Atjauninājumi
Kas mainās katrā mūsu uzlādes iekārtu un V2C Cloud platformas aparātprogrammatūras versijā.
Jaunākais: Denka 1.1.0 · 12 nov. 2026
Trydan un Trydan Pro
Pašreizējā versija 2.5.2 · Versijas: 47, pirmā: 2022. gada februāris
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- JaunumsDirect query of OCPP status
- JaunumsNew Solplanet/AISWEI Inverter
- JaunumsNew Hoymiles Inverter
- JaunumsBattery discharge control: GoodWe, SolarEdge
- JaunumsHuawei inverters direct connection without Dongle
- JaunumsUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- JaunumsNew "Unlimited" Wake-up 5 mode available from the LCD
- JaunumsImprovements in Bluetooth cybersecurity
- UzlabojumsFixes in FV mode + Minimum power
- UzlabojumsOCPP: duplicate BootNotifications are avoided
- UzlabojumsSecurity menu lock during vehicle charging
- UzlabojumsImprovements for Linky-LORA
Iepriekšējās versijas 46
-
- JaunumsCompatibility with SigEnergy inverters
- JaunumsNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- JaunumsWiFi connection for Deye inverters via Elfin
- JaunumsExpansion to 105 RFID cards
- JaunumsPAP/CHAP authentication for 4G connection
- JaunumsMore stable OCPP connections
- UzlabojumsReading the P1 and Victron meters is more reliable in the event of communication failures.
- UzlabojumsStability of mixed three-phase charging
- UzlabojumsError reporting and diagnostic system
- UzlabojumsImprovement of home battery charging priority in PV charging modes
-
- JaunumsManagement of home battery discharge in charging profiles
- JaunumsUnlocking the Trydan by smartphone proximity
- JaunumsNew models of SofarSolar and Azzurro inverters
- JaunumsAdded current and voltage per phase in Home Assistant and Modbus API.
- JaunumsWiFi connection in Deye inverters
- JaunumsIncrease of up to 80 RFID cards
- JaunumsBattery compatibility in SolarEdge inverters
- JaunumsScroll text for long texts
- UzlabojumsOptimization of Ethernet network interface
- UzlabojumsImprovements in the Modbus TCP client
- UzlabojumsImprovements in mixed three-phase charging
- UzlabojumsImprovement of texts in German
- UzlabojumsIncrease the voltage range of the installation from the control panel.
-
- LabojumsOCPP password bug
- LabojumsProblems connecting to CSMS after restarts
-
- JaunumsTarget charge kWh
- JaunumsNew SMA Sunny Boy model
- JaunumsNew Fronius model with battery
- JaunumsSelect Modbus API address ID
- JaunumsNew Deye models
- JaunumsSofar Solar inverters
- JaunumsAzzurro inverters
- JaunumsSelect MID address
- JaunumsEMMA Huawei
- JaunumsSecurity Profile 2 OCPP (wss + auth + CA cert)
- JaunumsPrivate 4G SIMs in OCPP
- JaunumsOcppFreeMode
- JaunumsOCPP internal queue messages
- UzlabojumsTime synchronization
- UzlabojumsPower plate measurements 1.0
- UzlabojumsWiFi improvements
- LabojumsExclusive mode bug with batteries
- LabojumsCoordinate "ContractedPower" and load profiles with HTTP API.
- LabojumsImprove RFID errors
- LabojumsMixed load bug
- LabojumsBug photovoltaic mode + minimum
- LabojumsBug statistics without FV via BLE
-
- JaunumsMIFARE Ultralight RFID cards
- UzlabojumsMore robust OTA update
- LabojumsBug management autolock with payments mode
- LabojumsBug in payments mode with RFID
-
- UzlabojumsInstallation problem readings
- UzlabojumsImprovement in BYD mode
- LabojumsBug with Wibeee inverter
-
- JaunumsObtain firmware version via Modbus
- JaunumsGoodWe via Modbus TCP
- JaunumsOCPP: FirmwareManagement
- JaunumsAutolock
- JaunumsNew MID models
- JaunumsNew wake-up modes
- JaunumsAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- JaunumsLinky meter for French meters
- JaunumsModbus termination resistance
- JaunumsReading individual properties HTTP API
- JaunumsTurn off/Turn on logo and LCD from HTTP API
- AtjauninātsImprovements in dynamic control
- AtjauninātsImprovement in Sungrow inverter measurements
- AtjauninātsImprovements in the OTA update
- AtjauninātsImprovements in the button panel menu
- AtjauninātsNew Deye models
- AtjauninātsOCPP: improvement in MeterValues
- AtjauninātsOCPP: send StatusNotification "Faulted" with errors and warnings
- AtjauninātsOCPP: publish current version
- AtjauninātsOCPP: BootNotification timeout
- AtjauninātsNew NTP servers
- AtjauninātsImproved WI-FI scanning
- AtjauninātsImprovement in P1 meter
- AtjauninātsImprovement in remote logs
- AtjauninātsIoT call limitation per charger
- AtjauninātsImprove RAM memory
- AtjauninātsStability via Ethernet
- AtjauninātsCorrected translations
- LabojumsError "Waiting for Power"
- LabojumsBug with RFID cards with long names
- LabojumsBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- LabojumsImprove statistics via Bluetooth
- LabojumsLocal balancing improvements for up to 10 devices
- LabojumsBug when sending RFID code in the statistics
- LabojumsBug with Exclusive PV mode and batteries
-
- JaunumsStatic power control is added (only with Trydan consumption).
- JaunumsMixed charging adapts to European rates.
- JaunumsPower control programming with phase limits is allowed.
- JaunumsThe power control adapts to European countries with phase current limits.
- AtjauninātsThe power control algorithm has been modified step by step to apply PID modulation.
- AtjauninātsThe static power control between sockets or between e-Chargers is improved.
- LabojumsThe failure of remote records is avoided when a disconnection occurs.
-
- LabojumsBug DTSU666-G meters
-
- UzlabojumsImprovement in Wake Mode
- LabojumsFixed bug when changing the port in MQTT.
-
- JaunumsEcoCharging to schedule charging automatically during the cheapest daylight hours.
- JaunumsTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- JaunumsCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- JaunumsFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- JaunumsImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- JaunumsImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- JaunumsOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- JaunumsOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- JaunumsOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- UzlabojumsReading the power value of the batteries in Goodwe EH and ET inverters.
- UzlabojumsSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- UzlabojumsImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- UzlabojumsImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- UzlabojumsImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- UzlabojumsOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- UzlabojumsOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- UzlabojumsOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- LabojumsOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- JaunumsVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- JaunumsSAJ hybrid inverters
- JaunumsShelly Pro meters
- JaunumsInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- JaunumsDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- JaunumsTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- UzlabojumsLeak detection
- UzlabojumsMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- UzlabojumsModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- UzlabojumsVisualization of the RFID card authentication process in OCPP
- UzlabojumsThe memory used in JSON and OCPP goes to the SPI RAM.
- LabojumsInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- LabojumsCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- JaunumsAdaptation of OCPP to new central systems
- JaunumsNew Deye models
- UzlabojumsImprovements in the direction detection of the V2C 2.0 control box
- LabojumsLEDs blink when there is no connection.
- LabojumsBug in Greenheiss hybrid
-
- JaunumsDeye / Turbo Energy three-phase
- JaunumsShelly Pro EM and Shelly Pro 3EM (Beta)
- UzlabojumsShow text on bidirectional meters
- UzlabojumsReadings with Fronius and DTSU666
- UzlabojumsReaction times in the leak detector
- UzlabojumsShow Waiting for Charge in Stop mode
- LabojumsBug with French language
- LabojumsRaise the HTTP server via Ethernet
- LabojumsBug in payments
- LabojumsRead-only in the OCPP properties
- LabojumsSave power segments via Bluetooth on some devices.
- LabojumsShelly Portugal measurements
-
- JaunumsLive Remote Logs
- UzlabojumsShow stop due to dynamic control
- UzlabojumsRestarts due to reconnection attempts
- UzlabojumsQA Protocol
- UzlabojumsVoltage and Temperature Reading Power PCB
- LabojumsNaN measurement on some meters
- LabojumsError in Home Wizard readings
-
- UzlabojumsPerformance improvement and future compatibility between Trydan and Trydan Pro.
- UzlabojumsImprovements in OCPP protocol
- UzlabojumsImprovements in the QA process
- UzlabojumsImprovement in memory usage
- UzlabojumsMore robust statistics
-
- JaunumsNetworks with WPA3 security
- JaunumsNew BLE (NimBLE)
- Jaunumse-keys via BLE connection
- JaunumsNew language: Romanian
- JaunumsEnphase version 7.x.x, Solis with batteries
- JaunumsAdaptation of the i2c power board
- UzlabojumsAzure library update
- UzlabojumsUpdate of ESP-IDF and Arduino-ESP32 libraries
- UzlabojumsInvestor communication via WiFi connection without Internet
- UzlabojumsImprovement in V2C 2.0 meter refresh rate
- UzlabojumsImprovement in OCPP, adaptation to support disconnections
- UzlabojumsImprovement in key fob detection
- UzlabojumsImproved refresh rate
- UzlabojumsImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- LabojumsModification of Deye/Turbo Energy batteries
- LabojumsCustomizable MQTT topics and username/password
- LabojumsDisconnection statistics report
- LabojumsBLE compatibility of iPhone
- LabojumsOperation of V2C 2.0 meter at night
- LabojumsAutomatic date and time
- LabojumsInteraction with Megane
-
- JaunumsBug in photovoltaic three-phase mode
- UzlabojumsWiFi recovery routine
-
- JaunumsMixed three-phase charging available through the physical menu.
- JaunumsAdded three-phase MID Meter
- JaunumsInclusion of server ID 2 in SolarEdge inverters
- JaunumsAdded Modbus registers with the meter measurement.
- JaunumsHTTP commands added for integration with HA.
- JaunumsEnphase Envoy Inverter (beta) (versions 5.x.x)
- JaunumsV2C 2.0 error detection of clamp not connected
- JaunumsMQTT Slave with user/password authentication and customizable topics (beta)
- UzlabojumsImprovement of the WatchDog to prevent system freezing
- UzlabojumsImprovement of nearby WiFi scanning
- UzlabojumsBluetoothLE service reconnection protocol
- UzlabojumsWiFi optimization IRAM and affinity with the Azure task
- UzlabojumsReconnection protocol in the absence of WiFi
- UzlabojumsFactory reset
- UzlabojumsThe error code and LED interface
- UzlabojumsImproved the Isolated Installation mode and zero feed-in.
- UzlabojumsReduction in cut-off time through dynamic control to 1 min
- UzlabojumsAutomatic detection of time and time zone
- UzlabojumsThe optimization and refactoring of the measurement slaves
- UzlabojumsUnlocking with BLE Tag
- LabojumsOccasional LCD freezes
- LabojumsFalse positives from the leak detector
- LabojumsProblems with the MID Meter
- LabojumsLED error during update
- LabojumsDefault value for JSON type variables
- LabojumsMeasurement at 0 in Deye/TurboEnergy Inverter
- LabojumsVisual errors and local balancing address assignment
-
- JaunumsSolar Discount on Shortcuts
- JaunumsDeye/TurboEnergy Inverter Beta
- JaunumsPhoenix Contact meter
- JaunumsCarlo Gavazzi meter
- UzlabojumsOCPP improvements and tested in MONTA
- UzlabojumsProblems in dynamic control
- UzlabojumsReconnections and WiFi Stability
- LabojumsFrozen LCD
-
- JaunumsIsolated Mode in Photovoltaic Modes
- JaunumsDutch, Danish, and Valencian
- JaunumsLeak sensor modes (installer menu)
- JaunumsMID meter (installer menu)
- JaunumsNew Ingeteam protocol (Battery Management)
- JaunumsThree-phase meters DTSU666
- JaunumsSDM three-phase meters
- UzlabojumsLocal Balancing Protocol and priorities
- UzlabojumsDetection of ports and hosts in OCPP
- UzlabojumsStable version of SMA Sunny Boy
- UzlabojumsPortuguese version of Wibeee
- UzlabojumsFronius measuring home consumption
- LabojumsUnexpected locks and unlocks
- LabojumsWhite blinking in locked mode removed
- LabojumsError selecting the slaves in beta
- LabojumsError of SolarEdge three-phase inverters
-
- JaunumsChanges and improvements in calibration
-
- UzlabojumsCalibration adapted to the new hardware
- LabojumsData analysis in Kostal Piko fixed
-
- JaunumsLocal balancing between Trydans available via WiFi or wired connection.
- JaunumsSDM-220/320/120 (Tested with the Eastron brand)
- JaunumsDDSU-666 Meter (Common in Huawei installations)
- JaunumsSelf-calibrating without the need for a car
- JaunumsManual hour available
- JaunumsHTTP requests to manage the logs
- JaunumsNew Modbus Registers
- JaunumsGreenheiss inverters
- JaunumsSAJ inverters
- JaunumsWired Solis inverters
- JaunumsResponse time in configurable dynamic control
- UzlabojumsConfigurable installation voltage
- UzlabojumsNew manufacturing process
- UzlabojumsIncluded Shelly three-phase but without FV measurement.
- UzlabojumsCar consumption via MQTT fixed
- UzlabojumsImproved and more intuitive physical menu
- SaderībaBeta models of Goodwe: the battery measurement is canceled.
- LabojumsBug in Max and Min Intensity via Modbus fixed.
- LabojumsFalse positives in the leak detector fixed
-
- JaunumsPrevention of conflicts between slaves and the cloud
- LabojumsGoodWe conflicts and Azure initialization
- LabojumsFix in Shelly with only three-phase.
-
- UzlabojumsPending statistics will be sent only once.
- UzlabojumsShelly 3EM three-phase and modification for Portugal
- LabojumsModbus Multiple Readings Hotfix
-
- JaunumsNew Modbus registers
- JaunumsRFID reader in alpha version
- JaunumsSolaX X3 híbrido compatible
- JaunumsAvailable calibration and shortcuts via WiFi
- UzlabojumsOCPP Improvements
- UzlabojumsImprovement in WiFi scanning
- UzlabojumsImprovement in reconnection routines
- LabojumsBluetooth timezone failure
- LabojumsError in Trydan synchronization - APP
- LabojumsStatic IP configuration in Trydan via WiFi
- LabojumsError saving Modbus parameters
-
- JaunumsNew method for calibrating communication with the car
- JaunumsBeta version of the GoodWe ET/EH/BT/BH
- UzlabojumsImprovement in the communication analysis with the car
-
- JaunumsAuto lock after 60 seconds without a car (shortcut)
- JaunumsModification for Three-Phase Installations in Portugal for V2C 2.0
- JaunumsKostal Piko is added.
- UzlabojumsReformulation of the Dynamic Control Algorithm
- UzlabojumsImprovement in the refresh rate of Huawei inverters
- UzlabojumsSolarEdge stable (Meter measuring export)
- UzlabojumsStable version of GoodWe
- UzlabojumsDetection of state D and E according to protocol
- UzlabojumsImproved QA process
- LabojumsStored in memory after writings via Modbus TCP and RTU
- LabojumsBug in the FV measurements and peaks resolved for V2C 2.0
-
- JaunumsGoodWe in beta version
- JaunumsCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- UzlabojumsMQTT in stable version
- UzlabojumsVictron in stable version
- UzlabojumsImproved connection with Azure
-
- JaunumsMQTT slave beta version
- UzlabojumsDetection of power direction in Wibeee
- LabojumsThe Victron and SolarEdge inverters were bringing down the system.
-
- JaunumsSolarEdge inverter added (Beta)
- JaunumsVictron inverter added (Beta)
- JaunumsAutolock enabled in shortcut (60 s)
- JaunumsAutomatic time zone detection
- JaunumsAlternative meter for car consumption (RS485)
- JaunumsFV Exclusive with configurable variation
- JaunumsNew Languages (French, Italian, and German)
- LabojumsFixed error in minimum power mode.
-
- UzlabojumsImprovements in Dynamic Control with batteries
- UzlabojumsImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- LabojumsResolved the IP configuration issues for Trydan with WiFi and BLE.
- LabojumsResolved the issues with the IP configuration of Shelly BLE.
-
- JaunumsInclusion of the Wibeee meter
- JaunumsSlave 2.0 compatible with Type 1 and Type 2 installation
- JaunumsChange in the established connection blinking
- JaunumsDetection and measurement of bifacial load
- JaunumsImprovement in the collection and transmission of charging data
- JaunumsAlternative Meter Phoenix Contact (ModbusRTU)
- JaunumsModbusRTU in Trydan (simultaneous slave and master)
- JaunumsStatic IP configuration in Trydan
- JaunumsPossibility to select the IP in Shelly
- UzlabojumsInclusion of maximum intensity in OCPP (as a property)
- UzlabojumsImprovement in the reading of Solax inverters
- UzlabojumsInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- UzlabojumsModbusRTU and Modbus TCP server in Trydan
- AtjauninātsFirst stable version of Ingeteam
- AtjauninātsImprovement in the speed of the leak detector
-
- LabojumsError solution in manufacturing when saving WiFi
-
- JaunumsEliminate false communication errors from the slaves.
- JaunumsSave the first Shelly that Trydan connects to.
- AtjauninātsWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- UzlabojumsImprovement in telemetry recovery in OCPP
- UzlabojumsImprovement in scanning nearby WiFi networks
-
- JaunumsInternal Azure ping every 15 seconds to detect disconnections.
- JaunumsSeparate reconnections to avoid crashing the server.
- JaunumsOCPP adaptation to work with Home Assistant
- UzlabojumsMigration of the I2C for the clock and LCD to native idf
-
- UzlabojumsIncrease maximum binary size in local webServer
- LabojumsRecovery of OCPP transactions to prevent telemetry failures
-
- JaunumsThe configuration of different IDs for Huawei inverters is added.
- UzlabojumsCorrection of the power reading of the house
- LabojumsCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- JaunumsPayment Method (V2C Payments)
- JaunumsOCPP Protocol
- UzlabojumsImprovement of WiFi and Bluetooth stability and reconnection
- LabojumsReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- LabojumsCorrection of the maximum file size for updates on Local Server
-
- JaunumsList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- UzlabojumsReconnection with V2C Cloud after communication loss
- LabojumsCorrected Shelly and Solax routines
-
- JaunumsShortcuts on the buttons: Lock and Charging Schedule
- JaunumsLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- JaunumsAP mode when the configured WiFi is not available
- UzlabojumsImprovement in LED error codes
- UzlabojumsAdaptation for compatibility with Huawei inverters
-
- JaunumsWe added connectivity with Fronius inverters.
- UzlabojumsImprovements in screen writing and removal of strange characters
- UzlabojumsImprovement in the transmission of statistics via both WiFi and BLE.
-
- JaunumsError correction x and y
Alva
Pašreizējā versija 1.0.4 · Versijas: 5, pirmā: 2026. gada augusts
Uzlabojumi uzlādes sesijā un BLE drošībā
- UzlabojumsUzlādes sesijas pārvaldība
- UzlabojumsLielāka BLE drošība
- LabojumsKļūda, parādot laiku un enerģiju lietotnē un Installer Panel.
Iepriekšējās versijas 4
-
- LabojumsKļūda ar Ingeteam invertoru
- LabojumsKļūda ar Homewizard P1 mērītāju
- LabojumsKļūda ar Eastron skaitītāju
- LabojumsKļūda ar invertoru GoodWe
-
- JaunumsSavienojums ar Home Assistant
- JaunumsDienas atiestatīšanas loģika
- UzlabojumsAtslēgšana ar piekariņiem un RFID
- UzlabojumsIzņēmumu apstrāde, watchdog un kļūdu tīrīšana
-
- JaunumsSavienotāja identifikācija ar LED palīdzību
- UzlabojumsRestartēšanas loģika
- LabojumsKļūda maksājumā, kas saistīta ar laiku
-
- JaunumsQA un ražošanas loģika
- UzlabojumsSesiju pārvaldība abos savienotājos
- LabojumsNelielas kļūdas
Pole Pro
Pašreizējā versija 6.1.3 · Versijas: 47, pirmā: 2023. gada maijs
Jums ir iepriekšējais Pole? Skatiet tā atjauninājumus.
- LabojumsThe charger no longer hangs when rebooting while shutting down the 4G module or dynamic power control
Iepriekšējās versijas 46
- 6.1.2LabojumsOCPP security event notifications are no longer sent when the connection uses no security profile (profile 0), since some central systems do not support them
-
- LabojumsCorrected default APN for Wireless Logic SIM cards in Belgium
-
- JaunumsAudible buzzer feedback
- JaunumsSupport for registering multiple RFID cards
- JaunumsReading of the installation meter over Modbus RS485 on DC chargers
- JaunumsDynamic power control for DC installations — master and slave units now share and honor the installation power limit
- JaunumsLive display of actual consumption versus offered current on the charger screen
- JaunumsOn-screen guidance walks the user through registering an RFID card
- JaunumsOCPP connection password can now be set from the Cloud and Bluetooth
- JaunumsOCPP now supports security profiles, encrypted TLS connections and Basic Authentication for the central system
- UzlabojumsLanguage codes standardized to the ISO 639-1 format
- UzlabojumsReduced volume of messages sent to the Cloud
- UzlabojumsTime synchronization with the CSMS no longer floods the system log
- UzlabojumsLog rotation no longer loses history when the disk is full
- UzlabojumsSafer firmware updates
- UzlabojumsMore reliable connectivity with automatic failover between Ethernet and 4G
- UzlabojumsCharges history now loads page by page instead of the whole history at once, for a faster tab
- LabojumsMeasurer error message now reads clearly
- LabojumsMore accurate meter-reading validation
- LabojumsCharge metrics are preserved if a charge is interrupted unexpectedly
- LabojumsScreen orientation set in configuration is now applied correctly
- LabojumsFree-charge mode could not be disabled from the installer panel
- LabojumsDynamic power limit was not applied at tariff/hour boundaries, briefly leaving an installation without a limit
- LabojumsResolved random service restarts (crashes) caused by network device discovery
-
- UzlabojumsMore reliable RFID card reading with optimized antenna configuration from first use
- UzlabojumsImproved stability and responsiveness of the charger's web interface
-
- JaunumsOCPP - Immediate "Preparing" status when receiving a remote start command via OCPP
- JaunumsWiFi disabled by default on devices without WiFi configured
- UzlabojumsMore reliable RFID card reading with periodic reader reinitialization
- UzlabojumsBetter cable connection detection and RFID timeout handling
- UzlabojumsCDP - More stable network device discovery, preventing unnecessary register/unregister cycles
- UzlabojumsImproved stability when applying configuration changes to the charger
- UzlabojumsAutomatic migration of legacy pending OCPP messages after update
- UzlabojumsImproved network handling when switching between manual and automatic IP configuration
- LabojumsPower factor value conversion for Carlo Gavazzi meters
- LabojumsImprovements in power measurement accuracy in single-phase or two-phase installations
- LabojumsOCPP - Smart Charging profiles with defined duration now applied correctly
- LabojumsOCPP - Local authentication cache overflow that could prevent charging sessions from startIing
- LabojumsOCPP - OCPP transactions stuck due to unreleased semaphores or null keys
-
- JaunumsEnhanced web server for accessing and editing charger properties
- JaunumsVisual improvements to the web server interface
- JaunumsPersistent price display on screen when the payment system is active
- JaunumsRefined error reporting to the cloud
- JaunumsPower loss detection
- JaunumsWi-Fi disable option from the installer panel
- JaunumsNew buzzer system implementation for white boards
- UzlabojumsEnhanced RFID calibration with on-screen indicator during the process
- UzlabojumsRFID reader no longer forcibly activates when OCPP or Payments are active; explicit configuration is respected
- UzlabojumsRefined cable connect/disconnect notification on each event when payments are active
- UzlabojumsOptimized RFID card readings
- UzlabojumsOCPP - Improvements to the offline transaction queue
- UzlabojumsInternal connection optimization and overall performance improvements
- LabojumsOCPP - Improved measurement value reporting
- LabojumsRefined out-of-range measurement error detection
-
- JaunumsSoftware-level leak detection enable/disable
- UzlabojumsAdjusted cooldown time between charges when a leak is detected
- UzlabojumsOCPP - Improvements to the offline transaction queue
-
- UzlabojumsWhen OCPP is active, we now show on screen when card passed is not registered in central system.
- LabojumsAfter update OCPP image and QR is now recovered.
-
- LabojumsFixed issue where it didn't allow a remote start if a car is connected but not in an active transaction.
- LabojumsFixed issue in setup interface.
- LabojumsFixed monophasic Carlo Gavazzi measurer.
- LabojumsFixed OCPP issue where it wouldn't charge in connector 2 if connector 1 is charging.
-
- UzlabojumsImproved network features mainly 4G connection.
-
- UzlabojumsImproved OCPP charge handling.
- UzlabojumsEnhanced reliability in the smart charging logic.
- UzlabojumsImproved features when stopping a charge with invalid identifiers.
- UzlabojumsImproved QR configuration for OCPP.
- UzlabojumsImproved error handling when sensors or communication components fail.
- UzlabojumsBetter log management to prevent the device’s storage from filling up.
- UzlabojumsImproved USB connection features.
- UzlabojumsImproved RFID calibration and detection display.
- UzlabojumsImproved features related to Bluetooth.
- UzlabojumsImproved dynamic power control allowing charge at minimum intensity if master is not detected.
-
- JaunumsManual timezone setting is now available – The user will be able to configure the timezone even if automatic detection is disabled
- JaunumsCreated a contingency page in case app is not running
- JaunumsAdded Italian option for screen
- JaunumsAdded default payment QR to pay without app
- JaunumsAdded new OCPP personalization options - The user can now set 2 QR codes on the screen
- UzlabojumsImproved updater
- UzlabojumsImproved network connections
- UzlabojumsImproved OCPP meter values
- UzlabojumsImproved discovering devices when dynamic control is active
- UzlabojumsImproved user interface when updates are in progress
- UzlabojumsLocal load balancing is now implemented as dynamic control based specific conditions
- UzlabojumsImproved Bluetooth connection
- UzlabojumsImproved 4g connections robustness
- UzlabojumsImproved STM32 lock timings
- UzlabojumsImproved OCPP now allows external intensity limits
- UzlabojumsImproved data consumption
- LabojumsWhen locking a connector while charging, it now sends end charge telemetry correctly
- LabojumsFixed dynamic control issues
- LabojumsFixed Carlo Gavazzi power meter
- LabojumsFixed OCPP LMS, diagnostics, and charging profile clearing
-
- JaunumsAdded shared library
- JaunumsTimezone can be set manually
- JaunumsTime is now synced with Central System if OCPP is active
- UzlabojumsImproved version/update manager
- UzlabojumsImproved megabyte conversion of Network Monitor
- UzlabojumsObtaining timezone now doesn't need to have correct time by using only http urls
- UzlabojumsMobile usb device name is now obtained dynamically since more usb ports might be used due to TPV
- LabojumsFixed power control issues
- LabojumsFixed that when locking connector during a charge it now ends correctly
- LabojumsRecalculate reboot time when changing time with ble
- LabojumsWe now show on screen when non registered RFID is passed while OCPP is active
- LabojumsFixed OCPP freemode rfid issues
- LabojumsDuplicate StatusNotifications are removed from offline queue
- LabojumsFixed "infinite" OCPP offline queue issue
-
- JaunumsAPN can now be set manually
- UzlabojumsWe now show on screen different wifi images depending on how strong signal is to let know the user how good the connection is
- UzlabojumsGeneral OCPP improvements: we check connection to CS instead of internet for local functioning, we notify a real value now when there's a stop transaction due to power loss, fixed edge cases where connectivity is lost, new ocpp key MaxEVCurrentOffered implemented which limits charge with key instead of smart charging handler, safety mechanisms for ocpp to be more robust
- UzlabojumsIn 4g, increased rssi range for "excellent" so that it indicates correctly when the reception is good
- UzlabojumsImproved data consumption
- UzlabojumsImproved robustness of update
- AtjauninātsAccess point time increased to 15 minutes
- LabojumsHandled issues when SSID has whitespace
-
- LabojumsAccess point improvements.
- LabojumsFixed QA issues.
-
- JaunumsNew direct method to obtain additional information for Smart Charging.
- JaunumsFixed random reboot time.
- UzlabojumsFixed unset RFID.
- UzlabojumsFixed Unknown measurer and made distinction between Unknown measurer and wrongly configured measurer.
- UzlabojumsOCPP Free mode can be toggled through OCPP keys.
- AtjauninātsFixed BLE connection with iphone and fixed bluetooth communication error that appeared on app.
- AtjauninātsNetwork improvements. No interface resets performed at boot which improves bootup time. Network changes now don't require reboot. When changing WIFI settings or ip ethernet settings, it connects after setting it instead of rebooting.
- LabojumsFixed issue where things on screen were missing in one connector chargers.
- LabojumsFixed time/timezone issue caused when the date is off by a few days.
- LabojumsNew property added to toggle if vehicle should be able to charge even though measurers aren't working ( Only works when OCPP, payments or dynamic control isn't enabled ).
-
- JaunumsReflect on screen when charge is paused.
- JaunumsMade reboot time random.
- LabojumsIncreased SAS token time to live of azure.
-
- JaunumsChanges made to reduce network usage that can be toggled on or off.
- JaunumsFixed case where config is corrupted or missing and would give trouble at startup.
- JaunumsWe now send dead letter if cpu gets too hot and cpu temperature is now logged.
- UzlabojumsFixed OCPP inverted measurer error.
- UzlabojumsAdded mechanism to disable or enable Wifi and bluetooth.
- UzlabojumsWe now report information regarding which type of connection to the internet the e-charger has.
- AtjauninātsChanged led colors. Switched State A (now white) and State B (now green) colors.
- LabojumsFixed set threshold values and neopixel leds of Stm32. We can now also obtain control pilot value from Stm32.
- LabojumsOCPP ConnectionTimeOut value can now be changed on the fly.
- LabojumsWe now report iccid of sim card is connected. If sim is connected but we can't obtain iccid, we send dead letter.
- LabojumsFixed log download of http interface.
-
- JaunumsLTE signal is now reflected correctly instead of always showing great signal.
- UzlabojumsFixed wathdog reboot after doing hard reset.
-
- JaunumsAdded dynamic photovoltaic.
- JaunumsAdded dead letters: measurer fails and kernel error.
- JaunumsProperty "wifi_info" is now reported.
- JaunumsProperty "wifi_static" can be set through ble.
- JaunumsWe can now obtain statistics through direct method.
- JaunumsAdded individual log level for each type of logger.
- JaunumsAdded neopixel led type for stm32.
- JaunumsWe can now set threshold values with stm32 and get control pilot value if debug log of "Stm32" is activated.
- UzlabojumsImprovements in dynamic control, fabrication, QA, Azure, OCPP, config handling, 4g, access point and stm32.
- UzlabojumsWe now obtain timezone through url.
- UzlabojumsRemoved raspbian logo and desktop during boot and added V2C logo.
- UzlabojumsChanged default language after fabrication from english to spanish.
- AtjauninātsGeneral bug fixes.
- LabojumsWhen downgrading we ensure that version we downgrade to is compatible.
-
- JaunumsFixed property "ocpp" change bug.
- UzlabojumsProperties "powerweekday", "powerweekend" and "phase_map" can be changed through bluetooth.
- UzlabojumsChanged configuration handling to differentiate internally and externally set variables so that externally set or obtained variables are handled accordingly following the property schemas.
- LabojumsWe now report wifi_static with static ip configuration.
- LabojumsStatistics are now saved locally.
-
- UzlabojumsMeasurer fails are now registered with modbusrtumeasurer.
- UzlabojumsScreen font bigger for small title.
- LabojumsValidate configuration with schemas during loading.
-
- JaunumsOCPP authorize can now function by connector.
- JaunumsOCPP WSS connection.
- JaunumsFixed OCPP parent id tag bug.
- JaunumsOCPP meter values now work for 3 phases.
- UzlabojumsFixed error 3 not appearing on screen.
- UzlabojumsFixed energy by hour bug.
- UzlabojumsChanged measurer reading approach for faster reads.
- UzlabojumsWith dynamic balancing we now show used and available power in frontend.
-
- UzlabojumsWe show dynamic balancing information on screen.
- UzlabojumsSimplified handling of configuration.
- UzlabojumsImproved dynamic balancing.
-
- UzlabojumsCharger won't reboot if car is in state B and OCPP or Payments is active.
- UzlabojumsWhen car changes from state C to B, charge information will persist on screen.
- UzlabojumsCurrent state charge now reports errors.
- UzlabojumsAdded configuration property validation.
- LabojumsDirect method to obtain dynamic balancing information.
- LabojumsGeneral dynamic balancing improvements.
- LabojumsOCPP improvements.
-
- LabojumsChanged remaining set_basic_unreported_config to set_basic_config.
-
- JaunumsFix dynamic control bug, powerbytram is not being updated.
- JaunumsFixed bug where whitelist of reported items wasn't being applied and properties weren't being stored in database.
- UzlabojumsRemoved non-repetitive logger.
- UzlabojumsChanged access point interface to change apn, with manual mode or mobile operator mode.
- AtjauninātsRefactored config charge box. Removed BASIC_UNREPORTED and created whitelist of properties to report.
- AtjauninātsPhase map is now not applied to installation meters.
- LabojumsFixed payment bug where a charge couldn't be started properly if charge was started with the hose unlocked.
- LabojumsFix bug with power being zero, dynamic control failing when there are no connectors.
- 3.1.8AtjauninātsForce WIFI and bluetooth GPIO pins for compute module 4 to work.
- 3.1.7AtjauninātsForce 4g GPIO pins for compute module 4 to work.
-
- UzlabojumsWhen we detect that measurers aren't working, we send an unblock command in case there's a charge and the charger has lost power.
- UzlabojumsCreate section BASIC_UNREPORTED for properties that are used but we don't want to report.
- UzlabojumsLocked value has persistance when measurers fail.
- LabojumsWhen we don't receive petitions from chromium we now press enter and Ctrl+F5 if there's anything we need to accept.
-
- LabojumsChanging WIFI configuration with bluetooth now reboots the charge point.
-
- UzlabojumsFixed configuration file so that software works with compute module 3 and 4.
- UzlabojumsChanged reboot logic. It will now reboot if there's a car connected but charge is not allowed.
- LabojumsChanged payments qr code.
- LabojumsWe can change log level with property.
-
- LabojumsMeter values fixed. We now send wh instead of kwh.
-
- JaunumsPause is now reset when it goes back to state A.
- JaunumsShow measurer error as "Error 3" on connector. Behaviour is that connector is locked until it's fixed.
- JaunumsSet wire connected again.
- UzlabojumsFixed general network errors. Improved access point and wifi connectivity.
- LabojumsFixed error where timezone wasn't set correctly so time appeared incorrectly.
- LabojumsFixed payment_max_mode timeout bug.
-
- JaunumsFixed power, it was shown in W and is now in Kw.
- UzlabojumsChange timezone automatically.
- LabojumsAdded triphasic phoenix contact measurer.
- NoņemtsFixed removal of grey notification update.
-
- JaunumsWhenever there's an action that provokes rebooting, it will show on screen that it's going to reboot and the cause.
- JaunumsScreen orientation can now be set and depending on parameter.
- JaunumsAdded error message 1 and 2.
- JaunumsBluetooth patch so that bluetooth initialization takes less time.
- JaunumsCreated patch system. System level changes will be applied with this system.
- UzlabojumsMeasurer refactoring.
- UzlabojumsImei obtention improved.
- UzlabojumsInitial version of bluetooth finished: Obtain properties change basic properties, program charge, reboot, add rfid and change wifi.
- UzlabojumsBoot improvements. "Page not found" isn't shown anymore. Boot is faster. There's a gif indicating that system is starting.
- UzlabojumsObsolete properties are now deleted automatically so that they aren't reported.
- AtjauninātsRFID can now function with payments. If RFID is enabled with payments, registered cards will be able to start charges. If RFID is disabled with payments, no card will be able to start a charge.
- LabojumsLimited number of messages we can send to iothub.
- LabojumsIn OCPP, fixed sending of meter values. Now sending in wh and not in kwh.
- LabojumsBoot patch so that GPIO pin initialization takes less time.
- LabojumsMonophasic measurer Eastron SDM220 implemented.
- LabojumsImproved robustness on all direct methods.
- LabojumsFixed bug where it didn't reconnect properly to iothub when it disconnected.
- LabojumsCreated direct method to put a QR code on the OCPP screen.
- NoņemtsRemoved wire_connected event telemetry.
- 3.0.9LabojumsFixed ocpp meter value Energy.Active.Import, when measurer is flipped.
-
- AtjauninātsFixed error where e-Charger couldn't obtain dns when connected with WIFI.
- LabojumsFixed local load balancing when one connector was charging. Now when one connector is charging, it will charge at the set intensity.
- 3.0.7LabojumsFixed ocpp Remote Start Transaction and Remote Stop Transaction.
- 3.0.6LabojumsFixed error that ocurred in ocpp where it didn't clear properly the idtag when finishing a transaction.
-
- AtjauninātsChanged access point ip from 192.168.44.1 to 192.168.4.1
- AtjauninātsWe now report the charger's state instead of the requested vehicle state.
- AtjauninātsChanged access point master password.
- LabojumsFixed websocket connection issue with nuitka compilation.
-
- UzlabojumsImproved update logs.
- 3.0.3JaunumsMoved Version from center to right side and added V. before the version number.
- 3.0.2UzlabojumsSTM will now detect SPI bus communication errors and will automatically reset.
-
- JaunumsScreen now shows when RFID card is registered.
- JaunumsTop bar now shows version and if access point is accessible.
- JaunumsAccess point interface now has, local load balancing, rfid card registering and log download.
- JaunumsCheck that compute module and board have been created properly.
- UzlabojumsScreen is now monitored so that it refreshes in the case that no requests have been made after 15 seconds.
- UzlabojumsQA diagnostic is obtained through access point.
- UzlabojumsReduced access point available time to 10 minutes.
- LabojumsFixed bug where connector stopped working properly when sending intensity 0.
-
- JaunumsInitial Version
Denka
Pašreizējā versija 1.1.0 · Versijas: 10, pirmā: 2025. gada oktobris
- JaunumsDinamiska jaudas kontrole starp vairākiem Denka un Pole lādētājiem vienā instalācijā, ar automātisku sadali atbilstoši pieejamai jaudai.
- JaunumsDenka galvenais var nolasīt uzstādīšanas skaitītāju caur RS485, lai sadalītu visas mājas jaudu.
- JaunumsMaksimālā dinamiskās vadības jauda tiek pielāgota kW no V2C platformas.
- JaunumsOCPP: Savietojamība ar OCPP drošības profiliem 0, 1, 2 un 3, un ar autentifikāciju Basic Auth; OCPP parole var mainīt no mākoņa, Bluetooth un vietējā tīmekļa.
- JaunumsOCPP: Iekšējās kļūdas lādētājā tiek paziņotas CSMS, izmantojot StatusNotification
- JaunumsUzlādes vēsture ar detalizētiem katras sesijas rādītājiem (enerģija stundā, galīgais uzlādes stāvoklis un transportlīdzekļa ierobežojums), lapošana vietējā tīmeklī.
- UzlabojumsSaziņa ar jaudas moduli ir stabilāka, ar daudz mazāk kļūdām uzlādes laikā un bez viltus kļūmju brīdinājumiem startēšanas laikā.
- UzlabojumsUzticamāka lādētāja restartēšana
- UzlabojumsĀtrāks 4G savienojums ar tīklu, ar noklusējuma APN un atbalstu Wireless Logic SIM kartēm.
- UzlabojumsTīkls: Būtiski uzlabojumi tīklu savienojuma pārvaldībā. Automātiska pārslēgšanās starp Ethernet, WiFi un 4G stabilāka, un statiskā IP pareizi piemērota.
- UzlabojumsDiska vietas pārvaldība: žurnāli tiek rotēti un ierobežoti, nezaudējot vēsturi, un tiek novērsta atmiņas piepildīšana.
- UzlabojumsUzlabota validācija pēc saziņas kļūmes ar automašīnu (SLAC) un maksājumu sistēmu.
- UzlabojumsBūtisks uzlabojums kļūdu vai deadletters ziņojumos dažādām V2C platformām.
- LabojumsPārtraukta uzlāde strāvas pārtraukuma dēļ tiek pareizi pabeigta un norēķināta, kad strāva atgriežas.
- LabojumsOCPP: OCPP ziņojumu rinda vairs netiek bloķēta, kad serveris atbild ar kļūdu.
- LabojumsOCPP: Ja OCPP serveris noraida darījuma sākumu, uzlāde tiek apturēta.
- LabojumsOCPP: Brīvo režīmu tagad var atspējot no instalētāja paneļa.
Iepriekšējās versijas 9
-
- UzlabojumsKartes maksājumi tiek slēgti, kad transportlīdzeklis ir pilnībā atvienots, lai iekasētā summa vienmēr atbilstu piegādātajai enerģijai.
- UzlabojumsUzticamāka restartēšana lādētājiem ar mobilo savienojamību (4G).
- LabojumsViedās uzlādes profili ar ilgumu, kas nosūtīti caur OCPP, tagad tiek pareizi piemēroti.
- LabojumsOCPP ziņojumi, kas gaida nosūtīšanu, vairs netiek zaudēti, atjauninot no iepriekšējās versijas.
- 1.0.5UzlabojumsLādētājs pareizi startē pat tad, ja nav pieejams tīkla savienojums.
-
- UzlabojumsSavienojums ar jūsu OCPP platformu tiek automātiski atjaunots pēc tīkla kļūdas.
- UzlabojumsRFID lasītājs pats atjaunojas pēc lasīšanas kļūdas, bez nepieciešamības restartēt lādētāju.
- LabojumsKonfigurācijas izmaiņas varēja pārstāt piemēroties pēc iekšējas kļūdas. Tagad tās vienmēr tiek piemērotas.
- LabojumsTerminālis Payments vairs netiek palaists, kad tas ir atspējots.
- 1.0.3LabojumsLādētājs varēja pārstāt reaģēt pēc ilgstošas darbības. Atrisināts.
-
- UzlabojumsJūsu konfigurācija un OCPP atslēgas tiek saglabātas, atjauninot lādētāju.
- UzlabojumsAtjaunināta jaudas kontroles programmaparatūra, lai nodrošinātu stabilāku un precīzāku uzlādi.
- SaderībaDenka tiek iekļauta vienotajā V2C platformā un pāriet uz jauno 1.x versiju līniju, kas aizstāj 0.14.x sēriju.
- LabojumsKļūdas, uzsākot vai apturot uzlādes sesiju ar OCPP.
- LabojumsLādētājs vairs nemēģina bezgalīgi pieslēgties mākonim ar beigušos derīguma termiņu akreditācijas datiem.
- LabojumsRFID kartes ar ciparu kodiem tika nolasītas nepareizi.
- LabojumsAtjauninājumi varēja neizdoties, pārejot no noteiktām versijām.
-
- UzlabojumsViedā uzlāde: jaudas slīdnis instalētāja panelī.
- UzlabojumsVispārēji uzlabojumi sistēmas stabilitātē un uzticamībā.
- UzlabojumsVispārēji uzlabojumi darbībā un stabilitātē.
- LabojumsLabojumi viedās uzlādes OCPP darbībā.
- LabojumsProblēmu labojumi sistēmas trauksmju pārvaldībā un atjaunošanā.
-
- JaunumsUzlādes apturēšana pie konkrēta SoC
- JaunumsPogas avārijas stāvokļa ziņojums.
- JaunumsSlīdnis tīmekļa serverī.
- JaunumsTransportlīdzekļa SoC un protokola ziņojums uz aizmugursistēmu.
- JaunumsTiešā metode `currentcharge` tagad atgriež atlikušo laiku līdz SoC bulk un pilnam.
- JaunumsTieša metode, lai restartētu `autossh` pakalpojumu.
- JaunumsIP režīma iestatīšana (publisks/privāts) 4G savienojumam.
- UzlabojumsViedā uzlāde OCPP.
- UzlabojumsVeiktspējas uzlabojumi.
- UzlabojumsWiFi moduļa palaišana.
- UzlabojumsHTTP servera migrācija.
- LabojumsKļūdu labojumi startēšanas konfigurācijā.
- LabojumsKļūdu labojumi OCPP viedajā uzlādes funkcijā.
- LabojumsKļūdu labojumi tīmekļa serverī un saziņā ar aparatūru.
-
- UzlabojumsVeiktspējas uzlabošana DC parametru nosūtīšanā.
- LabojumsNovērsta SPI bloķēšana.
- LabojumsKļūda `TimerHandler` ar `n_connectors`.
-
- JaunumsIntegrācija izmaiņām ziņotajās īpašībās.
- JaunumsRFID kalibrēšanas pielāgošana no uzstādīšanas paneļa.
- JaunumsIntegrācija ar koplietotās bibliotēkas novēroto īpašību.
- JaunumsUzlādes apturēšana pie konkrēta SoC.
- JaunumsBaltā saraksta uzlāde pēc MAC.
- LabojumsKļūda `TimerHandler` ar `n_connectors`.
- LabojumsHotfix ziņojumu nosūtīšanas pieaugumam.
Screen
Pašreizējā versija 2.20 · Versijas: 66, pirmā: 2022. gada marts
- LabojumsFixed rfid bug in ocpp.
Iepriekšējās versijas 65
- 2.19LabojumsFixed rfid card issue in stop transactions.
- 2.18LabojumsFixed OCPP error where transaction wasn't started when states passed from C to B to C.
- 2.17LabojumsCB Master: Improved robustness of rfid charge track so that if one connector is fully charged and a different car wants to charge in the other connector it can now charge.
- 2.16LabojumsCB Master: Fixed bug that wouldn't allow two connectors to charge with payment + RFID.
- 2.15JaunumsCB Master/CB N: Rfid cards can start a charge in payment mode if rfid is enabled.
- 2.14LabojumsCB Master: We check if measurer is flipped by connector instead of globally.
- 2.13LabojumsCB Master: We check if measurer is flipped while configuring meter values so that they are sent correctly.
-
- LabojumsCB N: Fixed cloud iot problem.
- LabojumsCB Master: Configuration file is restored correctly in the case it's lost. This provoked the page not found error.
- LabojumsCB Master: Fixed bug where a connector couldn't start a charge when there's a car on the other connector with state B.
- 2.11LabojumsCB Master: Meter power bug fix.
-
- JaunumsCB N: Car state management D and E.
- UzlabojumsCB N: General payment improvements.
- UzlabojumsCB N: In payment method, when you move from status c to b, it does not allow you to reload again until you start a new transaction.
- UzlabojumsCB N: Improved restart logic when any OCPP configuration is changed.
- UzlabojumsCB Master: General meter improvements.
- UzlabojumsPole: Filter to reduce number of logs.
- LabojumsCB Master: Fixed payment bug that sent the upload permission to the wrong connector.
- LabojumsCB Master: Fixed bug that when two cars were connected and the B connector was in B status, when the card was swiped, the B was set to charge when the A should be set.
- LabojumsCB Master: Total energy bug arrangement from version using imported and exported energy.
-
- UzlabojumsCB Master: Meter restructuring.
- UzlabojumsOCPP: General improvements in Smart Charging and Tx Profile implemented.
- UzlabojumsOCPP: Changes due to restructuring of the meter.
- UzlabojumsOCPP: Restructuring of smart charging. Obtain composite timetable with several profiles.
-
- JaunumsCB Master: Integrated SACI meter and changes so that the serial configuration per connector is not linked.
- UzlabojumsCB Master: Increased RFID SPI communication speed and lowered RFID gain if noise is detected.
- UzlabojumsCB Master: Code refactoring
-
- JaunumsOCPP: Starting point for get composite schedule done.
- JaunumsOCPP: Relative profiles are handled but only for Smart Charge profiles where connector id is bigger than 0.
- JaunumsOCPP: Smart Charging Tx Profiles are now accepted.
- JaunumsOCPP: In websocket connection, added "compression=None" since without it it doesn't work on latest Steve version.
- UzlabojumsCB Master: Refactored serial and made some changes that improve flexibility. We can now have one connector with one type of measurer and the other connector with a different type of measurer.
- UzlabojumsOCPP: Added next time check mechanism for Smart Charging so we check the next time any limit changes instead of every 30 seconds.
- UzlabojumsOCPP: General Smart Charge improvements.
- LabojumsCB Master: Convert to positive the negative values read by Phoenix Contact measurer.
- LabojumsCB Master: Adjusted the precision of Phoenix Contact monophasic measurers.
- LabojumsCB N: Fixed bug provoked by changing local load balancing from v2c service.
- LabojumsOCPP: Change availability of Persistant Data handler is now async so that we can call it without blocking the execution of the ServerController.
- LabojumsOCPP: Fixed clear charging profiles.
- LabojumsOCPP: We handle decimal numbers on the Smart Charge profile's limit.
-
- JaunumsCB N: Changes due to Smart Charging
- JaunumsOCPP: Smart Charging starting point fininshed.
- JaunumsOCPP: Smart Charging configuration keys are handled.
- JaunumsOCPP: Smart Charging profiles can be added and will be validated and can also be deleted.
- LabojumsOCPP, CB N and CB Master: Fixed bug when locked was modified and ocpp was activated but chargepoint isn't connected to any central system.
- LabojumsCB Master: Fixed bug when OCPP charge is started where if connector 1 was charging, connector 0 couldn't start a charge.
- LabojumsCB Master: Prevent crash in the case that .versions folder doesn't exist.
- LabojumsCB Master: Register cards are now added to card cache.
-
- JaunumsPole: Screen now shows when user passes a non registered RFID card.
- UzlabojumsCB Master: Improvements in update process.
- UzlabojumsCB Master: Changes so that screen indicates when a non registered RFID card is passed.
- UzlabojumsCB N: Improvements in update process.
- UzlabojumsOCPP: GetConfigurationKeys now returns unknown keys and we handle SupportedFileTransferProtocols key.
- UzlabojumsPole: Romanian identifier moved to position 6 to maintain order language with Trydan.
-
- UzlabojumsCB Master: We store RFID cards in cache.
- UzlabojumsCB N: RFID reader improvements. Case where two connectors are plugged in and a card is passed.
- UzlabojumsCB N: New communication method so that CB master can obtain RFID cards.
- NoņemtsCB Master: We don't send wifi_info in report anymore and we have removed functions related to wifi_info.
- NoņemtsCB N: We don't send wifi_info in report anymore.
-
- JaunumsCB N: Static IP configuration through access point.
- UzlabojumsCB Master: Improvement in connect/disconnect logic. Disconnection is less rigid and we increased network check from 5 seconds to 15 seconds.
- UzlabojumsCB Master: Increased RFID reader antenna gain.
- UzlabojumsCB N: When charger reconnects, it will only send report if a property has changed.
- UzlabojumsCB N: Properties are now only reported when they have changed from previous value.
- LabojumsCB Master: CWe fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- LabojumsCB N: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- LabojumsOCPP: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
-
- UzlabojumsCB Master: Safeguard so that it doesn't fail when there's a missing network card and we try to obtain data usage.
- UzlabojumsOCPP: Removed range validation from measurer.
- AtjauninātsCB Master: Removed range validation from measurer for Carlo Gavazzi and Phoenix Contact measurers.
- LabojumsCB Master: Fixed energy by hour bug.
-
- UzlabojumsCB N: We show in log if i2c reconnects.
-
- JaunumsCB Master: Chargebox Cache now stores state of connectivity with V2C service to show it on the screen.
- JaunumsCB N: Chargebox Cache now stores state of connectivity with V2C service.
- JaunumsPole: The screen now shows a cloud icon to indicate connectivity to our cloud.
- UzlabojumsCB Master: Adjustment in measurer so that it can handle int32 represented as uint.
- UzlabojumsCB N: Log improvements to not show get_has_internet_connection y and reduce error messages generated when i2c is not working.
- UzlabojumsCB N: Changes to reduce calls to has_internet_connection to consume less data.
- UzlabojumsOCPP: We log exception names since sometimes exception errors return empty string.
- UzlabojumsOCPP: We capture error if there's an error when sending heartbeat.
- UzlabojumsOCPP: We change client controller so that it's the same as CB N and CB Master.
- LabojumsCB N: Seconds of timeout now return 0 instead of None if not set.
-
- UzlabojumsCB Master: Master now sends the balanced intensity when it changes.
- UzlabojumsCB N: Changed order of what happens when configuration is changed. We first update the value, then we report the changes to Azure and finally we set the cache.
- UzlabojumsCB N: CB Master now sends balanced intensity instead of CB N probing for change.
- LabojumsCB Master: Fixed error where RFID stops charge while the other connector is enabled.
- LabojumsCB Master: Fixed error where RFID card is passed and both connectors have a car plugged in.
- LabojumsCB N: Fixed bug where changing local load balancing set both connector intensities to 16.
-
- UzlabojumsCB Master: Change in log system to not show repeated logs.
- UzlabojumsCB Master: Shared properties are now set in the other connector if they are different on startup.
- UzlabojumsCB Master: Completely decoupled OCPP from CB N and get_ocpp_config function fixed.
- UzlabojumsCB Master: Network state is now sent when changed instead of being probed every 30 seconds.
- UzlabojumsCB N: General improvements of communication between modules and cache.
- UzlabojumsCB N: Improved stability related with missing configuration.
- UzlabojumsCB N: Change in log system to not show repeated logs.
- UzlabojumsCB N: Fixed problem where Chargebox loop would destroy RFID state.
- UzlabojumsCB N: Fixed OCPP ConnectionTimeout.
- UzlabojumsCB N: Completely decoupled OCPP from CB N
- UzlabojumsCB N: Network state is now sent when changed instead of being probed every 30 seconds.
- UzlabojumsCB N: We only change repository hash if it's different than the current one.
- UzlabojumsCB N: Updating checks if charger is updated or not and only changes version after it has been updated.
- UzlabojumsCB N: General improvements of communication between modules.
- UzlabojumsOCPP: Improved Client Controller traceability.
-
- UzlabojumsCB Master: Created Cache to decrease the number of requests and communication between modules.
- UzlabojumsCB Master: Fixed network reset problem.
- UzlabojumsCB Master: Changes so that Pole can receive all the information it needs in one call.
- UzlabojumsCB Master: Changes dues to how the measures are now sent.
- UzlabojumsCB Master: General access point improvements.
- UzlabojumsCB Master: Improvements due to changes in module communication.
- UzlabojumsCB N: Created singletons are now thread safe.
- UzlabojumsCB N: Server Controller is now executed sooner due to being fundamental in correct functioning.
- UzlabojumsCB N: Changes to take into account CB Master's cache
- UzlabojumsCB N: Changed way we obtain measures to perform less requests with Client Controller.
- UzlabojumsCB N: Improvements due to changes in module communication.
- UzlabojumsOCPP: Created singletons are now thread safe.
- UzlabojumsOCPP: Completely decoupled from CB N and now only communicates with CB Master.
- UzlabojumsOCPP: Simplified communication between modules.
- UzlabojumsOCPP: Improvements due to changes in module communication.
- UzlabojumsPole: Created singletons are now thread safe.
- UzlabojumsPole: Completely decoupled CB N and we obtain all information needed in one call to CB Master.
- UzlabojumsPole: Improvements due to changes in module communication.
-
- UzlabojumsCB Master: The charger now limits the number of messages that appear in the case that there's a range validation fail of a measure.
- UzlabojumsCB N: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- UzlabojumsCB N: Restart Server Controller mechanism.
- UzlabojumsOCPP: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- UzlabojumsOCPP: Restart async Server Controller mechanism.
- UzlabojumsPole: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- LabojumsOCPP: If there's an error handling a request, we won't add it to the offline queue.
- LabojumsOCPP: Include thread and sys libraries.
-
- UzlabojumsCB N: When rebooting, we check module communication server.
- UzlabojumsCB N: Decoupled concept of connector id and measurer address.
- UzlabojumsCB Master: When rebooting, we check module communication server.
- UzlabojumsCB Master: Decoupled concept of connector id and measurer address.
- UzlabojumsCB Master: Fixed error in Phoenix Contact measurer.
- UzlabojumsPole: ZMQ integrated to improve communication.
-
- UzlabojumsPole: Improvement to let the user know when to connect the vehicle.
- UzlabojumsPole: Screen now reflects if charger has only one connector.
- UzlabojumsCB Master: Changed SSID format so that it's the same as Trydan's format.
-
- UzlabojumsOCPP: Added measurer range validation.
- UzlabojumsCB Master: Added measurer range validation.
- AtjauninātsOCPP: AuthorizeRemoteTxRequests is now a read and write configuration key.
- LabojumsOCPP: Fixed problem with repeated logs.
- LabojumsCB Master: Fixed problem with repeated logs.
- LabojumsCB N: Fixed problem with repeated logs.
-
- UzlabojumsCB N: Handled special case of change intensity.
-
- JaunumsCB Master: Access point logic fininshed.
- JaunumsOCPP: Data validation when configuration is changed.
- JaunumsOCPP: Charger can now handle multiple transactions offline.
- UzlabojumsCB N: If OCPP is on, we disable payment mode.
-
- UzlabojumsOCPP: Reset function improved. Corresponding Status Notification is sent.
-
- UzlabojumsCB N: General stability improvements.
- UzlabojumsCB N: Changed payment method approach.
- UzlabojumsCB Master: Changed payment method approach.
- UzlabojumsCB Master: Improved robustness in the case the access point software is not installed.
- UzlabojumsPole: Improvements due to payment method.
-
- JaunumsOCPP: Change availability validates connector.
- JaunumsCB Master: Finished Access point.
- UzlabojumsCB Master: Changed compressed file formats from gzip to gz
- UzlabojumsCB Master: Force backup when restarting.
-
- JaunumsCB N: Allow to change intensity, when i2c is failing.
- JaunumsCB Master: Implemented most of the access point server functionalities.
- LabojumsCB Master: Fixed OCPP measurer error that ocurred when all selected measures in Meter Values returned 0.
- 1.4.3JaunumsCB Master: Initial version of the access point server.
-
- UzlabojumsCB N: Changes to improve Pole software.
- UzlabojumsPole: Changes to simplify view logic.
- LabojumsCB Master: If payment mode is active, charger won't allow to charge with RFID card.
- LabojumsPole: Removed sourceMappingUrl to prevent 404 error when there's no internet.
- 1.4.1LabojumsCB N: Payment mode changed since payload format for server has changed.
- 1.4.0JaunumsPole: Changes in screen software that reflects payment mode, blocking connectors and OCPP.
-
- LabojumsOCPP: Charger won't send Authorize if passed RFID card is already used in a transaction.
- 1.3.23UzlabojumsOCPP: We store RFID cards in lower caps to improve robustness.
-
- UzlabojumsOCPP: Improved robustness of RFID cards stored in the Local Authorization list.
-
- UzlabojumsOCPP: Improved Local Authorization logic.
-
- LabojumsCB Master: Fixed wifilist sending format.
-
- JaunumsCB N: We report information regarding wifi_info. Direct method to ask for the SSIDs the raspberry pi detects.
- 1.3.18UzlabojumsOCPP: Improved authorization cache handler.
-
- UzlabojumsOCPP: Improved handling of measurer values.
-
- UzlabojumsOCPP: Improved handling of configuration keys.
-
- AtjauninātsCB N: Payment mode with duration and timers.
-
- UzlabojumsOCPP: Improved MeterValues handler.
- 1.3.13JaunumsOCPP: Finished Local Authorization List profile.
- 1.3.12UzlabojumsOCPP: Log Improvements.
- 1.3.11LabojumsOCPP: Fixed bug that wouldn't send Authorize Request when passing the RFID card.
-
- JaunumsOCPP: Basic implementation of OCPP profiles: FirmwareManagement, LocalAuthListManagement, Reservation and SmartCharging.
- 1.3.9UzlabojumsCB Master: Fixed RFID card reading with Wiegand reader for cards that have a 0 on the left side. Example of cards that failed: 32:0a:2c:23, 41:00:32:12.
-
- AtjauninātsOCPP: Availability isn't managed by OCPP anymore. It is handled exclusively by property locked.
- 1.3.7UzlabojumsCB N: If charger is blocked, led blinks won't be sent.
- 1.3.6JaunumsCB N: Payment Mode finished with start and stop.
- 1.3.5UzlabojumsOCPP: Clear Cache can only be performed when all connectors are in the OCPP state Available.
-
- UzlabojumsOCPP: Changes so that availability can be changed from CB N.
-
- UzlabojumsCB Master: OCPP module can now ask for Status Notification.
- AtjauninātsOCPP: The charger the different possible OCPP states in the Status Notification.
- 1.3.2UzlabojumsOCPP: We can now set configuration parameters for safeguard.
- 1.3.1UzlabojumsOCPP: Change availability is now completely functional. It changes to inoperative during a charge and availability changes the locked value.
- 1.3.0LabojumsOCPP: Changed way we obtain measurer data for OCPP.
- 1.2.0LabojumsOCPP: Temporary fix for Place to plug since OCPP library can't handle unknown keys.
- 1.1.0LabojumsOCPP: Fixed _available_connectors error.
-
- JaunumsOCPP.
- JaunumsScreen.
- JaunumsPole.
- JaunumsCB Master.
- JaunumsCB N.
V2C Cloud lietotne
Pašreizējā versija 3.3.2 · Versijas: 30, pirmā: 2023. gada februāris
- JaunumsJauns lietotnes īpašais tumšais režīms: visi ekrāni pareizi pielāgojas tālruņa tumšajam režīmam.
- JaunumsJauns Izskata ekrāns (Iestatījumi > Lietotāja dati > Izskats), lai izvēlētos starp Automātisko režīmu (seko tālrunim), Gaišo vai Tumšo režīmu.
- JaunumsJauns QR un svītrkodu lasītājs, ātrāks un uzticamāks, lai identificētu e-Charger lādētāju Payments sistēmā un pārī savienošanas laikā.
- JaunumsKļūdu ziņojumi būs skaidrāki, ja pieteikšanās notiek nepareizi.
- UzlabojumsĀtrāka lietotnes palaišana bez sākotnējā baltā mirgošanas efekta.
- UzlabojumsLabotas dubultās malas un pelēkās joslas Android 14 un vecākās versijās, kad lietotne tiek aizvērta un atkal atvērta.
- UzlabojumsLietotne ar mazāku izmēru: ievērojami samazināts tās apjoms, pateicoties attēlu un koda optimizācijai Android ierīcēm.
- SaderībaLietotnei tagad nepieciešama Android 8.0 vai jaunāka versija.
- AtjauninātsRežīms „Bez injekcijas” vai „Izolēts” uzlādes profilos: minimālā jauda ir 300 W, jo zemāka akumulatora izlāde ir nepietiekama. Ja ievadīta mazāka vērtība, tiek parādīts brīdinājums.
- LabojumsLabots kļūda, kuras dēļ jaunizveidotie uzlādes profili varēja pazust, atsvaidzinot sākumlapas ekrānu.
- LabojumsLabotais ieplānotās uzlādes modālo logu (Classic un EcoCharging), kas tagad tiek pielāgots tā, lai parādītu visu saturu bez nepieciešamības ritināt.
Iepriekšējās versijas 29
-
- JaunumsJauna V2C paziņojumu sistēma, uzticamāka, un paziņojumu atļaujas pieprasīšana jaunākajās Android versijās.
- JaunumsJaunas pieejamās valodas: poļu, lietuviešu, vienkāršotā ķīniešu un čehu.
- JaunumsJauns iecienīto e-Chargers saraksts sadaļā Payments: saglabājiet savus biežāk lietotos e-Chargers ar jebkuru nosaukumu, lai uzsāktu uzlādi vienā solī.
- JaunumsDažas V2C e-Chargers, kas redzami kartē, jau ļauj uzsākt uzlādi tieši, izmantojot V2C Payments.
- JaunumsVar filtrēt pēc V2C e-Chargers kartē.
- JaunumsJauni invertori, kas saderīgi ar dinamisko vadību: SolPlanet, Hoymiles un Huawei ar tiešu WiFi savienojumu (pieejams Trydan versijai 2.5.2 vai jaunākai).
- JaunumsMājas akumulatora pārvaldība paplašināta uz vairākiem invertoriem: Sigenergy (no versijas 2.5.1), un GoodWe, SolarEdge un SolPlanet (no versijas 2.5.2).
- JaunumsJauns brīdinājums Pole Pro ierīcē, kad kabeļa mērītājs neatbild (kļūda 3), pieejams no versijas 6.1.0.
- JaunumsJauns skaidrojums par jauktā uzlādes režīma darbību sadaļā Īpašās opcijas.
- JaunumsGalvenajā ekrānā tagad tiek rādīts pašlaik izmantotā uzlādes profila nosaukums.
- JaunumsStatistikas tagad pareizi rāda negatīvās izmaksas.
- JaunumsVirtuālā asistenta poga var tikt novietota ekrāna malā un atgriezta, kad tā ir nepieciešama.
- JaunumsJauns skaidrojošs ziņojums, kad e-Charger tiek koplietots ar e-pasta adresi, kurai nav konta V2C.
- JaunumsUzlabojumi visā lietotnē: sistēmas joslas, augšējās atkāpes un pielāgošana dažādiem mobilo tālruņu modeļiem.
- UzlabojumsĀtrāka lietotnes palaišana un mazāks resursu patēriņš.
- UzlabojumsJauns datumu atlasītāja dizains globālajā statistikā un katram e-Charger.
- UzlabojumsLielāka Bluetooth savienojuma stabilitāte, novēršot iestrēgšanu savienojuma izveidošanas laikā, strāvas iestatījumu pārbaudes laikā un ierīces e-Charger opciju atvēršanas laikā.
- UzlabojumsLielāka sesijas stabilitāte: novērsta negaidīta sesijas beigšanās pēc ilgstošas lietotnes atrašanās fonā un iestrēgšana, pierakstoties iPhone ierīcē.
- UzlabojumsPole Pro drošāka tīkla konfigurācija: Wi-Fi tīkla un statiskās IP validācija, APN nepieļauj diakritiskās zīmes, un ir uzlabota 4G SIM kartes attēlošana.
- UzlabojumsLabojumi tarifu nosaukumos un attēlošanā, kā arī jaunas krāsas, lai labāk atšķirtu periodus, mainot elektrības tarifu.
- UzlabojumsOptimizācija iekšēji, lai samazinātu lietotnes izmēru.
- AtjauninātsV2C Payments: tagad to var aktivizēt tikai e-Charger administrators, un, to darot, tiek izvēlēta uzlādes punkta atrašanās vieta.
- AtjauninātsV2C Payments: jauns brīdinājums pirms turpināšanas, ja e-Charger nav savienojuma ar internetu vai šobrīd neļauj uzlādēt.
- AtjauninātsLādēšanas prioritāte starp automašīnu un akumulatoru tiek rādīta tikai tad, ja instalācijā ir invertors vai Huawei EMMA mērītājs.
- AtjauninātsSavietojamība ar jaunāko e-Chargers programmaparatūras valodas formātu.
- LabojumsLabojums statistikas saraksta attēlošanā iPhone ierīcēs, kur tas varēja tikt parādīts apgriezts.
- LabojumsLabots attēlotais minimālais jauda, ja tā ir zemāka par 1 kW ierīcē Denka.
- LabojumsLabots brīdinājums par interneta savienojuma zudumu, kas tika rādīts bez iemesla.
- LabojumsNovērsta kļūda, atlasot automašīnu modeļus, kuru nosaukumā ir simbols #.
- NoņemtsLietotne vairs nepieprasa atrašanās vietas atļauju fonā, jo tā nav nepieciešama.
-
- JaunumsUzlabojumi V2C Assistant: jauns informatīvs ekrāns, lai labāk paskaidrotu asistenta darbību.
- JaunumsUzlabojumi dinamiskajā jaudas vadībā: Shelly Pro ierīces arī ir saderīgas ar V3.
- JaunumsUzlabojumi akumulatora iestatījumos: uzlabota saskarne opcijai, kas ļauj novērst, ka lādētājs izlādē mājas akumulatoru, padarot tās darbību skaidrāku.
- JaunumsJauna saderība ar Sigenergy: pievienots Sigenergy kā invertors, kas ir saderīgs ar akumulatora vadību uzlādes profilos.
- JaunumsJauna Solarman invertoru atklāšana: pievienota sistēma, kas konfigurēšanas laikā automātiski nosaka pieejamās Solarman ierīces dinamiskās vadības iestatījumos.
- JaunumsSolarman atklāšana, izmantojot Bluetooth un Wi-Fi: jaunā sistēma ļauj veikt atklāšanu, izmantojot pieejamos savienojumus.
- JaunumsUzlabojumi Solarman konfigurācijā: atrastās ierīces tiek parādītas atsevišķi, lai tās būtu vieglāk atlasīt un konfigurēt.
- UzlabojumsUzlabojumi plānotajā uzlādē: optimizēta laika indikatora darbība plānoto uzlādes laikā.
- UzlabojumsJauna kļūdu apstrāde: uzlabota noteiktu lietotnes izsaukumu darbība, ja rodas statusa kļūdas.
- UzlabojumsUzlabojumi Oasys: optimizēta datu saglabāšana, lai pareizi saglabātu konfigurāciju.
- UzlabojumsUzlabojumi AutoCharge pārvaldībā: atjaunināts AutoCharge funkcijas nosaukums un prezentācija.
- UzlabojumsUzlabojumi koplietošanā: koplietošanas ekrānā pievienota papildu informācija, lai to būtu vieglāk saprast.
- UzlabojumsVizuālie uzlabojumi Solarman atklāšanā: uzlaboti statusi, animācijas, ziņojumi un apstiprinājumi meklēšanas procesa laikā.
- UzlabojumsUzlabojumi kopumā: optimizēta lietotne un novērsītas dažādas kļūdas, lai nodrošinātu stabilāku lietošanas pieredzi.
- AtjauninātsUzlabojumi uzlādes profilos: palielināta maksimālā konfigurējamā jauda līdz 12 kW vienfāzes instalācijās un līdz 36 kW trīsfāzu instalācijās, lai atvieglotu konfigurēšanu franču lietotājiem.
- AtjauninātsJauna atbalsta zona: atbalsta zonas piekļuve ir atjaunināta.
- LabojumsUzlabojumi, koplietojot lādētājus: novērsta problēma, kas varēja izraisīt kļūdas, koplietojot lādētāju.
- LabojumsUzlabojumi kartēs: pievienots tokens un atjaunota kartēm izmantotā piekļuve, lai nodrošinātu to pareizu darbību.
- LabojumsUzlabojumi invertoru konfigurācijā: novērsti dažādi gadījumi, kas saistīti ar savienojuma parametru konfigurēšanu un validāciju.
- LabojumsStabilitātes uzlabojumi: novērsītas vairākas problēmas, kas konstatētas galīgās pārbaudes laikā, piemēram, izmaiņas "Uzlādes veids" speciālajās opcijās netika veiktas pareizi, izmantojot Bluetooth.
-
- JaunumsJaunā parole OCPP savienojumam papildu iestatījumos drošākai konfigurācijai.
- JaunumsJauns paziņojums, ja nav piešķirta atrašanās vietas atļauja, lai atvieglotu ierīces konfigurēšanu.
- JaunumsJauns atgādinājums tērzēšanas robotā, lai atļautu kustību, kad tas ir nepieciešams.
- JaunumsUzlabota autentifikācijas stabilitāte, novēršot vienlaicīgus žetona pieprasījumus un uzlabojot tā iekšējo pārvaldību.
- JaunumsPievienots drošības taimauts pilnvaras (token) iegūšanai, lai izvairītos no bloķēšanās retos gadījumos.
- JaunumsJauna Sigenergy konfigurācijas rokasgrāmata darbam ar Modbus TCP, lai atvieglotu invertora ekspluatācijas uzsākšanu.
- JaunumsJauna saite uz Sigenergy konfigurācijas rokasgrāmatu, kad šis invertors ir izvēlēts dinamiskās vadības iestatījumos.
- JaunumsSaderība ar Sigenergy dinamiskās jaudas vadībā, to pareizi identificējot kā invertoru.
- JaunumsJauni saderīgi invertoru modeļi Azzurro un SofarSolar.
- JaunumsJauns paziņojums, lai nepieciešamības gadījumā restartētu Alva, lai pareizi pabeigtu konfigurāciju.
- JaunumsBluetooth klūdu ziņojumi precīzāki, ja nav iespējams savienoties ar lādētāju.
- JaunumsJaunie Ingeteam invertoru modeļi un savienojuma datu validācija to konfigurēšanas atvieglošanai.
- JaunumsIzvēlne "Pieejamie uzlādes veidi" sadaļā "Īpašās opcijas" (pieejama Trydan versijai 2.5.0 vai jaunākai).
- UzlabojumsUzlabojumi Alva Bluetooth savienojumā ar ātrāku un stabilāku sakaru.
- UzlabojumsTērzēšanas robots tagad piedāvā noderīgākus ieteikumus, uzdodot jautājumus par tavu konfigurāciju un situāciju.
- UzlabojumsUzlabojumi viedtālruņu konfigurācijā un ar savienošanas pārī saistīto tekstu tulkojums.
- UzlabojumsUzlabojumi tulkojumos holandiešu valodā, lai nodrošinātu konsekventāku lietotāja pieredzi.
- UzlabojumsLielāka kontrole pār statistikas nosūtīšanu, saņemot tās caur Bluetooth, novēršot problēmas, ja dati ir bojāti vai nepilnīgi.
- UzlabojumsIekšēja lietotnes optimizācija, lai samazinātu tās izmēru un uzlabotu saderību ar jaunākajām Android ieteikumiem.
- UzlabojumsUzlabota uzlādes profilu jutība, lai izvairītos no segmenta mainīšanas, noklikšķinot uz tā.
- UzlabojumsUzlabojums, kas ļauj precīzi mainīt uzlādes profilu stundas, ja vēlaties.
- UzlabojumsUzlabota datu pārvaldība Alva dinamiskās kontroles datiem, labojot kļūdas to vaicājuma laikā.
- UzlabojumsLielāka noturība, sinhronizējot laiku caur Bluetooth ar Trydan.
- AtjauninātsAtjaunināts akumulatoru uzlādes prioritātes ziņojums uzlādes profilos, lai tas būtu skaidrāks.
- LabojumsLielāka precizitāte dažos slīdņos, labojot datu sūtīšanu, tos tieši nospiežot.
- LabojumsLabojums tukšai kartītei īpašajās opcijās.
-
- JaunumsRādīt, prioritizēt mājas akumulatora uzlādi uzlādes profilos (versija 2.5.0 vai jaunāka).
- JaunumsPievienot detalizētu informāciju par akumulatoru prioritāti uzlādes profilos.
- JaunumsPievienots EMMA kā saderīgs invertors, lai novērstu akumulatoru izlādi.
- JaunumsMaksa par passivitāti pievienota maksājumos.
- JaunumsPievienota COM adrese EMMA mērītājam.
- JaunumsSavienojuma veida nosūtīšana uz ALVA.
- LabojumsNovelā labota kļūda, atverot uznirstošos logus.
-
- JaunumsPievienots integrētais MI tērzēšanas robots.
- JaunumsPievienots uzlādes pabeigšanas reģistrs sadaļā Īpašās opcijas Trydan ierīcēm (versija 2.5.0 vai jaunāka).
- JaunumsPievienota jauna pielāgota tarifa pa periodiem.
- JaunumsOasys grafiku dati, kā tie parādīti vietnē.
- JaunumsJauns lauks "Akumulatora līmenis" pievienots Oasys diagrammā.
- JaunumsPievienota meklēšanas funkcija lietotājiem, kuriem ir daudz lādētāju (vairāk nekā 10).
- JaunumsLappuse numerācija lielu RFID karšu un eKey atslēgu apjoma iegūšanai, izmantojot Bluetooth.
- JaunumsMaksimālās uzlādes strāvas ierobežojuma ziņojums savienotājiem Alva ierīcēm būs 640 A, jo ir divas ligzdas.
- JaunumsUzlabojumi RFID dizainā, lapošanā, meklēšanas dzinējā un atšķirībā pēc veida.
- JaunumsParādīt versijas numuru, uz kuru tiks atjaunināta programmaparatūra.
- JaunumsBluetooth atļaujas pārbaude un lietotāja brīdināšana.
- JaunumsZiņojums par ierobežotu strāvas stiprumu ekrānā modeļiem ar 16 ampēriem.
- JaunumsChint pieejams atkarībā no versijas Denka un Pole modeļiem.
- JaunumsJauns GIF pievienots, lai attēlotu akumulatora izlādi un fotoelektrisko ražošanu.
- UzlabojumsJauns un uzlabots lietotāja interfeiss uzlādes profiliem.
- UzlabojumsUzlabojumi lietotāja pieredzē ekrānā "Enerģijas tarifa" pielāgotajām tarifām.
- UzlabojumsUzlabojumi un optimizācija zvanos, kas tiek veikti Payments darījuma laikā.
- UzlabojumsUzlabojumi Bluetooth savienojumam kopumā.
- UzlabojumsPārvaldības ekrāna dizaina uzlabojums — lietotāju pārvaldība un iespēja administratoram noņemt lādētāju no šī ekrāna.
- UzlabojumsMaksimālās uzlādes strāvas ierobežojums savienotājiem un lietotāja pieredzes uzlabojumi.
- LabojumsNovērst negatīvas vērtības Oasys diagrammās.
- LabojumsLabots nesaskanīgie krāsu toņi Oasys diagrammās.
- LabojumsUzlabota lietotāja pieredze pogai mainot paroli, lai novērstu vairākkārtējus klikšķus.
- LabojumsĀtrāks lietotnes palaišanas laiks, piekļūstot bez tīkla pārklājuma.
-
- JaunumsAkumulatora izlādes pārvaldības paziņojums Ingeteam ārējā lietotnē.
- JaunumsAdministrators var redzēt, vai lādētāju pārvalda uzstādītājs. Pārējie lietotāji var redzēt, kas ir administrators.
- JaunumsJauna etiķete ietilpības datos.
- JaunumsIr pievienoti detalizēti skaidrojumi visos akumulatora laukos.
- JaunumsAtjauninājums uz versiju 2.5.0, lai nodrošinātu saderību ar akumulatora izlādi.
- JaunumsIr uzpievienotas brīdinājuma paziņojumi, lai brīdinātu lietotāju būt uzmanīgam, nospiežot noteiktas jutīgas funkcijas.
- JaunumsOasys pievienoja elektrotīkla pārvaldību tā iestatījumos.
- UzlabojumsUzlabojumi visos Oasys ekrānos
- UzlabojumsUzlabojumi lietotnē (v2c): Enerģijas tarifa ir pievienota Oasys.
- AtjauninātsValidācija RFID un eKey garumam (vismaz 3 rakstzīmes).
- AtjauninātsIngeteam un EMMA ir paslēptas no saderīgo invertoru saraksta akumulatora izlādēšanai.
- LabojumsLabot kļūdu, kad tika rādīts ziņojums "Izvairīties no akumulatora izlādes".
- LabojumsLabota kļūda, saglabājot iestatījumus ar Goodwe invertoru.
- LabojumsLabots kļūda, kuras dēļ galvenā metode tika izpildīta cilpā pat pēc izejas no ekrāna.
- LabojumsIr novērsts jaudas ierobežojums Denka modelī (paslēpts, bet pabeigts).
- LabojumsIr uzdots pastāvīgi paslēpt strāvas stiprumu maksājumu ekrānā.
- LabojumsIr atrisināta iespējamā drošības ievainojamība.
-
- JaunumsNorādīts, ka statistikā ir notiekoša uzlāde.
- JaunumsTagad statistikā parādās RFID karšu nosaukums.
- JaunumsPabeigti galvenie akumulatoru ekrāni ar reāliem datiem.
- JaunumsPievienota atzīme (checkbox), lai novērstu akumulatoru izlādi no versijas 2.4.7 dažiem invertoriem
- UzlabojumsLielāka stabilitāte programmaparaugu atjauninājuma attēlošanā (atjaunināšanas opcija parādīsies tikai tad, ja pašreizējā versija ir stingri zemāka par pēdējo stabilo versiju, kas ir ražošanā).
- AtjauninātsĻaut redaktoriem mainīt enerģijas tarifu.
- LabojumsLabota kļūda GIF failā bez fv.
-
- JaunumsAzurro un Sofar Solar invertoru atdalīšana.
- JaunumsPārāk garu kodu pievienošanas novēršana RFID vai eKeys gadījumā un lietotāja pieredzes uzlabošana.
- JaunumsJauns invertors Azurro.
- JaunumsUzlabot plūstamību kartes izvēlnēs.
- JaunumsPalielināta modāļu logu izmērs, lai uzlabotu datu attēlošanu.
- JaunumsJauns uzlabots statistikas dizains.
- JaunumsPievienots jauns Huawei EMMA skaitītājs.
- JaunumsInvertora veida nosaukuma maiņa uz Sunny SMA.
- JaunumsPievienots transportlīdzekļa numurs.
- JaunumsPievienots fotovoltaikas (PV) veids, ko jūsu uzlādes profilos izmanto katrā brīdī GIF animācijā.
- JaunumsLapošana pabeigta RFID funkcijai Denka un Pole Pro ierīcēm
- JaunumsJauni Fronius tipi, ierobežoti uz versijām, kas ir augstākas par 2.4.2
- UzlabojumsUzlabota elektriskā transportlīdzekļa informācijas attēlošana.
- UzlabojumsUzlabojumi itāļu valodas tulkojumos.
- UzlabojumsVispārēja tulkojumu uzlabošana.
- UzlabojumsLietojamības uzlabojumi un pogu pārvietošana EcoCharging sadaļā
- UzlabojumsUzlabots datu paraugu ņemšanas process maksājumiem
- LabojumsLabota autocharge statusa pārbaude (šajā gadījumā tā nebūtu jāveic).
- LabojumsLabots kļūdu elektriskā automobiļa datos.
- LabojumsAtjauninājums žetona galapunktam visā lietotnē.
- LabojumsLabojta kļūda opciju ekrānā ar MAC adresēm Pole ierīcēs.
- LabojumsUzlabota saderība ar lielekrāna ierīcēm.
- LabojumsDrošās zonas iestatījumi iOS.
- LabojumsNovārstēta problēma end-to-end operētājsistēmā Android 15.
- LabojumsAtjauninātas novecojušās end-to-end API.
- LabojumsPievienotas drošās zonas (safe areas), lai novērstu pārklāšanos ar sistēmas joslām.
- LabojumsNovērsta kritiska drošības ievainojamība Android lietotnē.
- LabojumsPaslēpts uzlādes mērķis, ja nav atbilstošas versijas (2.4.3)
- LabojumsNovelā versijā labota kļūda, mēģinot atjaunināt programmaparatūru, izmantojot lokālo Wi-Fi tīklu.
-
- JaunumsPievienota informācija par izmaksām uzlādes laikā lietotājiem ar fotoelektrisko sistēmu.
- JaunumsMapbox tokena maiņa meklēšanai kartē.
- UzlabojumsBluetooth savienojuma paātrināšana.
- UzlabojumsUzlabojumi BLE savienojuma pārī savienošanas dizainā.
- UzlabojumsRefaktorizācija
- UzlabojumsBluetooth savienojuma optimizācija iOS ierīcēs.
- UzlabojumsTulkojumu uzlabošana atbilstoši kontekstam visās valodās.
- AtjauninātsIzmaiņas V2C Business Panel atrašanās vietā: tagad galvenajos iestatījumos.
- LabojumsLabots kļūda, konfigurējot V2C Business Panel.
- LabojumsLabota kļūda ielādes mērķa izvēles rūtiņā.
- LabojumsLabots kļūdu RFID/eKeys ekrānā ALVA ierīcēm.
- LabojumsLabots kļūdu, kad kartes izvēlnes pārklājās ar iPhone izlaidumu (notch).
- NoņemtsPakārtotās ierīces atjaunināšana paslēpta
-
- JaunumsGatavs logrīks un darbojas Android un iOS.
- JaunumsPievienots MI tērzēšanas robots (chatBot) biežāk uzdoto jautājumu atbalstam.
- JaunumsPaskaidrojums un brīdinājums par Linky skaitītāju.
- JaunumsJaunie protokoli Goodwe invertoram.
- JaunumsJaunas saites uz jaunajiem „Informatīvajiem videoklipiem”.
- JaunumsJauns ekrāns cargātāju savienošanai pēc Bluetooth tuvuma.
- JaunumsJauns ekrāns laika joslas iestatīšanai.
- JaunumsPievienots Alva modeļu klāstam
- JaunumsJauna iespēja savienot savu e-Charger ar uzņēmumu.
- JaunumsDivi jauni Fronius invertora apakštipi.
- JaunumsJauns tarifs Francijai: Tempo EDF
- UzlabojumsLabākais UX dizains klasiskai ieplānotai uzlādei
- UzlabojumsUzlabota datu sūtīšana un dinamiskās vadības brīdinājumi.
- UzlabojumsKoda daļas refaktorizācija.
- UzlabojumsDažu nepareizu etiķešu uzlabojumi visās valodās.
- UzlabojumsUzlabota avārijas pogas nospiešanas brīdinājuma attēlošana Denka ierīcēs.
- UzlabojumsUzlabots kļūdu attēlojums, koplietojot lādētāju, lai parādītu konkrētākus paziņojumus.
- AtjauninātsIOS bibliotēku atjaunināšana.
- AtjauninātsJauns dizains transportlīdzekļa informācijas pievienošanai
- LabojumsStatistikas aprēķini balstās uz sākuma datumu, lai ieraksts tiktu iekļauts noteiktā laika intervālā.
- LabojumsLabots kļūda, ievadot tukšu SSID Pole un iOS ierīcēs.
- LabojumsVācu valodas tulkojumi ir laboti.
- LabojumsNovērsta kļūda kartē iPhone tālruņos.
- LabojumsLabots kļūdas attēlojumā izmaksu statistikā.
-
- JaunumsPievienots brīdinājums par aktivizētu avārijas pogu Denka.
- JaunumsAutocharge funkcija: Pilnvarotu transportlīdzekļu saraksts Denka.
- JaunumsJauna plūsma fotoelektriskās sistēmas shēmā.
- JaunumsKopīgot lādētāju tieši, nosūtot e-pastu.
- JaunumsUzlabojumi manuālai statistikas augšupielādes žurnāliem.
- UzlabojumsUzlabots slodzes skeleta ielādes ekrāns sākumlapā
- UzlabojumsLabākais paskaidrojums par strāvas stiprumu pa fāzēm
- UzlabojumsTulkojumu uzlabošana itāļu valodā
- UzlabojumsNoņemts orientācijas ierobežojums, lai nodrošinātu labāku saderību ar dažiem planšetdatoriem
- AtjauninātsAtjauninājumi bibliotēkām
- AtjauninātsAtjaunota Firebase bibliotēka lielākai drošībai.
- AtjauninātsPareizā secība statiskās IP konfigurācijas iestatījumos.
- LabojumsLabojums kļūdai, kas radās, atjauninot EcoCharging noteiktā laikā
-
- JaunumsPievienots G2 tips Goodwe invertoram
- JaunumsPievienots uzlādes ierobežojums Denka ierīcēm
- JaunumsDenka akumulatora ietilpības paraugs.
- JaunumsDenka uzlādes atlikušā laika attēlojums
- UzlabojumsLielāka atstarpe apakšējā izvēlnē dažām ierīcēm
- UzlabojumsUzlabojums apakšējās izvēlnes skatam lietotājiem ar ļoti lielu fonta izmēru
- AtjauninātsIzmaiņas Solis invertora tipā
- AtjauninātsIzmaiņa statistikas datu atlasē: endCharge tiek ņemts vērā tāpat kā serverī.
- AtjauninātsIzmaiņas servera izsaukumos, bez slīpsvītras beigās
- AtjauninātsModo pamodināšana paslēpts
- AtjauninātsPaslēpts tips „Kopīgie reģistri” DEYE invertorā
- AtjauninātsGPS nav obligāts nosacījums lietotnes lejupielādei.
- AtjauninātsVairs nav nepieciešams norādīt lietotāja zonu elektriskā transportlīdzekļa iestatījumos.
- LabojumsLabots kļūdas datu iegūšanā sadaļā Īpašās opcijas
- LabojumsKļūdu novēršana nelielās problēmās
-
- JaunumsĻaut papildināt SIM kartes datus bez pieslēgta e-Charger
- JaunumsJaunie brīdinājuma ziņojumi jutīgām funkcijām
- UzlabojumsVispārējs stabilitātes uzlabojums
- AtjauninātsIzmaiņas īpašības nosaukumā uz term_resistor
- LabojumsApakšējā izvēlne vairs nepārklājas ar informāciju
-
- UzlabojumsPilnīga tulkojumu uzlabošana portugāļu valodā
- UzlabojumsKopējs tulkojumu uzlabojums franču valodā
- UzlabojumsDaļēji uzlaboti tulkojumi vācu valodā
- LabojumsNovinkas: novērsta kļūda, mainot jaudu Denka ierīcēs
- LabojumsLielāka kļūdu kontrole kartē
-
- JaunumsTrydan fāzu karte
- JaunumsĻaut pakārtotajiem lādētājiem mainīt maksimālo un minimālo strāvas stiprumu
- JaunumsPiekļuves ierobežojums uzlādes profiliem negalvenajiem lādētājiem un strāvas stipruma ierobežojumu nodalīšana
- JaunumsIzmaiņas un brīdinājums par DEYE invertoru veidiem
- JaunumsPievienots BUS termināļa pretestības skats dinamiskās vadības sadaļā
- JaunumsUzlabota datu ielāde tīkla ekrānā
- JaunumsTrydan lokālā slodzes balansēšana, BUS gala rezistora statusa rādīšana
- JaunumsUzlabota robustums statistikas sūtīšanā caur Bluetooth
- JaunumsJauns sākuma ekrāns (splash screen) ir iestatīts un optimizēts
- JaunumsUzlabota lietotnes atsākšana, neaizverot to pilnībā; jauni pabeigti dizaini ar pielāgojamu fona ekrānu
- JaunumsJaunā loģika ierīces galvenajā ekrānā
- JaunumsJauns datu ielādes dizains sākumlapā
- JaunumsPabeigts pārdevēju filtrs
- JaunumsPievienoti skeleti (Modernā datu ielāde) galvenajos ekrānos
- JaunumsJauni servera izsaukumi, darījumu grupēšana un lapošana
- JaunumsJaunas servera izsaukumi, rēķinu saraksts un lejupielāde pēc veida
- JaunumsStatistikā pievienots pulkstenis blakus laikam, simbols € nomainīts uz vispārīgu valūtas simbolu, un tagad vispārīgajā statistikā ir pieejams statistikas saraksts.
- JaunumsJauns tips DEYE un jauns Linky skaitītājs pievienots
- JaunumsLietotne ir tulkota basku valodā un pārstrukturēta, lai atvieglotu jaunu valodu pievienošanu
- JaunumsPievienotas jaunas enerģijas tarifas
- JaunumsPievienots jauns ekrāns bezmaksas maksājumu apstiprināšanai
- JaunumsPievienots vēl viens tips Goodwe invertoram
- JaunumsBrīdinājums restartēšanas ziņojumā e-Charger
- JaunumsJaunās tarifas aprēķina pareizu cenu uzlādes ekrānā.
- UzlabojumsDizaina uzlabojumi un uzlabojumi visos iPhone ekrānos ar Dynamic Island
- UzlabojumsUzlabojumi statistikas attēlošanā
- UzlabojumsUzlabota statistikas attēlošana ilgiem laika periodiem
- UzlabojumsUzlabojumi skeleton ielādes elementos
- UzlabojumsInvertori un skaitītāji alfabētiskā secībā
- UzlabojumsIzdevīga EcoCharging ietaupījuma cena un iespēja atsākt uzlādi jebkurā stāvoklī
- UzlabojumsUzlabojumi ierīces galvenajā ekrānā
- UzlabojumsUzlabojumi LetMeCharge
- AtjauninātsPārstrukturēšana galveno ekrānu
- AtjauninātsBatērijas ietilpības nosūtīšana kā skaitlis, nevis teksta virkne
- AtjauninātsPārslēgtas uz jaunajām servera transakciju izsaukšanām
- LabojumsPaslēpt Modifikācijas tipu Portugāle
- LabojumsIzlabotas strāvas robežvērtības galvenajā ekrānā un pārveidots un refaktorēts iestatījumu ekrāns
- LabojumsLabots skaitliskās ievades tips dažos laukos, kuros varēja ievadīt tekstu.
- LabojumsLabots kļūdu, atlasot uzlādes profilus: sākumā vienmēr tika izvēlēts režīms "darbdienas".
- LabojumsLabotas kļūda fotoelementu GIF attēlā
- LabojumsLabojums marķiera atjaunināšanā
- LabojumsNovelts: labots kļūdas, rādot programmaparatūras versiju
- LabojumsLabotas kļūda, mainot kešatmiņu
- LabojumsNo rādīt bloķēšanu, ja lādētājs nav savienots (Wi-Fi vai Bluetooth), un novērsta kļūda, rādot jaudas līmeni
- LabojumsIzvairīties no ekrāna bloķēšanas interneta savienojuma dēļ statistikā
- LabojumsNovilicu kļūdu, kas radās, rādot statistiku.
- LabojumsNovelīts kļūdas labojums dinamiskajā vadībā, nedefinēta IP adrese
- LabojumsLabotas nelielas kļūdas
- NoņemtsEkrānu, kas netiek izmantoti, noņemšana
- NoņemtsNoņemta kartīšu apmale
- NoņemtsNoņemti nevajadzīgie elementi
- NoņemtsNoņemts strāvas ierobežojums uz fāzi, kad lādētājs ir vienfāzes.
-
- JaunumsJaunas atļaujas un ierobežojumi atkarībā no e-Charger modeļa un lietotāja lomas
- JaunumsMaksimālās un minimālās jaudas ierobežojums Denka
- JaunumsAnimācija bez lādētājiem, pielāgota jaunajam dizainam
- JaunumsJauna dinamiskās vadības funkcija Trydan ierīcēm ar versiju virs 2.3.0
- JaunumsPievienota karte (drīzumā būs pieejama)
- JaunumsJauns dizains ar apakšējo izvēlni
- UzlabojumsRefaktorizācija koda labākai uzturēšanai
- UzlabojumsUzlabota savienojuma atjaunošana starp galvenajiem ekrāniem
-
- AtjauninātsAtjauninājums iOS SDK, lai varētu publicēt.
- LabojumsLabots kļūdu EcoCharging plāna izveidē.
- LabojumsLabots fonta izmērs dažos ekrānos.
- LabojumsLabots kļūda, atlasot statisko vadību Pole Pro.
- LabojumsNovērsts kļūda, kas radās, pieprasot atrašanās vietu operētājsistēmā Android 14.
- NoņemtsPilnīga lietotnes dzēšana slodzes sadalei starp lādēšanas punktiem (tagad tā ir iekļauta dinamiskās vadības darbībā).
-
- JaunumsSērijas numurs pievienots Enphase invertoram.
- JaunumsDiagramma statistikas pievienots sadaļā EcoCharging.
- JaunumsLietotnes refaktorēšana un jauns veids, kā attēlot dinamisko vadību atkarībā no e-Charger versijas un modeļa.
- JaunumsItālu valodas pievienošana Pole Pro
- JaunumsLīdzīpašnieki var rediģēt savu kredītkarti.
- JaunumsNeatļaut konfigurēt uzlādes profilus ierīcei, kas nav Maestro.
- UzlabojumsUzlabotie Bluetooth zvani Pole Pro.
- UzlabojumsLielāka uzticamība, iegūstot statistiku, izmantojot Bluetooth.
- UzlabojumsAtsauču izsaukumu pārstrukturēšana.
- UzlabojumsTulkojumu uzlabojumi.
- UzlabojumsLielāka uzticamība, mainot ieplānoto uzlādi.
- UzlabojumsUzlabota lietotnes palaišanas ātrums.
- UzlabojumsUzlabojumi savienojuma iestatījumu ekrānā.
- LabojumsLabots PDF rēķinu lejupielādes process.
- LabojumsKļūda ar baltu ekrānu, konfigurējot savienojumu, ir novērsta.
- LabojumsLabots kļūdu, atjauninot caur vietējo Wi-Fi.
- LabojumsNovērsta nekonsekvence saistībā ar OCPP: funkcija tika rādīta kā ieslēgta, lai gan pa Bluetooth tā nebija ieslēgta.
- LabojumsLabota izmaksu attēlošana grafikos ar fotoelektriskās enerģijas statistiku.
- NoņemtsLīdzsvarošanas novēršana starp uzlādes punktiem Pole, tagad tā notiek automātiski, izmantojot dinamisko vadību.
-
- JaunumsAtļaut dzēst e-Charger, ja Cloud dinamiskā vadība ir aktivizēta un Jūs neesat administrators
- UzlabojumsIzvairīties no pārmērīgiem izsaukumiem sākumlapā ar vairākiem e-Chargers
- UzlabojumsKļūdu kontrole, rediģējot RFID kartes vai Bluetooth atslēgu piekariņus
- AtjauninātsAtjaunināt Denka minimālo strāvu uz 1kW
- AtjauninātsAtjauninājumi bibliotēkās un optimizācijas uzlabojumi
- AtjauninātsAtļaut jaudas virs 100 kW uzlādes profilos
- LabojumsNovelība: labojām kļūdu, augšupielādējot statistiku pa Bluetooth
- LabojumsLabots kļūdu, iegūstot datus no Shelly Pro dinamiskās kontroles režīmā
- LabojumsNovērsta kļūda, pievienojot pirmo uzlādes profilu, izmantojot Bluetooth
- LabojumsNovināts kļūda, lejupielādējot rēķinus jebkurā mobilajā ierīcē
- LabojumsNovērsta baltā ekrāna kļūda, pievienojot Pole
-
- JaunumsJauna funkcija, pievienots "Modo despertar".
- JaunumsAtspējot paziņojumus, ja izrakstās no sistēmas.
- UzlabojumsUzlabota optimizācija, lielāks ātrums.
- LabojumsNovērsta kļūda, iegūstot statistiku pa Bluetooth, izmantojot diskriminēšanu ar fotovoltaiku.
- LabojumsLabots kļūdu, kas radās, atjauninot ziņojumu (reported), kad tiek veiktas izmaiņas īpašumā.
-
- JaunumsStatistikā izmaksas tiek aprēķinātas, piemērojot saules enerģiju (PV), un tiek parādīts arī ietaupījums.
- JaunumsIespēja mainīt LED intensitāti
- JaunumsIr iespējams iestatīt citu COM adresi DDSU666-H skaitītājam.
- JaunumsPievienoti Fronius invertoru veidi
- JaunumsJauns Denka e-Charger pievienots
- JaunumsJaunas tarifas pievienotas (indeksētā un OMIE)
- JaunumsJaunas e-Charger Denka īpašības pievienotas
- JaunumsJauni invertori pievienoti
- JaunumsBrīdinājums par EcoCharging aktivizēts
- JaunumsPievienots EcoCharging plāna skats
- JaunumsIntegrācijas funkcijas Denka
- JaunumsTagad paziņojumi ir sadalīti pēc veida, un lietotājs tos var izvēlēties pēc saviem ieskatiem.
- JaunumsJaunu ekrānu tulkojumi.
- JaunumsDažas opcijas ir atspējotas, ja ir aktivizēta dinamiskā vadība ar Cloud.
- JaunumsBrīdinājuma ziņojums, mainot OCPP iestatījumus.
- JaunumsPievienoti Deye invertora veidi dinamiskajā jaudas vadībā
- JaunumsPievienots datuma filtrs darījumiem.
- JaunumsPievienots jauns Shelly pro skaitītājs dinamiskās jaudas vadībai
- UzlabojumsUzlaboti franču valodas tulkojumi.
- AtjauninātsAtjauninājums uz versiju 2.2.7
- AtjauninātsPieteikuma veidlapa e-pasta adreses verifikācijas nosūtīšanai atjaunota
- AtjauninātsIzmaiņas tekstos par 4G un Ethernet.
- LabojumsKļūda izlabota, attēlojot akumulatora uzlādi GIF failā.
- LabojumsNovērsa kļūdu RFID ekrānā, kurā ielāde iestrēga un turpinājās bezgalīgi.
- LabojumsMainīts teksts mēneša rēķinos un novērsta noklusējuma mēneša problēma rēķinos.
- LabojumsNovērsta kļūda, kad serveris neizdodas pieprasot MAC adresi, un kad JSON neizdodas pieprasot „reported” caur Bluetooth.
-
- UzlabojumsTulkojumu uzlabojumi
- LabojumsIr novērsta problēma ar laika maiņu, rediģējot laikus uzlādes profilos.
-
- JaunumsPievienoti tipi invertoram Greenheiss un invertoram SAJ
- JaunumsPievienota ion-range vadība jaudas izvēlei slodzes profilos
- JaunumsJauni savienojuma veidi Trydan Pro (4G un Ethernet)
- JaunumsIerīces e-Charger restartēšanas brīdinājums Wi-Fi konfigurēšanas laikā
- JaunumsAtjaunināt statistiku, lai nodrošinātu lielāku stabilitāti
- JaunumsLaika pagarināšana, lai pievienotu e-Key lielākai uzticamībai
- UzlabojumsUzlaboti tulkojumi
- UzlabojumsUzlabo lietotāja ziņojumus e-Keys
- AtjauninātsRFID kartes un e-Keys var pievienot, rediģēt un dzēst bez nepieciešamības tās aktivizēt
- LabojumsLabots kļūdas, zem kuras nerādījās ieplānotais laiks Pole Pro.
- LabojumsNovināts labojums laika joslas kļūdai uzlādes profilos (galvenokārt Portugālē).
-
- JaunumsIzveidots jauns uznirstošais apmācības logs, kas paredzēts situācijām, kad lietotājam nepieciešams sniegt sīkāku skaidrojumu.
- JaunumsIelādes profilu kļūdu pārvaldība, lai brīdinātu lietotāju, ja kaut kas nav pareizi saglabāts.
- JaunumsFotovoltaika apvienota slodzes profilos Pole Pro.
- JaunumsBluetooth lokalizācijas uzlabojums dažiem tālruņiem, un tiek parādīta kļūda, ja Bluetooth savienojums neizdodas.
- JaunumsPievienoti COM 1 un COM 11 tipi Huawei Chint skaitītājam dinamiskajā jaudas vadībā.
- JaunumsPaslēpts fotovoltaikas GIF Pole Pro modeļiem.
- JaunumsPieejama iespēja pievienot brīvu COM adresi Huawei invertoram.
- JaunumsPievienota iespēja iestatīt statisko IP adresi Pole Pro.
- JaunumsPievienots jauns ziņojums GIF attēlā, kad nav fotoelektriskās ražošanas.
- JaunumsPievienoti jauni tulkojumi.
- JaunumsPievienota informācija lietotājam par statiskās IP adreses konfigurēšanu Pole Pro.
- JaunumsPievienots 'car topic' MQTT konfigurēšanai dinamiskās jaudas vadībā.
- UzlabojumsUzlabojums vārdnīcu formātā (iekšējais kods).
- UzlabojumsUzlabojumi uzlādes profilu saglabāšanā: caur Bluetooth nebija iespējams saglabāt uzlādes profilus ar vairāk nekā 5 segmentiem.
- UzlabojumsVispārēja lietotnes veiktspējas uzlabošana un koda optimizācija.
- AtjauninātsJauna paziņojumu pārvaldība pa ierīcēm, nevis pa kontiem, un to atteikšanās, noņemot savienojumu.
- AtjauninātsPārslēgšana no localStorage uz sessionStorage Bluetooth ID glabāšanai, lai nodrošinātu stabilāku savienojumu.
- AtjauninātsNosaukuma maiņa no „V2C skaitītājs 2.0“ uz „V2C ControlBox“.
- LabojumsNovinātā kļūda, nosūtot MQTT lietotāja vārdu un paroli dinamiskās vadības režīmā, ir novērsta.
- LabojumsLabots kļūdu, kas rādīja statistiku, kura sākās plkst. 00:00.
- LabojumsLabot kļūdu, mainot valodu: dažkārt nerādījās saglabāšanas poga.
- LabojumsLabots kļūda, kas radās, sūtot Shelly veidu dinamiskajā vadībā.
-
- JaunumsKopīgot lādētāju pieejamu sadaļā "Lietotāja pārvaldība".
- JaunumsProceso V2C Payments atveras tajā pašā lietotnē, lai lietotājam maksājuma process būtu ērtāks. (Tas nedarbojas, ja lietotājam mobilajā tālrunī noklusējuma pārlūks ir MI Browser; darbojas Google Chrome un Safari.)
- JaunumsPievienots paziņojums lietotājam, lai atsāktu uzlādi, ja ir aktivizēts V2C Payments.
- JaunumsJaunas valodas, kas pieejamas Trydan.
- JaunumsDinamiskā jaudas vadība un uzlādes profili pieejami Pole Pro.
- JaunumsPievienota Trydan saderība ar Enphase invertoriem.
- JaunumsPievienota Trydan saderība ar P1 skaitītāju.
- JaunumsPievienota Trydan saderība ar Modbus skaitītāju feeder.
- JaunumsPievienotas jaunas papildu konfigurācijas MQTT.
- JaunumsDiferenciācija pēc veidiem Solis invertoram (ar vai bez akumulatoriem).
- JaunumsRumāņu valoda pievienota Trydan.
- JaunumsPole Pro mājaslapas "Īpašās opcijas" sadaļā pievienota fāzu kartējuma konfigurācija.
- JaunumsIeviešana DeadLetters lietotāju kļūdu reģistrēšanai fonā.
- JaunumsJaudas pakāpes ar strāvas ierobežojumu Pole Pro.
- JaunumsPievienota opcija bez skaitītāja dinamiskajā jaudas vadībā Pole Pro.
- JaunumsSvarīgi brīdinājumi, mainot dinamiskās vadības iestatījumus, lai uzlabotu lietotāja pieredzi.
- JaunumsJauns ekrāns, pieejamo vergu saraksts Pole Pro ierīcei, kad tā darbojas kā Master.
- UzlabojumsĀtrāka uzlāde no konfigurācijas arī bez interneta savienojuma.
- UzlabojumsBūtiska uzlabojuma Bluetooth atslēgu piekariņu stabilitātē gan Wi-Fi, gan Bluetooth savienojumā.
- UzlabojumsUzlabots dizains īpašajām opcijām.
- UzlabojumsUzlabota Bluetooth meklēšana un savienošana iOS ierīcēs.
- UzlabojumsUzlabojumi dažās Bluetooth metodēs.
- UzlabojumsUX uzlabojums, mainot e-Charger nosaukumu.
- UzlabojumsUzlabota Bluetooth stabilitāte Pole Pro.
- AtjauninātsMaiņa no kW uz W akumulatoru izlādē.
- AtjauninātsMaiņa no „Dinamiskās vadības konfigurācija“ uz „Uzlādes profili“.
- AtjauninātsNosaukuma maiņa: tagad Bluetooth atslēgu piekariņus sauc par e-Keys.
- AtjauninātsPalielināts Bluetooth skenēšanas laiks galvenajā ekrānā.
- LabojumsLabots kļūdu, kas radās, atsvaidzinot lapu, ja nav pievienots neviens lādētājs.
- LabojumsLabots kļūda, kas radās, izmantojot mobilā tālruņa atpakaļ pogu dažos ekrānos.
- LabojumsRFID kartīšu vai atslēgu piekariņu saraksta atjaunināšana to aktivizēšanas brīdī.
- LabojumsUzlabota rēķinu skata funkcionalitāte angļu valodā.
- LabojumsNedrīkst dzēst e-Charger, ja lietotājs ir bezsaistē.
- LabojumsĻaut iespējot lādētāju no iekšpuses, kad ir aktivizēta automātiskā bloķēšana.
- NoņemtsDzēsts ziņojums par autostāvvietu V2C Payments, ja autostāvvieta ir bezmaksas, lai izvairītos no neskaidrībām.
-
- JaunumsPapildinājums: alternatīvs skaitītājs SolarEdge sistēmai dinamiskajā jaudas vadībā.
- JaunumsPievienota apstiprināšana pirms programmaparatūras atjaunināšanas.
- JaunumsVairāk un labāki tulkojumi.
- JaunumsKļūdu kontrole maksājumos.
- JaunumsPievienots jauns attēls Google Home.
- UzlabojumsUzlabota savienojamība un Wi-Fi signāla uztveršana sākuma ekrānā.
- UzlabojumsIestatījumu ekrāns bezsaistē tiks ielādēts ātrāk.
- AtjauninātsApvienot vienā ekrānā RFID karšu aktivizēšanu un to rediģēšanu. (Tas pats attiecas uz Bluetooth atslēgu piekariņiem.)
- AtjauninātsHuawei tipa maiņa uz COM adresi.
- AtjauninātsPēc e-Charger restartēšanas atgriezties sākuma ekrānā.
- AtjauninātsMainīšanās notiek, kad Payments veicam bezmaksas darījumu.
- AtjauninātsNevar mainīt maksājumus, ja nav interneta savienojuma.
- LabojumsLabots kļūdu: vaicājums par Huawei tipu jebkuram skaitītājam vai invertoram.
- LabojumsLabots kļūdu, rādot uzlādes statistiku par uzlādēm, kas veiktas no plkst. 22:00 līdz 00:00.
- LabojumsLabots kļūda, kad jaudas posma nosaukums tika atstāts tukšs.
- LabojumsNovērsta Payments kļūda saistībā ar bezmaksas tarifu.
- LabojumsNovelā mēs esam novērsuši kļūdu saistībā ar laika joslu statistikā.
- LabojumsSalabotas nelielas kļūdas.
-
- JaunumsJaudas līmeņos tagad ir jauns fotovoltaiskās (PV) veids, ko sauc par „Bez injekcijas vai izolēts”.
- JaunumsJaudas diapazoni tiek saglabāti serverī un kešatmiņā, lai tie darbotos pareizi jebkurā ierīcē un jebkurā situācijā. (Ar internetu, bez interneta, ar Bluetooth u. c.)
- JaunumsPievienoti Bluetooth atslēgu piekariņi Trydan lādētājiem.
- JaunumsPievienoti informatīvi ziņojumi lietotājam, lai uzlabotu lietošanas pieredzi.
- JaunumsPilnvara tiek pieprasīta tikai reizi minūtē vai ievadot lietotnē, un tā tiek saglabāta kešatmiņā, lai nodrošinātu lielāku ātrumu (iepriekš tā tika pieprasīta katrā HTTP izsaukumā).
- JaunumsPievienota iespēja restartēt e-Charger sadaļā "Īpašās opcijas".
- JaunumsGoogle Home jau ir pieejama, un attiecīgā informācija ir pievienota lietotnē.
- JaunumsStingrāka kļūdu kontrole dažos ierakstos, lai lietotājam būtu lielāka pārskatāmība.
- UzlabojumsUzlabota statistikas iegūšana un augšupielāde, izmantojot Bluetooth.
- UzlabojumsUzlabota stabilitāte dažiem Bluetooth savienojumiem
- UzlabojumsUzlabots maksājumu ekrānu dizains.
- AtjauninātsFotovoltaikas GIF attēlā vērtība netiks rādīta, ja dati ir 0 vai nulles vērtība.
- AtjauninātsJa ierīces valoda ir basku valoda, lietotne pēc noklusējuma tiks iestatīta spāņu valodā (iepriekš tā tika iestatīta angļu valodā).
- LabojumsLabots GIF ar fotoelementiem, kas dažās iOS ierīcēs iestrēga.
- LabojumsLabojumi nelielām kļūdām.
-
- JaunumsPievienota IP adrese WiFi informācijai.
- JaunumsŅemiet vērā stāvvietas izmaksas pēc uzlādes V2C Payments.
- JaunumsStatiskās IP adreses skaidrojums Shelly.
- JaunumsReāla laika atjauninājums par maksājumu statusu galvenajā ekrānā.
- JaunumsJauni invertori pievienoti.
- JaunumsIzmaiņas Shelly invertora tarifās.
- UzlabojumsUzlabota Bluetooth savienojuma atjaunošana galvenajā ekrānā iOS sistēmā.
- UzlabojumsIr atšķirīga iespēja bloķēt lādētāju: velkot vai noklikšķinot.
- UzlabojumsUzlabota Bluetooth savienojuma stabilitāte dažiem zvaniem, kuri dažkārt neizdevās.
- AtjauninātsPogas maksājumiem bez lādētājiem lielāka.
- AtjauninātsLabots jaunais QR formāts.
- AtjauninātsIespēja mainīt OCPP, izmantojot Bluetooth, ierīcē Trydan.
- AtjauninātsIzmaiņas V2C Payments ekrāna dizainā
- LabojumsLabotas push paziņojumi iOS ierīcēs.
- LabojumsLabota problēma ar Google pieteikšanos iOS ierīcēs, kopīgojot lādētāju.
- LabojumsLabota kļūda ar PVPC 2 formātu.
- LabojumsLabots kļūdu, mainot tarifas.
- LabojumsLabots kļūdu maksājumu rēķinu lejupielādē.
-
- JaunumsJauni invertori pievienoti
- JaunumsJauns brīdinājums, ja Bluetooth statistika ir veiksmīgi iegūta
- JaunumsTikai pēc Bluetooth aktivizēšanas tiek prasīta lokalizācija.
- JaunumsŅemiet vērā akumulatorus fotovoltaikas GIF animācijā.
- UzlabojumsLielāka konsekvence datu sūtīšanā un saņemšanā, izmantojot Bluetooth
- UzlabojumsNeļaut lietotājam ievadīt tukšu RFID nosaukumu un jaunus tulkojumus
- LabojumsNovērsu Bluetooth statistikas iegūšanas kļūdu.
- LabojumsNovāctas problēmas ar fotoelementu (PV) GIF animācijām
- LabojumsLabojums paziņojumiem
V2C Cloud tīmekļa portāls
Pašreizējā versija 4.1.1 · Versijas: 45, pirmā: 2020. gada decembris
- JaunumsActivate or deactivate the default rate for each e-Charger in Payments.
- JaunumsEcocharging plan available for Oasys batteries.
- UzlabojumsUpload your own invoices in the Invoices section of Payments.
Iepriekšējās versijas 44
-
- JaunumsMandatory location for e-Chargers in Payments.
- JaunumsMake the charger public from Payments so that it is visible on other platforms.
- JaunumsAssign a different rate to each group in Payments.
- JaunumsMonthly fee rate within Collective Charging.
- UzlabojumsNew design for the Payments platform.
- 4.0.4UzlabojumsNew way to configure the Ingeteam inverter.
-
- JaunumsItalian tariffs.
- 4.0.2JaunumsRates by periods.
- 4.0.1JaunumsBattery prioritization in charging profiles.
-
- UzlabojumsNew design of the portal v2c.cloud.
- UzlabojumsSupport for viewing on mobile devices.
-
- JaunumsNew Sofar Solar inverter.
-
- JaunumsSelect time zone, manually or automatically.
- JaunumsNew Huawei Emma inverter.
- JaunumsNew Azzurro inverter.
- UzlabojumsIncrease in code size on RFID cards.
-
- UzlabojumsNew rates added.
-
- UzlabojumsNew PDFs in Spanish and English in Payments.
- LabojumsCharging power limit on Denka.
-
- JaunumsCharging stops upon reaching the selected percentage for Denka models.
- JaunumsTPV icon.
- JaunumsPossibility to see more chargers on the main page.
- JaunumsCalculator in Payments rates.
- UzlabojumsSelection of the auto-lock time for Trydan with version 2.3.25 or higher.
-
- UzlabojumsChange in design when adding/modifying rates in Payments.
-
- LabojumsBug fixes in cloud installation.
-
- LabojumsFixing errors in RFID cards.
-
- JaunumsCatalan language added.
- LabojumsBug fixes in the cloud power control.
- 3.2.12LabojumsFixing errors in power control profiles and in the meter list.
-
- AtjauninātsImprovement in RFID cards to manually support 14 characters.
- 3.2.10LabojumsError fixing
-
- JaunumsFiltering by status (online/offline) available for e-Chargers.
- UzlabojumsVisualization of the e-Chargers version on the homepage.
- 3.2.8UzlabojumsGrouping of types in Payments invoices.
-
- LabojumsFix when filtering date range in Payments and dashboard.
-
- UzlabojumsIncrease in the maximum number of power control profiles.
-
- JaunumsItalian language in Pole Pro.
- AtjauninātsOptional OCPP customization properties in Pole Pro.
-
- UzlabojumsCreation of more intuitive power profiles.
-
- UzlabojumsImproved visual aspect when creating power profiles for cloud power control.
- AtjauninātsGreater reduction in the cloud power control zoom and the option to reset zoom changed to center the installation.
-
- UzlabojumsAbility to download statistics as a .xlsx file.
- LabojumsFixed various minor bugs.
-
- UzlabojumsAdded a waiting indicator when saving an installation in cloud power control.
- AtjauninātsModified text and color according to the state of the e-Charger in cloud power control.
- LabojumsImages of e-Chargers in installation view in cloud power control.
-
- JaunumsRight-click menu in cloud power control.
- JaunumsSelect, copy, paste, duplicate, and delete multiple elements in cloud power control.
- UzlabojumsMove and zoom in on an installation with the mouse wheel in cloud power control.
- AtjauninātsThe upper power limit in the charging profiles has been modified.
- LabojumsFixed various minor bugs.
-
- JaunumsAdded Basque language
- UzlabojumsPerformance improvement on the e-Chargers page and control panel
- AtjauninātsNew way to display the details of the e-Chargers
- LabojumsFixed various minor bugs.
-
- JaunumsRight-click to delete an active item during the creation or editing of an installation in cloud power control.
- JaunumsThe customer's email appears when downloading the transaction table from V2C Payments.
- UzlabojumsImproved interaction between elements during the creation or editing of an installation in cloud power control to avoid impossibilities.
- AtjauninātsV2C Payments transaction table sorted by date in descending order.
- LabojumsFixed various minor bugs.
-
- AtjauninātsNew validations when creating rates in V2C Payments.
- LabojumsFixed errors in displaying the power control settings.
- 3.1.0JaunumsNew design of the portal v2c.cloud
-
- UzlabojumsGreater speed also on the main screen, and in the charging of the user's e-Chargers.
- UzlabojumsChange the configuration to parallel for faster data loading.
- AtjauninātsAll the inverters and meters available in the App have been added.
- LabojumsFixing various bugs, updating and improving translations and user experience.
-
- JaunumsAdded list of wifi networks
- JaunumsAdded hamburger menu for better visualization of the canvas in smart charging.
- JaunumsAdded shared user management
- JaunumsAdded translations
- JaunumsAdded user help for CSV download
- JaunumsRomanian language added
- JaunumsAdded the partner creation form
- UzlabojumsCharging acceleration of the e-Chargers
- AtjauninātsChange the navbar to black
- LabojumsFixed issue with the smart charging zoom.
- 2.0.0JaunumsAdded Smart charging
-
- JaunumsAdded invitations to customers
- AtjauninātsImage tags also translated
-
- JaunumsAdded to the main screen charger in payment mode or not with icon
- JaunumsNew translations added
- AtjauninātsNew design of the main screen
- LabojumsFixed bug with colors changing upon logout
- LabojumsInvoice issue, the correct one was not downloading.
- LabojumsTransactions are now resolved quickly, and there is a change in the format of the rates.
- LabojumsResolved issue in payments with the tabs that were moving.
- LabojumsFixed 'Update software' and bug with charger statuses.
-
- JaunumsAdded Payments option
- JaunumsInvoices added in the new tab and can be downloaded.
- JaunumsAdded flat rate or customized rate when adding a rate
- UzlabojumsImprovement in device charging
- UzlabojumsImprovement of designs to make them responsive on all devices
-
- JaunumsAdded plus charger
- AtjauninātsAdd charger in the same way as in the app
- AtjauninātsWe show fewer decimals in the tables.
- AtjauninātsChange the design of the side menu and some labels.
- AtjauninātsRemoved donuts and changed design on the screen up button.
- LabojumsBug fixes and design improvements
- LabojumsFix letter design and login and main screen
-
- JaunumsAdded software update in the configuration
- JaunumsCost calculation according to the rate
- LabojumsChanging the rate is done correctly.
- LabojumsControlled error changing WiFi without connection
- LabojumsEnergy rate calculation is done correctly.
-
- JaunumsYou can now log in by pressing enter.
- UzlabojumsCharging screen improves without connection
- AtjauninātsChange of design if there is no connection
- LabojumsDynamic power control is adjusted properly.
- LabojumsGlobal statistics are now updating correctly.
- LabojumsFixed main screen hours
- LabojumsCSV data download in the correct format
-
- JaunumsNew, more specific errors indicated for the user and installers.
- LabojumsBug fixes when linking devices.
-
- UzlabojumsImprovements in website performance.
- LabojumsFunctionality bugs fixed.
-
- JaunumsStyle improvements.
- JaunumsCreation of the V2C website.
- LabojumsBug fixes.