Mises à jour
Ce qui change dans chaque version du firmware de nos bornes de recharge et de la plateforme V2C Cloud.
Nouveautés: Denka 1.1.0 · 12 nov 2026
Trydan et Trydan Pro
Version actuelle 2.5.2 · 47 versions depuis février 2022
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- NouveauDirect query of OCPP status
- NouveauNew Solplanet/AISWEI Inverter
- NouveauNew Hoymiles Inverter
- NouveauBattery discharge control: GoodWe, SolarEdge
- NouveauHuawei inverters direct connection without Dongle
- NouveauUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- NouveauNew "Unlimited" Wake-up 5 mode available from the LCD
- NouveauImprovements in Bluetooth cybersecurity
- AméliorationFixes in FV mode + Minimum power
- AméliorationOCPP: duplicate BootNotifications are avoided
- AméliorationSecurity menu lock during vehicle charging
- AméliorationImprovements for Linky-LORA
Versions précédentes 46
-
- NouveauCompatibility with SigEnergy inverters
- NouveauNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- NouveauWiFi connection for Deye inverters via Elfin
- NouveauExpansion to 105 RFID cards
- NouveauPAP/CHAP authentication for 4G connection
- NouveauMore stable OCPP connections
- AméliorationReading the P1 and Victron meters is more reliable in the event of communication failures.
- AméliorationStability of mixed three-phase charging
- AméliorationError reporting and diagnostic system
- AméliorationImprovement of home battery charging priority in PV charging modes
-
- NouveauManagement of home battery discharge in charging profiles
- NouveauUnlocking the Trydan by smartphone proximity
- NouveauNew models of SofarSolar and Azzurro inverters
- NouveauAdded current and voltage per phase in Home Assistant and Modbus API.
- NouveauWiFi connection in Deye inverters
- NouveauIncrease of up to 80 RFID cards
- NouveauBattery compatibility in SolarEdge inverters
- NouveauScroll text for long texts
- AméliorationOptimization of Ethernet network interface
- AméliorationImprovements in the Modbus TCP client
- AméliorationImprovements in mixed three-phase charging
- AméliorationImprovement of texts in German
- AméliorationIncrease the voltage range of the installation from the control panel.
-
- CorrectionOCPP password bug
- CorrectionProblems connecting to CSMS after restarts
-
- NouveauTarget charge kWh
- NouveauNew SMA Sunny Boy model
- NouveauNew Fronius model with battery
- NouveauSelect Modbus API address ID
- NouveauNew Deye models
- NouveauSofar Solar inverters
- NouveauAzzurro inverters
- NouveauSelect MID address
- NouveauEMMA Huawei
- NouveauSecurity Profile 2 OCPP (wss + auth + CA cert)
- NouveauPrivate 4G SIMs in OCPP
- NouveauOcppFreeMode
- NouveauOCPP internal queue messages
- AméliorationTime synchronization
- AméliorationPower plate measurements 1.0
- AméliorationWiFi improvements
- CorrectionExclusive mode bug with batteries
- CorrectionCoordinate "ContractedPower" and load profiles with HTTP API.
- CorrectionImprove RFID errors
- CorrectionMixed load bug
- CorrectionBug photovoltaic mode + minimum
- CorrectionBug statistics without FV via BLE
-
- NouveauMIFARE Ultralight RFID cards
- AméliorationMore robust OTA update
- CorrectionBug management autolock with payments mode
- CorrectionBug in payments mode with RFID
-
- AméliorationInstallation problem readings
- AméliorationImprovement in BYD mode
- CorrectionBug with Wibeee inverter
-
- NouveauObtain firmware version via Modbus
- NouveauGoodWe via Modbus TCP
- NouveauOCPP: FirmwareManagement
- NouveauAutolock
- NouveauNew MID models
- NouveauNew wake-up modes
- NouveauAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- NouveauLinky meter for French meters
- NouveauModbus termination resistance
- NouveauReading individual properties HTTP API
- NouveauTurn off/Turn on logo and LCD from HTTP API
- Mis à jourImprovements in dynamic control
- Mis à jourImprovement in Sungrow inverter measurements
- Mis à jourImprovements in the OTA update
- Mis à jourImprovements in the button panel menu
- Mis à jourNew Deye models
- Mis à jourOCPP: improvement in MeterValues
- Mis à jourOCPP: send StatusNotification "Faulted" with errors and warnings
- Mis à jourOCPP: publish current version
- Mis à jourOCPP: BootNotification timeout
- Mis à jourNew NTP servers
- Mis à jourImproved WI-FI scanning
- Mis à jourImprovement in P1 meter
- Mis à jourImprovement in remote logs
- Mis à jourIoT call limitation per charger
- Mis à jourImprove RAM memory
- Mis à jourStability via Ethernet
- Mis à jourCorrected translations
- CorrectionError "Waiting for Power"
- CorrectionBug with RFID cards with long names
- CorrectionBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- CorrectionImprove statistics via Bluetooth
- CorrectionLocal balancing improvements for up to 10 devices
- CorrectionBug when sending RFID code in the statistics
- CorrectionBug with Exclusive PV mode and batteries
-
- NouveauStatic power control is added (only with Trydan consumption).
- NouveauMixed charging adapts to European rates.
- NouveauPower control programming with phase limits is allowed.
- NouveauThe power control adapts to European countries with phase current limits.
- Mis à jourThe power control algorithm has been modified step by step to apply PID modulation.
- Mis à jourThe static power control between sockets or between e-Chargers is improved.
- CorrectionThe failure of remote records is avoided when a disconnection occurs.
-
- CorrectionBug DTSU666-G meters
-
- AméliorationImprovement in Wake Mode
- CorrectionFixed bug when changing the port in MQTT.
-
- NouveauEcoCharging to schedule charging automatically during the cheapest daylight hours.
- NouveauTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- NouveauCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- NouveauFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- NouveauImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- NouveauImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- NouveauOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- NouveauOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- NouveauOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- AméliorationReading the power value of the batteries in Goodwe EH and ET inverters.
- AméliorationSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- AméliorationImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- AméliorationImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- AméliorationImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- AméliorationOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- AméliorationOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- AméliorationOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- CorrectionOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- NouveauVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- NouveauSAJ hybrid inverters
- NouveauShelly Pro meters
- NouveauInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- NouveauDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- NouveauTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- AméliorationLeak detection
- AméliorationMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- AméliorationModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- AméliorationVisualization of the RFID card authentication process in OCPP
- AméliorationThe memory used in JSON and OCPP goes to the SPI RAM.
- CorrectionInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- CorrectionCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- NouveauAdaptation of OCPP to new central systems
- NouveauNew Deye models
- AméliorationImprovements in the direction detection of the V2C 2.0 control box
- CorrectionLEDs blink when there is no connection.
- CorrectionBug in Greenheiss hybrid
-
- NouveauDeye / Turbo Energy three-phase
- NouveauShelly Pro EM and Shelly Pro 3EM (Beta)
- AméliorationShow text on bidirectional meters
- AméliorationReadings with Fronius and DTSU666
- AméliorationReaction times in the leak detector
- AméliorationShow Waiting for Charge in Stop mode
- CorrectionBug with French language
- CorrectionRaise the HTTP server via Ethernet
- CorrectionBug in payments
- CorrectionRead-only in the OCPP properties
- CorrectionSave power segments via Bluetooth on some devices.
- CorrectionShelly Portugal measurements
-
- NouveauLive Remote Logs
- AméliorationShow stop due to dynamic control
- AméliorationRestarts due to reconnection attempts
- AméliorationQA Protocol
- AméliorationVoltage and Temperature Reading Power PCB
- CorrectionNaN measurement on some meters
- CorrectionError in Home Wizard readings
-
- AméliorationPerformance improvement and future compatibility between Trydan and Trydan Pro.
- AméliorationImprovements in OCPP protocol
- AméliorationImprovements in the QA process
- AméliorationImprovement in memory usage
- AméliorationMore robust statistics
-
- NouveauNetworks with WPA3 security
- NouveauNew BLE (NimBLE)
- Nouveaue-keys via BLE connection
- NouveauNew language: Romanian
- NouveauEnphase version 7.x.x, Solis with batteries
- NouveauAdaptation of the i2c power board
- AméliorationAzure library update
- AméliorationUpdate of ESP-IDF and Arduino-ESP32 libraries
- AméliorationInvestor communication via WiFi connection without Internet
- AméliorationImprovement in V2C 2.0 meter refresh rate
- AméliorationImprovement in OCPP, adaptation to support disconnections
- AméliorationImprovement in key fob detection
- AméliorationImproved refresh rate
- AméliorationImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- CorrectionModification of Deye/Turbo Energy batteries
- CorrectionCustomizable MQTT topics and username/password
- CorrectionDisconnection statistics report
- CorrectionBLE compatibility of iPhone
- CorrectionOperation of V2C 2.0 meter at night
- CorrectionAutomatic date and time
- CorrectionInteraction with Megane
-
- NouveauBug in photovoltaic three-phase mode
- AméliorationWiFi recovery routine
-
- NouveauMixed three-phase charging available through the physical menu.
- NouveauAdded three-phase MID Meter
- NouveauInclusion of server ID 2 in SolarEdge inverters
- NouveauAdded Modbus registers with the meter measurement.
- NouveauHTTP commands added for integration with HA.
- NouveauEnphase Envoy Inverter (beta) (versions 5.x.x)
- NouveauV2C 2.0 error detection of clamp not connected
- NouveauMQTT Slave with user/password authentication and customizable topics (beta)
- AméliorationImprovement of the WatchDog to prevent system freezing
- AméliorationImprovement of nearby WiFi scanning
- AméliorationBluetoothLE service reconnection protocol
- AméliorationWiFi optimization IRAM and affinity with the Azure task
- AméliorationReconnection protocol in the absence of WiFi
- AméliorationFactory reset
- AméliorationThe error code and LED interface
- AméliorationImproved the Isolated Installation mode and zero feed-in.
- AméliorationReduction in cut-off time through dynamic control to 1 min
- AméliorationAutomatic detection of time and time zone
- AméliorationThe optimization and refactoring of the measurement slaves
- AméliorationUnlocking with BLE Tag
- CorrectionOccasional LCD freezes
- CorrectionFalse positives from the leak detector
- CorrectionProblems with the MID Meter
- CorrectionLED error during update
- CorrectionDefault value for JSON type variables
- CorrectionMeasurement at 0 in Deye/TurboEnergy Inverter
- CorrectionVisual errors and local balancing address assignment
-
- NouveauSolar Discount on Shortcuts
- NouveauDeye/TurboEnergy Inverter Beta
- NouveauPhoenix Contact meter
- NouveauCarlo Gavazzi meter
- AméliorationOCPP improvements and tested in MONTA
- AméliorationProblems in dynamic control
- AméliorationReconnections and WiFi Stability
- CorrectionFrozen LCD
-
- NouveauIsolated Mode in Photovoltaic Modes
- NouveauDutch, Danish, and Valencian
- NouveauLeak sensor modes (installer menu)
- NouveauMID meter (installer menu)
- NouveauNew Ingeteam protocol (Battery Management)
- NouveauThree-phase meters DTSU666
- NouveauSDM three-phase meters
- AméliorationLocal Balancing Protocol and priorities
- AméliorationDetection of ports and hosts in OCPP
- AméliorationStable version of SMA Sunny Boy
- AméliorationPortuguese version of Wibeee
- AméliorationFronius measuring home consumption
- CorrectionUnexpected locks and unlocks
- CorrectionWhite blinking in locked mode removed
- CorrectionError selecting the slaves in beta
- CorrectionError of SolarEdge three-phase inverters
-
- NouveauChanges and improvements in calibration
-
- AméliorationCalibration adapted to the new hardware
- CorrectionData analysis in Kostal Piko fixed
-
- NouveauLocal balancing between Trydans available via WiFi or wired connection.
- NouveauSDM-220/320/120 (Tested with the Eastron brand)
- NouveauDDSU-666 Meter (Common in Huawei installations)
- NouveauSelf-calibrating without the need for a car
- NouveauManual hour available
- NouveauHTTP requests to manage the logs
- NouveauNew Modbus Registers
- NouveauGreenheiss inverters
- NouveauSAJ inverters
- NouveauWired Solis inverters
- NouveauResponse time in configurable dynamic control
- AméliorationConfigurable installation voltage
- AméliorationNew manufacturing process
- AméliorationIncluded Shelly three-phase but without FV measurement.
- AméliorationCar consumption via MQTT fixed
- AméliorationImproved and more intuitive physical menu
- CompatibilitéBeta models of Goodwe: the battery measurement is canceled.
- CorrectionBug in Max and Min Intensity via Modbus fixed.
- CorrectionFalse positives in the leak detector fixed
-
- NouveauPrevention of conflicts between slaves and the cloud
- CorrectionGoodWe conflicts and Azure initialization
- CorrectionFix in Shelly with only three-phase.
-
- AméliorationPending statistics will be sent only once.
- AméliorationShelly 3EM three-phase and modification for Portugal
- CorrectionModbus Multiple Readings Hotfix
-
- NouveauNew Modbus registers
- NouveauRFID reader in alpha version
- NouveauSolaX X3 híbrido compatible
- NouveauAvailable calibration and shortcuts via WiFi
- AméliorationOCPP Improvements
- AméliorationImprovement in WiFi scanning
- AméliorationImprovement in reconnection routines
- CorrectionBluetooth timezone failure
- CorrectionError in Trydan synchronization - APP
- CorrectionStatic IP configuration in Trydan via WiFi
- CorrectionError saving Modbus parameters
-
- NouveauNew method for calibrating communication with the car
- NouveauBeta version of the GoodWe ET/EH/BT/BH
- AméliorationImprovement in the communication analysis with the car
-
- NouveauAuto lock after 60 seconds without a car (shortcut)
- NouveauModification for Three-Phase Installations in Portugal for V2C 2.0
- NouveauKostal Piko is added.
- AméliorationReformulation of the Dynamic Control Algorithm
- AméliorationImprovement in the refresh rate of Huawei inverters
- AméliorationSolarEdge stable (Meter measuring export)
- AméliorationStable version of GoodWe
- AméliorationDetection of state D and E according to protocol
- AméliorationImproved QA process
- CorrectionStored in memory after writings via Modbus TCP and RTU
- CorrectionBug in the FV measurements and peaks resolved for V2C 2.0
-
- NouveauGoodWe in beta version
- NouveauCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- AméliorationMQTT in stable version
- AméliorationVictron in stable version
- AméliorationImproved connection with Azure
-
- NouveauMQTT slave beta version
- AméliorationDetection of power direction in Wibeee
- CorrectionThe Victron and SolarEdge inverters were bringing down the system.
-
- NouveauSolarEdge inverter added (Beta)
- NouveauVictron inverter added (Beta)
- NouveauAutolock enabled in shortcut (60 s)
- NouveauAutomatic time zone detection
- NouveauAlternative meter for car consumption (RS485)
- NouveauFV Exclusive with configurable variation
- NouveauNew Languages (French, Italian, and German)
- CorrectionFixed error in minimum power mode.
-
- AméliorationImprovements in Dynamic Control with batteries
- AméliorationImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- CorrectionResolved the IP configuration issues for Trydan with WiFi and BLE.
- CorrectionResolved the issues with the IP configuration of Shelly BLE.
-
- NouveauInclusion of the Wibeee meter
- NouveauSlave 2.0 compatible with Type 1 and Type 2 installation
- NouveauChange in the established connection blinking
- NouveauDetection and measurement of bifacial load
- NouveauImprovement in the collection and transmission of charging data
- NouveauAlternative Meter Phoenix Contact (ModbusRTU)
- NouveauModbusRTU in Trydan (simultaneous slave and master)
- NouveauStatic IP configuration in Trydan
- NouveauPossibility to select the IP in Shelly
- AméliorationInclusion of maximum intensity in OCPP (as a property)
- AméliorationImprovement in the reading of Solax inverters
- AméliorationInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- AméliorationModbusRTU and Modbus TCP server in Trydan
- Mis à jourFirst stable version of Ingeteam
- Mis à jourImprovement in the speed of the leak detector
-
- CorrectionError solution in manufacturing when saving WiFi
-
- NouveauEliminate false communication errors from the slaves.
- NouveauSave the first Shelly that Trydan connects to.
- Mis à jourWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- AméliorationImprovement in telemetry recovery in OCPP
- AméliorationImprovement in scanning nearby WiFi networks
-
- NouveauInternal Azure ping every 15 seconds to detect disconnections.
- NouveauSeparate reconnections to avoid crashing the server.
- NouveauOCPP adaptation to work with Home Assistant
- AméliorationMigration of the I2C for the clock and LCD to native idf
-
- AméliorationIncrease maximum binary size in local webServer
- CorrectionRecovery of OCPP transactions to prevent telemetry failures
-
- NouveauThe configuration of different IDs for Huawei inverters is added.
- AméliorationCorrection of the power reading of the house
- CorrectionCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- NouveauPayment Method (V2C Payments)
- NouveauOCPP Protocol
- AméliorationImprovement of WiFi and Bluetooth stability and reconnection
- CorrectionReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- CorrectionCorrection of the maximum file size for updates on Local Server
-
- NouveauList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- AméliorationReconnection with V2C Cloud after communication loss
- CorrectionCorrected Shelly and Solax routines
-
- NouveauShortcuts on the buttons: Lock and Charging Schedule
- NouveauLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- NouveauAP mode when the configured WiFi is not available
- AméliorationImprovement in LED error codes
- AméliorationAdaptation for compatibility with Huawei inverters
-
- NouveauWe added connectivity with Fronius inverters.
- AméliorationImprovements in screen writing and removal of strange characters
- AméliorationImprovement in the transmission of statistics via both WiFi and BLE.
-
- NouveauError correction x and y
Alva
Version actuelle 1.0.4 · 5 versions depuis août 2026
Améliorations de la session de charge et de la sécurité BLE
- AméliorationGestion de session de charge
- AméliorationSécurité BLE améliorée
- CorrectionBug lors de l'affichage du temps et de l'énergie dans l'App et l'Installer Panel
Versions précédentes 4
-
- CorrectionBug avec l'onduleur Ingeteam
- CorrectionBug avec le compteur Homewizard P1
- CorrectionBug avec compteur Eastron
- CorrectionBug avec l'onduleur GoodWe
-
- NouveauConnexion à Home Assistant
- NouveauLogique de réinitialisation quotidienne
- AméliorationDéverrouillage avec porte-clés et RFID
- AméliorationGestion des exceptions, watchdog et nettoyage des erreurs
-
- NouveauIdentification du connecteur par LED
- AméliorationLogique de redémarrage
- CorrectionBug dans payment lié au temps
-
- NouveauLogique de QA et fabrication
- AméliorationGestion des sessions sur les deux connecteurs
- CorrectionBugs mineurs
Pole Pro
Version actuelle 6.1.3 · 47 versions depuis mai 2023
Vous avez l'ancien Pole ? Consultez ses mises à jour.
- CorrectionThe charger no longer hangs when rebooting while shutting down the 4G module or dynamic power control
Versions précédentes 46
- 6.1.2CorrectionOCPP security event notifications are no longer sent when the connection uses no security profile (profile 0), since some central systems do not support them
-
- CorrectionCorrected default APN for Wireless Logic SIM cards in Belgium
-
- NouveauAudible buzzer feedback
- NouveauSupport for registering multiple RFID cards
- NouveauReading of the installation meter over Modbus RS485 on DC chargers
- NouveauDynamic power control for DC installations — master and slave units now share and honor the installation power limit
- NouveauLive display of actual consumption versus offered current on the charger screen
- NouveauOn-screen guidance walks the user through registering an RFID card
- NouveauOCPP connection password can now be set from the Cloud and Bluetooth
- NouveauOCPP now supports security profiles, encrypted TLS connections and Basic Authentication for the central system
- AméliorationLanguage codes standardized to the ISO 639-1 format
- AméliorationReduced volume of messages sent to the Cloud
- AméliorationTime synchronization with the CSMS no longer floods the system log
- AméliorationLog rotation no longer loses history when the disk is full
- AméliorationSafer firmware updates
- AméliorationMore reliable connectivity with automatic failover between Ethernet and 4G
- AméliorationCharges history now loads page by page instead of the whole history at once, for a faster tab
- CorrectionMeasurer error message now reads clearly
- CorrectionMore accurate meter-reading validation
- CorrectionCharge metrics are preserved if a charge is interrupted unexpectedly
- CorrectionScreen orientation set in configuration is now applied correctly
- CorrectionFree-charge mode could not be disabled from the installer panel
- CorrectionDynamic power limit was not applied at tariff/hour boundaries, briefly leaving an installation without a limit
- CorrectionResolved random service restarts (crashes) caused by network device discovery
-
- AméliorationMore reliable RFID card reading with optimized antenna configuration from first use
- AméliorationImproved stability and responsiveness of the charger's web interface
-
- NouveauOCPP - Immediate "Preparing" status when receiving a remote start command via OCPP
- NouveauWiFi disabled by default on devices without WiFi configured
- AméliorationMore reliable RFID card reading with periodic reader reinitialization
- AméliorationBetter cable connection detection and RFID timeout handling
- AméliorationCDP - More stable network device discovery, preventing unnecessary register/unregister cycles
- AméliorationImproved stability when applying configuration changes to the charger
- AméliorationAutomatic migration of legacy pending OCPP messages after update
- AméliorationImproved network handling when switching between manual and automatic IP configuration
- CorrectionPower factor value conversion for Carlo Gavazzi meters
- CorrectionImprovements in power measurement accuracy in single-phase or two-phase installations
- CorrectionOCPP - Smart Charging profiles with defined duration now applied correctly
- CorrectionOCPP - Local authentication cache overflow that could prevent charging sessions from startIing
- CorrectionOCPP - OCPP transactions stuck due to unreleased semaphores or null keys
-
- NouveauEnhanced web server for accessing and editing charger properties
- NouveauVisual improvements to the web server interface
- NouveauPersistent price display on screen when the payment system is active
- NouveauRefined error reporting to the cloud
- NouveauPower loss detection
- NouveauWi-Fi disable option from the installer panel
- NouveauNew buzzer system implementation for white boards
- AméliorationEnhanced RFID calibration with on-screen indicator during the process
- AméliorationRFID reader no longer forcibly activates when OCPP or Payments are active; explicit configuration is respected
- AméliorationRefined cable connect/disconnect notification on each event when payments are active
- AméliorationOptimized RFID card readings
- AméliorationOCPP - Improvements to the offline transaction queue
- AméliorationInternal connection optimization and overall performance improvements
- CorrectionOCPP - Improved measurement value reporting
- CorrectionRefined out-of-range measurement error detection
-
- NouveauSoftware-level leak detection enable/disable
- AméliorationAdjusted cooldown time between charges when a leak is detected
- AméliorationOCPP - Improvements to the offline transaction queue
-
- AméliorationWhen OCPP is active, we now show on screen when card passed is not registered in central system.
- CorrectionAfter update OCPP image and QR is now recovered.
-
- CorrectionFixed issue where it didn't allow a remote start if a car is connected but not in an active transaction.
- CorrectionFixed issue in setup interface.
- CorrectionFixed monophasic Carlo Gavazzi measurer.
- CorrectionFixed OCPP issue where it wouldn't charge in connector 2 if connector 1 is charging.
-
- AméliorationImproved network features mainly 4G connection.
-
- AméliorationImproved OCPP charge handling.
- AméliorationEnhanced reliability in the smart charging logic.
- AméliorationImproved features when stopping a charge with invalid identifiers.
- AméliorationImproved QR configuration for OCPP.
- AméliorationImproved error handling when sensors or communication components fail.
- AméliorationBetter log management to prevent the device’s storage from filling up.
- AméliorationImproved USB connection features.
- AméliorationImproved RFID calibration and detection display.
- AméliorationImproved features related to Bluetooth.
- AméliorationImproved dynamic power control allowing charge at minimum intensity if master is not detected.
-
- NouveauManual timezone setting is now available – The user will be able to configure the timezone even if automatic detection is disabled
- NouveauCreated a contingency page in case app is not running
- NouveauAdded Italian option for screen
- NouveauAdded default payment QR to pay without app
- NouveauAdded new OCPP personalization options - The user can now set 2 QR codes on the screen
- AméliorationImproved updater
- AméliorationImproved network connections
- AméliorationImproved OCPP meter values
- AméliorationImproved discovering devices when dynamic control is active
- AméliorationImproved user interface when updates are in progress
- AméliorationLocal load balancing is now implemented as dynamic control based specific conditions
- AméliorationImproved Bluetooth connection
- AméliorationImproved 4g connections robustness
- AméliorationImproved STM32 lock timings
- AméliorationImproved OCPP now allows external intensity limits
- AméliorationImproved data consumption
- CorrectionWhen locking a connector while charging, it now sends end charge telemetry correctly
- CorrectionFixed dynamic control issues
- CorrectionFixed Carlo Gavazzi power meter
- CorrectionFixed OCPP LMS, diagnostics, and charging profile clearing
-
- NouveauAdded shared library
- NouveauTimezone can be set manually
- NouveauTime is now synced with Central System if OCPP is active
- AméliorationImproved version/update manager
- AméliorationImproved megabyte conversion of Network Monitor
- AméliorationObtaining timezone now doesn't need to have correct time by using only http urls
- AméliorationMobile usb device name is now obtained dynamically since more usb ports might be used due to TPV
- CorrectionFixed power control issues
- CorrectionFixed that when locking connector during a charge it now ends correctly
- CorrectionRecalculate reboot time when changing time with ble
- CorrectionWe now show on screen when non registered RFID is passed while OCPP is active
- CorrectionFixed OCPP freemode rfid issues
- CorrectionDuplicate StatusNotifications are removed from offline queue
- CorrectionFixed "infinite" OCPP offline queue issue
-
- NouveauAPN can now be set manually
- AméliorationWe now show on screen different wifi images depending on how strong signal is to let know the user how good the connection is
- AméliorationGeneral OCPP improvements: we check connection to CS instead of internet for local functioning, we notify a real value now when there's a stop transaction due to power loss, fixed edge cases where connectivity is lost, new ocpp key MaxEVCurrentOffered implemented which limits charge with key instead of smart charging handler, safety mechanisms for ocpp to be more robust
- AméliorationIn 4g, increased rssi range for "excellent" so that it indicates correctly when the reception is good
- AméliorationImproved data consumption
- AméliorationImproved robustness of update
- Mis à jourAccess point time increased to 15 minutes
- CorrectionHandled issues when SSID has whitespace
-
- CorrectionAccess point improvements.
- CorrectionFixed QA issues.
-
- NouveauNew direct method to obtain additional information for Smart Charging.
- NouveauFixed random reboot time.
- AméliorationFixed unset RFID.
- AméliorationFixed Unknown measurer and made distinction between Unknown measurer and wrongly configured measurer.
- AméliorationOCPP Free mode can be toggled through OCPP keys.
- Mis à jourFixed BLE connection with iphone and fixed bluetooth communication error that appeared on app.
- Mis à jourNetwork improvements. No interface resets performed at boot which improves bootup time. Network changes now don't require reboot. When changing WIFI settings or ip ethernet settings, it connects after setting it instead of rebooting.
- CorrectionFixed issue where things on screen were missing in one connector chargers.
- CorrectionFixed time/timezone issue caused when the date is off by a few days.
- CorrectionNew property added to toggle if vehicle should be able to charge even though measurers aren't working ( Only works when OCPP, payments or dynamic control isn't enabled ).
-
- NouveauReflect on screen when charge is paused.
- NouveauMade reboot time random.
- CorrectionIncreased SAS token time to live of azure.
-
- NouveauChanges made to reduce network usage that can be toggled on or off.
- NouveauFixed case where config is corrupted or missing and would give trouble at startup.
- NouveauWe now send dead letter if cpu gets too hot and cpu temperature is now logged.
- AméliorationFixed OCPP inverted measurer error.
- AméliorationAdded mechanism to disable or enable Wifi and bluetooth.
- AméliorationWe now report information regarding which type of connection to the internet the e-charger has.
- Mis à jourChanged led colors. Switched State A (now white) and State B (now green) colors.
- CorrectionFixed set threshold values and neopixel leds of Stm32. We can now also obtain control pilot value from Stm32.
- CorrectionOCPP ConnectionTimeOut value can now be changed on the fly.
- CorrectionWe now report iccid of sim card is connected. If sim is connected but we can't obtain iccid, we send dead letter.
- CorrectionFixed log download of http interface.
-
- NouveauLTE signal is now reflected correctly instead of always showing great signal.
- AméliorationFixed wathdog reboot after doing hard reset.
-
- NouveauAdded dynamic photovoltaic.
- NouveauAdded dead letters: measurer fails and kernel error.
- NouveauProperty "wifi_info" is now reported.
- NouveauProperty "wifi_static" can be set through ble.
- NouveauWe can now obtain statistics through direct method.
- NouveauAdded individual log level for each type of logger.
- NouveauAdded neopixel led type for stm32.
- NouveauWe can now set threshold values with stm32 and get control pilot value if debug log of "Stm32" is activated.
- AméliorationImprovements in dynamic control, fabrication, QA, Azure, OCPP, config handling, 4g, access point and stm32.
- AméliorationWe now obtain timezone through url.
- AméliorationRemoved raspbian logo and desktop during boot and added V2C logo.
- AméliorationChanged default language after fabrication from english to spanish.
- Mis à jourGeneral bug fixes.
- CorrectionWhen downgrading we ensure that version we downgrade to is compatible.
-
- NouveauFixed property "ocpp" change bug.
- AméliorationProperties "powerweekday", "powerweekend" and "phase_map" can be changed through bluetooth.
- AméliorationChanged configuration handling to differentiate internally and externally set variables so that externally set or obtained variables are handled accordingly following the property schemas.
- CorrectionWe now report wifi_static with static ip configuration.
- CorrectionStatistics are now saved locally.
-
- AméliorationMeasurer fails are now registered with modbusrtumeasurer.
- AméliorationScreen font bigger for small title.
- CorrectionValidate configuration with schemas during loading.
-
- NouveauOCPP authorize can now function by connector.
- NouveauOCPP WSS connection.
- NouveauFixed OCPP parent id tag bug.
- NouveauOCPP meter values now work for 3 phases.
- AméliorationFixed error 3 not appearing on screen.
- AméliorationFixed energy by hour bug.
- AméliorationChanged measurer reading approach for faster reads.
- AméliorationWith dynamic balancing we now show used and available power in frontend.
-
- AméliorationWe show dynamic balancing information on screen.
- AméliorationSimplified handling of configuration.
- AméliorationImproved dynamic balancing.
-
- AméliorationCharger won't reboot if car is in state B and OCPP or Payments is active.
- AméliorationWhen car changes from state C to B, charge information will persist on screen.
- AméliorationCurrent state charge now reports errors.
- AméliorationAdded configuration property validation.
- CorrectionDirect method to obtain dynamic balancing information.
- CorrectionGeneral dynamic balancing improvements.
- CorrectionOCPP improvements.
-
- CorrectionChanged remaining set_basic_unreported_config to set_basic_config.
-
- NouveauFix dynamic control bug, powerbytram is not being updated.
- NouveauFixed bug where whitelist of reported items wasn't being applied and properties weren't being stored in database.
- AméliorationRemoved non-repetitive logger.
- AméliorationChanged access point interface to change apn, with manual mode or mobile operator mode.
- Mis à jourRefactored config charge box. Removed BASIC_UNREPORTED and created whitelist of properties to report.
- Mis à jourPhase map is now not applied to installation meters.
- CorrectionFixed payment bug where a charge couldn't be started properly if charge was started with the hose unlocked.
- CorrectionFix bug with power being zero, dynamic control failing when there are no connectors.
- 3.1.8Mis à jourForce WIFI and bluetooth GPIO pins for compute module 4 to work.
- 3.1.7Mis à jourForce 4g GPIO pins for compute module 4 to work.
-
- AméliorationWhen we detect that measurers aren't working, we send an unblock command in case there's a charge and the charger has lost power.
- AméliorationCreate section BASIC_UNREPORTED for properties that are used but we don't want to report.
- AméliorationLocked value has persistance when measurers fail.
- CorrectionWhen we don't receive petitions from chromium we now press enter and Ctrl+F5 if there's anything we need to accept.
-
- CorrectionChanging WIFI configuration with bluetooth now reboots the charge point.
-
- AméliorationFixed configuration file so that software works with compute module 3 and 4.
- AméliorationChanged reboot logic. It will now reboot if there's a car connected but charge is not allowed.
- CorrectionChanged payments qr code.
- CorrectionWe can change log level with property.
-
- CorrectionMeter values fixed. We now send wh instead of kwh.
-
- NouveauPause is now reset when it goes back to state A.
- NouveauShow measurer error as "Error 3" on connector. Behaviour is that connector is locked until it's fixed.
- NouveauSet wire connected again.
- AméliorationFixed general network errors. Improved access point and wifi connectivity.
- CorrectionFixed error where timezone wasn't set correctly so time appeared incorrectly.
- CorrectionFixed payment_max_mode timeout bug.
-
- NouveauFixed power, it was shown in W and is now in Kw.
- AméliorationChange timezone automatically.
- CorrectionAdded triphasic phoenix contact measurer.
- SuppriméFixed removal of grey notification update.
-
- NouveauWhenever there's an action that provokes rebooting, it will show on screen that it's going to reboot and the cause.
- NouveauScreen orientation can now be set and depending on parameter.
- NouveauAdded error message 1 and 2.
- NouveauBluetooth patch so that bluetooth initialization takes less time.
- NouveauCreated patch system. System level changes will be applied with this system.
- AméliorationMeasurer refactoring.
- AméliorationImei obtention improved.
- AméliorationInitial version of bluetooth finished: Obtain properties change basic properties, program charge, reboot, add rfid and change wifi.
- AméliorationBoot improvements. "Page not found" isn't shown anymore. Boot is faster. There's a gif indicating that system is starting.
- AméliorationObsolete properties are now deleted automatically so that they aren't reported.
- Mis à jourRFID can now function with payments. If RFID is enabled with payments, registered cards will be able to start charges. If RFID is disabled with payments, no card will be able to start a charge.
- CorrectionLimited number of messages we can send to iothub.
- CorrectionIn OCPP, fixed sending of meter values. Now sending in wh and not in kwh.
- CorrectionBoot patch so that GPIO pin initialization takes less time.
- CorrectionMonophasic measurer Eastron SDM220 implemented.
- CorrectionImproved robustness on all direct methods.
- CorrectionFixed bug where it didn't reconnect properly to iothub when it disconnected.
- CorrectionCreated direct method to put a QR code on the OCPP screen.
- SuppriméRemoved wire_connected event telemetry.
- 3.0.9CorrectionFixed ocpp meter value Energy.Active.Import, when measurer is flipped.
-
- Mis à jourFixed error where e-Charger couldn't obtain dns when connected with WIFI.
- CorrectionFixed local load balancing when one connector was charging. Now when one connector is charging, it will charge at the set intensity.
- 3.0.7CorrectionFixed ocpp Remote Start Transaction and Remote Stop Transaction.
- 3.0.6CorrectionFixed error that ocurred in ocpp where it didn't clear properly the idtag when finishing a transaction.
-
- Mis à jourChanged access point ip from 192.168.44.1 to 192.168.4.1
- Mis à jourWe now report the charger's state instead of the requested vehicle state.
- Mis à jourChanged access point master password.
- CorrectionFixed websocket connection issue with nuitka compilation.
-
- AméliorationImproved update logs.
- 3.0.3NouveauMoved Version from center to right side and added V. before the version number.
- 3.0.2AméliorationSTM will now detect SPI bus communication errors and will automatically reset.
-
- NouveauScreen now shows when RFID card is registered.
- NouveauTop bar now shows version and if access point is accessible.
- NouveauAccess point interface now has, local load balancing, rfid card registering and log download.
- NouveauCheck that compute module and board have been created properly.
- AméliorationScreen is now monitored so that it refreshes in the case that no requests have been made after 15 seconds.
- AméliorationQA diagnostic is obtained through access point.
- AméliorationReduced access point available time to 10 minutes.
- CorrectionFixed bug where connector stopped working properly when sending intensity 0.
-
- NouveauInitial Version
Denka
Version actuelle 1.1.0 · 10 versions depuis octobre 2025
- NouveauContrôle dynamique de puissance entre plusieurs chargeurs Denka et Pole dans la même installation, avec répartition automatique selon la puissance disponible.
- NouveauUn Denka maître peut lire le compteur de l'installation via RS485 pour répartir la puissance de toute la maison.
- NouveauLa puissance maximale du contrôle dynamique est ajustée en kW depuis la plateforme V2C.
- NouveauOCPP : Compatibilité avec les profils de sécurité OCPP 0, 1, 2 et 3, et avec l'authentification Basic Auth ; le mot de passe OCPP peut être modifié depuis le cloud, Bluetooth et le web local.
- NouveauOCPP : Les erreurs internes du chargeur sont notifiées au CSMS via StatusNotification.
- NouveauHistorique des charges avec des métriques détaillées de chaque session (énergie par heure, état de charge final et limite du véhicule), paginé sur le site local.
- AméliorationCommunication avec le module de puissance plus stable, avec beaucoup moins d'erreurs pendant la charge et sans fausses alertes de panne au démarrage.
- AméliorationRedémarrages plus fiables du chargeur
- AméliorationConnexion 4G plus rapide au réseau, avec APN par défaut et support pour les SIMs Wireless Logic.
- AméliorationRéseau : Améliorations significatives dans la gestion de la connexion des réseaux. Changement automatique entre Ethernet, WiFi et 4G plus stable, et IP statique appliquée correctement.
- AméliorationGestion de l'espace disque : les journaux sont tournés et limités sans perdre l'historique et on évite de remplir la mémoire.
- AméliorationAmélioration de la validation après une défaillance de communication avec la voiture (SLAC) et le système de paiements.
- AméliorationAmélioration significative du rapport d'erreurs ou deadletters vers les différentes plateformes V2C.
- CorrectionLes charges interrompues par une coupure de courant se ferment et se facturent correctement au retour du courant.
- CorrectionOCPP : La file d'attente des messages OCPP ne se bloque plus lorsque le serveur répond avec une erreur.
- CorrectionOCPP : Si le serveur OCPP refuse le début d'une transaction, la charge s'arrête.
- CorrectionOCPP : Le mode libre peut désormais être désactivé depuis le panneau de l'installateur.
Versions précédentes 9
-
- AméliorationLes paiements par carte se clôturent lorsque le véhicule est complètement déconnecté, de sorte que le montant facturé correspond toujours à l'énergie fournie.
- AméliorationRedémarrages plus fiables sur les chargeurs avec connectivité mobile (4G).
- CorrectionLes profils de charge intelligente avec durée envoyés par OCPP sont maintenant appliqués correctement.
- CorrectionLes messages OCPP en attente d'envoi ne sont plus perdus lors de la mise à jour depuis une version antérieure.
- 1.0.5AméliorationLe chargeur démarre correctement même lorsqu'aucune connexion réseau n'est disponible.
-
- AméliorationLa connexion avec votre plateforme OCPP se rétablit automatiquement après une erreur réseau.
- AméliorationLe lecteur RFID se rétablit automatiquement après une erreur de lecture, sans besoin de redémarrer le chargeur.
- CorrectionLes changements de configuration pouvaient cesser de s'appliquer après une erreur interne. Ils s'appliquent désormais toujours.
- CorrectionLe terminal de paiement ne démarre plus lorsqu'il est désactivé.
- 1.0.3CorrectionLe chargeur pouvait cesser de répondre après un long temps de fonctionnement. Résolu.
-
- AméliorationVotre configuration et vos clés OCPP sont conservées lors de la mise à jour du chargeur.
- AméliorationMicrologiciel de contrôle de puissance mis à jour, pour une charge plus stable et précise.
- CompatibilitéDenka est intégré à la plateforme unifiée de V2C et passe à la nouvelle ligne de versions 1.x, qui remplace la série 0.14.x.
- CorrectionErreurs lors du démarrage ou de l'arrêt d'une session de charge par OCPP.
- CorrectionLe chargeur ne tente plus de se reconnecter indéfiniment au cloud avec des identifiants expirés.
- CorrectionLes cartes RFID avec des codes numériques étaient lues de manière incorrecte.
- CorrectionLes mises à jour pouvaient échouer lors du passage depuis certaines versions.
-
- AméliorationCharge intelligente : curseur de puissance dans le panneau de l'installateur.
- AméliorationAméliorations générales de la stabilité et de la fiabilité du système.
- AméliorationAméliorations générales du fonctionnement et de la stabilité.
- CorrectionCorrections dans le comportement de la charge intelligente OCPP.
- CorrectionCorrection des problèmes dans la gestion et la récupération des alarmes du système.
-
- NouveauArrêt de charge à un SoC spécifique
- NouveauRapport de l'état du bouton d'urgence.
- NouveauÉlément slider dans le serveur web.
- NouveauRapport du SoC du véhicule et protocole au backend.
- NouveauLa méthode directe `currentcharge` renvoie désormais le temps restant pour le SoC bulk et complet.
- NouveauMéthode directe pour redémarrer le service `autossh`.
- NouveauConfiguration du mode IP (public/privé) pour la connexion 4G.
- AméliorationCharge intelligente OCPP.
- AméliorationAméliorations des performances.
- AméliorationDémarrage du module WiFi.
- AméliorationMigration du serveur HTTP.
- CorrectionCorrection des erreurs dans la configuration de démarrage.
- CorrectionCorrection des erreurs dans la charge intelligente de l'OCPP.
- CorrectionCorrection de bugs dans le serveur web et la communication avec le matériel.
-
- AméliorationAmélioration des performances de l'envoi des paramètres DC.
- CorrectionCorrection du blocage de SPI.
- CorrectionBug dans `TimerHandler` avec `n_connectors`.
-
- NouveauIntégration des modifications dans les propriétés signalées.
- NouveauAjustement de la calibration RFID depuis le panneau d'installation.
- NouveauIntégration de la propriété observée de la bibliothèque partagée.
- NouveauArrêt de charge à un SoC spécifique.
- NouveauListe blanche de charge par MAC.
- CorrectionBug dans `TimerHandler` avec `n_connectors`.
- CorrectionCorrectif pour l'augmentation des messages envoyés.
Screen
Version actuelle 2.20 · 66 versions depuis mars 2022
- CorrectionFixed rfid bug in ocpp.
Versions précédentes 65
- 2.19CorrectionFixed rfid card issue in stop transactions.
- 2.18CorrectionFixed OCPP error where transaction wasn't started when states passed from C to B to C.
- 2.17CorrectionCB Master: Improved robustness of rfid charge track so that if one connector is fully charged and a different car wants to charge in the other connector it can now charge.
- 2.16CorrectionCB Master: Fixed bug that wouldn't allow two connectors to charge with payment + RFID.
- 2.15NouveauCB Master/CB N: Rfid cards can start a charge in payment mode if rfid is enabled.
- 2.14CorrectionCB Master: We check if measurer is flipped by connector instead of globally.
- 2.13CorrectionCB Master: We check if measurer is flipped while configuring meter values so that they are sent correctly.
-
- CorrectionCB N: Fixed cloud iot problem.
- CorrectionCB Master: Configuration file is restored correctly in the case it's lost. This provoked the page not found error.
- CorrectionCB Master: Fixed bug where a connector couldn't start a charge when there's a car on the other connector with state B.
- 2.11CorrectionCB Master: Meter power bug fix.
-
- NouveauCB N: Car state management D and E.
- AméliorationCB N: General payment improvements.
- AméliorationCB N: In payment method, when you move from status c to b, it does not allow you to reload again until you start a new transaction.
- AméliorationCB N: Improved restart logic when any OCPP configuration is changed.
- AméliorationCB Master: General meter improvements.
- AméliorationPole: Filter to reduce number of logs.
- CorrectionCB Master: Fixed payment bug that sent the upload permission to the wrong connector.
- CorrectionCB Master: Fixed bug that when two cars were connected and the B connector was in B status, when the card was swiped, the B was set to charge when the A should be set.
- CorrectionCB Master: Total energy bug arrangement from version using imported and exported energy.
-
- AméliorationCB Master: Meter restructuring.
- AméliorationOCPP: General improvements in Smart Charging and Tx Profile implemented.
- AméliorationOCPP: Changes due to restructuring of the meter.
- AméliorationOCPP: Restructuring of smart charging. Obtain composite timetable with several profiles.
-
- NouveauCB Master: Integrated SACI meter and changes so that the serial configuration per connector is not linked.
- AméliorationCB Master: Increased RFID SPI communication speed and lowered RFID gain if noise is detected.
- AméliorationCB Master: Code refactoring
-
- NouveauOCPP: Starting point for get composite schedule done.
- NouveauOCPP: Relative profiles are handled but only for Smart Charge profiles where connector id is bigger than 0.
- NouveauOCPP: Smart Charging Tx Profiles are now accepted.
- NouveauOCPP: In websocket connection, added "compression=None" since without it it doesn't work on latest Steve version.
- AméliorationCB Master: Refactored serial and made some changes that improve flexibility. We can now have one connector with one type of measurer and the other connector with a different type of measurer.
- AméliorationOCPP: Added next time check mechanism for Smart Charging so we check the next time any limit changes instead of every 30 seconds.
- AméliorationOCPP: General Smart Charge improvements.
- CorrectionCB Master: Convert to positive the negative values read by Phoenix Contact measurer.
- CorrectionCB Master: Adjusted the precision of Phoenix Contact monophasic measurers.
- CorrectionCB N: Fixed bug provoked by changing local load balancing from v2c service.
- CorrectionOCPP: Change availability of Persistant Data handler is now async so that we can call it without blocking the execution of the ServerController.
- CorrectionOCPP: Fixed clear charging profiles.
- CorrectionOCPP: We handle decimal numbers on the Smart Charge profile's limit.
-
- NouveauCB N: Changes due to Smart Charging
- NouveauOCPP: Smart Charging starting point fininshed.
- NouveauOCPP: Smart Charging configuration keys are handled.
- NouveauOCPP: Smart Charging profiles can be added and will be validated and can also be deleted.
- CorrectionOCPP, CB N and CB Master: Fixed bug when locked was modified and ocpp was activated but chargepoint isn't connected to any central system.
- CorrectionCB Master: Fixed bug when OCPP charge is started where if connector 1 was charging, connector 0 couldn't start a charge.
- CorrectionCB Master: Prevent crash in the case that .versions folder doesn't exist.
- CorrectionCB Master: Register cards are now added to card cache.
-
- NouveauPole: Screen now shows when user passes a non registered RFID card.
- AméliorationCB Master: Improvements in update process.
- AméliorationCB Master: Changes so that screen indicates when a non registered RFID card is passed.
- AméliorationCB N: Improvements in update process.
- AméliorationOCPP: GetConfigurationKeys now returns unknown keys and we handle SupportedFileTransferProtocols key.
- AméliorationPole: Romanian identifier moved to position 6 to maintain order language with Trydan.
-
- AméliorationCB Master: We store RFID cards in cache.
- AméliorationCB N: RFID reader improvements. Case where two connectors are plugged in and a card is passed.
- AméliorationCB N: New communication method so that CB master can obtain RFID cards.
- SuppriméCB Master: We don't send wifi_info in report anymore and we have removed functions related to wifi_info.
- SuppriméCB N: We don't send wifi_info in report anymore.
-
- NouveauCB N: Static IP configuration through access point.
- AméliorationCB Master: Improvement in connect/disconnect logic. Disconnection is less rigid and we increased network check from 5 seconds to 15 seconds.
- AméliorationCB Master: Increased RFID reader antenna gain.
- AméliorationCB N: When charger reconnects, it will only send report if a property has changed.
- AméliorationCB N: Properties are now only reported when they have changed from previous value.
- CorrectionCB Master: CWe fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- CorrectionCB N: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- CorrectionOCPP: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
-
- AméliorationCB Master: Safeguard so that it doesn't fail when there's a missing network card and we try to obtain data usage.
- AméliorationOCPP: Removed range validation from measurer.
- Mis à jourCB Master: Removed range validation from measurer for Carlo Gavazzi and Phoenix Contact measurers.
- CorrectionCB Master: Fixed energy by hour bug.
-
- AméliorationCB N: We show in log if i2c reconnects.
-
- NouveauCB Master: Chargebox Cache now stores state of connectivity with V2C service to show it on the screen.
- NouveauCB N: Chargebox Cache now stores state of connectivity with V2C service.
- NouveauPole: The screen now shows a cloud icon to indicate connectivity to our cloud.
- AméliorationCB Master: Adjustment in measurer so that it can handle int32 represented as uint.
- AméliorationCB N: Log improvements to not show get_has_internet_connection y and reduce error messages generated when i2c is not working.
- AméliorationCB N: Changes to reduce calls to has_internet_connection to consume less data.
- AméliorationOCPP: We log exception names since sometimes exception errors return empty string.
- AméliorationOCPP: We capture error if there's an error when sending heartbeat.
- AméliorationOCPP: We change client controller so that it's the same as CB N and CB Master.
- CorrectionCB N: Seconds of timeout now return 0 instead of None if not set.
-
- AméliorationCB Master: Master now sends the balanced intensity when it changes.
- AméliorationCB N: Changed order of what happens when configuration is changed. We first update the value, then we report the changes to Azure and finally we set the cache.
- AméliorationCB N: CB Master now sends balanced intensity instead of CB N probing for change.
- CorrectionCB Master: Fixed error where RFID stops charge while the other connector is enabled.
- CorrectionCB Master: Fixed error where RFID card is passed and both connectors have a car plugged in.
- CorrectionCB N: Fixed bug where changing local load balancing set both connector intensities to 16.
-
- AméliorationCB Master: Change in log system to not show repeated logs.
- AméliorationCB Master: Shared properties are now set in the other connector if they are different on startup.
- AméliorationCB Master: Completely decoupled OCPP from CB N and get_ocpp_config function fixed.
- AméliorationCB Master: Network state is now sent when changed instead of being probed every 30 seconds.
- AméliorationCB N: General improvements of communication between modules and cache.
- AméliorationCB N: Improved stability related with missing configuration.
- AméliorationCB N: Change in log system to not show repeated logs.
- AméliorationCB N: Fixed problem where Chargebox loop would destroy RFID state.
- AméliorationCB N: Fixed OCPP ConnectionTimeout.
- AméliorationCB N: Completely decoupled OCPP from CB N
- AméliorationCB N: Network state is now sent when changed instead of being probed every 30 seconds.
- AméliorationCB N: We only change repository hash if it's different than the current one.
- AméliorationCB N: Updating checks if charger is updated or not and only changes version after it has been updated.
- AméliorationCB N: General improvements of communication between modules.
- AméliorationOCPP: Improved Client Controller traceability.
-
- AméliorationCB Master: Created Cache to decrease the number of requests and communication between modules.
- AméliorationCB Master: Fixed network reset problem.
- AméliorationCB Master: Changes so that Pole can receive all the information it needs in one call.
- AméliorationCB Master: Changes dues to how the measures are now sent.
- AméliorationCB Master: General access point improvements.
- AméliorationCB Master: Improvements due to changes in module communication.
- AméliorationCB N: Created singletons are now thread safe.
- AméliorationCB N: Server Controller is now executed sooner due to being fundamental in correct functioning.
- AméliorationCB N: Changes to take into account CB Master's cache
- AméliorationCB N: Changed way we obtain measures to perform less requests with Client Controller.
- AméliorationCB N: Improvements due to changes in module communication.
- AméliorationOCPP: Created singletons are now thread safe.
- AméliorationOCPP: Completely decoupled from CB N and now only communicates with CB Master.
- AméliorationOCPP: Simplified communication between modules.
- AméliorationOCPP: Improvements due to changes in module communication.
- AméliorationPole: Created singletons are now thread safe.
- AméliorationPole: Completely decoupled CB N and we obtain all information needed in one call to CB Master.
- AméliorationPole: Improvements due to changes in module communication.
-
- AméliorationCB Master: The charger now limits the number of messages that appear in the case that there's a range validation fail of a measure.
- AméliorationCB N: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- AméliorationCB N: Restart Server Controller mechanism.
- AméliorationOCPP: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- AméliorationOCPP: Restart async Server Controller mechanism.
- AméliorationPole: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- CorrectionOCPP: If there's an error handling a request, we won't add it to the offline queue.
- CorrectionOCPP: Include thread and sys libraries.
-
- AméliorationCB N: When rebooting, we check module communication server.
- AméliorationCB N: Decoupled concept of connector id and measurer address.
- AméliorationCB Master: When rebooting, we check module communication server.
- AméliorationCB Master: Decoupled concept of connector id and measurer address.
- AméliorationCB Master: Fixed error in Phoenix Contact measurer.
- AméliorationPole: ZMQ integrated to improve communication.
-
- AméliorationPole: Improvement to let the user know when to connect the vehicle.
- AméliorationPole: Screen now reflects if charger has only one connector.
- AméliorationCB Master: Changed SSID format so that it's the same as Trydan's format.
-
- AméliorationOCPP: Added measurer range validation.
- AméliorationCB Master: Added measurer range validation.
- Mis à jourOCPP: AuthorizeRemoteTxRequests is now a read and write configuration key.
- CorrectionOCPP: Fixed problem with repeated logs.
- CorrectionCB Master: Fixed problem with repeated logs.
- CorrectionCB N: Fixed problem with repeated logs.
-
- AméliorationCB N: Handled special case of change intensity.
-
- NouveauCB Master: Access point logic fininshed.
- NouveauOCPP: Data validation when configuration is changed.
- NouveauOCPP: Charger can now handle multiple transactions offline.
- AméliorationCB N: If OCPP is on, we disable payment mode.
-
- AméliorationOCPP: Reset function improved. Corresponding Status Notification is sent.
-
- AméliorationCB N: General stability improvements.
- AméliorationCB N: Changed payment method approach.
- AméliorationCB Master: Changed payment method approach.
- AméliorationCB Master: Improved robustness in the case the access point software is not installed.
- AméliorationPole: Improvements due to payment method.
-
- NouveauOCPP: Change availability validates connector.
- NouveauCB Master: Finished Access point.
- AméliorationCB Master: Changed compressed file formats from gzip to gz
- AméliorationCB Master: Force backup when restarting.
-
- NouveauCB N: Allow to change intensity, when i2c is failing.
- NouveauCB Master: Implemented most of the access point server functionalities.
- CorrectionCB Master: Fixed OCPP measurer error that ocurred when all selected measures in Meter Values returned 0.
- 1.4.3NouveauCB Master: Initial version of the access point server.
-
- AméliorationCB N: Changes to improve Pole software.
- AméliorationPole: Changes to simplify view logic.
- CorrectionCB Master: If payment mode is active, charger won't allow to charge with RFID card.
- CorrectionPole: Removed sourceMappingUrl to prevent 404 error when there's no internet.
- 1.4.1CorrectionCB N: Payment mode changed since payload format for server has changed.
- 1.4.0NouveauPole: Changes in screen software that reflects payment mode, blocking connectors and OCPP.
-
- CorrectionOCPP: Charger won't send Authorize if passed RFID card is already used in a transaction.
- 1.3.23AméliorationOCPP: We store RFID cards in lower caps to improve robustness.
-
- AméliorationOCPP: Improved robustness of RFID cards stored in the Local Authorization list.
-
- AméliorationOCPP: Improved Local Authorization logic.
-
- CorrectionCB Master: Fixed wifilist sending format.
-
- NouveauCB N: We report information regarding wifi_info. Direct method to ask for the SSIDs the raspberry pi detects.
- 1.3.18AméliorationOCPP: Improved authorization cache handler.
-
- AméliorationOCPP: Improved handling of measurer values.
-
- AméliorationOCPP: Improved handling of configuration keys.
-
- Mis à jourCB N: Payment mode with duration and timers.
-
- AméliorationOCPP: Improved MeterValues handler.
- 1.3.13NouveauOCPP: Finished Local Authorization List profile.
- 1.3.12AméliorationOCPP: Log Improvements.
- 1.3.11CorrectionOCPP: Fixed bug that wouldn't send Authorize Request when passing the RFID card.
-
- NouveauOCPP: Basic implementation of OCPP profiles: FirmwareManagement, LocalAuthListManagement, Reservation and SmartCharging.
- 1.3.9AméliorationCB Master: Fixed RFID card reading with Wiegand reader for cards that have a 0 on the left side. Example of cards that failed: 32:0a:2c:23, 41:00:32:12.
-
- Mis à jourOCPP: Availability isn't managed by OCPP anymore. It is handled exclusively by property locked.
- 1.3.7AméliorationCB N: If charger is blocked, led blinks won't be sent.
- 1.3.6NouveauCB N: Payment Mode finished with start and stop.
- 1.3.5AméliorationOCPP: Clear Cache can only be performed when all connectors are in the OCPP state Available.
-
- AméliorationOCPP: Changes so that availability can be changed from CB N.
-
- AméliorationCB Master: OCPP module can now ask for Status Notification.
- Mis à jourOCPP: The charger the different possible OCPP states in the Status Notification.
- 1.3.2AméliorationOCPP: We can now set configuration parameters for safeguard.
- 1.3.1AméliorationOCPP: Change availability is now completely functional. It changes to inoperative during a charge and availability changes the locked value.
- 1.3.0CorrectionOCPP: Changed way we obtain measurer data for OCPP.
- 1.2.0CorrectionOCPP: Temporary fix for Place to plug since OCPP library can't handle unknown keys.
- 1.1.0CorrectionOCPP: Fixed _available_connectors error.
-
- NouveauOCPP.
- NouveauScreen.
- NouveauPole.
- NouveauCB Master.
- NouveauCB N.
Application V2C Cloud
Version actuelle 3.3.2 · 30 versions depuis février 2023
- NouveauNew dark mode built into the app: all screens adapt correctly to the dark mode of your phone.
- NouveauNew appearance screen (Settings > User data > Appearance) to choose between Automatic mode (follows the phone), Light or Dark.
- NouveauNew QR and barcode reader, faster and more reliable, to identify the e-Charger in Payments and during pairing.
- NouveauClearer error messages when signing in incorrectly.
- AméliorationCleaner app startup, without the initial white flash.
- AméliorationFixed double margins and grey bars on Android 14 and earlier when leaving and returning to the application.
- AméliorationLighter app: significant reduction in its size thanks to image and code optimization on Android.
- CompatibilitéThe app now requires Android 8.0 or later.
- Mis à jour"No injection or isolated" mode in charging profiles: the minimum power becomes 300 W, since a lower battery discharge is insufficient, with a warning if a lower value is entered.
- CorrectionFixed an issue where newly created charging profiles could disappear when refreshing the main screen.
- CorrectionFixed the scheduled charging modal (Classic and EcoCharging), which now adjusts to display all its content without needing to scroll.
Versions précédentes 29
-
- NouveauNew V2C in-house notification system, more reliable, and request for notification permission in recent versions of Android.
- NouveauNew languages available: Polish, Lithuanian, Simplified Chinese and Czech.
- NouveauNew favorite e-Chargers list in Payments: save your usual e-Chargers under any name you like to start charging in a single step.
- NouveauThe V2C e-Chargers shown on the map already allow you to start charging directly through V2C Payments.
- NouveauYou can filter the map by V2C e-Chargers.
- NouveauNew compatible inverters for dynamic control: SolPlanet, Hoymiles and Huawei with direct WiFi connection (available for Trydan version 2.5.2 or higher).
- NouveauHome battery management extended to more inverters: Sigenergy (from version 2.5.1), and GoodWe, SolarEdge and SolPlanet (from version 2.5.2).
- NouveauNew alert on Pole Pro when the cable meter does not respond (Error 3), available from version 6.1.0.
- NouveauNew explanation of how mixed charging mode works in Special options.
- NouveauThe main screen now shows the name of the charging profile in use.
- NouveauThe statistics now correctly show negative costs.
- NouveauThe virtual assistant button can be docked to the side of the screen and restored whenever it is needed.
- NouveauNew explanatory message when sharing an e-Charger with an email address that does not have a V2C account.
- NouveauVisual improvements across the entire application: system bars, top margins and adaptation to different mobile device models.
- AméliorationFaster app startup and lower resource consumption.
- AméliorationNew date picker design for the global statistics and for each e-Charger.
- AméliorationImproved Bluetooth connection stability, preventing freezes when connecting, when checking the power settings and when opening the e-Charger options.
- AméliorationGreater session stability: unexpected logouts are avoided after keeping the app in the background for a long time, and lock-ups when signing in on iPhone are prevented.
- AméliorationPole Pro network configuration, now more secure: validation of the WiFi network and static IP, the APN does not accept accents, and the presentation of the 4G SIM card has been improved.
- AméliorationCorrections to tariff names and tariff display, plus new colors to better distinguish periods when editing the electricity tariff.
- AméliorationInternal optimization to reduce the size of the application.
- Mis à jourV2C Payments: now only the e-Charger administrator can activate it, and when doing so, the location of the charging point is selected.
- Mis à jourV2C Payments: new warning before continuing if the e-Charger has no Internet connection or does not allow charging at that time.
- Mis à jourThe charging priority between the car and the battery is only shown when the installation includes an inverter or the Huawei EMMA meter.
- Mis à jourCompatibility with the new language format in the latest firmware versions of the e-Chargers.
- CorrectionFixed the statistics list on iPhone, which could appear cut off.
- CorrectionCorrected the minimum power displayed when it is below 1 kW on Denka.
- CorrectionFixed an internet connection warning that was being displayed without cause.
- CorrectionFixed an error when selecting car models whose name contains the # symbol.
- SuppriméThe app no longer requests background location permission, as it is no longer necessary.
-
- NouveauImprovements to V2C Assistant: a new information screen to better explain how the assistant works.
- NouveauImprovements in Dynamic Control: Shelly Pro devices are also compatible with V3.
- NouveauImprovements to battery configuration: the interface of the option that prevents the charger from discharging the home battery has been improved, making its operation clearer.
- NouveauNew compatibility with Sigenergy: added Sigenergy as a compatible inverter for battery control in the charging profiles.
- NouveauNew Solarman inverter discovery: added a system to automatically detect available Solarman devices during setup in Dynamic Control.
- NouveauSolarman discovery via Bluetooth and Wi-Fi: the new system lets you perform discovery using the available connections.
- NouveauImprovements to Solarman configuration: discovered devices are now displayed individually to make them easier to select and configure.
- AméliorationImprovements to scheduled charging: optimized the operation of the time indicator during scheduled charging sessions.
- AméliorationNew error handling: improved the behavior of certain app calls when status errors occur.
- AméliorationImprovements in Oasys: optimized data persistence to correctly retain configuration settings.
- AméliorationImprovements to AutoCharge management: updated the name and presentation of the AutoCharge feature.
- AméliorationImprovements to sharing: additional information added to the sharing screen to make it easier to understand.
- AméliorationVisual improvements in the Solarman discovery flow: improved states, animations, messages and confirmations during the search process.
- AméliorationGeneral improvements: the application has been optimized and various bugs have been fixed to deliver a more stable experience.
- Mis à jourImprovements to charging profiles: maximum configurable power increased to 12 kW for single-phase installations and 36 kW for three-phase installations to make configuration easier for French users.
- Mis à jourNew support area: access to the support area has been updated.
- CorrectionImprovements to charger sharing: fixed an issue that could cause errors when sharing a charger.
- CorrectionMap improvements: Added token and updated the access used for the maps to ensure their correct operation.
- CorrectionImprovements to inverter configuration: fixed several cases related to the configuration and validation of connection parameters.
- CorrectionStability improvements: several issues detected during the final review have been fixed, such as the change of Charging type in special options not being performed correctly via Bluetooth.
-
- NouveauNew password for OCPP in the advanced options for a more secure configuration.
- NouveauNew notice when location permission is not granted, to make device setup easier.
- NouveauNew reminder in the chatbot to allow movement when necessary.
- NouveauImproved authentication stability, preventing simultaneous token requests and enhancing internal token management.
- NouveauA safety timeout has been added when obtaining the token to prevent blocking in exceptional cases.
- NouveauNew Sigenergy configuration guide via Modbus TCP to simplify commissioning of the inverter.
- NouveauNew link to the Sigenergy setup guide when selecting this inverter in dynamic power control.
- NouveauCompatibility with Sigenergy in dynamic power control, correctly identifying it as an inverter.
- NouveauNew compatible models of Azzurro and SofarSolar inverters.
- NouveauNew notice to restart the Alva when necessary to complete the configuration correctly.
- NouveauMore precise Bluetooth error messages when it is not possible to connect to the charger.
- NouveauNew Ingeteam inverter models and validation of connection data to simplify their configuration.
- NouveauSelection of charging type available in Special options (Available for Trydan version 2.5.0 or higher).
- AméliorationImprovements to the Bluetooth connection of the Alva, with faster and more stable communication.
- AméliorationThe chatbot now offers more useful recommendations, with questions tailored to your setup and situation.
- AméliorationImprovements to smartphone configuration and translation of the texts related to pairing.
- AméliorationImprovements to the Dutch translations to deliver a more consistent experience.
- AméliorationGreater control over sending statistics when retrieving them via Bluetooth, preventing issues when the data is corrupted or incomplete.
- AméliorationInternal optimization of the app to reduce its size and improve compatibility with the latest Android recommendations.
- AméliorationImproved sensitivity of the charging profiles to avoid changing the segment when clicking.
- AméliorationImprovement to adjust charging profile times with precision, if desired.
- AméliorationImproved management of the dynamic control data for the Alva, correcting errors during its query.
- AméliorationGreater robustness when synchronising the time via Bluetooth on the Trydan.
- Mis à jourThe battery charging priority message in the charging profiles has been updated to make it clearer.
- CorrectionImproved precision on some sliders, fixing data submission when they are clicked directly.
- CorrectionFix for an empty card in the special options.
-
- NouveauShow prioritising household battery charging in the charging profiles (version 2.5.0 or higher).
- NouveauAdd detailed information on battery priority in charging profiles.
- NouveauAdded EMMA as a compatible inverter to prevent battery discharge.
- NouveauIdle fee added in Payments.
- NouveauAdded COM address to the EMMA meter.
- NouveauConnection type sent to ALVA.
- CorrectionFixed a bug when opening the pop-ups.
-
- NouveauAdded integrated AI chatbot.
- NouveauAdded charging session completion log under Special options for Trydans (firmware version 2.5.0 or later).
- NouveauAdded new custom tariff by time periods.
- NouveauOasys chart data displayed as on the website.
- NouveauAdded new "Battery level" field to the Oasys chart.
- NouveauAdded a search feature for when a user has many chargers (more than 10).
- NouveauPagination for retrieving large quantities of cards and eKeys via Bluetooth.
- NouveauThe maximum charging current limit message for the connectors on Alvas will be 640A because they have two sockets.
- NouveauImprovements to the RFID design, pagination, search engine and differentiation by type.
- NouveauDisplay the version number the firmware will be updated to.
- NouveauChecking whether Bluetooth permission is enabled and notifying the user.
- NouveauLimited-current message on the screen for 16-ampere models.
- NouveauChint available by version for Denka and Pole chargers.
- NouveauNew GIF added to show battery discharge and photovoltaic production.
- AméliorationNew and improved UX for charging profiles.
- AméliorationImproved UX for the Energy Tariff screen, for custom tariffs.
- AméliorationImprovements and optimization of calls made during a Payments transaction.
- AméliorationGeneral Bluetooth improvements.
- AméliorationImproved design of the User Management screen and the option for the administrator to remove the charger from there.
- AméliorationMaximum charging current limited for the connectors and improved user experience.
- CorrectionAvoid negative values in Oasys charts.
- CorrectionFixed inconsistent colours in the Oasys charts.
- CorrectionImproved UX of the password change button to prevent multiple clicks.
- CorrectionFaster app startup when accessed without network coverage.
-
- NouveauBattery discharge management notice for Ingeteam in its external application.
- NouveauThe administrator can see whether the charger is being managed by an installer. Other users can see who the administrator is.
- NouveauNew label in the capacity data.
- NouveauDetailed explanations have been added to all the battery fields.
- NouveauUpdate to version 2.5.0 to include compatibility with battery discharge.
- NouveauSafety alerts have been added to warn the user to be careful when pressing certain sensitive functions.
- NouveauGrid management has been added to the Oasys settings.
- AméliorationImprovement across all Oasys screens
- AméliorationImprovements in the app (v2c): The energy tariff has been added to Oasys.
- Mis à jourValidation of RFID and eKey length (at least 3 characters).
- Mis à jourThe Ingeteam and EMMA inverters have been removed from the list of compatible inverters for battery discharge.
- CorrectionThe fix addressed an error when displaying the message "Evitar descarga de batería".
- CorrectionFixed an error when saving the settings with the Goodwe inverter.
- CorrectionFixed an error where the main method kept running in a loop even after leaving the screen.
- CorrectionThe power limit issue on Denka has been resolved (hidden, but completed).
- CorrectionCharging current has been permanently hidden on the payment screen.
- CorrectionA possible security vulnerability has been resolved.
-
- NouveauThere is a charge in progress indicated in the statistics.
- NouveauNow the names of the RFID cards appear in the statistics.
- NouveauFinished main battery screens with real data.
- NouveauAdded checkbox to prevent battery discharge from version 2.4.7 onwards for some inverters
- AméliorationGreater robustness in the firmware update display (The update option will only appear if the current version is strictly lower than the latest stable version in production).
- Mis à jourAllow editors to modify the energy tariff.
- CorrectionFixed error in the GIF without FV.
-
- NouveauSeparation of Azurro and Sofar Solar inverters.
- NouveauPrevention of overly long codes in RFID or eKeys and improvement of the user experience.
- NouveauNew Azurro inverter.
- NouveauImproved fluency in the map menus.
- NouveauIncreased modal size to improve data display.
- NouveauNew improved statistics design.
- NouveauAdded new Huawei EMMA meter.
- NouveauInverter type renamed to Sunny SMA.
- NouveauAdded vehicle registration plate.
- NouveauAdded the type of solar PV energy used in your charging profiles at each moment in the GIF
- NouveauPagination completed for RFID on Denka and Pole Pro
- NouveauNew Fronius types limited to versions above 2.4.2
- AméliorationImproved display of electric vehicle details.
- AméliorationImprovement in the Italian translations.
- AméliorationGeneral translation improvement.
- AméliorationUsability improvements and repositioning of buttons in EcoCharging
- AméliorationImprovement in Payments data sampling
- CorrectionFixed the autocharge status check (it should not be performed in that case).
- CorrectionFixed an error in the electric vehicle data.
- CorrectionToken endpoint update across the entire app.
- CorrectionFixed an error on the options screen with MAC addresses on Poles.
- CorrectionImproved compatibility with large-screen devices.
- CorrectioniOS safe-area settings.
- CorrectionFixed an end-to-end issue on Android 15.
- CorrectionUpdating end-to-end obsolete APIs.
- CorrectionAdded safe areas to avoid overlaps with system bars.
- CorrectionCritical security vulnerability fixed in Android.
- CorrectionHidden charge target if the version doesn't include the required update (2.4.3)
- CorrectionFixed a bug when trying to update firmware over local Wi-Fi.
-
- NouveauAdded information on the cost during charging for users with photovoltaic systems.
- NouveauMapbox token change for map search.
- AméliorationBluetooth connection acceleration.
- AméliorationImproved design of the BLE pairing.
- AméliorationRefactoring
- AméliorationBluetooth connectivity optimization on iOS.
- AméliorationContextual translation improvements across all languages.
- Mis à jourChange in the location of the V2C Business Panel, now in the main settings.
- CorrectionFixed a bug when configuring V2C Business Panel.
- CorrectionFixed a bug in the charge target checkbox.
- CorrectionFixed a bug on the RFID/eKeys screen for the Alva units.
- CorrectionFixed a bug where the map menus overlapped the notch on iPhones.
- SuppriméSecondary unit update hidden
-
- NouveauFinished and fully functional widget on Android and iOS.
- NouveauAdded AI chatbot for frequently asked questions.
- NouveauExplanation and notice for the Linky meter.
- NouveauNew protocols for Goodwe inverter.
- NouveauNew links for the new "Informational videos".
- NouveauNew screen for pairing chargers via Bluetooth proximity.
- NouveauNew screen to configure the time zone.
- NouveauAdded Alva to the model lineup
- NouveauNew option to link your e-Charger with a company.
- NouveauTwo new subtypes for the Fronius inverter.
- NouveauNew tariff for France: EDF Tempo
- AméliorationBest UX design for classic scheduled charging.
- AméliorationImproved data transmission and alerts for dynamic power control.
- AméliorationRefactoring of part of the code.
- AméliorationImprovement of some incorrect labels in all languages.
- AméliorationImproved the display of the emergency button pressed alert on Denkas.
- AméliorationImproved display of more specific errors when sharing a charger.
- Mis à jourLibrary updates on iOS.
- Mis à jourNew design for adding information about your electric vehicle
- CorrectionStatistics use the start date as the reference, so that they appear within a given time interval.
- CorrectionFixed a bug when entering an empty SSID on Poles and on iOS.
- CorrectionGerman translations corrected.
- CorrectionFixed the map bug on iPhones.
- CorrectionFixed a bug in the display of costs in the statistics.
-
- NouveauAdded alert for emergency button activated on Denka.
- NouveauAutocharge feature: List of authorized vehicles for Denka.
- NouveauNew flow in the photovoltaic diagram.
- NouveauShare charger directly via email.
- NouveauImprovement in the logs for uploading statistics manually.
- AméliorationImprovement of the charging skeleton on the home screen
- AméliorationBetter explanation of current per phase
- AméliorationImprovement of Italian translations
- AméliorationRemoved orientation restriction for greater compatibility with some tablets
- Mis à jourLibrary update
- Mis à jourFirebase library updated for greater security.
- Mis à jourCorrect order of the static IP configuration properties.
- CorrectionBug fix when updating EcoCharging with a specific time.
-
- NouveauAdded G2 type to the Goodwe inverter
- NouveauAdded charging limit on Denka units
- NouveauBattery capacity display on Denka.
- NouveauRemaining charging time on Denka
- AméliorationMore space in the bottom menu for some devices
- AméliorationImproved bottom menu view for users with very large font sizes
- Mis à jourChanges to the Solis inverter type
- Mis à jourChange in the statistics sample: I now take endCharge into account, as the server does.
- Mis à jourChanges to server calls, without the trailing slash
- Mis à jour"Wake-up mode" hidden
- Mis à jourHidden 'Common registers' type on DEYE inverter
- Mis à jourGPS is not an essential requirement to download the App.
- Mis à jourIt is no longer necessary to specify the user's area in the electric vehicle settings.
- CorrectionFixed a bug when retrieving data in Special Options
- CorrectionMinor bug fixes
-
- NouveauAllow SIM card data to be recharged without the e-Charger connected
- NouveauNew warning messages for sensitive functions
- Amélioration"Overall stability improvement"
- Mis à jourChange of the property name to term_resistor
- CorrectionThe bottom menu no longer overlaps the information
-
- AméliorationTotal improvement of Portuguese translations
- AméliorationTotal improvement of French translations
- AméliorationPartial improvement of German translations
- CorrectionFixed a bug when changing the power on Denka units.
- CorrectionBetter error handling on the map
-
- NouveauPhase map adapted for Trydan
- NouveauAllow secondary chargers to change the maximum and minimum current
- NouveauAccess restriction to charging profiles for non-master chargers, and separation of current limits
- NouveauChange and notice for DEYE inverter types
- NouveauAdded BUS termination resistor view to dynamic control
- NouveauImproved data loading on the network screen
- NouveauLocal load balancing for Trydan, show BUS termination resistor status
- NouveauImproved robustness in sending statistics over Bluetooth
- NouveauNew home screen (splash screen) configured and optimized
- NouveauImproved app restart without fully closing it; new finished designs with customizable background screen
- NouveauNew logic on the device's home screen
- NouveauNew data upload design on the home screen
- NouveauFinished supplier filter
- NouveauAdded skeletons (modern data loading) on the main screens
- NouveauNew server calls, transaction grouping and pagination
- NouveauNew server calls: listing and downloading invoices by type
- NouveauAdded a clock next to the time in statistics, changed € to a generic currency symbol, and the statistics list now appears under general statistics.
- NouveauNew DEYE type and added new Linky meter
- NouveauApp translated into Basque and refactored to make it easier to add new languages
- NouveauNew energy tariffs added
- NouveauAdded new screen to confirm free payments
- NouveauAdded another type for the Goodwe inverter
- NouveauWarning in the e-Charger restart message
- NouveauNew tariffs calculate their price correctly on the charging screen
- AméliorationDesign improvements and enhancements across all iPhone screens with Dynamic Island
- AméliorationImprovements to the statistics display
- AméliorationImproved the display of statistics over long time ranges
- AméliorationImprovement in the skeletons
- AméliorationInverters and meters, sorted alphabetically
- AméliorationCompetitive EcoCharging savings price and the ability to resume from any state
- AméliorationEnhancements to the device's main screen
- AméliorationImprovements in LetMeCharge
- Mis à jourRefactoring of the main screens
- Mis à jourSending the battery capacity as a number instead of a text string
- Mis à jourChanged server calls to the new transactions
- CorrectionHide Modification Type Portugal
- CorrectionFixed current limits on the main screen and redesigned/refactored the settings screen
- CorrectionFixed the numeric input type on some inputs that allowed text entry.
- CorrectionFixed a bug when selecting charging profiles: it always started on "weekdays".
- CorrectionFixed a bug in the photovoltaic GIF.
- CorrectionFix in the token refresh
- CorrectionFixed a bug when displaying the firmware version
- CorrectionFixed a bug when changing the cache
- Correction"Do not show the lock if the charger is not connected (Wi-Fi or Bluetooth) and fixed a bug when displaying the power level"
- CorrectionAvoid screen lock due to internet connection in statistics
- CorrectionFixed a bug when displaying statistics
- CorrectionFixed bug in dynamic control, undefined IP
- CorrectionFixed minor bugs
- SuppriméRemoval of unused screens
- SuppriméRemoved the card borders
- SuppriméRemoved unnecessary elements
- SuppriméRemoved the current limit per phase when the charger is single-phase
-
- NouveauNew permissions and restrictions based on e-Charger model and user role
- NouveauMaximum and minimum power limit on Denka
- NouveauAnimation without chargers adapted to the new design
- NouveauNew dynamic control for Trydans with version higher than 2.3.0
- NouveauAdded map (Coming very soon)
- NouveauNew design with bottom menu
- AméliorationCode refactoring for better maintainability
- AméliorationImproved reconnection between main screens
-
- Mis à jouriOS SDK update to allow publishing.
- CorrectionFixed a bug in the creation of the EcoCharging plan.
- CorrectionFixed font size on some screens.
- CorrectionFixed a bug when selecting static control on the Pole Pro.
- CorrectionFixed a bug when requesting location on Android 14.
- SuppriméFull removal of the load-balancing app between sockets (it is now included in the dynamic control operation).
-
- NouveauSerial number added to the Enphase inverter.
- NouveauStats chart added in EcoCharging.
- NouveauRefactoring of the application and new way of displaying dynamic control according to the version and model of the e-Charger.
- NouveauAddition of Italian language to Pole Pro.
- NouveauCo-owners can edit their credit card.
- NouveauDo not allow configuring charging profiles on a device that is not the Master.
- AméliorationEnhanced Bluetooth calls for Pole Pro.
- AméliorationImproved robustness when retrieving statistics via Bluetooth.
- AméliorationServer Call Refactoring.
- AméliorationTranslation improvements.
- AméliorationGreater robustness when changing a scheduled charge.
- AméliorationPerformance improvement at application startup.
- AméliorationImprovements to the connection setup screen.
- CorrectionFixed the invoice PDF download.
- CorrectionFixed a blank screen error when configuring the connection.
- CorrectionFixed error when updating via local Wi-Fi.
- CorrectionInconsistency fixed with OCPP: it appeared as enabled when it was not enabled via Bluetooth.
- CorrectionError fixed when displaying cost in charts with photovoltaic energy statistics.
- SuppriméElimination of load balancing between sockets on Poles; it now balances automatically through dynamic power control.
-
- NouveauAllow deleting e-Charger if Cloud Dynamic Control is enabled and you are not the Administrator
- AméliorationAvoid excessive calls on the main screen with multiple e-Chargers
- AméliorationTroubleshooting errors when editing RFID cards or Bluetooth key fobs
- Mis à jourUpdate the Denka's minimum current to 1kW
- Mis à jourLibrary updates and performance optimisation
- Mis à jourAllow power levels above 100 kW in charging profiles
- CorrectionFixed a bug when uploading statistics via Bluetooth.
- CorrectionFixed a bug when retrieving data from Shelly Pro in dynamic control
- CorrectionFixed a bug when adding the first charging profile via Bluetooth
- CorrectionFixed a bug when downloading invoices on any mobile device
- CorrectionFixed white screen bug when adding a Pole
-
- NouveauNew feature: added "Wake-up mode".
- NouveauTurn off notifications when you log out.
- AméliorationImprovement in optimization, higher speed.
- CorrectionFixed a bug when retrieving statistics via Bluetooth with photovoltaic discrimination.
- CorrectionFixed a bug when updating the reported property when changes are made to a property.
-
- NouveauStatistics show the cost with solar PV applied, and savings are also displayed.
- NouveauOption to change the LED brightness
- NouveauAbility to set a different COM address for the DDSU666-H meter
- NouveauAdded Fronius inverter types
- NouveauNew e-Charger Denka added
- NouveauNew tariffs added (Indexed and OMIE)
- NouveauNew properties of the Denka e-Charger added
- NouveauNew inverters added
- NouveauActivated EcoCharging alert
- NouveauAdded EcoCharging plan view
- NouveauDenka feature integration
- NouveauNow notifications are differentiated by type and can be selected according to the user's preference.
- NouveauTranslations of all new screens.
- NouveauSome options are disabled when cloud dynamic control is enabled.
- NouveauWarning message when changing the OCPP settings.
- NouveauAdded Deye inverter types to dynamic control
- NouveauAdded date filter to transactions.
- NouveauAdded new Shelly pro meter to dynamic power control
- AméliorationImproved French translations.
- Mis à jourFirmware update to version 2.2.7
- Mis à jourEmail verification submission form updated
- Mis à jourText changes for 4G and Ethernet.
- CorrectionFixed the error when displaying battery charging in the GIF.
- CorrectionFixed a bug on the RFID screen that would get stuck, loading indefinitely.
- CorrectionChanged the text on monthly invoices and fixed the default month on invoices.
- CorrectionFixed error when the server fails to request the MAC, and when the JSON fails to request the reported value via Bluetooth.
-
- AméliorationTranslation improvements
- Correction"Fixed the issue with the time change when editing hours in charging profiles"
-
- NouveauAdded the types for the Greenheiss inverter and the SAJ inverter.
- NouveauAdded an ion-range to the power selection of the charging profiles
- NouveauNew connectivity options for Trydan Pro (4G and Ethernet)
- NouveauReboot notice for the e-Charger when Wi-Fi is configured
- NouveauStatistics refresh for greater robustness
- NouveauExtension of time to add an e-Key for greater reliability
- AméliorationImprove the translations
- AméliorationImproved user messages on e-Keys
- Mis à jourRFID cards and e-Keys can be added, edited and deleted without needing to activate them.
- CorrectionFixed a bug where the scheduled time did not appear on Pole Pro.
- CorrectionFixed a time zone bug in charging profiles (it mainly occurred in Portugal).
-
- NouveauNew tutorial pop-up screen created for cases where something needs to be explained to the user in greater detail.
- NouveauError handling in charging profiles to alert the user if something has not been saved correctly.
- NouveauPhotovoltaic aggregated into the charging profiles for Pole Pro.
- NouveauImproved Bluetooth localization on some phones, and we show an error message if the Bluetooth connection fails.
- NouveauAdded COM 1 and COM 11 types to the Huawei Chint meter in dynamic power control.
- NouveauHidden the photovoltaic GIF for the Pole Pro models.
- NouveauOption to add a free COM address for the Huawei inverter.
- NouveauAdded the ability to configure a static IP for Pole Pro.
- NouveauAdded a new message in the GIF for when there is no photovoltaic production.
- NouveauNew translations added.
- NouveauAdded user information about configuring the static IP on Pole Pro.
- NouveauAdded 'car topic' to configure MQTT in dynamic control.
- AméliorationImprovement in the dictionary format (internal code).
- AméliorationImprovement in saving charging profiles: it is no longer impossible to save charging profiles with more than 5 time slots via Bluetooth.
- AméliorationOverall performance improvement of the application and code optimization.
- Mis à jourNew per-device notification handling instead of per-account, and unsubscription from them when the pairing is removed.
- Mis à jourSwitched the Bluetooth ID storage from localStorage to sessionStorage for more robust connection handling.
- Mis à jourName change from "V2C Meter 2.0" to "V2C ControlBox".
- CorrectionFixed bug sending MQTT username and password in dynamic control.
- CorrectionFixed a bug when displaying statistics that started at 00:00.
- CorrectionFixed a bug when switching languages: the save button was sometimes not displayed.
- CorrectionFixed a bug in the Shelly type submission in dynamic control.
-
- NouveauShare charger available in 'User management'.
- NouveauV2C Payments process opens within the same app for a more convenient payment experience for the user. (It does not work if the user has the MI Browser set as the default on their mobile phone; it does work for Google Chrome and Safari.)
- NouveauAdded a notice to the user to resume charging if V2C Payments is enabled.
- NouveauNew languages available for Trydan.
- NouveauDynamic power control and charging profiles available on Pole Pro.
- NouveauAdded Trydan compatibility with Enphase inverter.
- NouveauAdded Trydan compatibility with P1 meter.
- NouveauAdded Trydan compatibility with Modbus feeder meter.
- NouveauAdded new additional configuration options for MQTT.
- NouveauDifferentiation of types for Solis inverter (With or Without batteries).
- NouveauAdded the Romanian language to Trydan.
- NouveauAdded phase map configuration on Pole Pro under Special options.
- NouveauImplementation of DeadLetters for logging background user errors.
- NouveauPower tiers with current limit for Pole Pro.
- NouveauAdded no-meter option in dynamic control for Pole Pro.
- NouveauImportant notices when changing dynamic control to improve UX.
- NouveauNew screen, list of available slaves for Pole Pro when acting as Master.
- AméliorationFaster charging from the configuration while offline.
- AméliorationImportant improvement in the stability of the Bluetooth key fobs, both over WiFi and over Bluetooth.
- AméliorationImproved design of the Special Options.
- AméliorationImproved Bluetooth search and location on iOS.
- AméliorationImproved some Bluetooth methods.
- AméliorationUX improvement when changing the e-Charger name.
- AméliorationImproves Bluetooth stability on Pole Pro.
- Mis à jourChange from kW to W for battery discharge.
- Mis à jourChanged "Dynamic control configuration" to "Charging profiles".
- Mis à jourName change: the Bluetooth key fobs are now called e-Keys.
- Mis à jourIncreased Bluetooth scan time on the main screen.
- CorrectionFixed a bug when refreshing without any chargers.
- CorrectionFixed a bug where the mobile back button did not work correctly on some screens.
- CorrectionUpdating the RFID card or key fob list when activating them.
- CorrectionImproved invoice view in English.
- CorrectionDo not allow deleting e-Charger if the user is offline.
- CorrectionAllow the charger to be enabled from inside with the self-locking feature activated.
- SuppriméDeleting the Parking message in V2C Payments when the parking is free, to avoid confusion.
-
- NouveauAdded an alternative SolarEdge meter to the Dynamic Control.
- NouveauAdded confirmation before updating Firmware.
- NouveauMore and better translations.
- NouveauError handling in Payments.
- NouveauAdded new Google Home image.
- AméliorationImproved connectivity and Wi-Fi reception on the home screen.
- AméliorationOffline configuration screen will load faster.
- Mis à jourConsolidate RFID card activation and editing on a single screen. (The same applies to Bluetooth key fobs.)
- Mis à jourChanged Huawei-type to COM address.
- Mis à jourSend to the home screen after restarting the e-Charger.
- Mis à jourChange when we make a free transaction in Payments.
- Mis à jour"Do not allow changes to Payments when there is no Internet connection."
- CorrectionFixed a bug that asked for the Huawei type for any meter or inverter.
- CorrectionFixed a bug when displaying statistics for charging sessions carried out between 22:00 and 00:00.
- CorrectionFixed a bug when entering an empty power tier name.
- CorrectionFixed a bug in Payments with the free rate.
- CorrectionFixed a time zone bug in the statistics.
- Correction"Fixed small bugs."
-
- NouveauThere is now a new type of photovoltaic system in the power tiers, called "No injection or isolated".
- NouveauThe power tiers are stored on the server and in the cache to ensure correct operation on any device and in any situation. (With internet, without internet, with Bluetooth, etc.)
- NouveauAdded Bluetooth key fobs for the Trydan.
- NouveauAdded informative messages to the user for a better user experience.
- NouveauThe token is only requested once per minute or when entering the application, and it is cached for better speed (previously it was requested with every HTTP call).
- NouveauAdded the option to restart the e-Charger in "Special options".
- NouveauGoogle Home is now available, and the corresponding information has been added to the app.
- NouveauStronger error control in some posts for greater transparency for users.
- AméliorationImprovement in the retrieval and upload of statistics via Bluetooth.
- AméliorationImproved stability of some Bluetooth connections
- AméliorationImproved the design of the Payments screens.
- Mis à jourThe value will not be shown in the solar PV GIF if the data is 0 or null.
- Mis à jourIf the device language is Basque, the app will default to Spanish (previously it defaulted to English).
- CorrectionFixed the photovoltaic GIF that would freeze on some iOS devices.
- CorrectionMinor bug fixes.
-
- NouveauAdded the IP address to the WiFi information.
- NouveauTake the parking cost into account after charging with V2C Payments.
- NouveauShelly static IP explanation.
- NouveauReal-time updates of payment status on the main screen.
- NouveauNew inverters added.
- NouveauChange in Shelly inverter rates.
- AméliorationImproved Bluetooth reconnection on the main screen on iOS.
- AméliorationDifferentiated the option between swiping and clicking to lock the charger.
- AméliorationImproved Bluetooth stability for certain calls that sometimes failed.
- Mis à jourLarger button for payments without chargers.
- Mis à jourCorrected new QR format.
- Mis à jourAbility to modify OCPP via Bluetooth on Trydan.
- Mis à jourDesign change on the V2C Payments screen
- CorrectionFixed push notifications on iOS.
- CorrectionFixed the Google login issue on iOS when sharing the charger.
- CorrectionFixed error with the PVPC 2 format.
- CorrectionFixed an error when modifying tariffs.
- CorrectionFixed an error in the download of payment invoices.
-
- NouveauNew inverters added
- Nouveau"New notice if you have successfully obtained the statistics via Bluetooth"
- NouveauNow location is only required with Bluetooth turned on
- NouveauTake the batteries into account in the photovoltaic GIF
- AméliorationGreater consistency in data sending and receiving via Bluetooth
- AméliorationDon't let the user enter an empty RFID name and new translations.
- CorrectionFixed the retrieval of statistics via Bluetooth.
- CorrectionFixed the bug with the photovoltaic GIFs
- CorrectionFix for the notifications
Portail web V2C Cloud
Version actuelle 4.1.1 · 45 versions depuis décembre 2020
- NouveauActivate or deactivate the default rate for each e-Charger in Payments.
- NouveauEcocharging plan available for Oasys batteries.
- AméliorationUpload your own invoices in the Invoices section of Payments.
Versions précédentes 44
-
- NouveauMandatory location for e-Chargers in Payments.
- NouveauMake the charger public from Payments so that it is visible on other platforms.
- NouveauAssign a different rate to each group in Payments.
- NouveauMonthly fee rate within Collective Charging.
- AméliorationNew design for the Payments platform.
- 4.0.4AméliorationNew way to configure the Ingeteam inverter.
-
- NouveauItalian tariffs.
- 4.0.2NouveauRates by periods.
- 4.0.1NouveauBattery prioritization in charging profiles.
-
- AméliorationNew design of the portal v2c.cloud.
- AméliorationSupport for viewing on mobile devices.
-
- NouveauNew Sofar Solar inverter.
-
- NouveauSelect time zone, manually or automatically.
- NouveauNew Huawei Emma inverter.
- NouveauNew Azzurro inverter.
- AméliorationIncrease in code size on RFID cards.
-
- AméliorationNew rates added.
-
- AméliorationNew PDFs in Spanish and English in Payments.
- CorrectionCharging power limit on Denka.
-
- NouveauCharging stops upon reaching the selected percentage for Denka models.
- NouveauTPV icon.
- NouveauPossibility to see more chargers on the main page.
- NouveauCalculator in Payments rates.
- AméliorationSelection of the auto-lock time for Trydan with version 2.3.25 or higher.
-
- AméliorationChange in design when adding/modifying rates in Payments.
-
- CorrectionBug fixes in cloud installation.
-
- CorrectionFixing errors in RFID cards.
-
- NouveauCatalan language added.
- CorrectionBug fixes in the cloud power control.
- 3.2.12CorrectionFixing errors in power control profiles and in the meter list.
-
- Mis à jourImprovement in RFID cards to manually support 14 characters.
- 3.2.10CorrectionError fixing
-
- NouveauFiltering by status (online/offline) available for e-Chargers.
- AméliorationVisualization of the e-Chargers version on the homepage.
- 3.2.8AméliorationGrouping of types in Payments invoices.
-
- CorrectionFix when filtering date range in Payments and dashboard.
-
- AméliorationIncrease in the maximum number of power control profiles.
-
- NouveauItalian language in Pole Pro.
- Mis à jourOptional OCPP customization properties in Pole Pro.
-
- AméliorationCreation of more intuitive power profiles.
-
- AméliorationImproved visual aspect when creating power profiles for cloud power control.
- Mis à jourGreater reduction in the cloud power control zoom and the option to reset zoom changed to center the installation.
-
- AméliorationAbility to download statistics as a .xlsx file.
- CorrectionFixed various minor bugs.
-
- AméliorationAdded a waiting indicator when saving an installation in cloud power control.
- Mis à jourModified text and color according to the state of the e-Charger in cloud power control.
- CorrectionImages of e-Chargers in installation view in cloud power control.
-
- NouveauRight-click menu in cloud power control.
- NouveauSelect, copy, paste, duplicate, and delete multiple elements in cloud power control.
- AméliorationMove and zoom in on an installation with the mouse wheel in cloud power control.
- Mis à jourThe upper power limit in the charging profiles has been modified.
- CorrectionFixed various minor bugs.
-
- NouveauAdded Basque language
- AméliorationPerformance improvement on the e-Chargers page and control panel
- Mis à jourNew way to display the details of the e-Chargers
- CorrectionFixed various minor bugs.
-
- NouveauRight-click to delete an active item during the creation or editing of an installation in cloud power control.
- NouveauThe customer's email appears when downloading the transaction table from V2C Payments.
- AméliorationImproved interaction between elements during the creation or editing of an installation in cloud power control to avoid impossibilities.
- Mis à jourV2C Payments transaction table sorted by date in descending order.
- CorrectionFixed various minor bugs.
-
- Mis à jourNew validations when creating rates in V2C Payments.
- CorrectionFixed errors in displaying the power control settings.
- 3.1.0NouveauNew design of the portal v2c.cloud
-
- AméliorationGreater speed also on the main screen, and in the charging of the user's e-Chargers.
- AméliorationChange the configuration to parallel for faster data loading.
- Mis à jourAll the inverters and meters available in the App have been added.
- CorrectionFixing various bugs, updating and improving translations and user experience.
-
- NouveauAdded list of wifi networks
- NouveauAdded hamburger menu for better visualization of the canvas in smart charging.
- NouveauAdded shared user management
- NouveauAdded translations
- NouveauAdded user help for CSV download
- NouveauRomanian language added
- NouveauAdded the partner creation form
- AméliorationCharging acceleration of the e-Chargers
- Mis à jourChange the navbar to black
- CorrectionFixed issue with the smart charging zoom.
- 2.0.0NouveauAdded Smart charging
-
- NouveauAdded invitations to customers
- Mis à jourImage tags also translated
-
- NouveauAdded to the main screen charger in payment mode or not with icon
- NouveauNew translations added
- Mis à jourNew design of the main screen
- CorrectionFixed bug with colors changing upon logout
- CorrectionInvoice issue, the correct one was not downloading.
- CorrectionTransactions are now resolved quickly, and there is a change in the format of the rates.
- CorrectionResolved issue in payments with the tabs that were moving.
- CorrectionFixed 'Update software' and bug with charger statuses.
-
- NouveauAdded Payments option
- NouveauInvoices added in the new tab and can be downloaded.
- NouveauAdded flat rate or customized rate when adding a rate
- AméliorationImprovement in device charging
- AméliorationImprovement of designs to make them responsive on all devices
-
- NouveauAdded plus charger
- Mis à jourAdd charger in the same way as in the app
- Mis à jourWe show fewer decimals in the tables.
- Mis à jourChange the design of the side menu and some labels.
- Mis à jourRemoved donuts and changed design on the screen up button.
- CorrectionBug fixes and design improvements
- CorrectionFix letter design and login and main screen
-
- NouveauAdded software update in the configuration
- NouveauCost calculation according to the rate
- CorrectionChanging the rate is done correctly.
- CorrectionControlled error changing WiFi without connection
- CorrectionEnergy rate calculation is done correctly.
-
- NouveauYou can now log in by pressing enter.
- AméliorationCharging screen improves without connection
- Mis à jourChange of design if there is no connection
- CorrectionDynamic power control is adjusted properly.
- CorrectionGlobal statistics are now updating correctly.
- CorrectionFixed main screen hours
- CorrectionCSV data download in the correct format
-
- NouveauNew, more specific errors indicated for the user and installers.
- CorrectionBug fixes when linking devices.
-
- AméliorationImprovements in website performance.
- CorrectionFunctionality bugs fixed.
-
- NouveauStyle improvements.
- NouveauCreation of the V2C website.
- CorrectionBug fixes.