- NouRFID reader in alpha version
- NouSolaX X3 híbrido compatible
- NouAvailable calibration and shortcuts via WiFi
- MilloraOCPP Improvements
- MilloraImprovement in WiFi scanning
- MilloraImprovement in reconnection routines
- CorreccióBluetooth timezone failure
- CorreccióError in Trydan synchronization - APP
- CorreccióStatic IP configuration in Trydan via WiFi
- CorreccióError saving Modbus parameters
-
- NouNew method for calibrating communication with the car
- NouBeta version of the GoodWe ET/EH/BT/BH
- MilloraImprovement in the communication analysis with the car
-
- NouAuto lock after 60 seconds without a car (shortcut)
- NouModification for Three-Phase Installations in Portugal for V2C 2.0
- NouKostal Piko is added.
- MilloraReformulation of the Dynamic Control Algorithm
- MilloraImprovement in the refresh rate of Huawei inverters
- MilloraSolarEdge stable (Meter measuring export)
- MilloraStable version of GoodWe
- MilloraDetection of state D and E according to protocol
- MilloraImproved QA process
- CorreccióStored in memory after writings via Modbus TCP and RTU
- CorreccióBug in the FV measurements and peaks resolved for V2C 2.0
-
- NouGoodWe in beta version
- NouCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- MilloraMQTT in stable version
- MilloraVictron in stable version
- MilloraImproved connection with Azure
-
- NouMQTT slave beta version
- MilloraDetection of power direction in Wibeee
- CorreccióThe Victron and SolarEdge inverters were bringing down the system.
-
- NouSolarEdge inverter added (Beta)
- NouVictron inverter added (Beta)
- NouAutolock enabled in shortcut (60 s)
- NouAutomatic time zone detection
- NouAlternative meter for car consumption (RS485)
- NouFV Exclusive with configurable variation
- NouNew Languages (French, Italian, and German)
- CorreccióFixed error in minimum power mode.
-
- MilloraImprovements in Dynamic Control with batteries
- MilloraImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- CorreccióResolved the IP configuration issues for Trydan with WiFi and BLE.
- CorreccióResolved the issues with the IP configuration of Shelly BLE.
-
- NouInclusion of the Wibeee meter
- NouSlave 2.0 compatible with Type 1 and Type 2 installation
- NouChange in the established connection blinking
- NouDetection and measurement of bifacial load
- NouImprovement in the collection and transmission of charging data
- NouAlternative Meter Phoenix Contact (ModbusRTU)
- NouModbusRTU in Trydan (simultaneous slave and master)
- NouStatic IP configuration in Trydan
- NouPossibility to select the IP in Shelly
- MilloraInclusion of maximum intensity in OCPP (as a property)
- MilloraImprovement in the reading of Solax inverters
- MilloraInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- MilloraModbusRTU and Modbus TCP server in Trydan
- ActualitzatFirst stable version of Ingeteam
- ActualitzatImprovement in the speed of the leak detector
-
- CorreccióError solution in manufacturing when saving WiFi
-
- NouEliminate false communication errors from the slaves.
- NouSave the first Shelly that Trydan connects to.
- ActualitzatWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- MilloraImprovement in telemetry recovery in OCPP
- MilloraImprovement in scanning nearby WiFi networks
-
- NouInternal Azure ping every 15 seconds to detect disconnections.
- NouSeparate reconnections to avoid crashing the server.
- NouOCPP adaptation to work with Home Assistant
- MilloraMigration of the I2C for the clock and LCD to native idf
-
- MilloraIncrease maximum binary size in local webServer
- CorreccióRecovery of OCPP transactions to prevent telemetry failures
-
- NouThe configuration of different IDs for Huawei inverters is added.
- MilloraCorrection of the power reading of the house
- CorreccióCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- NouPayment Method (V2C Payments)
- NouOCPP Protocol
- MilloraImprovement of WiFi and Bluetooth stability and reconnection
- CorreccióReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- CorreccióCorrection of the maximum file size for updates on Local Server
-
- NouList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- MilloraReconnection with V2C Cloud after communication loss
- CorreccióCorrected Shelly and Solax routines
-
- NouShortcuts on the buttons: Lock and Charging Schedule
- NouLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- NouAP mode when the configured WiFi is not available
- MilloraImprovement in LED error codes
- MilloraAdaptation for compatibility with Huawei inverters
-
- NouWe added connectivity with Fronius inverters.
- MilloraImprovements in screen writing and removal of strange characters
- MilloraImprovement in the transmission of statistics via both WiFi and BLE.
-
- NouError correction x and y
Alva
Versió actual 1.0.4 · 5 versions des de agost de 2026
Millores en la sessió de càrrega i seguretat BLE
- MilloraGestió de sessió de càrrega
- MilloraMajor seguretat BLE
- CorreccióError en mostrar el temps i energia a l'App i Installer Panel
Versions anteriors 4
-
- CorreccióError amb inversor Ingeteam
- CorreccióError amb el comptador Homewizard P1
- CorreccióError amb el mesurador Eastron
- CorreccióError amb inversor GoodWe
-
- NouConnexió a Home Assistant
- NouLògica de reset diari
- MilloraDesbloqueig amb clauers i RFID
- MilloraGestió d'excepcions, watchdog i neteja d'errors
-
- NouIdentificació connector mitjançant LED
- MilloraLògica de reinici
- CorreccióError en payment relacionat amb el temps
-
- NouLògica de QA i fabricació
- MilloraGestió de sessions en ambdós connectors
- CorreccióErrors menors
Pole Pro
Versió actual 6.1.3 · 47 versions des de maig de 2023
Tens el Pole anterior? Consulta les seves actualitzacions.
- CorreccióThe charger no longer hangs when rebooting while shutting down the 4G module or dynamic power control
Versions anteriors 46
- 6.1.2CorreccióOCPP security event notifications are no longer sent when the connection uses no security profile (profile 0), since some central systems do not support them
-
- CorreccióCorrected default APN for Wireless Logic SIM cards in Belgium
-
- NouAudible buzzer feedback
- NouSupport for registering multiple RFID cards
- NouReading of the installation meter over Modbus RS485 on DC chargers
- NouDynamic power control for DC installations — master and slave units now share and honor the installation power limit
- NouLive display of actual consumption versus offered current on the charger screen
- NouOn-screen guidance walks the user through registering an RFID card
- NouOCPP connection password can now be set from the Cloud and Bluetooth
- NouOCPP now supports security profiles, encrypted TLS connections and Basic Authentication for the central system
- MilloraLanguage codes standardized to the ISO 639-1 format
- MilloraReduced volume of messages sent to the Cloud
- MilloraTime synchronization with the CSMS no longer floods the system log
- MilloraLog rotation no longer loses history when the disk is full
- MilloraSafer firmware updates
- MilloraMore reliable connectivity with automatic failover between Ethernet and 4G
- MilloraCharges history now loads page by page instead of the whole history at once, for a faster tab
- CorreccióMeasurer error message now reads clearly
- CorreccióMore accurate meter-reading validation
- CorreccióCharge metrics are preserved if a charge is interrupted unexpectedly
- CorreccióScreen orientation set in configuration is now applied correctly
- CorreccióFree-charge mode could not be disabled from the installer panel
- CorreccióDynamic power limit was not applied at tariff/hour boundaries, briefly leaving an installation without a limit
- CorreccióResolved random service restarts (crashes) caused by network device discovery
-
- MilloraMore reliable RFID card reading with optimized antenna configuration from first use
- MilloraImproved stability and responsiveness of the charger's web interface
-
- NouOCPP - Immediate "Preparing" status when receiving a remote start command via OCPP
- NouWiFi disabled by default on devices without WiFi configured
- MilloraMore reliable RFID card reading with periodic reader reinitialization
- MilloraBetter cable connection detection and RFID timeout handling
- MilloraCDP - More stable network device discovery, preventing unnecessary register/unregister cycles
- MilloraImproved stability when applying configuration changes to the charger
- MilloraAutomatic migration of legacy pending OCPP messages after update
- MilloraImproved network handling when switching between manual and automatic IP configuration
- CorreccióPower factor value conversion for Carlo Gavazzi meters
- CorreccióImprovements in power measurement accuracy in single-phase or two-phase installations
- CorreccióOCPP - Smart Charging profiles with defined duration now applied correctly
- CorreccióOCPP - Local authentication cache overflow that could prevent charging sessions from startIing
- CorreccióOCPP - OCPP transactions stuck due to unreleased semaphores or null keys
-
- NouEnhanced web server for accessing and editing charger properties
- NouVisual improvements to the web server interface
- NouPersistent price display on screen when the payment system is active
- NouRefined error reporting to the cloud
- NouPower loss detection
- NouWi-Fi disable option from the installer panel
- NouNew buzzer system implementation for white boards
- MilloraEnhanced RFID calibration with on-screen indicator during the process
- MilloraRFID reader no longer forcibly activates when OCPP or Payments are active; explicit configuration is respected
- MilloraRefined cable connect/disconnect notification on each event when payments are active
- MilloraOptimized RFID card readings
- MilloraOCPP - Improvements to the offline transaction queue
- MilloraInternal connection optimization and overall performance improvements
- CorreccióOCPP - Improved measurement value reporting
- CorreccióRefined out-of-range measurement error detection
-
- NouSoftware-level leak detection enable/disable
- MilloraAdjusted cooldown time between charges when a leak is detected
- MilloraOCPP - Improvements to the offline transaction queue
-
- MilloraWhen OCPP is active, we now show on screen when card passed is not registered in central system.
- CorreccióAfter update OCPP image and QR is now recovered.
-
- CorreccióFixed issue where it didn't allow a remote start if a car is connected but not in an active transaction.
- CorreccióFixed issue in setup interface.
- CorreccióFixed monophasic Carlo Gavazzi measurer.
- CorreccióFixed OCPP issue where it wouldn't charge in connector 2 if connector 1 is charging.
-
- MilloraImproved network features mainly 4G connection.
-
- MilloraImproved OCPP charge handling.
- MilloraEnhanced reliability in the smart charging logic.
- MilloraImproved features when stopping a charge with invalid identifiers.
- MilloraImproved QR configuration for OCPP.
- MilloraImproved error handling when sensors or communication components fail.
- MilloraBetter log management to prevent the device’s storage from filling up.
- MilloraImproved USB connection features.
- MilloraImproved RFID calibration and detection display.
- MilloraImproved features related to Bluetooth.
- MilloraImproved dynamic power control allowing charge at minimum intensity if master is not detected.
-
- NouManual timezone setting is now available – The user will be able to configure the timezone even if automatic detection is disabled
- NouCreated a contingency page in case app is not running
- NouAdded Italian option for screen
- NouAdded default payment QR to pay without app
- NouAdded new OCPP personalization options - The user can now set 2 QR codes on the screen
- MilloraImproved updater
- MilloraImproved network connections
- MilloraImproved OCPP meter values
- MilloraImproved discovering devices when dynamic control is active
- MilloraImproved user interface when updates are in progress
- MilloraLocal load balancing is now implemented as dynamic control based specific conditions
- MilloraImproved Bluetooth connection
- MilloraImproved 4g connections robustness
- MilloraImproved STM32 lock timings
- MilloraImproved OCPP now allows external intensity limits
- MilloraImproved data consumption
- CorreccióWhen locking a connector while charging, it now sends end charge telemetry correctly
- CorreccióFixed dynamic control issues
- CorreccióFixed Carlo Gavazzi power meter
- CorreccióFixed OCPP LMS, diagnostics, and charging profile clearing
-
- NouAdded shared library
- NouTimezone can be set manually
- NouTime is now synced with Central System if OCPP is active
- MilloraImproved version/update manager
- MilloraImproved megabyte conversion of Network Monitor
- MilloraObtaining timezone now doesn't need to have correct time by using only http urls
- MilloraMobile usb device name is now obtained dynamically since more usb ports might be used due to TPV
- CorreccióFixed power control issues
- CorreccióFixed that when locking connector during a charge it now ends correctly
- CorreccióRecalculate reboot time when changing time with ble
- CorreccióWe now show on screen when non registered RFID is passed while OCPP is active
- CorreccióFixed OCPP freemode rfid issues
- CorreccióDuplicate StatusNotifications are removed from offline queue
- CorreccióFixed "infinite" OCPP offline queue issue
-
- NouAPN can now be set manually
- MilloraWe now show on screen different wifi images depending on how strong signal is to let know the user how good the connection is
- MilloraGeneral OCPP improvements: we check connection to CS instead of internet for local functioning, we notify a real value now when there's a stop transaction due to power loss, fixed edge cases where connectivity is lost, new ocpp key MaxEVCurrentOffered implemented which limits charge with key instead of smart charging handler, safety mechanisms for ocpp to be more robust
- MilloraIn 4g, increased rssi range for "excellent" so that it indicates correctly when the reception is good
- MilloraImproved data consumption
- MilloraImproved robustness of update
- ActualitzatAccess point time increased to 15 minutes
- CorreccióHandled issues when SSID has whitespace
-
- CorreccióAccess point improvements.
- CorreccióFixed QA issues.
-
- NouNew direct method to obtain additional information for Smart Charging.
- NouFixed random reboot time.
- MilloraFixed unset RFID.
- MilloraFixed Unknown measurer and made distinction between Unknown measurer and wrongly configured measurer.
- MilloraOCPP Free mode can be toggled through OCPP keys.
- ActualitzatFixed BLE connection with iphone and fixed bluetooth communication error that appeared on app.
- ActualitzatNetwork improvements. No interface resets performed at boot which improves bootup time. Network changes now don't require reboot. When changing WIFI settings or ip ethernet settings, it connects after setting it instead of rebooting.
- CorreccióFixed issue where things on screen were missing in one connector chargers.
- CorreccióFixed time/timezone issue caused when the date is off by a few days.
- CorreccióNew property added to toggle if vehicle should be able to charge even though measurers aren't working ( Only works when OCPP, payments or dynamic control isn't enabled ).
-
- NouReflect on screen when charge is paused.
- NouMade reboot time random.
- CorreccióIncreased SAS token time to live of azure.
-
- NouChanges made to reduce network usage that can be toggled on or off.
- NouFixed case where config is corrupted or missing and would give trouble at startup.
- NouWe now send dead letter if cpu gets too hot and cpu temperature is now logged.
- MilloraFixed OCPP inverted measurer error.
- MilloraAdded mechanism to disable or enable Wifi and bluetooth.
- MilloraWe now report information regarding which type of connection to the internet the e-charger has.
- ActualitzatChanged led colors. Switched State A (now white) and State B (now green) colors.
- CorreccióFixed set threshold values and neopixel leds of Stm32. We can now also obtain control pilot value from Stm32.
- CorreccióOCPP ConnectionTimeOut value can now be changed on the fly.
- CorreccióWe now report iccid of sim card is connected. If sim is connected but we can't obtain iccid, we send dead letter.
- CorreccióFixed log download of http interface.
-
- NouLTE signal is now reflected correctly instead of always showing great signal.
- MilloraFixed wathdog reboot after doing hard reset.
-
- NouAdded dynamic photovoltaic.
- NouAdded dead letters: measurer fails and kernel error.
- NouProperty "wifi_info" is now reported.
- NouProperty "wifi_static" can be set through ble.
- NouWe can now obtain statistics through direct method.
- NouAdded individual log level for each type of logger.
- NouAdded neopixel led type for stm32.
- NouWe can now set threshold values with stm32 and get control pilot value if debug log of "Stm32" is activated.
- MilloraImprovements in dynamic control, fabrication, QA, Azure, OCPP, config handling, 4g, access point and stm32.
- MilloraWe now obtain timezone through url.
- MilloraRemoved raspbian logo and desktop during boot and added V2C logo.
- MilloraChanged default language after fabrication from english to spanish.
- ActualitzatGeneral bug fixes.
- CorreccióWhen downgrading we ensure that version we downgrade to is compatible.
-
- NouFixed property "ocpp" change bug.
- MilloraProperties "powerweekday", "powerweekend" and "phase_map" can be changed through bluetooth.
- MilloraChanged configuration handling to differentiate internally and externally set variables so that externally set or obtained variables are handled accordingly following the property schemas.
- CorreccióWe now report wifi_static with static ip configuration.
- CorreccióStatistics are now saved locally.
-
- MilloraMeasurer fails are now registered with modbusrtumeasurer.
- MilloraScreen font bigger for small title.
- CorreccióValidate configuration with schemas during loading.
-
- NouOCPP authorize can now function by connector.
- NouOCPP WSS connection.
- NouFixed OCPP parent id tag bug.
- NouOCPP meter values now work for 3 phases.
- MilloraFixed error 3 not appearing on screen.
- MilloraFixed energy by hour bug.
- MilloraChanged measurer reading approach for faster reads.
- MilloraWith dynamic balancing we now show used and available power in frontend.
-
- MilloraWe show dynamic balancing information on screen.
- MilloraSimplified handling of configuration.
- MilloraImproved dynamic balancing.
-
- MilloraCharger won't reboot if car is in state B and OCPP or Payments is active.
- MilloraWhen car changes from state C to B, charge information will persist on screen.
- MilloraCurrent state charge now reports errors.
- MilloraAdded configuration property validation.
- CorreccióDirect method to obtain dynamic balancing information.
- CorreccióGeneral dynamic balancing improvements.
- CorreccióOCPP improvements.
-
- CorreccióChanged remaining set_basic_unreported_config to set_basic_config.
-
- NouFix dynamic control bug, powerbytram is not being updated.
- NouFixed bug where whitelist of reported items wasn't being applied and properties weren't being stored in database.
- MilloraRemoved non-repetitive logger.
- MilloraChanged access point interface to change apn, with manual mode or mobile operator mode.
- ActualitzatRefactored config charge box. Removed BASIC_UNREPORTED and created whitelist of properties to report.
- ActualitzatPhase map is now not applied to installation meters.
- CorreccióFixed payment bug where a charge couldn't be started properly if charge was started with the hose unlocked.
- CorreccióFix bug with power being zero, dynamic control failing when there are no connectors.
- 3.1.8ActualitzatForce WIFI and bluetooth GPIO pins for compute module 4 to work.
- 3.1.7ActualitzatForce 4g GPIO pins for compute module 4 to work.
-
- MilloraWhen we detect that measurers aren't working, we send an unblock command in case there's a charge and the charger has lost power.
- MilloraCreate section BASIC_UNREPORTED for properties that are used but we don't want to report.
- MilloraLocked value has persistance when measurers fail.
- CorreccióWhen we don't receive petitions from chromium we now press enter and Ctrl+F5 if there's anything we need to accept.
-
- CorreccióChanging WIFI configuration with bluetooth now reboots the charge point.
-
- MilloraFixed configuration file so that software works with compute module 3 and 4.
- MilloraChanged reboot logic. It will now reboot if there's a car connected but charge is not allowed.
- CorreccióChanged payments qr code.
- CorreccióWe can change log level with property.
-
- CorreccióMeter values fixed. We now send wh instead of kwh.
-
- NouPause is now reset when it goes back to state A.
- NouShow measurer error as "Error 3" on connector. Behaviour is that connector is locked until it's fixed.
- NouSet wire connected again.
- MilloraFixed general network errors. Improved access point and wifi connectivity.
- CorreccióFixed error where timezone wasn't set correctly so time appeared incorrectly.
- CorreccióFixed payment_max_mode timeout bug.
-
- NouFixed power, it was shown in W and is now in Kw.
- MilloraChange timezone automatically.
- CorreccióAdded triphasic phoenix contact measurer.
- EliminatFixed removal of grey notification update.
-
- NouWhenever there's an action that provokes rebooting, it will show on screen that it's going to reboot and the cause.
- NouScreen orientation can now be set and depending on parameter.
- NouAdded error message 1 and 2.
- NouBluetooth patch so that bluetooth initialization takes less time.
- NouCreated patch system. System level changes will be applied with this system.
- MilloraMeasurer refactoring.
- MilloraImei obtention improved.
- MilloraInitial version of bluetooth finished: Obtain properties change basic properties, program charge, reboot, add rfid and change wifi.
- MilloraBoot improvements. "Page not found" isn't shown anymore. Boot is faster. There's a gif indicating that system is starting.
- MilloraObsolete properties are now deleted automatically so that they aren't reported.
- ActualitzatRFID can now function with payments. If RFID is enabled with payments, registered cards will be able to start charges. If RFID is disabled with payments, no card will be able to start a charge.
- CorreccióLimited number of messages we can send to iothub.
- CorreccióIn OCPP, fixed sending of meter values. Now sending in wh and not in kwh.
- CorreccióBoot patch so that GPIO pin initialization takes less time.
- CorreccióMonophasic measurer Eastron SDM220 implemented.
- CorreccióImproved robustness on all direct methods.
- CorreccióFixed bug where it didn't reconnect properly to iothub when it disconnected.
- CorreccióCreated direct method to put a QR code on the OCPP screen.
- EliminatRemoved wire_connected event telemetry.
- 3.0.9CorreccióFixed ocpp meter value Energy.Active.Import, when measurer is flipped.
-
- ActualitzatFixed error where e-Charger couldn't obtain dns when connected with WIFI.
- CorreccióFixed local load balancing when one connector was charging. Now when one connector is charging, it will charge at the set intensity.
- 3.0.7CorreccióFixed ocpp Remote Start Transaction and Remote Stop Transaction.
- 3.0.6CorreccióFixed error that ocurred in ocpp where it didn't clear properly the idtag when finishing a transaction.
-
- ActualitzatChanged access point ip from 192.168.44.1 to 192.168.4.1
- ActualitzatWe now report the charger's state instead of the requested vehicle state.
- ActualitzatChanged access point master password.
- CorreccióFixed websocket connection issue with nuitka compilation.
-
- MilloraImproved update logs.
- 3.0.3NouMoved Version from center to right side and added V. before the version number.
- 3.0.2MilloraSTM will now detect SPI bus communication errors and will automatically reset.
-
- NouScreen now shows when RFID card is registered.
- NouTop bar now shows version and if access point is accessible.
- NouAccess point interface now has, local load balancing, rfid card registering and log download.
- NouCheck that compute module and board have been created properly.
- MilloraScreen is now monitored so that it refreshes in the case that no requests have been made after 15 seconds.
- MilloraQA diagnostic is obtained through access point.
- MilloraReduced access point available time to 10 minutes.
- CorreccióFixed bug where connector stopped working properly when sending intensity 0.
-
- NouInitial Version
Denka
Versió actual 1.1.0 · 10 versions des de octubre de 2025
- NouControl dinàmic de potència entre diversos carregadors Denka i Pole en la mateixa instal·lació, amb repartiment automàtic segons la potència disponible.
- NouUn Denka mestre pot llegir el comptador de la instal·lació per RS485 per repartir la potència de tota la casa.
- NouLa potència màxima del control dinàmic s'ajusta en kW des de la plataforma V2C
- NouOCPP: Compatibilitat amb perfils de seguretat OCPP 0, 1, 2 i 3, i amb autenticació Basic Auth; la contrasenya OCPP es pot canviar des del núvol, Bluetooth i la web local.
- NouOCPP: Els errors interns del carregador es notifiquen al CSMS mitjançant StatusNotification
- NouHistorial de càrregues amb mètriques detallades de cada sessió (energia per hora, estat de càrrega final i límit del vehicle), paginat al web local.
- MilloraComunicació amb el mòdul de potència més estable, amb molts menys errors durant la càrrega i sense falsos avisos de fallada en arrencar.
- MilloraReinicis més fiables del carregador
- MilloraConnexió 4G més ràpida a la xarxa, amb APN per defecte i suport per a SIMs Wireless Logic.
- MilloraXarxa: Millores significatives en la gestió de la connexió de les xarxes. Canvi automàtic entre Ethernet, WiFi i 4G més estable, i IP estàtica aplicada correctament.
- MilloraGestió de l'espai en disc: els registres es roten i limiten sense perdre l'històric i s'evita omplir la memòria.
- MilloraMillora en la validació després d'un error de comunicació amb el cotxe (SLAC) i el sistema de pagaments
- MilloraMillora significativa del report d'errors o deadletters a les diferents plataformes V2C
- CorreccióLes càrregues interrompudes per un tall de llum es tanquen i es facturen correctament en tornar el corrent.
- CorreccióOCPP: La cua de missatges OCPP ja no es bloqueja quan el servidor respon amb error.
- CorreccióOCPP: Si el servidor OCPP rebutja l'inici d'una transacció, la càrrega s'atura.
- CorreccióOCPP: El mode lliure ja es pot desactivar des del panell de l'instal·lador.
Versions anteriors 9
-
- MilloraEls pagaments amb targeta es tanquen quan el vehicle s'ha desconnectat completament, de manera que l'import cobrat sempre correspon a l'energia subministrada.
- MilloraReinicis més fiables en carregadors amb connectivitat mòbil (4G).
- CorreccióEls perfils de càrrega intel·ligent amb durada enviats per OCPP ara s'apliquen correctament.
- CorreccióEls missatges OCPP pendents d'enviament ja no es perden en actualitzar des d'una versió anterior.
- 1.0.5MilloraEl carregador arrenca correctament fins i tot quan no hi ha connexió de xarxa disponible.
-
- MilloraLa connexió amb la teva plataforma OCPP es restableix automàticament després d'un error de xarxa.
- MilloraEl lector RFID es recupera per si sol després d'un error de lectura, sense necessitat de reiniciar el carregador.
- CorreccióEls canvis de configuració podien deixar d'aplicar-se després d'un error intern. Ara s'apliquen sempre.
- CorreccióEl terminal de pagament ja no s'inicia quan està deshabilitat.
- 1.0.3CorreccióEl carregador podia deixar de respondre després d'un temps prolongat en funcionament. Solucionat.
-
- MilloraLa teva configuració i les teves claus OCPP es conserven en actualitzar el carregador.
- MilloraFirmware de control de potència actualitzat, per a una càrrega més estable i precisa.
- CompatibilitatDenka s'incorpora a la plataforma unificada de V2C i passa a la nova línia de versions 1.x, que substitueix la sèrie 0.14.x.
- CorreccióErrors en iniciar o aturar una sessió de càrrega per OCPP.
- CorreccióEl carregador ja no reintenta connectar-se al núvol de manera indefinida amb credencials caducades.
- CorreccióLes targetes RFID amb codis numèrics es llegien de manera incorrecta.
- CorreccióLes actualitzacions podien fallar en passar des de determinades versions.
-
- MilloraCàrrega intel·ligent: control lliscant de potència al panell de l'instal·lador.
- MilloraMillores generals en l'estabilitat i fiabilitat del sistema.
- MilloraMillores generals en el funcionament i l'estabilitat.
- CorreccióCorreccions en el comportament de la càrrega intel·ligent OCPP.
- CorreccióCorrecció de problemes en la gestió i recuperació d'alarmes del sistema.
-
- NouAturada de càrrega a un SoC específic
- NouInforme de l'estat del botó d'emergència.
- NouElement lliscant al servidor web.
- NouInforme del SoC del vehicle i protocol al backend.
- NouMètode directe `currentcharge` ara retorna el temps restant per al SoC bulk i complet.
- NouMètode directe per reiniciar el servei `autossh`.
- NouConfiguració del mode IP (pública/privada) per a la connexió 4G.
- MilloraCàrrega intel·ligent OCPP.
- MilloraMillores de rendiment.
- MilloraArrencada del mòdul WiFi.
- MilloraMigració del servidor HTTP.
- CorreccióCorrecció d'errors en la configuració d'arrencada.
- CorreccióCorrecció d'errors en la càrrega intel·ligent d'OCPP.
- CorreccióCorrecció d'errors en el servidor web i la comunicació amb el maquinari.
-
- MilloraMillora del rendiment de l'enviament de paràmetres DC.
- CorreccióArreglat el bloqueig de SPI.
- CorreccióError en `TimerHandler` amb `n_connectors`.
-
- NouIntegració de canvis en les propietats reportades.
- NouAjustament de la calibració de RFID des del panell d'instal·lació.
- NouIntegració de la propietat observada de la biblioteca compartida.
- NouAturada de càrrega a un SoC específic.
- NouLlista blanca de càrrega per MAC.
- CorreccióError en `TimerHandler` amb `n_connectors`.
- CorreccióHotfix per a l'increment de missatges enviats.
Screen
Versió actual 2.20 · 66 versions des de març de 2022
- CorreccióFixed rfid bug in ocpp.
Versions anteriors 65
- 2.19CorreccióFixed rfid card issue in stop transactions.
- 2.18CorreccióFixed OCPP error where transaction wasn't started when states passed from C to B to C.
- 2.17CorreccióCB Master: Improved robustness of rfid charge track so that if one connector is fully charged and a different car wants to charge in the other connector it can now charge.
- 2.16CorreccióCB Master: Fixed bug that wouldn't allow two connectors to charge with payment + RFID.
- 2.15NouCB Master/CB N: Rfid cards can start a charge in payment mode if rfid is enabled.
- 2.14CorreccióCB Master: We check if measurer is flipped by connector instead of globally.
- 2.13CorreccióCB Master: We check if measurer is flipped while configuring meter values so that they are sent correctly.
-
- CorreccióCB N: Fixed cloud iot problem.
- CorreccióCB Master: Configuration file is restored correctly in the case it's lost. This provoked the page not found error.
- CorreccióCB Master: Fixed bug where a connector couldn't start a charge when there's a car on the other connector with state B.
- 2.11CorreccióCB Master: Meter power bug fix.
-
- NouCB N: Car state management D and E.
- MilloraCB N: General payment improvements.
- MilloraCB N: In payment method, when you move from status c to b, it does not allow you to reload again until you start a new transaction.
- MilloraCB N: Improved restart logic when any OCPP configuration is changed.
- MilloraCB Master: General meter improvements.
- MilloraPole: Filter to reduce number of logs.
- CorreccióCB Master: Fixed payment bug that sent the upload permission to the wrong connector.
- CorreccióCB Master: Fixed bug that when two cars were connected and the B connector was in B status, when the card was swiped, the B was set to charge when the A should be set.
- CorreccióCB Master: Total energy bug arrangement from version using imported and exported energy.
-
- MilloraCB Master: Meter restructuring.
- MilloraOCPP: General improvements in Smart Charging and Tx Profile implemented.
- MilloraOCPP: Changes due to restructuring of the meter.
- MilloraOCPP: Restructuring of smart charging. Obtain composite timetable with several profiles.
-
- NouCB Master: Integrated SACI meter and changes so that the serial configuration per connector is not linked.
- MilloraCB Master: Increased RFID SPI communication speed and lowered RFID gain if noise is detected.
- MilloraCB Master: Code refactoring
-
- NouOCPP: Starting point for get composite schedule done.
- NouOCPP: Relative profiles are handled but only for Smart Charge profiles where connector id is bigger than 0.
- NouOCPP: Smart Charging Tx Profiles are now accepted.
- NouOCPP: In websocket connection, added "compression=None" since without it it doesn't work on latest Steve version.
- MilloraCB Master: Refactored serial and made some changes that improve flexibility. We can now have one connector with one type of measurer and the other connector with a different type of measurer.
- MilloraOCPP: Added next time check mechanism for Smart Charging so we check the next time any limit changes instead of every 30 seconds.
- MilloraOCPP: General Smart Charge improvements.
- CorreccióCB Master: Convert to positive the negative values read by Phoenix Contact measurer.
- CorreccióCB Master: Adjusted the precision of Phoenix Contact monophasic measurers.
- CorreccióCB N: Fixed bug provoked by changing local load balancing from v2c service.
- CorreccióOCPP: Change availability of Persistant Data handler is now async so that we can call it without blocking the execution of the ServerController.
- CorreccióOCPP: Fixed clear charging profiles.
- CorreccióOCPP: We handle decimal numbers on the Smart Charge profile's limit.
-
- NouCB N: Changes due to Smart Charging
- NouOCPP: Smart Charging starting point fininshed.
- NouOCPP: Smart Charging configuration keys are handled.
- NouOCPP: Smart Charging profiles can be added and will be validated and can also be deleted.
- CorreccióOCPP, CB N and CB Master: Fixed bug when locked was modified and ocpp was activated but chargepoint isn't connected to any central system.
- CorreccióCB Master: Fixed bug when OCPP charge is started where if connector 1 was charging, connector 0 couldn't start a charge.
- CorreccióCB Master: Prevent crash in the case that .versions folder doesn't exist.
- CorreccióCB Master: Register cards are now added to card cache.
-
- NouPole: Screen now shows when user passes a non registered RFID card.
- MilloraCB Master: Improvements in update process.
- MilloraCB Master: Changes so that screen indicates when a non registered RFID card is passed.
- MilloraCB N: Improvements in update process.
- MilloraOCPP: GetConfigurationKeys now returns unknown keys and we handle SupportedFileTransferProtocols key.
- MilloraPole: Romanian identifier moved to position 6 to maintain order language with Trydan.
-
- MilloraCB Master: We store RFID cards in cache.
- MilloraCB N: RFID reader improvements. Case where two connectors are plugged in and a card is passed.
- MilloraCB N: New communication method so that CB master can obtain RFID cards.
- EliminatCB Master: We don't send wifi_info in report anymore and we have removed functions related to wifi_info.
- EliminatCB N: We don't send wifi_info in report anymore.
-
- NouCB N: Static IP configuration through access point.
- MilloraCB Master: Improvement in connect/disconnect logic. Disconnection is less rigid and we increased network check from 5 seconds to 15 seconds.
- MilloraCB Master: Increased RFID reader antenna gain.
- MilloraCB N: When charger reconnects, it will only send report if a property has changed.
- MilloraCB N: Properties are now only reported when they have changed from previous value.
- CorreccióCB Master: CWe fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- CorreccióCB N: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- CorreccióOCPP: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
-
- MilloraCB Master: Safeguard so that it doesn't fail when there's a missing network card and we try to obtain data usage.
- MilloraOCPP: Removed range validation from measurer.
- ActualitzatCB Master: Removed range validation from measurer for Carlo Gavazzi and Phoenix Contact measurers.
- CorreccióCB Master: Fixed energy by hour bug.
-
- MilloraCB N: We show in log if i2c reconnects.
-
- NouCB Master: Chargebox Cache now stores state of connectivity with V2C service to show it on the screen.
- NouCB N: Chargebox Cache now stores state of connectivity with V2C service.
- NouPole: The screen now shows a cloud icon to indicate connectivity to our cloud.
- MilloraCB Master: Adjustment in measurer so that it can handle int32 represented as uint.
- MilloraCB N: Log improvements to not show get_has_internet_connection y and reduce error messages generated when i2c is not working.
- MilloraCB N: Changes to reduce calls to has_internet_connection to consume less data.
- MilloraOCPP: We log exception names since sometimes exception errors return empty string.
- MilloraOCPP: We capture error if there's an error when sending heartbeat.
- MilloraOCPP: We change client controller so that it's the same as CB N and CB Master.
- CorreccióCB N: Seconds of timeout now return 0 instead of None if not set.
-
- MilloraCB Master: Master now sends the balanced intensity when it changes.
- MilloraCB N: Changed order of what happens when configuration is changed. We first update the value, then we report the changes to Azure and finally we set the cache.
- MilloraCB N: CB Master now sends balanced intensity instead of CB N probing for change.
- CorreccióCB Master: Fixed error where RFID stops charge while the other connector is enabled.
- CorreccióCB Master: Fixed error where RFID card is passed and both connectors have a car plugged in.
- CorreccióCB N: Fixed bug where changing local load balancing set both connector intensities to 16.
-
- MilloraCB Master: Change in log system to not show repeated logs.
- MilloraCB Master: Shared properties are now set in the other connector if they are different on startup.
- MilloraCB Master: Completely decoupled OCPP from CB N and get_ocpp_config function fixed.
- MilloraCB Master: Network state is now sent when changed instead of being probed every 30 seconds.
- MilloraCB N: General improvements of communication between modules and cache.
- MilloraCB N: Improved stability related with missing configuration.
- MilloraCB N: Change in log system to not show repeated logs.
- MilloraCB N: Fixed problem where Chargebox loop would destroy RFID state.
- MilloraCB N: Fixed OCPP ConnectionTimeout.
- MilloraCB N: Completely decoupled OCPP from CB N
- MilloraCB N: Network state is now sent when changed instead of being probed every 30 seconds.
- MilloraCB N: We only change repository hash if it's different than the current one.
- MilloraCB N: Updating checks if charger is updated or not and only changes version after it has been updated.
- MilloraCB N: General improvements of communication between modules.
- MilloraOCPP: Improved Client Controller traceability.
-
- MilloraCB Master: Created Cache to decrease the number of requests and communication between modules.
- MilloraCB Master: Fixed network reset problem.
- MilloraCB Master: Changes so that Pole can receive all the information it needs in one call.
- MilloraCB Master: Changes dues to how the measures are now sent.
- MilloraCB Master: General access point improvements.
- MilloraCB Master: Improvements due to changes in module communication.
- MilloraCB N: Created singletons are now thread safe.
- MilloraCB N: Server Controller is now executed sooner due to being fundamental in correct functioning.
- MilloraCB N: Changes to take into account CB Master's cache
- MilloraCB N: Changed way we obtain measures to perform less requests with Client Controller.
- MilloraCB N: Improvements due to changes in module communication.
- MilloraOCPP: Created singletons are now thread safe.
- MilloraOCPP: Completely decoupled from CB N and now only communicates with CB Master.
- MilloraOCPP: Simplified communication between modules.
- MilloraOCPP: Improvements due to changes in module communication.
- MilloraPole: Created singletons are now thread safe.
- MilloraPole: Completely decoupled CB N and we obtain all information needed in one call to CB Master.
- MilloraPole: Improvements due to changes in module communication.
-
- MilloraCB Master: The charger now limits the number of messages that appear in the case that there's a range validation fail of a measure.
- MilloraCB N: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- MilloraCB N: Restart Server Controller mechanism.
- MilloraOCPP: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- MilloraOCPP: Restart async Server Controller mechanism.
- MilloraPole: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- CorreccióOCPP: If there's an error handling a request, we won't add it to the offline queue.
- CorreccióOCPP: Include thread and sys libraries.
-
- MilloraCB N: When rebooting, we check module communication server.
- MilloraCB N: Decoupled concept of connector id and measurer address.
- MilloraCB Master: When rebooting, we check module communication server.
- MilloraCB Master: Decoupled concept of connector id and measurer address.
- MilloraCB Master: Fixed error in Phoenix Contact measurer.
- MilloraPole: ZMQ integrated to improve communication.
-
- MilloraPole: Improvement to let the user know when to connect the vehicle.
- MilloraPole: Screen now reflects if charger has only one connector.
- MilloraCB Master: Changed SSID format so that it's the same as Trydan's format.
-
- MilloraOCPP: Added measurer range validation.
- MilloraCB Master: Added measurer range validation.
- ActualitzatOCPP: AuthorizeRemoteTxRequests is now a read and write configuration key.
- CorreccióOCPP: Fixed problem with repeated logs.
- CorreccióCB Master: Fixed problem with repeated logs.
- CorreccióCB N: Fixed problem with repeated logs.
-
- MilloraCB N: Handled special case of change intensity.
-
- NouCB Master: Access point logic fininshed.
- NouOCPP: Data validation when configuration is changed.
- NouOCPP: Charger can now handle multiple transactions offline.
- MilloraCB N: If OCPP is on, we disable payment mode.
-
- MilloraOCPP: Reset function improved. Corresponding Status Notification is sent.
-
- MilloraCB N: General stability improvements.
- MilloraCB N: Changed payment method approach.
- MilloraCB Master: Changed payment method approach.
- MilloraCB Master: Improved robustness in the case the access point software is not installed.
- MilloraPole: Improvements due to payment method.
-
- NouOCPP: Change availability validates connector.
- NouCB Master: Finished Access point.
- MilloraCB Master: Changed compressed file formats from gzip to gz
- MilloraCB Master: Force backup when restarting.
-
- NouCB N: Allow to change intensity, when i2c is failing.
- NouCB Master: Implemented most of the access point server functionalities.
- CorreccióCB Master: Fixed OCPP measurer error that ocurred when all selected measures in Meter Values returned 0.
- 1.4.3NouCB Master: Initial version of the access point server.
-
- MilloraCB N: Changes to improve Pole software.
- MilloraPole: Changes to simplify view logic.
- CorreccióCB Master: If payment mode is active, charger won't allow to charge with RFID card.
- CorreccióPole: Removed sourceMappingUrl to prevent 404 error when there's no internet.
- 1.4.1CorreccióCB N: Payment mode changed since payload format for server has changed.
- 1.4.0NouPole: Changes in screen software that reflects payment mode, blocking connectors and OCPP.
-
- CorreccióOCPP: Charger won't send Authorize if passed RFID card is already used in a transaction.
- 1.3.23MilloraOCPP: We store RFID cards in lower caps to improve robustness.
-
- MilloraOCPP: Improved robustness of RFID cards stored in the Local Authorization list.
-
- MilloraOCPP: Improved Local Authorization logic.
-
- CorreccióCB Master: Fixed wifilist sending format.
-
- NouCB N: We report information regarding wifi_info. Direct method to ask for the SSIDs the raspberry pi detects.
- 1.3.18MilloraOCPP: Improved authorization cache handler.
-
- MilloraOCPP: Improved handling of measurer values.
-
- MilloraOCPP: Improved handling of configuration keys.
-
- ActualitzatCB N: Payment mode with duration and timers.
-
- MilloraOCPP: Improved MeterValues handler.
- 1.3.13NouOCPP: Finished Local Authorization List profile.
- 1.3.12MilloraOCPP: Log Improvements.
- 1.3.11CorreccióOCPP: Fixed bug that wouldn't send Authorize Request when passing the RFID card.
-
- NouOCPP: Basic implementation of OCPP profiles: FirmwareManagement, LocalAuthListManagement, Reservation and SmartCharging.
- 1.3.9MilloraCB Master: Fixed RFID card reading with Wiegand reader for cards that have a 0 on the left side. Example of cards that failed: 32:0a:2c:23, 41:00:32:12.
-
- ActualitzatOCPP: Availability isn't managed by OCPP anymore. It is handled exclusively by property locked.
- 1.3.7MilloraCB N: If charger is blocked, led blinks won't be sent.
- 1.3.6NouCB N: Payment Mode finished with start and stop.
- 1.3.5MilloraOCPP: Clear Cache can only be performed when all connectors are in the OCPP state Available.
-
- MilloraOCPP: Changes so that availability can be changed from CB N.
-
- MilloraCB Master: OCPP module can now ask for Status Notification.
- ActualitzatOCPP: The charger the different possible OCPP states in the Status Notification.
- 1.3.2MilloraOCPP: We can now set configuration parameters for safeguard.
- 1.3.1MilloraOCPP: Change availability is now completely functional. It changes to inoperative during a charge and availability changes the locked value.
- 1.3.0CorreccióOCPP: Changed way we obtain measurer data for OCPP.
- 1.2.0CorreccióOCPP: Temporary fix for Place to plug since OCPP library can't handle unknown keys.
- 1.1.0CorreccióOCPP: Fixed _available_connectors error.
-
- NouOCPP.
- NouScreen.
- NouPole.
- NouCB Master.
- NouCB N.
App V2C Cloud
Versió actual 3.3.2 · 30 versions des de febrer de 2023
- NouNou mode fosc propi de l'aplicació: totes les pantalles s'adapten correctament al mode fosc del mòbil.
- NouNova pantalla d'Aparença (Ajustos > Dades d'usuari > Aparença) per triar entre mode Automàtic (segueix el mòbil), Clar o Fosc.
- NouNou lector de codis QR i de barres, més ràpid i fiable, per identificar l'e-Charger a Payments i durant l'aparellament.
- NouMissatges d'error més clars en iniciar sessió de manera incorrecta.
- MilloraArrencada més neta de l'aplicació, sense el parpadeig en blanc inicial.
- MilloraCorregits els marges dobles i les barres grises a Android 14 i versions anteriors en sortir i tornar a l'aplicació.
- MilloraAplicació més lleugera: reducció important de la seua mida gràcies a l'optimització d'imatges i del codi a Android.
- CompatibilitatLa aplicació requereix ara Android 8.0 o superior.
- ActualitzatMode Sense injecció o aïllada en els perfils de càrrega: la potència mínima passa a ser de 300 W, ja que una descàrrega de bateries inferior és insuficient, amb un avís si s'introdueix un valor més baix.
- CorreccióCorregit un error pel qual els perfils de càrrega acabats de crear podien desaparèixer en actualitzar la pantalla principal.
- CorreccióCorregit el modal de càrrega programada (Clàssica i EcoCharging), que ara s'ajusta per mostrar tot el seu contingut sense necessitat de desplaçament.
Versions anteriors 29
-
- NouNou sistema de notificacions propi de V2C, més fiable, i sol·licitud del permís de notificacions a les versions recents d'Android.
- NouNous idiomes disponibles: polonès, lituà, xinès simplificat i txec.
- NouNova llista d'e-Chargers preferits a Payments: desa els teus e-Chargers habituals amb el nom que vulguis per iniciar una càrrega en un sol pas.
- NouEls e-Chargers V2C que apareixen al mapa ja permeten iniciar la càrrega directament a través de V2C Payments.
- NouEs possible filtrar per e-Chargers de V2C al mapa.
- NouNous inversors compatibles amb el control dinàmic: SolPlanet, Hoymiles i Huawei amb connexió WiFi directa (disponible per a Trydan versió 2.5.2 o superior).
- NouGestió de la bateria domèstica ampliada a més inversors: Sigenergy (des de la versió 2.5.1), i GoodWe, SolarEdge i SolPlanet (des de la versió 2.5.2).
- NouNou avís al Pole Pro quan el mesurador de la maneguera no respon (Error 3), disponible a partir de la versió 6.1.0.
- NouNova explicació del funcionament del mode de càrrega mixta a Opcions especials.
- NouLa pantalla principal ara mostra el nom del perfil de càrrega que s'està utilitzant.
- NouLes estadístiques mostren ara correctament els costos negatius.
- NouEl botó de l'assistent virtual es pot desar a la vora de la pantalla i recuperar-lo quan calgui.
- NouNou missatge explicatiu en compartir un e-Charger amb un correu electrònic que no té compte a V2C.
- NouMillores visuals a tota l'aplicació: barres del sistema, marges superiors i adaptació als diferents models de mòbil.
- MilloraArrencada més ràpida de l'aplicació i menor consum de recursos.
- MilloraNou disseny del selector de dates a les estadístiques globals i de cada e-Charger.
- MilloraMajor estabilitat de la connexió Bluetooth, evitant bloquejos en connectar, en consultar la configuració de potència i en entrar a les opcions de l'e-Charger.
- MilloraMajor estabilitat de la sessió: s'eviten tancaments de sessió inesperats després de mantenir l'aplicació en segon pla durant molt de temps i bloquejos en iniciar sessió a l'iPhone.
- MilloraConfiguració de xarxa del Pole Pro més segura: validació de la xarxa WiFi i de la IP estàtica, l'APN no admet accents i es millora la presentació de la targeta SIM 4G.
- MilloraCorrecció dels noms i de la visualització de les tarifes, i nous colors per distingir millor els períodes en modificar la tarifa elèctrica.
- MilloraOptimització interna per reduir la mida de l'aplicació.
- ActualitzatV2C Payments: ara només l'administrador de l'e-Charger pot activar-lo, i en fer-ho se selecciona la ubicació del punt de recàrrega.
- ActualitzatV2C Payments: nou avís abans de continuar si l'e-Charger no té connexió a Internet o no permet carregar en aquest moment.
- ActualitzatLa prioritat de càrrega entre cotxe i bateria només es mostra quan la instal·lació disposa d'un inversor o del mesurador Huawei EMMA.
- ActualitzatCompatibilitat amb el nou format d'idioma dels darrers firmwares dels e-Chargers.
- CorreccióCorrecció del llistat d'estadístiques a l'iPhone, que podia mostrar-se retallat.
- CorreccióCorregida la potència mínima mostrada quan és inferior a 1 kW a Denka.
- CorreccióCorregit un avís de falta de connexió a Internet que es mostrava sense motiu.
- CorreccióCorregit un error en seleccionar models de cotxe el nom dels quals conté el símbol #.
- EliminatLa aplicació ja no sol·licita el permís d'ubicació en segon pla, ja que no és necessari.
-
- NouMillores a V2C Assistant: nova pantalla informativa per explicar millor el funcionament de l'assistent.
- NouMillores en Control dinàmic: els dispositius Shelly Pro també són compatibles amb V3.
- NouMillores en la configuració de bateries: millorada la interfície de l'opció que permet impedir que el carregador descarregui la bateria de la llar, fent-ne el funcionament més clar.
- NouNova compatibilitat amb Sigenergy: afegit Sigenergy com a inversor compatible amb el control de bateria en els perfils de càrrega.
- NouNou descobriment d'inversors Solarman: afegit un sistema per detectar automàticament els dispositius Solarman disponibles durant la configuració al Control dinàmic.
- NouDescobriment Solarman per Bluetooth i Wi-Fi: el nou sistema permet fer el descobriment utilitzant les connexions disponibles.
- NouMillores en la configuració de Solarman: els dispositius trobats es mostren individualment per facilitar-ne la selecció i la configuració.
- MilloraMillores en la càrrega programada: optimitzat el funcionament de l'indicador de temps durant les càrregues programades.
- MilloraNova gestió d'errors: millorat el comportament de determinades trucades de l'aplicació quan es produeixen errors d'estat.
- MilloraMillores a Oasys: optimitzada la persistència de les dades per conservar correctament la configuració.
- MilloraMillores en la gestió d'AutoCharge: actualitzat el nom i la presentació de la funció AutoCharge.
- MilloraMillores en compartir: afegida informació addicional a la pantalla de compartir per facilitar-ne la comprensió.
- MilloraMillores visuals en la descoberta Solarman: estats, animacions, missatges i confirmacions millorats durant el procés de cerca.
- MilloraMillores generals: l'aplicació s'ha optimitzat i s'han corregit diversos errors per oferir una experiència més estable.
- ActualitzatMillores en els perfils de càrrega: s'ha augmentat la potència màxima configurable fins a 12 kW en instal·lacions monofàsiques i 36 kW en instal·lacions trifàsiques, per facilitar la configuració als usuaris francesos.
- ActualitzatNova àrea de suport: accés a l'àrea de suport actualitzat.
- CorreccióMillores en compartir carregadors: s'ha corregit un problema que podia provocar errors en compartir un carregador.
- CorreccióMillores als mapes: S'ha afegit un token i s'ha actualitzat l'accés utilitzat pels mapes per garantir-ne el correcte funcionament.
- CorreccióMillores en la configuració d'inversors: corregits diversos casos relacionats amb la configuració i la validació dels paràmetres de connexió.
- CorreccióMillores d'estabilitat: corregits diversos problemes detectats durant la revisió final, com ara el canvi de Tipus de càrrega en opcions especials, que no es feia correctament per Bluetooth.
-
- NouNova contrasenya per a OCPP a les opcions avançades per a una configuració més segura.
- NouNou avís quan no es concedeix el permís d'ubicació, per facilitar la configuració del dispositiu.
- NouNou recordatori al xatbot per permetre el moviment quan sigui necessari.
- NouMés estabilitat en l'autenticació, evitant sol·licituds simultànies del token i millorant-ne la gestió interna.
- NouS'ha afegit un temps d'espera de seguretat en l'obtenció del token per evitar bloquejos en casos excepcionals.
- NouNova guia de configuració de Sigenergy mitjançant Modbus TCP per facilitar la posada en marxa de l'inversor.
- NouNou enllaç a la guia de configuració de Sigenergy en seleccionar aquest inversor al control dinàmic.
- NouCompatibilitat amb Sigenergy en el control dinàmic, identificant-lo correctament com a inversor.
- NouNous models compatibles d'inversors Azzurro i SofarSolar.
- NouNou avís per reiniciar l'Alva quan sigui necessari per completar correctament la configuració.
- NouMissatges d'error de Bluetooth més precisos quan no és possible connectar amb el carregador.
- NouNous models d'inversors Ingeteam i validació de les dades de connexió per facilitar-ne la configuració.
- NouSelecció de Tipus de càrrega disponible a Opcions especials (Disponible per a Trydan versió 2.5.0 o superior).
- MilloraMillores en la connexió Bluetooth de l'Alva, amb una comunicació més ràpida i estable.
- MilloraEl chatbot ara ofereix recomanacions més útils, amb preguntes orientades a la teva configuració i situació.
- MilloraMillores en la configuració de smartphones i traducció dels textos relacionats amb l'aparellament.
- MilloraMillores en les traduccions al neerlandès per oferir una experiència més consistent.
- MilloraMajor control en l'enviament d'estadístiques en obtenir-les per bluetooth, evitant problemes quan les dades estan danyades o incompletes.
- MilloraOptimització interna de l'aplicació per reduir-ne la mida i millorar la compatibilitat amb les darreres recomanacions d'Android.
- MilloraMillora en la sensibilitat dels perfils de càrrega per evitar modificar el tram en fer clic.
- MilloraMillora per modificar les hores dels perfils de càrrega de manera precisa si es desitja.
- MilloraMillora en la gestió de les dades del control dinàmic de l'Alva, corregint errors durant la seva consulta.
- MilloraMillor robustesa en sincronitzar l'hora per Bluetooth del Trydan.
- ActualitzatS'ha actualitzat el missatge de prioritat de càrrega de bateries als perfils de càrrega per fer-lo més clar.
- CorreccióMés precisió en alguns controls lliscants, corregint l'enviament de dades en prémer-los directament.
- CorreccióCorrecció d'una targeta buida a les opcions especials.
-
- NouMostrar prioritzar la càrrega de la bateria de la llar en els perfils de càrrega (versió igual o superior a la 2.5.0).
- NouAfegir informació detallada sobre la prioritat de les bateries en perfils de càrrega.
- NouAfegit EMMA com a inversor compatible amb evitar la descàrrega de bateries.
- NouPreu per inactivitat afegit a Payments.
- NouAfegida adreça COM al mesurador EMMA.
- NouEnviament de tipus de connexió a l'Alva.
- CorreccióArreglat un error en obrir les finestres emergents.
-
- NouAfegit xatbot integrat amb IA.
- NouAfegit registre de finalització de càrrega a Opcions especials per als Trydan (versió igual o superior a la 2.5.0).
- NouAfegida nova tarifa personalitzada per períodes.
- NouDades dels gràfics d'Oasys mostrades com a la web.
- NouNou camp "Nivell de bateria" afegit al gràfic d'Oasys.
- NouAfegit un buscador per quan un usuari té molts carregadors (més de 10).
- NouPaginació per a l'obtenció de grans quantitats de targetes i eKeys per Bluetooth.
- NouEl missatge de límit d'intensitat màxima de càrrega dels connectors per a Alvas serà de 640 A a causa de tenir dues preses.
- NouMillores en el disseny RFID, paginació, motor de cerca i diferenciació per tipus.
- NouMostrar el número de versió a la qual s'actualitzarà el firmware.
- NouComprovació del permís de Bluetooth habilitat i avís a l'usuari.
- NouMissatge d'intensitat limitada a la pantalla per als models de 16 amperes.
- NouChint disponible en versió per a Denka i Pole.
- NouNou GIF afegit per reflectir la descàrrega de la bateria i la producció fotovoltaica.
- MilloraNova UX millorada per als perfils de càrrega.
- MilloraMillora en la UX de la pantalla Tarifa energètica, per a les tarifes personalitzades.
- MilloraMillora i optimització de les crides realitzades durant una transacció de Payments.
- MilloraMillores generals del Bluetooth.
- MilloraMillora del disseny de la pantalla de Gestió d'usuaris i de la possibilitat que l'administrador elimini el carregador des d'allà.
- MilloraCorrent de càrrega màxima dels connectors limitada i millora de l'experiència d'usuari.
- CorreccióEvitar valors negatius als gràfics d'Oasys.
- CorreccióArreglat colors incongruents en els gràfics d'Oasys.
- CorreccióMillora de l'UX del botó en canviar la contrasenya per evitar múltiples clics.
- CorreccióMillor velocitat d'inici de l'aplicació en accedir sense cobertura de xarxa.
-
- NouAvís de gestió de descàrrega de bateria per a Ingeteam a la seva aplicació externa.
- NouEl administrador pot veure si el carregador està sent gestionat per un instal·lador. La resta d'usuaris poden veure qui és l'administrador.
- NouNova etiqueta a les dades de capacitat.
- NouS'han afegit explicacions detallades a tots els camps de la bateria.
- NouActualització a la versió 2.5.0 per incloure compatibilitat amb la descàrrega de la bateria.
- NouSe han afegit alertes de precaució per advertir l'usuari que tingui cura en prémer determinades funcions sensibles.
- NouS'ha afegit la gestió de la xarxa elèctrica a la configuració d'Oasys.
- MilloraMillora en totes les pantalles d'Oasys
- MilloraMillores a l'aplicació (v2c): S'ha afegit la tarifa energètica a Oasys.
- ActualitzatValidació de la longitud dels RFID i de les eKeys (com a mínim 3 caràcters).
- ActualitzatIngeteam i EMMA s'han ocultat de la llista d'inversors compatibles amb la descàrrega de la bateria.
- CorreccióS'ha corregit un error en mostrar el missatge "Evitar descàrrega de la bateria".
- CorreccióEs van corregir un error en desar la configuració amb l'inversor Goodwe.
- CorreccióS'ha corregit un error en executar el mètode principal en un bucle fins i tot en sortir de la pantalla.
- CorreccióSe ha solucionat el límit de potència a Denka (ocult, però finalitzat).
- CorreccióS'ha amagat permanentment la intensitat en els pagaments a la pantalla.
- CorreccióS'ha resolt una possible vulnerabilitat de seguretat.
-
- NouEs indica que hi ha una càrrega en curs a les estadístiques.
- NouAra apareix el nom de les targetes RFID a les estadístiques.
- NouPantalles principals de bateries acabades i amb dades reals.
- NouAfegit un checkbox per evitar la descàrrega de bateries a partir de la versió 2.4.7 per a alguns inversors
- MilloraMajor robustesa en la visualització de l'actualització de firmware (només apareixerà l'opció d'actualitzar si la versió actual és estrictament inferior a l'última que hi ha estable en producció).
- ActualitzatPermetre que els editors modifiquin la tarifa energètica.
- CorreccióCorregit error en el GIF sense FV.
-
- NouSeparació d'inversors Azurro i Sofar Solar.
- NouLa prevenció d'afegir codis massa llargs en RFID o eKeys i la millora de l'experiència d'usuari.
- NouNou inversor Azurro.
- NouMillora de la fluïdesa als menús del mapa.
- NouAugment de la mida dels modals per millorar la visualització de dades.
- NouNou disseny millorat d'estadístiques.
- NouAfegit nou mesurador Huawei EMMA.
- NouCanvi de nom del tipus d'inversor a Sunny SMA.
- NouAfegida matrícula del vehicle.
- NouAfegit el tipus de fotovoltaica utilitzada dels seus perfils de càrrega en cada moment al GIF
- NouPaginació completada per a RFID a Denka i Pole Pro
- NouNous tipus de Fronius limitats a versions superiors a la 2.4.2
- MilloraMillora en la visualització dels detalls del vehicle elèctric.
- MilloraMillora en les traduccions a l'italià.
- MilloraMillora general de les traduccions.
- MilloraMillores d'usabilitat i reposicionament de botons a EcoCharging
- MilloraMillora en el mostreig de dades de Payments
- CorreccióCorregida la comprovació de l'estat d'autocharge (no hauria de realitzar-se en aquest cas).
- CorreccióCorregit l'error a les dades del vehicle elèctric.
- CorreccióActualització de l'endpoint de token a tota l'aplicació.
- CorreccióCorregit un error a la pantalla d'opcions amb adreces MAC als Pole.
- CorreccióMillora de la compatibilitat amb dispositius de pantalla gran.
- CorreccióAjustaments de safe-area a iOS.
- CorreccióCorregit un problema d'extrem a extrem a Android 15.
- CorreccióActualització d'APIs d'extrem a extrem obsoletes.
- CorreccióAfegides safe-areas per evitar solapaments amb les barres del sistema.
- CorreccióCorregida una vulnerabilitat crítica de seguretat a Android.
- CorreccióAmagat l'objectiu de càrrega si no té la versió que toca (2.4.3)
- CorreccióCorregit un error en intentar actualitzar el firmware per wifi local.
-
- NouAfegida informació sobre el cost durant la càrrega per a usuaris amb fotovoltaica.
- NouCanvi de token de Mapbox per a la cerca al mapa.
- MilloraConnexió per Bluetooth accelerada.
- MilloraMillora en el disseny de l'aparellament BLE.
- MilloraRefactorització
- MilloraOptimització de la connectivitat Bluetooth a iOS.
- MilloraMillora de les traduccions per context en tots els idiomes.
- ActualitzatCanvi a la ubicació de V2C Business Panel, ara a la configuració principal.
- CorreccióBug corregit en configurar el V2C Business Panel.
- CorreccióArreglat un error al checkbox de l'objectiu de càrrega.
- CorreccióArreglat un error a la pantalla RFID/eKeys per als ALVA.
- CorreccióArreglat l'error de solapament dels menús del mapa amb el notch als iPhones.
- EliminatAmagada l'actualització de l'esclau
-
- NouWidget acabat i funcional a Android i iOS.
- NouAfegit chatbot amb IA per a les preguntes freqüents.
- NouExplicació i avís per al comptador Linky.
- NouNous protocols per a inversor Goodwe.
- NouNous enllaços dels nous «Vídeos informatius».
- NouNova pantalla per aparellar carregadors per proximitat Bluetooth.
- NouNova pantalla per configurar el fus horari.
- NouAfegit Alva al catàleg de models
- NouNova opció per vincular el teu e-Charger amb una empresa.
- NouDos nous subtipus per a l'inversor Fronius.
- NouNova tarifa per a França: Tempo EDF
- MilloraMillor disseny UX per a la càrrega programada clàssica.
- MilloraMillora en l'enviament de dades i dels avisos del control dinàmic.
- MilloraRefactorització de part del codi.
- MilloraMillora d'algunes etiquetes incorrectes en tots els idiomes.
- MilloraMillora en mostrar l'avís de botó d'emergència premut a les Denkas.
- MilloraMillora en mostrar errors més concrets en compartir carregador.
- ActualitzatActualització de llibreries a iOS.
- ActualitzatNou disseny per afegir informació del teu vehicle elèctric
- CorreccióLes estadístiques prenen com a referència la data d'inici, perquè apareguin dins d'un interval de temps.
- CorreccióCorregit un error en Pole i Pole Pro en iOS en deixar el SSID buit.
- CorreccióTraduccions a l'alemany corregides.
- CorreccióSolucionat el bug que hi havia al mapa als iPhones.
- CorreccióArreglat un error en la visualització del cost a les estadístiques.
-
- NouAfegit avís de botó d'emergència activat a Denka.
- NouFunció Autocharge: Llista de vehicles autoritzats per a Denka.
- NouNou flux a l'esquema de fotovoltaica.
- NouCompartir el cargador directament per correu electrònic.
- NouMillora en els registres de pujada manual d'estadístiques.
- MilloraMillora de l'esquelet de càrrega a la pantalla principal
- MilloraMillor explicació de la intensitat per fase
- MilloraMillora de les traduccions a l'italià
- MilloraEliminada la restricció d'orientació per a una major compatibilitat amb algunes tauletes
- ActualitzatActualització de llibreries
- ActualitzatLlibreria de Firebase actualitzada per a major seguretat.
- ActualitzatOrdre correcte de les propietats de la configuració de la IP estàtica.
- CorreccióCorrecció d'un error en actualitzar EcoCharging amb un temps específic
-
- NouAfegit tipus G2 a l'inversor Goodwe
- NouAfegida limitació de càrrega en Denkas
- NouMostra de la capacitat de la bateria del cotxe a Denka.
- NouTemps restant de càrrega a Denka
- MilloraMés espai al menú inferior per a alguns dispositius
- MilloraMillora de la vista del menú inferior per a usuaris amb una mida de lletra molt gran
- ActualitzatCanvis en el tipus d'inversor Solis
- ActualitzatCanvi en la mostra d'estadístiques: tinc en compte el endCharge com el servidor
- ActualitzatCanvi en les crides al servidor, sense la barra al final
- ActualitzatAmagat el mode despertar
- ActualitzatAmagat el tipus «Registres comuns» a l'inversor DEYE
- ActualitzatGPS no és un requisit indispensable per descarregar l'app.
- ActualitzatJa no cal indicar la zona de l'usuari a la configuració del vehicle elèctric
- CorreccióCorregit un error en obtenir dades a Opcions especials
- CorreccióResolució de bugs menors
-
- NouPermetre recarregar les dades de la targeta SIM sense l'e-Charger connectat
- NouNous missatges d'advertència en funcions delicades
- MilloraMillora general de l'estabilitat
- ActualitzatCanvi en el nom de la propietat per term_resistor
- CorreccióEl menú inferior ja no se sobreposa a la informació
-
- MilloraMillora total de les traduccions al portuguès
- MilloraMillora total de traduccions en Francès
- MilloraMillora parcial de traduccions en alemany
- CorreccióSolucionat l'error en modificar la potència dels Denka
- CorreccióMajor control d'errors al mapa
-
- NouMapa de fases adaptat per a Trydan
- NouPermet que els dispositius secundaris canviïn la intensitat màxima i mínima
- NouRestricció d'accés als perfils de càrrega per a carregadors no mestres, i separació dels límits d'intensitat
- NouCanvi i avís per a tipus d'inversors DEYE
- NouAfegida vista de la resistència de terminació del BUS en el control dinàmic
- NouMillorada la càrrega de dades a la pantalla de xarxa
- NouEquilibratge local Trydan, mostra l'estat de la resistència de terminació BUS
- NouMillor robustesa en l'enviament d'estadístiques per Bluetooth
- NouNova pantalla d'inici (splash screen) configurada i optimitzada
- NouMillora en el reinici de l'app sense tancar-la completament, nous dissenys finalitzats amb pantalla de fons personalitzable
- NouNova lògica a la pantalla principal del dispositiu
- NouNou disseny de càrrega de dades a la pantalla principal
- NouFinalitzat el filtre per proveïdors
- NouAfegits skeletons (Càrrega de dades moderna) a les pantalles principals
- NouNoves crides al servidor, agrupació de transaccions i paginació
- NouNoves crides al servidor, llistat i descàrrega de factures per tipus
- NouS'ha afegit un rellotge al costat de l'hora a les estadístiques, canvi de € a símbol de moneda general, i ara hi ha el llistat d'estadístiques a les estadístiques generals.
- NouNou tipus a DEYE i afegit nou comptador Linky
- NouApp traduïda al basc i refactoritzada per facilitar la incorporació de nous idiomes
- NouAfegides noves tarifes energètiques
- NouAfegida nova pantalla per confirmar pagaments gratuïts
- NouAfegit un altre tipus per a l'inversor Goodwe
- NouAvís al missatge de reiniciar e-Charger
- NouNoves tarifes calculen correctament el seu preu a la pantalla de càrrega
- MilloraMillores de disseny i millores en totes les pantalles d'iPhone amb Dynamic Island
- MilloraMillores en la visualització d'estadístiques
- MilloraMillorada la visualització d'estadístiques en rangs llargs de temps
- MilloraMillora en els esquelets
- MilloraInversors i comptadors ordenats alfabèticament
- MilloraPreu d'estalvi EcoCharging ben situat i possibilitat de reprendre en qualsevol estat
- MilloraMillores a la pantalla principal del dispositiu
- MilloraMillores en LetMeCharge
- ActualitzatRefactorització de les pantalles principals
- ActualitzatEnviament de la capacitat de la bateria com a nombre en lloc de cadena de text
- ActualitzatCanviades les crides de transaccions al servidor per les noves
- CorreccióAmagar tipus de modificació Portugal
- CorreccióCorregits els límits d'intensitat a la pantalla principal i redissenyada/refactoritzada la pantalla d'ajustaments
- CorreccióCorregit el tipus d'entrada numèrica en alguns camps on es podia introduir text
- CorreccióCorregit un error en seleccionar perfils de càrrega: sempre començava en "dies feiners".
- CorreccióCorregit l'error al GIF fotovoltaic
- CorreccióCorrecció en l'actualització del token
- CorreccióCorregit un error en mostrar la versió del firmware
- CorreccióCorregit un error en canviar la memòria cau
- CorreccióNo mostrar el bloqueig si el carregador no està connectat (Wi-Fi o Bluetooth) i corregit l'error en mostrar el nivell de potència
- CorreccióEvitar bloqueig de pantalla per connexió a Internet a les estadístiques
- CorreccióCorregit un error en mostrar les estadístiques
- CorreccióCorregit error al control dinàmic, IP indefinida
- CorreccióCorregits errors menors
- EliminatEliminació de pantalles no utilitzades
- EliminatEliminada la vora de les targetes
- EliminatEliminats elements innecessaris
- EliminatEliminat el límit de corrent per fase quan el carregador és monofàsic
-
- NouNous permisos i restriccions segons el model de l'e-Charger i el rol de l'usuari
- NouLímit de potència màxima i mínima a Denka
- NouAnimació sense carregadors adaptada al nou disseny
- NouNou control dinàmic per a Trydans amb versió superior a la 2.3.0
- NouAfegit mapa (Estarà disponible molt aviat)
- NouNou disseny amb menú inferior
- MilloraRefactorització de codi per a un millor manteniment
- MilloraMillora de la reconnexió entre pantalles principals
-
- ActualitzatActualització del SDK a iOS per poder publicar.
- CorreccióCorregit l'error en la creació del pla d'EcoCharging.
- CorreccióArreglat el tamany de lletra en algunes pantalles.
- CorreccióArreglat el error en seleccionar el control estàtic al Pole Pro.
- CorreccióArreglat un error en demanar la ubicació a Android 14.
- EliminatEsborrat total de l'app de l'equilibri entre preses (ara s'inclou en el funcionament del control dinàmic).
-
- NouNúmero de sèrie afegit a l'inversor Enphase.
- NouGràfic d'estadístiques afegit a EcoCharging.
- NouRefactorització de l'aplicació i nova manera de mostrar el control dinàmic segons la versió i el model de l'e-Charger.
- NouIncorporació de l'idioma italià a Pole Pro.
- NouEls copropietaris poden editar la seva targeta de crèdit.
- NouNo permetre configurar perfils de càrrega en un dispositiu que no sigui Mestre.
- MilloraTrucades Bluetooth millorades per a Pole Pro.
- MilloraMés robustesa en obtenir estadístiques per Bluetooth.
- MilloraRefactorització de les crides al servidor.
- MilloraMillora de traduccions.
- MilloraMés robustesa en canviar una càrrega programada.
- MilloraMillora de velocitat a l'inici de l'aplicació.
- MilloraMillores a la pantalla de configuració de connexió.
- CorreccióArreglat la descàrrega de factures en PDF.
- CorreccióError corregit de pantalla en blanc en configurar la connexió.
- CorreccióError corregit en actualitzar mitjançant wifi local.
- CorreccióInconsistència corregida amb OCPP: apareixia activat quan no ho estava per Bluetooth.
- CorreccióError corregit en mostrar el cost en gràfics amb estadístiques d'energia fotovoltaica.
- EliminatEliminació del balanceig entre preses en Poles, ara es balanceja automàticament des del control dinàmic.
-
- NouPermetre esborrar e-Charger si el Control Dinàmic Cloud està activat i no ets l'Administrador
- MilloraEvitar un exceso de llamades a la pantalla principal amb múltiples e-Chargers
- MilloraControlar errors en editar targetes RFID o clauers Bluetooth
- ActualitzatActualitzar la intensitat mínima del Denka a 1kW
- ActualitzatActualització de llibreries i millora d'optimització
- ActualitzatPermetre potències de més de 100 kW en els perfils de càrrega
- CorreccióCorregido un error al subir las estadísticas por Bluetooth
- CorreccióArreglat un error en obtenir les dades de Shelly Pro al control dinàmic
- CorreccióCorregido un error al añadir el primer perfil de carga por Bluetooth
- CorreccióCorregido un error al descargar facturas en cualquier móvil
- CorreccióArreglat l'error de pantalla en blanc en afegir un Pole
-
- NouNova funció, afegit «Mode despertar».
- NouDesactivar les notificacions si es tanca la sessió.
- MilloraMillora d'optimització, més velocitat.
- CorreccióCorregit un error en obtenir les estadístiques per Bluetooth amb la discriminació amb fotovoltaica.
- CorreccióS'ha corregit un error en actualitzar el reported quan es fan canvis en una propietat.
-
- NouEstadístiques mostren el cost aplicant la fotovoltaica i també es mostra l'estalvi
- NouPossibilitat de canviar la intensitat del LED
- NouPoder afegir una altra adreça COM per al comptador DDSU666-H
- NouAfegits tipus a l'inversor Fronius
- NouNou e-Charger Denka afegit
- NouNoves tarifes afegides (Indexada i OMIE)
- NouNoves propietats de l'e-Charger Denka afegides
- NouNous inversors afegits
- NouAvís d'EcoCharging activat
- NouAfegida vista del pla d'EcoCharging
- NouIntegració de funcions per a Denka
- NouAra les notificacions es diferencien per tipus i es poden seleccionar al gust de l'usuari.
- NouTraduccions de totes les pantalles noves.
- NouAlgunes opcions desactivades amb control dinàmic cloud activat.
- NouMissatge d'advertència en canviar la configuració OCPP.
- NouS'han afegit tipus a l'inversor Deye en el control dinàmic
- NouAfegit filtre per data a les transaccions.
- NouS'ha afegit un nou mesurador Shelly pro al control dinàmic.
- MilloraTraduccions al francès millorades.
- ActualitzatActualització de la versió a 2.2.7
- ActualitzatFormulari d'enviament de verificació de correu electrònic actualitzat
- ActualitzatCanvis en els textos per a 4G i Ethernet.
- CorreccióError corregit en visualitzar la càrrega de la bateria al gif
- CorreccióCorregit un error a la pantalla RFID que es quedava penjada, carregant infinitament.
- CorreccióModificat el text a les factures mensuals i solucionat el mes per defecte a les factures.
- CorreccióCorregit l'error que es produïa si el servidor fallava en sol·licitar el mac, i si el JSON fallava en sol·licitar el reported per Bluetooth.
-
- MilloraMillores en les traduccions
- CorreccióS'ha solucionat el problema del canvi d'hora en editar hores en perfils de càrrega
-
- NouS'han afegit els tipus a l'inversor Greenheiss i a l'inversor SAJ
- NouAfegit un ion-range a la selecció de potència dels perfils de càrrega
- NouNous tipus de connectivitat per a Trydan Pro (4G i Ethernet)
- NouAvís de reinici de l'e-Charger quan es configura el Wi-Fi
- NouRefresc d'estadístiques per a una major robustesa
- NouAmpliació de temps per afegir una e-Key per a més fiabilitat
- MilloraMillora de les traduccions
- MilloraMillora en els missatges a l'usuari als e-Keys
- ActualitzatTargetes RFID i e-Keys es poden afegir, editar i esborrar sense necessitat d'activar-les
- CorreccióArreglat un error pel qual no apareixia l'hora programada al Pole Pro
- CorreccióCorregit l'error de la zona horària en els perfils de càrrega (es produïa principalment a Portugal).
-
- NouCreada nova pantalla emergent de tutorial per quan sigui necessari explicar alguna cosa a l'usuari amb més detall.
- NouControl d'errors en els perfils de càrrega per avisar l'usuari si alguna cosa no s'ha desat correctament.
- NouFotovoltaica agregada als perfils de càrrega per a Pole Pro.
- NouMillora de la localització del Bluetooth en alguns telèfons i mostrem un error si falla la connexió Bluetooth
- NouAfegits els tipus COM 1 i COM 11 al mesurador Huawei Chint al control dinàmic.
- NouS'ha amagat el gif de fotovoltaica per als Poles Pro.
- NouDisponible la possibilitat d'afegir una adreça COM lliure per a l'inversor Huawei.
- NouAfegida la possibilitat de configurar una IP estàtica per a Pole Pro.
- NouS'ha afegit un nou missatge al GIF quan no hi hagi producció fotovoltaica.
- NouNgà afegides noves traduccions.
- NouS'ha afegit informació per a l'usuari sobre la configuració de la IP estàtica a Pole Pro.
- NouS'ha afegit 'car topic' per configurar MQTT en el control dinàmic.
- MilloraMillora en el format dels diccionaris (Codi intern).
- MilloraMillora en el desament dels perfils de càrrega: ara ja no és possible desar perfils de càrrega amb més de 5 trams a través de Bluetooth.
- MilloraMillora del rendiment general de l'aplicació i optimització del codi.
- ActualitzatNou maneig de notificacions per dispositiu en lloc de per compte, i baixa de les mateixes en eliminar l'aparellament.
- ActualitzatCanvi de localStorage a sessionStorage a l'ID del Bluetooth per a una major solidesa de la connexió.
- ActualitzatCanvi de nom de 'Comptador V2C 2.0' per 'V2C ControlBox'.
- CorreccióArreglat error enviar usuari i contrasenya de MQTT en control dinàmic.
- CorreccióArreglat un error en mostrar les estadístiques que començaven a les 00:00.
- CorreccióCorregit un error en canviar d'idioma: de vegades no es mostrava el botó de desar.
- CorreccióArreglat el bug de l'enviament del tipus de Shelly en el control dinàmic.
-
- NouCompartir carregador disponible a "Gestió d'usuari".
- NouProcés V2C Payments s'obre en la mateixa aplicació per a un procés de pagament més còmode per a l'usuari. (No funciona si l'usuari té el Navegador MI com a predeterminat al seu mòbil, sí que funciona per a Google Chrome i Safari).
- NouAfegit avís a l'usuari per reprendre la càrrega si té V2C Payments activat.
- NouNous idiomes disponibles al Trydan.
- NouControl dinàmic de potència i perfils de càrrega disponibles al Pole Pro.
- NouAfegida compatibilitat de Trydan amb inversor Enphase.
- NouAfegida compatibilitat de Trydan amb comptador P1.
- NouAfegida compatibilitat de Trydan amb comptador Modbus feeder.
- NouAfegides noves configuracions addicionals per a MQTT.
- NouDiferenciació de tipus per a inversor Solis (amb o sense bateries).
- NouAfegit l'idioma romanès a Trydan.
- NouAfegida configuració del mapa de fases al Pole Pro a Opcions especials.
- NouImplementació de DeadLetters per al registre d'errors dels usuaris en segon pla.
- NouTrams de potència amb límit d'intensitat per a Pole Pro.
- NouAfegida opció sense mesurador en el control dinàmic de Pole Pro.
- NouAvisos importants en modificar el control dinàmic per millorar la UX.
- NouNova pantalla, llista d'esclaus disponibles per a Pole Pro quan actua com a Mestre.
- MilloraCàrrega més ràpida de la configuració estant offline.
- MilloraMillora important en l'estabilitat dels clauers Bluetooth, tant per WiFi com per Bluetooth.
- MilloraMillora en el disseny de les Opcions especials.
- MilloraMillora en la cerca i localització de Bluetooth a iOS.
- MilloraMillora en alguns mètodes Bluetooth.
- MilloraMillora de UX en modificar el nom de l'e-Charger.
- MilloraMillora l'estabilitat del Bluetooth al Pole Pro.
- ActualitzatCanvi de kW a W en la descàrrega de bateries.
- ActualitzatCanvi de 'Configuració control dinàmic' per 'Perfils de càrrega'.
- ActualitzatCanvi de nom: ara els clauers bluetooth es diuen e-Keys.
- ActualitzatIncrement del temps d'escaneig Bluetooth a la pantalla principal.
- CorreccióArreglat un error que es produïa en refrescar la pàgina quan no hi havia cap carregador.
- CorreccióCorregit un error en retrocedre amb el botó del mòbil en algunes pantalles.
- CorreccióActualització de la llista de targetes RFID o clauers en activar-los.
- CorreccióMillora de la visualització de les factures en anglès.
- CorreccióNo permetre esborrar l'e-Charger si l'usuari està offline.
- CorreccióPermet habilitar el carregador des de dins amb l'autobloqueig activat.
- EliminatEsborrat del missatge d'aparcament a V2C Payments quan l'aparcament és gratuït, per evitar confusions.
-
- NouAfegit mesurador alternatiu a SolarEdge al Control Dinàmic.
- NouAfegida confirmació abans d'actualitzar el firmware.
- NouMés i millors traduccions.
- NouControl d'errors a Payments.
- NouAfegida nova imatge de Google Home.
- MilloraMillora de la connectivitat i la recepció de les xarxes wifi a la pantalla inicial.
- MilloraPantalla de configuració sense connexió es carregarà més ràpidament.
- ActualitzatUnificar en una sola pantalla l'activació de targetes RFID i la seva edició. (El mateix per als clauers Bluetooth)
- ActualitzatCanvi tipus Huawei per Direcció COM.
- ActualitzatEnviar a la pantalla principal després de reiniciar el e-Charger.
- ActualitzatCanvio quan fem una transacció gratuïta a Payments.
- ActualitzatNo permetre modificar els pagaments si no disposes d'Internet.
- CorreccióS'ha solucionat l'error pel qual es preguntava pel tipus Huawei per a qualsevol comptador o inversor.
- CorreccióArreglat un error en mostrar les estadístiques de les recarregues fetes entre les 22:00 i les 00:00.
- CorreccióCorregit un error en néixer un nom de tram de potència buit.
- CorreccióArreglat el bug de Payments amb la tarifa gratuïta.
- CorreccióArreglat l'error amb el fus horari a les estadístiques.
- CorreccióAra fa poc he corregit petits errors.
-
- NouAra existeix un nou tipus de fotovoltaica en els trams de potència, anomenat «Sense injecció o aïllada».
- NouEls trams de potència es guarden al servidor i a la memòria cau per garantir un funcionament correcte en qualsevol dispositiu diferent i en qualsevol situació. (Amb internet, sense internet, amb Bluetooth, etc.)
- NouAfegits clauers Bluetooth per als Trydan.
- NouAfegits missatges informatius per a l'usuari per a una millor experiència d'ús.
- NouEl token només es demana una vegada cada minut o en entrar a l'aplicació, i es guarda a la memòria cau per a una major velocitat (abans es demanava amb cada crida HTTP).
- NouAfegida la possibilitat de reiniciar l'e-Charger a "Opcions especials".
- NouGoogle Home ja està disponible i s'ha afegit la informació corresponent a l'app.
- NouMés control d'errors en algunes publicacions per a una major transparència per a l'usuari.
- MilloraMillora en l'obtenció i la pujada de les estadístiques per Bluetooth.
- MilloraMillora de l'estabilitat d'algunes trucades Bluetooth
- MilloraMillorat el disseny de les pantalles de Payments.
- ActualitzatAl gif de la fotovoltaica no es mostrarà el valor si la dada és 0 o nul·la.
- ActualitzatSi l'idioma del dispositiu és basc, l'App es posarà per defecte en castellà (abans es posava en anglès).
- CorreccióArreglat el gif de la fotovoltaica que es quedava penjat en alguns dispositius iOS.
- CorreccióArranjament d'alguns errors menors.
-
- NouAfegida la IP a la informació WiFi.
- NouTenir en compte el cost de l'aparcament després de carregar a V2C Payments.
- NouExplicació IP estàtica Shelly.
- NouActualització en temps real de l'estat dels pagaments a la pantalla principal.
- NouNous inversors afegits.
- NouCanvi en les tarifes de l'inversor Shelly.
- MilloraMillorada la reconnexió de Bluetooth a la pantalla principal a iOS.
- MilloraDiferenciada la opció entre lliscar i fer clic per bloquejar el carregador.
- MilloraMillorada l'estabilitat del Bluetooth per a certes trucades que de vegades fallaven.
- ActualitzatBotó de pagaments sense carregadors més gran.
- ActualitzatCorregit el nou format QR.
- ActualitzatPoder modificar l'OCPP via Bluetooth al Trydan.
- ActualitzatCanvi en el disseny de la pantalla de V2C Payments
- CorreccióCorregides les notificacions push a iOS.
- CorreccióArreglat el problema amb l'inici de sessió de Google a iOS en compartir el carregador.
- CorreccióS'ha corregit l'error amb el format PVPC 2.
- CorreccióCorregit error en modificar tarifes.
- CorreccióS'ha corregit un error en la descàrrega de factures de pagaments.
-
- NouNous inversors afegits
- NouNou avís si s'han obtingut correctament les estadístiques per Bluetooth
- NouAra només s'obliga a utilitzar la localització amb el Bluetooth activat
- NouTenir en compte les bateries al GIF de la fotovoltaica
- MilloraMés consistència en l'enviament i la recepció de dades per Bluetooth
- MilloraNo deixar que l'usuari introdueixi un nom buit per a l'RFID ni noves traduccions.
- CorreccióArreglat l'obtenció d'estadístiques per Bluetooth
- CorreccióArreglat un error amb els GIFs de la fotovoltaica
- CorreccióArranjament de les notificacions
Portal web V2C Cloud
Versió actual 4.1.1 · 45 versions des de desembre de 2020
- NouActivate or deactivate the default rate for each e-Charger in Payments.
- NouEcocharging plan available for Oasys batteries.
- MilloraUpload your own invoices in the Invoices section of Payments.
Versions anteriors 44
-
- NouMandatory location for e-Chargers in Payments.
- NouMake the charger public from Payments so that it is visible on other platforms.
- NouAssign a different rate to each group in Payments.
- NouMonthly fee rate within Collective Charging.
- MilloraNew design for the Payments platform.
- 4.0.4MilloraNew way to configure the Ingeteam inverter.
-
- NouItalian tariffs.
- 4.0.2NouRates by periods.
- 4.0.1NouBattery prioritization in charging profiles.
-
- MilloraNew design of the portal v2c.cloud.
- MilloraSupport for viewing on mobile devices.
-
- NouNew Sofar Solar inverter.
-
- NouSelect time zone, manually or automatically.
- NouNew Huawei Emma inverter.
- NouNew Azzurro inverter.
- MilloraIncrease in code size on RFID cards.
-
- MilloraNew rates added.
-
- MilloraNew PDFs in Spanish and English in Payments.
- CorreccióCharging power limit on Denka.
-
- NouCharging stops upon reaching the selected percentage for Denka models.
- NouTPV icon.
- NouPossibility to see more chargers on the main page.
- NouCalculator in Payments rates.
- MilloraSelection of the auto-lock time for Trydan with version 2.3.25 or higher.
-
- MilloraChange in design when adding/modifying rates in Payments.
-
- CorreccióBug fixes in cloud installation.
-
- CorreccióFixing errors in RFID cards.
-
- NouCatalan language added.
- CorreccióBug fixes in the cloud power control.
- 3.2.12CorreccióFixing errors in power control profiles and in the meter list.
-
- ActualitzatImprovement in RFID cards to manually support 14 characters.
- 3.2.10CorreccióError fixing
-
- NouFiltering by status (online/offline) available for e-Chargers.
- MilloraVisualization of the e-Chargers version on the homepage.
- 3.2.8MilloraGrouping of types in Payments invoices.
-
- CorreccióFix when filtering date range in Payments and dashboard.
-
- MilloraIncrease in the maximum number of power control profiles.
-
- NouItalian language in Pole Pro.
- ActualitzatOptional OCPP customization properties in Pole Pro.
-
- MilloraCreation of more intuitive power profiles.
-
- MilloraImproved visual aspect when creating power profiles for cloud power control.
- ActualitzatGreater reduction in the cloud power control zoom and the option to reset zoom changed to center the installation.
-
- MilloraAbility to download statistics as a .xlsx file.
- CorreccióFixed various minor bugs.
-
- MilloraAdded a waiting indicator when saving an installation in cloud power control.
- ActualitzatModified text and color according to the state of the e-Charger in cloud power control.
- CorreccióImages of e-Chargers in installation view in cloud power control.
-
- NouRight-click menu in cloud power control.
- NouSelect, copy, paste, duplicate, and delete multiple elements in cloud power control.
- MilloraMove and zoom in on an installation with the mouse wheel in cloud power control.
- ActualitzatThe upper power limit in the charging profiles has been modified.
- CorreccióFixed various minor bugs.
-
- NouAdded Basque language
- MilloraPerformance improvement on the e-Chargers page and control panel
- ActualitzatNew way to display the details of the e-Chargers
- CorreccióFixed various minor bugs.
-
- NouRight-click to delete an active item during the creation or editing of an installation in cloud power control.
- NouThe customer's email appears when downloading the transaction table from V2C Payments.
- MilloraImproved interaction between elements during the creation or editing of an installation in cloud power control to avoid impossibilities.
- ActualitzatV2C Payments transaction table sorted by date in descending order.
- CorreccióFixed various minor bugs.
-
- ActualitzatNew validations when creating rates in V2C Payments.
- CorreccióFixed errors in displaying the power control settings.
- 3.1.0NouNew design of the portal v2c.cloud
-
- MilloraGreater speed also on the main screen, and in the charging of the user's e-Chargers.
- MilloraChange the configuration to parallel for faster data loading.
- ActualitzatAll the inverters and meters available in the App have been added.
- CorreccióFixing various bugs, updating and improving translations and user experience.
-
- NouAdded list of wifi networks
- NouAdded hamburger menu for better visualization of the canvas in smart charging.
- NouAdded shared user management
- NouAdded translations
- NouAdded user help for CSV download
- NouRomanian language added
- NouAdded the partner creation form
- MilloraCharging acceleration of the e-Chargers
- ActualitzatChange the navbar to black
- CorreccióFixed issue with the smart charging zoom.
- 2.0.0NouAdded Smart charging
-
- NouAdded invitations to customers
- ActualitzatImage tags also translated
-
- NouAdded to the main screen charger in payment mode or not with icon
- NouNew translations added
- ActualitzatNew design of the main screen
- CorreccióFixed bug with colors changing upon logout
- CorreccióInvoice issue, the correct one was not downloading.
- CorreccióTransactions are now resolved quickly, and there is a change in the format of the rates.
- CorreccióResolved issue in payments with the tabs that were moving.
- CorreccióFixed 'Update software' and bug with charger statuses.
-
- NouAdded Payments option
- NouInvoices added in the new tab and can be downloaded.
- NouAdded flat rate or customized rate when adding a rate
- MilloraImprovement in device charging
- MilloraImprovement of designs to make them responsive on all devices
-
- NouAdded plus charger
- ActualitzatAdd charger in the same way as in the app
- ActualitzatWe show fewer decimals in the tables.
- ActualitzatChange the design of the side menu and some labels.
- ActualitzatRemoved donuts and changed design on the screen up button.
- CorreccióBug fixes and design improvements
- CorreccióFix letter design and login and main screen
-
- NouAdded software update in the configuration
- NouCost calculation according to the rate
- CorreccióChanging the rate is done correctly.
- CorreccióControlled error changing WiFi without connection
- CorreccióEnergy rate calculation is done correctly.
-
- NouYou can now log in by pressing enter.
- MilloraCharging screen improves without connection
- ActualitzatChange of design if there is no connection
- CorreccióDynamic power control is adjusted properly.
- CorreccióGlobal statistics are now updating correctly.
- CorreccióFixed main screen hours
- CorreccióCSV data download in the correct format
-
- NouNew, more specific errors indicated for the user and installers.
- CorreccióBug fixes when linking devices.
-
- MilloraImprovements in website performance.
- CorreccióFunctionality bugs fixed.
-
- NouStyle improvements.
- NouCreation of the V2C website.
- CorreccióBug fixes.