Updates
Nous travaillons continuellement à l’amélioration des fonctionnalités de nos produits. Consultez toutes les mises à jour des e-Chargers et de l’application multiplateforme V2C Cloud.
Trydan
2.4.6
mai 6, 2026
Corrections mineures OCPP
Fixed
Erreur de mots de passe OCPP
Fixed
Problèmes de connexion avec le CSMS après redémarrages
2.4.4
avril 29, 2026
Charge cible kWh, nouvelles fonctionnalités OCPP, nouveaux onduleurs et divers bugs.
Improved
Synchronisation horaire
Added
Charge cible kWh
Added
Nouveau modèle SMA Sunny Boy
Added
Nouveau modèle Fronius avec batterie
Added
Sélectionner l'adresse ID modbus API
Added
Nouveaux modèles Deye
Fixed
Bug mode exclusif avec batteries
Added
Inverters Sofar Solar
Added
Inverters Azzurro
Fixed
Coordonner "ContractedPower" et les profils de charge avec l'API HTTP
Fixed
Améliorer les erreurs RFID
Added
Sélectionner l'adresse MID
Improved
Mesures de la plaque de puissance 1.0
Fixed
Bug de charge mixte
Improved
Améliorations WiFi
Fixed
Bug mode photovoltaïque + minimum
Fixed
Bug statistiques sans FV par BLE
Added
EMMA Huawei
Added
Profil de sécurité 2 OCPP (wss + auth + CA cert)
Added
SIM 4G privées en OCPP
Added
OcppFreeMode
Added
OCPP file interne messages
2.4.2
février 2, 2026
Corrections mineures
Improved
Mise à jour OTA plus robuste
Added
Cartes RFID MIFARE Ultralight
Fixed
Bug de gestion de l'autolock avec le mode paiements
Fixed
Bug en mode paiements avec RFID
2.4.1
janvier 8, 2026
Bugs dans les onduleurs et améliorations mineures
Improved
Lecture des problèmes d'installation
Improved
Amélioration en mode BYD
Fixed
Bug avec l'inverseur Wibeee
2.4.0
décembre 15, 2025
Améliorations des onduleurs et des API modbus/HTTP, améliorations dans la gestion du contrôle dynamique et de la charge, OCPP plus robuste et corrections mineures.
Added
Obtenir la version du firmware via Modbus
Updated
Améliorations du contrôle dynamique
Updated
Amélioration des mesures des onduleurs Sungrow
Fixed
Erreur "Attente de Puissance"
Updated
Améliorations de la mise à jour par OTA
Updated
Améliorations du menu de la télécommande
Updated
Nouveaux modèles Deye
Added
GoodWe par Modbus TCP
Updated
OCPP : amélioration des MeterValues
Added
OCPP : GestionDuFirmware
Updated
OCPP : envoyer StatusNotification "Faulted" avec des erreurs et des avertissements
Updated
OCPP : publier la version actuelle
Updated
OCPP : Délai d'attente de BootNotification
Updated
Nouveaux serveurs NTP
Added
Verrouillage automatique
Added
Nouveaux modèles MID
Added
Nouveaux modes de réveil
Updated
Amélioration du scan WI-FI
Added
Permettre de changer le type de charge dans HA (monophasé, triphasé ou mixte)
Updated
Amélioration du compteur P1
Updated
Amélioration des journaux à distance
Updated
Limitation des appels IoT par chargeur
Added
Compteur Linky pour compteurs français
Fixed
Bug des cartes RFID avec des noms longs
Fixed
Erreur lors de la demande de la liste des SSIDs Wi-Fi via Bluetooth.
Fixed
Améliorez les statistiques via Bluetooth
Fixed
Améliorations de l'équilibrage local jusqu'à 10 dispositifs
Updated
Améliore la mémoire RAM
Updated
Stabilité par Ethernet
Updated
Traductions corrigées
Fixed
Erreur lors de l'envoi du code RFID dans les statistiques.
Added
Résistance de terminaison modbus
Added
Lecture des propriétés individuelles API HTTP
Added
Éteindre/Allumer le logo et l'écran LCD depuis l'API HTTP
Fixed
Bug avec le mode FV Exclusif et les batteries
2.3.20
juin 9, 2025
Nouveau contrôle statique de puissance pour Trydan. Améliorations clés du contrôle de puissance et compatibilité avec le marché européen.
Added
Le contrôle statique de puissance est ajouté (uniquement avec la consommation Trydan).
Updated
L'algorithme de contrôle de puissance a été modifié étape par étape pour appliquer une modulation PID.
Added
La charge mixte s'adapte aux tarifs européens.
Added
La programmation du contrôle de puissance avec des limites par phase est autorisée.
Added
Le contrôle de puissance s'adapte aux pays européens avec des limites d'intensité par phase.
Updated
Le contrôle de la puissance statique entre les prises ou entre les e-Chargers est amélioré.
Fixed
On évite la défaillance des enregistrements distants lors d'une déconnexion.
2.2.8
mars 13, 2025
Correction de bug avec les compteurs DTSU666-G
Fixed
Bug des compteurs DTSU666-G
2.2.7
décembre 4, 2024
Améliorations du Mode Réveil et du port MQTT
Fixed
Correction d'un bug lors du changement de port dans MQTT.
Improved
Amélioration en Mode Réveil
2.2.5
novembre 18, 2024
Programmation horaire avec EcoCharging. Améliorations dans la mise en œuvre du protocole OCPP, dans la lecture des signaux électriques et dans l’optimisation du système (réduction de l’utilisation de la RAM).
Added
EcoCharging pour programmer la charge automatiquement aux heures de lumière les moins chères.
Added
Allumage et extinction des LED via Modbus TCP/RTU. Option d'ajuster et de consulter l'intensité des LED et de l'écran LCD.
Improved
Lecture de la valeur de puissance des batteries dans les onduleurs Goodwe EH et ET
Added
Compatibilité avec le nouveau modèle de compteur Chint DTSU666-G, permettant une intégration plus large dans différentes installations.
Improved
Optimisation du système : réduction de l'utilisation de la RAM, améliorant la stabilité et les performances générales du système.
Added
Mise à jour du firmware du compteur V2C ControlBox (2.0) via le point d'accès (AP) et l'application mobile
Added
Amélioration de la lecture des signaux électriques : Détection de l'état F mise en œuvre, améliorant la capacité du système à reconnaître et à réagir à différentes conditions opérationnelles.
Improved
Amélioration de la lecture des signaux électriques : Vérification améliorée pour l'état E, en plus de l'omission des valeurs nulles du DMA pour éviter des lectures incorrectes.
Improved
Amélioration de la lecture des signaux électriques : Désormais, le signal CP (Control Pilot) est lu en utilisant une tâche parallèle, ce qui améliore la précision et la réactivité du système lors de l'interaction avec le véhicule électrique.
Improved
Amélioration de la lecture des signaux électriques : Stabilité améliorée pendant ce processus de calibration via l'application.
Added
Amélioration de la lecture des signaux électriques : La lecture du signal PWM d'entrée a été mise en œuvre en utilisant le DMA (Accès Direct à la Mémoire), améliorant l'efficacité et réduisant la charge de traitement.
Fixed
OCPP : Correction d'un faux avertissement de détection de carte qui apparaissait au démarrage du système, évitant ainsi les confusions et améliorant l'expérience utilisateur.
Improved
OCPP : Résolution des noms d'hôte. Optimisation des bibliothèques pour améliorer la résolution DNS et la fiabilité des connexions sécurisées via WebSocket sécurisé (WSS), augmentant la stabilité de la communication avec des serveurs distants.
Improved
OCPP : Garantie que toutes les informations importantes parviennent au serveur une fois la connexion rétablie grâce à une file d'attente de messages persistante.
Improved
OCPP : Notifications d'état. Amélioration de la communication avec le serveur central pour l'envoi des notifications d'état.
Added
OCPP : Raisons détaillées des fonctions OCPP, fournissant des informations plus complètes sur les actions effectuées et facilitant le diagnostic et l'analyse des événements.
Added
OCPP : La capacité de fonctionner en modes hors ligne, permettant au chargeur de fonctionner correctement même sans connexion au serveur. Les messages en attente sont stockés et envoyés une fois la connexion rétablie, garantissant une communication fiable et cohérente.
Added
OCPP : Nouvelle machine d'états OCPP. Désormais, le système se connecte au Serveur Central (CS) OCPP et reçoit la plupart des commandes, améliorant ainsi l'interopérabilité et le contrôle à distance.
2.1.17
juillet 15, 2024
Amélioration de la gestion de la mémoire et des connexions Modbus TCP, ajout de SAJ hybrides et Shelly Pro.
Added
Lecture et écriture de la tension manuel d'installation pour les intégrations Modbus TCP et HTTP
Improved
Détection de fuite
Fixed
Informations sur les cartes RFID selon la norme des plateformes OCPP pour leur compatibilité avec des plateformes telles que E-flux, Monta…
Improved
Gestion de la mémoire pour éviter les redémarrages inattendus avec OCPP et la suppression des profils de puissance programmée.
Added
Inverters SAJ hybrides
Added
Compteurs Shelly Pro
Improved
Connexions Modbus TCP de Trydan et Trydan Pro avec des onduleurs Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA et SAJ Hybrid avec l'erreur 252.
Fixed
Collision entre les éléments SPI (RFID, Ethernet et extensible GPIO) de Trydan Pro
Improved
Visualisation du processus d'authentification des cartes RFID dans OCPP
Added
Informations sur la réponse /RealtimeData de http à la demande du développeur de l'intégration officielle de HA.
Added
Méthodes directes pour activer le point d'accès (WiFi AP) et pinger une IP spécifique.
Added
Sujet trydan_v2c_voltage pour écrire la tension de l'installation par MQTT
Improved
La mémoire utilisée dans JSON et OCPP passe à la RAM SPI.
2.1.11
juin 5, 2024
Changements visuels et corrections mineures
Added
Adaptation de l'OCPP à de nouveaux systèmes centraux
Fixed
Clignotement des LED lorsqu'il n'y a pas de connexion
Fixed
Bug dans Greenheiss hybride
Added
Nouveaux modèles Deye
Improved
Améliorations de la détection du sens de la boîte de contrôle V2C 2.0
2.1.10
juin 3, 2024
Corrections de bugs mineurs, ajout de Shelly Pro (EM et 3EM) et Deye triphasé.
Improved
Afficher du texte sur des compteurs bidirectionnels
Fixed
Erreur avec la langue française
Improved
Lectures avec Fronius et DTSU666
Fixed
Lever le serveur HTTP via Ethernet
Improved
Temps de réaction dans le détecteur de fuites
Fixed
Erreur dans les paiements
Added
Deye / Turbo Energy triphasé
Fixed
Lecture seule dans les propriétés de l'OCPP
Fixed
Enregistrer des segments de puissance via Bluetooth sur certains appareils
Added
Shelly Pro EM et Shelly Pro 3EM (Bêta)
Fixed
Mesures Shelly Portugal
Improved
Afficher Attente de Charge en mode Arrêt
2.1.7
mai 6, 2024
Correction de bugs mineurs de la version précédente.
Improved
Afficher l'arrêt en raison du contrôle dynamique
Improved
Redémarrages en raison d'une tentative de reconnexion
Fixed
Mesure NaN sur certains compteurs
Improved
Protocole de QA
Improved
Lecture de Tension et Température PCB Puissance
Fixed
Erreur dans les lectures Home Wizard
Added
Logs distants en direct
2.1.4
avril 22, 2024
Améliorations des performances et de la compatibilité. Trydan est désormais plus efficace et compatible avec la norme OCPP, avec des processus de QA plus solides. Il optimise également l’utilisation de la mémoire et renforce les statistiques pour fournir des données plus précises.
Improved
Amélioration des performances et compatibilité future entre Trydan et Trydan Pro
Improved
Améliorations du protocole OCPP
Improved
Améliorations du processus de QA
Improved
Amélioration de l'utilisation de la mémoire
Improved
Statistiques plus robustes
1.7.17
décembre 12, 2023
Mise à jour d’Azure, nouveau BLE, modification pour réveiller le véhicule.
Improved
Mise à jour des bibliothèques Azure
Improved
Mise à jour des bibliothèques ESP-IDF et Arduino-ESP32
Added
Réseaux avec sécurité WPA3
Fixed
Modification des batteries Deye/Turbo Energy
Improved
Communication des investisseurs via connexion WiFi sans Internet
Fixed
Sujets MQTT personnalisables et utilisateur/mot de passe
Added
Nouveau BLE (NimBLE)
Fixed
Rapport des statistiques après déconnexion
Fixed
Compatibilité BLE de l'iPhone
Added
e-keys via connexion BLE
Improved
Amélioration de la mise à jour du compteur V2C 2.0
Improved
Amélioration de l'OCPP, adaptation pour supporter les déconnexions
Improved
Amélioration de la détection de la clé.
Fixed
Fonctionnement du compteur V2C 2.0 la nuit
Improved
Taux de rafraîchissement amélioré
Added
Nouvelle langue : Roumain
Fixed
Date et heure automatiques
Added
Enphase version 7.x.x, Solis avec batteries
Fixed
Interaction avec Megane
Added
Adaptation de la plaque de puissance i2c
Improved
Amélioration des valeurs sur Huawei, amélioration Chint de Huawei et révision de fin de charge.
1.6.18
juillet 17, 2023
Mise en production et petites corrections
Improved
Routine de récupération WiFi
Added
Bug en mode triphasé photovoltaïque
1.6.17
juillet 10, 2023
Améliorations et stabilisation de la connexion avec Azure
Added
Charge triphasée mixte disponible via le menu physique
Added
Ajout d'un compteur MID triphasé
Added
Inclusion du serveur ID 2 dans les onduleurs SolarEdge
Added
Ajout de registres Modbus avec la mesure du compteur
Added
Ajout de commandes http pour l'intégration avec HA
Added
Enphase Envoy Inverseur (bêta) (versions 5.x.x)
Added
Détection de l'erreur V2C 2.0 de pince non connectée
Added
MQTT Esclave avec authentification utilisateur/mot de passe et sujets personnalisables (bêta)
Improved
Amélioration du WhatchDog pour éviter le gel du système
Improved
Amélioration du scan des WiFi à proximité
Improved
Protocole de reconnexion du service BluetoothLE
Improved
Optimisation WiFi IRAM et affinité avec la tâche Azure
Improved
Protocole de reconnexion en l'absence de WiFi
Improved
La réinitialisation d'usine
Improved
Le code d'erreurs et l'interface des LED
Improved
Amélioration du mode Installation isolée et décharge 0
Improved
Réduction du temps de coupure par contrôle dynamique à 1 min
Improved
Détection automatique de l'heure et du créneau horaire
Improved
L'optimisation et la refactorisation des esclaves de mesure
Improved
Le déverrouillage avec BLE Tag
Fixed
Gelures sporadiques de l'écran LCD
Fixed
Faux positifs du détecteur de fuites
Fixed
Problèmes avec le compteur MID
Fixed
Erreur LED lors de la mise à jour
Fixed
Valeur par défaut des variables de type JSON
Fixed
Mesure à 0 sur l'inverseur Deye/TurboEnergy
Fixed
Erreurs visuelles et attribution des adresses de l'équilibrage local
1.6.11
avril 13, 2023
Corrections de la 1.6.9 et nouveaux compteurs
Added
Remise Solaire sur Raccourcis
Improved
Améliorations OCPP et testé sur MONTA
Fixed
LCD gelé
Added
Deye/TurboEnergy Inverseur Beta
Added
Phoenix Contact compteur
Added
Compteur Carlo Gavazzi
Improved
Problèmes de contrôle dynamique
Improved
Reconnecter et Stabilité du WiFi
1.6.9
mars 27, 2023
BETA : Fixations et compteur MID
Added
Mode Isolé en Modes Photovoltaïques
Fixed
Verrouillages et déverrouillages inattendus
Fixed
Clignotement blanc en mode verrouillé supprimé
Added
Langues néerlandaise, danoise et valencienne
Improved
Protocole de l'Équilibrage Local et priorités
Improved
Détection des ports et des hôtes dans OCPP
Fixed
Erreur de sélection des esclaves en beta
Added
Modes de capteur de fuite (menu de l'installateur)
Added
Compteur MID (menu de l'installateur)
Improved
Version stable de SMA Sunny Boy
Improved
Version portugaise de Wibeee
Improved
Fronius mesurant la consommation de la maison
Fixed
Erreur des onduleurs triphasés SolarEdge
Added
Nouveau protocole Ingeteam (Gestion des Batteries)
Added
Compteurs triphasés DTSU666
Added
Compteurs triphasés SDM
1.6.8
mars 3, 2023
Améliorations générales
Added
Modifications et améliorations dans le calibrage
1.6.7
janvier 30, 2023
Calibration pour le nouveau matériel
Improved
Calibration adaptée au nouveau matériel
Fixed
Analyse des données sur Kostal Piko corrigée
1.6.5
janvier 23, 2023
Équilibrage local et améliorations générales
Added
Équilibrage local entre les Trydan disponibles via WiFi ou câblé
Fixed
Bug sur Max et Min Intensité par modbus corrigé
Improved
Tension d'installation configurable
Added
SDM-220/320/120 (Testé avec la marque Eastron)
Added
Compteur DDSU-666 (Commun dans les installations Huawei)
Added
Auto-calibré sans besoin de voiture
Added
Heure manuelle disponible
Improved
Nouveau processus de fabrication
Fixed
Faux positifs dans le détecteur de fuites corrigés
Added
Requêtes HTTP pour gérer les enregistrements
Added
Nouveaux enregistrements Modbus
Improved
Inclus Shelly triphasé mais sans mesure de FV
Added
Inverters Greenheiss
Added
Inverters SAJ
Added
Inverters Solis câblés
Improved
Consommation de la voiture par MQTT corrigée
Added
Temps de réponse dans le contrôle dynamique configurable
Compatibility
Modèles bêta de Goodwe : la mesure de la batterie est annulée.
Improved
Menu physique amélioré et plus intuitif
1.5.10
décembre 12, 2022
Fixations sur Shelly avec seulement triphasé et plantages de Goodwe.
Added
Prévention des conflits entre les esclaves et le cloud
Fixed
Conflits de GoodWe et l'initialisation Azure
Fixed
Fix en Shelly avec seulement triphasé
1.5.9
novembre 28, 2022
Correctif Modbus et erreur avec les notifications
Improved
Envoi des statistiques en attente une seule fois
Fixed
Modbus Multiples Lectures Hotfix
Improved
Shelly 3EM triphasé et modification pour le Portugal
1.5.8
novembre 22, 2022
Améliorations générales, calibration et raccourcis par WiFi
Improved
Améliorations de l'OCPP
Added
Nouveaux enregistrements Modbus
Added
Lecteur RFID en version alpha
Fixed
Erreur de fuseau horaire via Bluetooth
Added
SolaX X3 hybride compatible
Improved
Amélioration du scan des WiFis
Fixed
Échec de la synchronisation Trydan - APP
Improved
Amélioration des routines de reconnexion
Fixed
Configuration de l'IP statique sur Trydan par WiFi
Fixed
Erreur lors de l'enregistrement des paramètres Modbus
Added
Calibration et raccourcis disponibles par WiFi
1.5.6_jungle
octobre 26, 2022
Communication avec la voiture, calibration et GoodWe hybrides
Added
Nouvelle méthode de calibration de la communication avec la voiture
Improved
Amélioration de l'analyse de la communication avec la voiture
Added
Version Beta des GoodWe ET/EH/BT/BH
1.5.5_jungle
octobre 17, 2022
Nouveau contrôle dynamique et nouveaux onduleurs
Improved
Reformulation de l'algorithme de Contrôle Dynamique
Improved
Amélioration de la vitesse de rafraîchissement des onduleurs Huawei
Improved
SolarEdge stable (Compteur mesurant l'exportation)
Added
Auto-verrouillage après 60 secondes sans voiture (raccourci)
Added
Modification pour installations Triphasées au Portugal pour V2C 2.0
Added
Kostal Piko est ajouté.
Fixed
Sauvegardé en mémoire après écritures par Modbus TCP et RTU
Improved
Version stable de GoodWe
Fixed
Bug dans les mesures de FV et pics résolu pour V2C 2.0
Improved
Détection de l'état D et E selon le protocole.
Improved
Processus de QA amélioré
1.5.4
septembre 26, 2022
Améliorations d’Azure et vérification de la charge
Added
GoodWe en version bêta
Improved
MQTT en version stable
Added
Vérifiez l'état de charge pour éviter les charges courtes (Voiture à 100 % ou en charge programmée)
Improved
Victron en version stable
Improved
Amélioration de la connexion avec Azure
1.5.3
septembre 16, 2022
Patch d’inverseurs en version bêta et esclave MQTT
Improved
Détection du sens de la puissance dans Wibeee
Fixed
Les onduleurs Victron et SolarEdge faisaient tomber le système.
Added
Esclave MQTT version bêta
1.5.2
septembre 14, 2022
Nouveaux compteurs et correction des erreurs
Added
Inverseur SolarEdge ajouté (Bêta)
Added
Inverseur Victron ajouté (Bêta)
Added
Autolock activé dans le raccourci (60 s)
Added
Détection automatique du fuseau horaire
Fixed
Correction d'une erreur en mode puissance minimale.
Added
Compteur alternatif pour la consommation de la voiture (RS485)
Added
FV Exclusif avec variation configurable
Added
Nouveaux Langues (Français, Italien et Allemand)
1.5.1
septembre 5, 2022
Améliorations de la version 1.5.0
Fixed
Résolution des problèmes de configuration IP Trydan avec WiFi et BLE.
Fixed
Résolus les problèmes de configuration de l'IP Shelly BLE.
Improved
Améliorations du Contrôle Dynamique avec des batteries
Improved
Améliorations du Contrôle Dynamique dans les Installations Triphasées (Mode Exclusif et Puissance Minimale)
1.5.0
août 29, 2022
Nouveaux compteurs, correction des erreurs et autres options
Added
Inclusion du compteur Wibeee
Added
Esclave 2.0 compatible avec l'installation Type 1 et Type 2
Added
Changement dans le clignotement de la connexion établie
Updated
Première version stable d'Ingeteam
Updated
Amélioration de la rapidité du détecteur de fuites
Improved
Inclusion de l'intensité maximale dans OCPP (comme propriété)
Added
Détection et mesure de charge bifasique
Added
Amélioration de la collecte et de l'envoi des données de charge
Improved
Amélioration de la lecture des onduleurs Solax
Improved
Inclusion de batteries dans les onduleurs Huawei, Ingeteam et Fronius
Improved
Serveur ModbusRTU et Modbus TCP sur Trydan
Added
Compteur alternatif Phoenix Contact (ModbusRTU)
Added
ModbusRTU sur Trydan (esclave et maître simultanément)
Added
Configuration d'IP statique sur Trydan
Added
Possibilité de sélectionner l'IP dans Shelly
1.4.9
juillet 25, 2022
Correction des équipements de production : ne sauvegardent pas le WiFi.
Fixed
Solution d'erreur de fabrication lors de l'enregistrement du WiFi
1.4.8
juillet 8, 2022
Améliorations de comportement rapportées par les clients
Added
Éliminer les fausses erreurs de communication des esclaves.
Added
Enregistrer le premier Shelly auquel se connecte Trydan
Updated
Avec le contrôle dynamique désactivé, maintenir l'intensité après finishProgramedSaveMode.
1.4.7
juillet 4, 2022
Améliorations dans OCPP et scan WiFi
Improved
Amélioration de la récupération de télémétrie dans OCPP
Improved
Amélioration du scan des WiFi à proximité
1.4.6
juin 16, 2022
Mise en œuvre de Home Assistant OCPP et améliorations génériques
Added
Ping interne d'Azure toutes les 15 secondes pour détecter les déconnexions.
Improved
Migration de l'I2C de l'horloge et de l'écran LCD vers l'idf natif
Added
Reconexions séparées pour éviter de faire tomber le serveur.
Added
Adaptation de l'OCPP pour fonctionner avec Home Assistant
1.4.5
juin 6, 2022
Correction de bugs mineurs
Fixed
Récupération des transactions OCPP pour éviter les pannes de télémétrie
Improved
Augmentation de la taille maximale du binaire sur le webServer local
1.4.4
mai 31, 2022
Amélioration du calcul de puissance et correction des erreurs
Added
La configuration de différents ID pour les onduleurs Huawei est ajoutée.
Fixed
Correction du blocage par Mode de paiement et OCPP après désactivation de ceux-ci.
Improved
Correction de la lecture de puissance de la maison
1.4.2
mai 23, 2022
Inclusion de l’OCPP, mode de paiement et amélioration des onduleurs.
Improved
Amélioration de la stabilité et reconnexion du WiFi et du Bluetooth
Fixed
Amélioration de la reconnexion dans les onduleurs et correction après mise à jour des Huawei SUN2000.
Added
Mode de Paiement (V2C Payments)
Added
Protocole OCPP
1.3.13
mai 23, 2022
Correction sur le serveur local
Fixed
Correction de la taille maximale du fichier de mise à jour sur le serveur local
1.3.12
mai 2, 2022
Amélioration de la deuxième version de fabrication de Trydan
Fixed
Routines de Shelly et Solax corrigées
Added
Liste des WiFi disponibles depuis Trydan (pour visualisation depuis iPhone et Android)
Improved
Reconnaissance avec V2C Cloud après une perte de communication
1.3.7
avril 14, 2022
Deuxième version de fabrication de Trydan
Added
Raccourcis sur les boutons : Verrouiller et Programmation de Charge
Improved
Amélioration du code d'erreurs par LED
Added
Page Web Locale de configuration du Trydan accessible via AP ou STA WiFi
Added
Mode AP lorsque le WiFi configuré n'est pas disponible
Improved
Adaptation pour la compatibilité des onduleurs Huawei
1.2.2
mars 15, 2022
Améliorations supplémentaires
Improved
Améliorations de l'écriture à l'écran et nettoyage des caractères étranges
Improved
Amélioration de l'envoi de statistiques à la fois par WiFi et BLE.
Added
Nous ajoutons la connectivité avec les onduleurs Fronius.
1.1.0
février 4, 2022
Version initiale stable de Trydan. Première version de production.
Added
Correction des erreurs x et y
Pole Pro
Si vous préférez consulter les mises à jour de la version précédente de Pole, cliquez ici.
6.0.9
mai 18, 2026
Added
Option to fully disable the WiFi module at hardware level from the charger settings
Improved
More reliable RFID card reading with optimized antenna configuration from first use
Improved
Improved stability and responsiveness of the charger's web interface
6.0.8
mai 12, 2026
Added
Support for Chint DTSU666/DDSU666 meter
Added
OCPP - Immediate "Preparing" status when receiving a remote start command via OCPP
Added
WiFi disabled by default on devices without WiFi configured
Improved
More reliable RFID card reading with periodic reader reinitialization
Improved
Better cable connection detection and RFID timeout handling
Improved
CDP - More stable network device discovery, preventing unnecessary register/unregister cycles
Improved
Improved stability when applying configuration changes to the charger
Improved
Automatic migration of legacy pending OCPP messages after update
Improved
Improved network handling when switching between manual and automatic IP configuration
Fixed
Power factor value conversion for Carlo Gavazzi meters
Fixed
Improvements in power measurement accuracy in single-phase or two-phase installations
Fixed
OCPP - Smart Charging profiles with defined duration now applied correctly
Fixed
OCPP - Local authentication cache overflow that could prevent charging sessions from startIing
Fixed
OCPP - OCPP transactions stuck due to unreleased semaphores or null keys
5.1.10
mars 11, 2026
Added
Integrated leak detection system with automatic charger notification and lockout
Added
Enhanced web server for accessing and editing charger properties
Added
Visual improvements to the web server interface
Added
Persistent price display on screen when the payment system is active
Added
Refined error reporting to the cloud
Added
Power loss detection
Added
Wi-Fi disable option from the installer panel
Added
New buzzer system implementation for white boards
Improved
Enhanced RFID calibration with on-screen indicator during the process
Improved
RFID reader no longer forcibly activates when OCPP or Payments are active; explicit configuration is respected
Improved
Refined cable connect/disconnect notification on each event when payments are active
Improved
Optimized RFID card readings
Improved
OCPP - Improvements to the offline transaction queue
Improved
Internal connection optimization and overall performance improvements
Fixed
OCPP - Improved measurement value reporting
Fixed
Refined out-of-range measurement error detection
4.4.14
novembre 4, 2025
Added
Manufacturing test improvements for Polepro with built-in TPV
Added
Software-level leak detection enable/disable
Improved
Adjusted cooldown time between charges when a leak is detected
Improved
OCPP - Improvements to the offline transaction queue
4.4.12
octobre 3, 2025
Added
- Added Basque language.
Improved
- When OCPP is active, we now show on screen when card passed is not registered in central system.
Fixed
- After update OCPP image and QR is now recovered.
4.4.8
août 27, 2025
Fixed
- Fixed OCPP crash when phase map configuration does not correspond with measurer type.
Fixed
- Fixed issue where it didn't allow a remote start if a car is connected but not in an active transaction.
Fixed
- Fixed issue in setup interface.
Fixed
- Fixed monophasic Carlo Gavazzi measurer.
Fixed
- Fixed OCPP issue where it wouldn't charge in connector 2 if connector 1 is charging.
4.4.3
juillet 17, 2025
Improved
- Optimised automatic system reboot to reduce system load.
Improved
- Improved network features mainly 4G connection.
4.4.1
juin 24, 2025
Improved
- Improved OCPP charge handling.
Improved
- Enhanced reliability in the smart charging logic.
Improved
- Improved features when stopping a charge with invalid identifiers.
Improved
- Improved QR configuration for OCPP.
Improved
- Improved error handling when sensors or communication components fail.
Improved
- Better log management to prevent the device’s storage from filling up.
Improved
- Improved USB connection features.
Added
- The charger can now display a message when charging is limited due to low power.
Improved
- Improved RFID calibration and detection display.
Improved
- Improved features related to Bluetooth.
Improved
- Improved dynamic power control allowing charge at minimum intensity if master is not detected.
4.1.1
mai 6, 2025
Added
- System time is now synced with the central system when OCPP is active, ensuring accurate time reporting
Added
- Manual timezone setting is now available – The user will be able to configure the timezone even if automatic detection is disabled
Improved
- Improved updater
Added
- Created a contingency page in case app is not running
Fixed
- When locking a connector while charging, it now sends end charge telemetry correctly
Improved
- Improved network connections
Fixed
- Fixed dynamic control issues
Improved
- Improved OCPP meter values
Added
- Added Italian option for screen
Improved
- Improved discovering devices when dynamic control is active
Improved
- Improved user interface when updates are in progress
Improved
- Local load balancing is now implemented as dynamic control based specific conditions
Improved
- Improved Bluetooth connection
Improved
- Improved 4g connections robustness
Fixed
- Fixed Carlo Gavazzi power meter
Added
- Added default payment QR to pay without app
Fixed
- Fixed OCPP LMS, diagnostics, and charging profile clearing
Improved
- Improved STM32 lock timings
Added
- Added new OCPP personalization options - The user can now set 2 QR codes on the screen
Improved
- Improved OCPP now allows external intensity limits
Improved
- Improved data consumption
3.7.1
janvier 14, 2025
Added
- TPV
Added
- Added shared library
Fixed
- Fixed power control issues
Improved
- Improved version/update manager
Fixed
- Fixed that when locking connector during a charge it now ends correctly
Improved
- Improved megabyte conversion of Network Monitor
Fixed
- Recalculate reboot time when changing time with ble
Improved
- Obtaining timezone now doesn't need to have correct time by using only http urls
Added
- Timezone can be set manually
Improved
- Mobile usb device name is now obtained dynamically since more usb ports might be used due to TPV
Added
- Time is now synced with Central System if OCPP is active
Fixed
- We now show on screen when non registered RFID is passed while OCPP is active
Fixed
- Fixed OCPP freemode rfid issues
Fixed
- Duplicate StatusNotifications are removed from offline queue
Fixed
- Fixed "infinite" OCPP offline queue issue
3.6.23.1
octobre 3, 2024
Added
- Modbus tcp server that can read and modify certain properties of the charger
Improved
- We now show on screen different wifi images depending on how strong signal is to let know the user how good the connection is
Improved
- General OCPP improvements: we check connection to CS instead of internet for local functioning, we notify a real value now when there's a stop transaction due to power loss, fixed edge cases where connectivity is lost, new ocpp key MaxEVCurrentOffered implemented which limits charge with key instead of smart charging handler, safety mechanisms for ocpp to be more robust
Improved
- In 4g, increased rssi range for "excellent" so that it indicates correctly when the reception is good
Updated
- Access point time increased to 15 minutes
Improved
- Improved data consumption
Fixed
- Handled issues when SSID has whitespace
Added
- APN can now be set manually
Improved
- Improved robustness of update
3.5.22
juillet 23, 2024
Fixed
- Access point improvements.
Fixed
- Fixed QA issues.
Added
- Added Carlo Gavazzi debug measures.
3.5.19
juin 25, 2024
Fixed
- Fixed issue where things on screen were missing in one connector chargers.
Updated
- Fixed BLE connection with iphone and fixed bluetooth communication error that appeared on app.
Improved
- Fixed unset RFID.
Updated
- Network improvements. No interface resets performed at boot which improves bootup time. Network changes now don't require reboot. When changing WIFI settings or ip ethernet settings, it connects after setting it instead of rebooting.
Improved
- Fixed Unknown measurer and made distinction between Unknown measurer and wrongly configured measurer.
Added
- New telemetry event for payment mode.
Added
- New direct method to obtain additional information for Smart Charging.
Fixed
- Fixed time/timezone issue caused when the date is off by a few days.
Added
- Fixed random reboot time.
Fixed
- New property added to toggle if vehicle should be able to charge even though measurers aren't working ( Only works when OCPP, payments or dynamic control isn't enabled ).
Improved
- OCPP Free mode can be toggled through OCPP keys.
3.5.5
mai 7, 2024
Fixed
- Increased SAS token time to live of azure.
Added
- Improved message on screen when car is in state B.
Added
- Reflect on screen when charge is paused.
Added
- Made reboot time random.
3.5.0
avril 25, 2024
Fixed
- Fixed set threshold values and neopixel leds of Stm32. We can now also obtain control pilot value from Stm32.
Added
- We now show on the screen when the next programmed charge will start.
Improved
- Fixed OCPP inverted measurer error.
Fixed
- OCPP ConnectionTimeOut value can now be changed on the fly.
Fixed
- We now report iccid of sim card is connected. If sim is connected but we can't obtain iccid, we send dead letter.
Updated
- Changed led colors. Switched State A (now white) and State B (now green) colors.
Fixed
- Fixed log download of http interface.
Improved
- Added mechanism to disable or enable Wifi and bluetooth.
Added
- Changes made to reduce network usage that can be toggled on or off.
Improved
- We now report information regarding which type of connection to the internet the e-charger has.
Added
- Fixed case where config is corrupted or missing and would give trouble at startup.
Added
- We now send dead letter if cpu gets too hot and cpu temperature is now logged.
3.4.35
avril 12, 2024
Added
- Improved 4g initialization.
Added
- LTE signal is now reflected correctly instead of always showing great signal.
Improved
- Fixed wathdog reboot after doing hard reset.
3.4.18
février 26, 2024
NOT DOWNGRADEABLE TO VERSION 3.3.1
Updated
- General bug fixes.
Added
- Added dynamic photovoltaic.
Improved
- Improvements in dynamic control, fabrication, QA, Azure, OCPP, config handling, 4g, access point and stm32.
Added
- Added dead letters: measurer fails and kernel error.
Improved
- We now obtain timezone through url.
Improved
- Removed raspbian logo and desktop during boot and added V2C logo.
Added
- Property "wifi_info" is now reported.
Added
- Property "wifi_static" can be set through ble.
Added
- We can now obtain statistics through direct method.
Fixed
- When downgrading we ensure that version we downgrade to is compatible.
Added
- Added individual log level for each type of logger.
Added
- Added neopixel led type for stm32.
Improved
- Changed default language after fabrication from english to spanish.
Added
- We can now set threshold values with stm32 and get control pilot value if debug log of "Stm32" is activated.
3.3.1
novembre 20, 2023
Improved
- Properties "powerweekday", "powerweekend" and "phase_map" can be changed through bluetooth.
Improved
- Changed configuration handling to differentiate internally and externally set variables so that externally set or obtained variables are handled accordingly following the property schemas.
Added
- We can now set ethernet static ip configuration through the access point interface and direct method.
Fixed
- We now report wifi_static with static ip configuration.
Fixed
- Statistics are now saved locally.
Added
- Fixed property "ocpp" change bug.
3.3.0
novembre 15, 2023
Added
- Minor changes in meter reads.
Fixed
- Validate configuration with schemas during loading.
Improved
- Measurer fails are now registered with modbusrtumeasurer.
Improved
- Screen font bigger for small title.
3.2.4
novembre 9, 2023
Added
- Direct method to change ocpp interface and ocpp freemode.
Improved
- Fixed error 3 not appearing on screen.
Improved
- Fixed energy by hour bug.
Added
- OCPP authorize can now function by connector.
Added
- OCPP WSS connection.
Improved
- Changed measurer reading approach for faster reads.
Improved
- With dynamic balancing we now show used and available power in frontend.
Added
- Fixed OCPP parent id tag bug.
Added
- OCPP meter values now work for 3 phases.
3.2.3
novembre 2, 2023
Improved
- Added changing dynamic configuration through bluetooth.
Improved
- We show dynamic balancing information on screen.
Improved
- Simplified handling of configuration.
Improved
- Improved dynamic balancing.
3.2.2
octobre 27, 2023
Improved
- Charger won't reboot if car is in state B and OCPP or Payments is active.
Improved
- When car changes from state C to B, charge information will persist on screen.
Added
- Mobile initialization routine where apn is configured.
Improved
- Current state charge now reports errors.
Improved
- Added configuration property validation.
Fixed
- Direct method to obtain dynamic balancing information.
Fixed
- General dynamic balancing improvements.
Fixed
- OCPP improvements.
3.2.1
octobre 16, 2023
Added
- Improved balancing algorithm.
Fixed
- Changed remaining set_basic_unreported_config to set_basic_config.
3.2.0
octobre 6, 2023
Added
- Dynamic control implemented.
Improved
- Removed non-repetitive logger.
Updated
- Refactored config charge box. Removed BASIC_UNREPORTED and created whitelist of properties to report.
Fixed
- Fixed payment bug where a charge couldn't be started properly if charge was started with the hose unlocked.
Fixed
- Fix bug with power being zero, dynamic control failing when there are no connectors.
Added
- Fix dynamic control bug, powerbytram is not being updated.
Added
- Fixed bug where whitelist of reported items wasn't being applied and properties weren't being stored in database.
Updated
- Phase map is now not applied to installation meters.
Improved
- Changed access point interface to change apn, with manual mode or mobile operator mode.
3.1.8
septembre 29, 2023
Updated
- Force WIFI and bluetooth GPIO pins for compute module 4 to work.
3.1.7
septembre 29, 2023
Updated
- Force 4g GPIO pins for compute module 4 to work.
3.1.6
septembre 28, 2023
Improved
- When we detect that measurers aren't working, we send an unblock command in case there's a charge and the charger has lost power.
Improved
- Create section BASIC_UNREPORTED for properties that are used but we don't want to report.
Added
- Property log_level is now an unreported property.
Fixed
- When we don't receive petitions from chromium we now press enter and Ctrl+F5 if there's anything we need to accept.
Improved
- Locked value has persistance when measurers fail.
3.1.5
septembre 27, 2023
Fixed
- Mechanism so that when a network parameter has been changed, it waits for changes to take effect before rebooting.
Fixed
- Changing WIFI configuration with bluetooth now reboots the charge point.
3.1.4
septembre 26, 2023
Improved
- Fixed configuration file so that software works with compute module 3 and 4.
Improved
- Changed reboot logic. It will now reboot if there's a car connected but charge is not allowed.
Fixed
- Changed payments qr code.
Fixed
- We can change log level with property.
Added
- Fixed log file rotator.
3.1.3
septembre 18, 2023
Fixed
- Meter values fixed. We now send wh instead of kwh.
Added
- RemoteStartTransaction works regardless of LocalPreAuthorize value.
3.1.2
septembre 7, 2023
Fixed
- Fixed error where timezone wasn't set correctly so time appeared incorrectly.
Added
- Updated STM to version 1.2. It improves connector block.
Improved
- Fixed general network errors. Improved access point and wifi connectivity.
Fixed
- Fixed payment_max_mode timeout bug.
Added
- Pause is now reset when it goes back to state A.
Added
- Show measurer error as "Error 3" on connector. Behaviour is that connector is locked until it's fixed.
Added
- Set wire connected again.
3.1.1
septembre 4, 2023
Improved
- Change timezone automatically.
Added
- Fixed Carlo Gavazzi Measurer.
Added
- Fixed power, it was shown in W and is now in Kw.
Removed
- Fixed removal of grey notification update.
Fixed
- Added triphasic phoenix contact measurer.
3.1.0
septembre 1, 2023
Added
- Patch to remove grey notifications at startup.
Added
- Whenever there's an action that provokes rebooting, it will show on screen that it's going to reboot and the cause.
Added
- Screen orientation can now be set and depending on parameter.
Improved
- Measurer refactoring.
Fixed
- Limited number of messages we can send to iothub.
Improved
- Imei obtention improved.
Added
- Added error message 1 and 2.
Improved
- Initial version of bluetooth finished: Obtain properties change basic properties, program charge, reboot, add rfid and change wifi.
Removed
- Removed wire_connected event telemetry.
Fixed
- In OCPP, fixed sending of meter values. Now sending in wh and not in kwh.
Fixed
- Boot patch so that GPIO pin initialization takes less time.
Added
- Bluetooth patch so that bluetooth initialization takes less time.
Added
- Created patch system. System level changes will be applied with this system.
Fixed
- Monophasic measurer Eastron SDM220 implemented.
Updated
- RFID can now function with payments. If RFID is enabled with payments, registered cards will be able to start charges. If RFID is disabled with payments, no card will be able to start a charge.
Fixed
- Improved robustness on all direct methods.
Fixed
- Fixed bug where it didn't reconnect properly to iothub when it disconnected.
Improved
- Boot improvements. "Page not found" isn't shown anymore. Boot is faster. There's a gif indicating that system is starting.
Fixed
- Created direct method to put a QR code on the OCPP screen.
Improved
- Obsolete properties are now deleted automatically so that they aren't reported.
3.0.9
juillet 5, 2023
Fixed
- Fixed ocpp meter value Energy.Active.Import, when measurer is flipped.
3.0.8
juillet 4, 2023
Fixed
- Fixed local load balancing when one connector was charging. Now when one connector is charging, it will charge at the set intensity.
Added
- Wire connected is now a telemetry event instead of a reported property so that the server can use the timestamp.
Updated
- Fixed error where e-Charger couldn't obtain dns when connected with WIFI.
3.0.7
juin 28, 2023
Fixed
- Fixed ocpp Remote Start Transaction and Remote Stop Transaction.
3.0.6
juin 26, 2023
Fixed
- Fixed error that ocurred in ocpp where it didn't clear properly the idtag when finishing a transaction.
3.0.5
juin 22, 2023
Updated
- Changed access point ip from 192.168.44.1 to 192.168.4.1
Fixed
- Fixed websocket connection issue with nuitka compilation.
Improved
- Programmed charge now works with OCPP, Payments or RFID.
Updated
- We now report the charger's state instead of the requested vehicle state.
Updated
- Changed access point master password.
3.0.4
juin 19, 2023
Improved
- OCPP.
Improved
- Improved update logs.
3.0.3
juin 8, 2023
Added
- Moved Version from center to right side and added V. before the version number.
3.0.2
juin 7, 2023
Improved
- STM will now detect SPI bus communication errors and will automatically reset.
3.0.1
juin 5, 2023
Improved
- Screen is now monitored so that it refreshes in the case that no requests have been made after 15 seconds.
Fixed
- Fixed bug where connector stopped working properly when sending intensity 0.
Improved
- QA diagnostic is obtained through access point.
Improved
- Reduced access point available time to 10 minutes.
Added
- There's a master username and password for installers.
Added
- Screen now shows when RFID card is registered.
Added
- Top bar now shows version and if access point is accessible.
Added
- Access point interface now has, local load balancing, rfid card registering and log download.
Added
- Check that compute module and board have been created properly.
3.0.0
mai 4, 2023
Pole Pro initial version
Added
- Initial Version
Denka
0.14.
janvier 20, 2026
Added
Affichage de l’état de charge dans le panneau installateur.
Improved
Recharge intelligente : curseur de puissance dans le panneau installateur.
Improved
Améliorations générales de la stabilité et de la fiabilité du système.
Improved
Améliorations globales du fonctionnement et de la stabilité.
Fixed
Corrections du comportement de la recharge intelligente OCPP.
Fixed
Correction de problèmes liés à la gestion et à la récupération des alarmes système.
0.14.1
décembre 18, 2025
Added
Indicateur de dépassement du Target SoC.
Added
Arrêt de la charge à un SoC spécifique.
Added
Rapport sur l’état du bouton d’urgence.
Added
Élément slider dans le serveur web.
Added
Rapport du SoC du véhicule et protocole vers le backend.
Added
La méthode directe currentcharge renvoie désormais le temps restant pour le SoC bulk et complet.
Added
Méthode directe pour redémarrer le service autossh.
Added
Configuration du mode IP (publique/privée) pour la connexion 4G.
Improved
Chargement intelligent OCPP.
Improved
Améliorations des performances.
Improved
Démarrage du module Wi-Fi.
Improved
Migration du serveur HTTP.
Fixed
Correction des erreurs de configuration au démarrage.
Fixed
Correction des erreurs du chargement intelligent OCPP.
Fixed
Correction des erreurs du serveur web et de la communication avec le matériel.
0.13.4
octobre 20, 2025
Added
Option pour désactiver le Wi-Fi dans le panneau d’installation.
Improved
Amélioration des performances de transmission des paramètres DC.
Fixed
Résolution du blocage SPI.
Fixed
Bug dans TimerHandler avec n_connectors.
0.11.3
octobre 7, 2025
Added
Rapport des tags.
Added
Intégration des modifications des propriétés reportées.
Added
Ajustement de la calibration RFID depuis le panneau d’installation.
Added
Intégration de la propriété observée de la bibliothèque partagée.
Added
Arrêt de la charge à un SoC spécifique.
Added
Liste blanche de charge basée sur MAC.
Fixed
Bug dans TimerHandler avec n_connectors.
Fixed
Hotfix pour l’augmentation des messages envoyés.
Screen
2.20
janvier 23, 2024
Fixed
- Fixed rfid bug in ocpp.
2.19
janvier 19, 2024
Fixed
- Fixed rfid card issue in stop transactions.
2.18
octobre 25, 2023
Fixed
- Fixed OCPP error where transaction wasn't started when states passed from C to B to C.
2.17
septembre 29, 2023
Fixed
- CB Master: Improved robustness of rfid charge track so that if one connector is fully charged and a different car wants to charge in the other connector it can now charge.
2.16
septembre 21, 2023
Fixed
- CB Master: Fixed bug that wouldn't allow two connectors to charge with payment + RFID.
2.15
août 18, 2023
Added
- CB Master/CB N: Rfid cards can start a charge in payment mode if rfid is enabled.
2.14
août 14, 2023
Fixed
- CB Master: We check if measurer is flipped by connector instead of globally.
2.13
juillet 31, 2023
Fixed
- CB Master: We check if measurer is flipped while configuring meter values so that they are sent correctly.
2.12
juillet 25, 2023
Fixed
- CB N: Fixed cloud iot problem.
Fixed
- CB Master: Configuration file is restored correctly in the case it's lost. This provoked the page not found error.
Fixed
- CB Master: Fixed bug where a connector couldn't start a charge when there's a car on the other connector with state B.
Added
- CB Master: Implemented callable meter values.
2.11
mars 9, 2023
Fixed
- CB Master: Meter power bug fix.
2.10
février 23, 2023
Improved
- CB N: General payment improvements.
Added
- CB N: We now report property wire_connected so that in the payment method the parking can be charged.
Improved
- CB N: In payment method, when you move from status c to b, it does not allow you to reload again until you start a new transaction.
Added
- CB N: Car state management D and E.
Improved
- CB N: Improved restart logic when any OCPP configuration is changed.
Fixed
- CB Master: Fixed payment bug that sent the upload permission to the wrong connector.
Fixed
- CB Master: Fixed bug that when two cars were connected and the B connector was in B status, when the card was swiped, the B was set to charge when the A should be set.
Improved
- CB Master: General meter improvements.
Fixed
- CB Master: Total energy bug arrangement from version using imported and exported energy.
Improved
- Pole: Filter to reduce number of logs.
2.9
décembre 16, 2022
Improved
- CB Master: Improved OCPP smart charging balancing logic.
Improved
- CB Master: Meter restructuring.
Improved
- OCPP: General improvements in Smart Charging and Tx Profile implemented.
Improved
- OCPP: Changes due to restructuring of the meter.
Improved
- OCPP: Restructuring of smart charging. Obtain composite timetable with several profiles.
2.8
novembre 14, 2022
Added
- CB N: Added diagnostic method.
Improved
- CB Master: Increased RFID SPI communication speed and lowered RFID gain if noise is detected.
Added
- CB Master: Integrated SACI meter and changes so that the serial configuration per connector is not linked.
Improved
- CB Master: Code refactoring
2.7
octobre 18, 2022
Fixed
- CB Master: Convert to positive the negative values read by Phoenix Contact measurer.
Added
- CB Master: We delete BrowserMetrics from chromium that it sometimes fills up and eats up all the memory.
Improved
- CB Master: Refactored serial and made some changes that improve flexibility. We can now have one connector with one type of measurer and the other connector with a different type of measurer.
Fixed
- CB Master: Adjusted the precision of Phoenix Contact monophasic measurers.
Fixed
- CB N: Fixed bug provoked by changing local load balancing from v2c service.
Fixed
- OCPP: Change availability of Persistant Data handler is now async so that we can call it without blocking the execution of the ServerController.
Added
- OCPP: Starting point for get composite schedule done.
Added
- OCPP: Relative profiles are handled but only for Smart Charge profiles where connector id is bigger than 0.
Fixed
- OCPP: Fixed clear charging profiles.
Added
- OCPP: Smart Charging Tx Profiles are now accepted.
Added
- OCPP: In websocket connection, added "compression=None" since without it it doesn't work on latest Steve version.
Improved
- OCPP: Added next time check mechanism for Smart Charging so we check the next time any limit changes instead of every 30 seconds.
Improved
- OCPP: General Smart Charge improvements.
Fixed
- OCPP: We handle decimal numbers on the Smart Charge profile's limit.
2.6
octobre 4, 2022
Fixed
- OCPP, CB N and CB Master: Fixed bug when locked was modified and ocpp was activated but chargepoint isn't connected to any central system.
Fixed
- CB Master: Fixed bug when OCPP charge is started where if connector 1 was charging, connector 0 couldn't start a charge.
Added
- CB Master: Function to receive Smart Charge current and OCPP balancing.
Fixed
- CB Master: Prevent crash in the case that .versions folder doesn't exist.
Fixed
- CB Master: Register cards are now added to card cache.
Added
- CB N: Changes due to Smart Charging
Added
- OCPP: Smart Charging starting point fininshed.
Added
- OCPP: Smart Charging configuration keys are handled.
Added
- OCPP: Smart Charging profiles can be added and will be validated and can also be deleted.
2.5
septembre 23, 2022
OCPP library version upgraded from 0.12 to 0.15.
Improved
- CB Master: Improvements in update process.
Improved
- CB Master: Changes so that screen indicates when a non registered RFID card is passed.
Improved
- CB N: Improvements in update process.
Improved
- OCPP: GetConfigurationKeys now returns unknown keys and we handle SupportedFileTransferProtocols key.
Added
- Pole: Screen now shows when user passes a non registered RFID card.
Improved
- Pole: Romanian identifier moved to position 6 to maintain order language with Trydan.
2.4
septembre 20, 2022
Removed
- CB Master: We don't send wifi_info in report anymore and we have removed functions related to wifi_info.
Improved
- CB Master: RFID reader improvements. The charger reads continuously instead of intermittently, reduced read errors and antenna gain is now dynamic.
Improved
- CB Master: We store RFID cards in cache.
Improved
- CB N: RFID reader improvements. Case where two connectors are plugged in and a card is passed.
Removed
- CB N: We don't send wifi_info in report anymore.
Improved
- CB N: New communication method so that CB master can obtain RFID cards.
2.3
septembre 13, 2022
Improved
- CB Master: Improvement in connect/disconnect logic. Disconnection is less rigid and we increased network check from 5 seconds to 15 seconds.
Fixed
- CB Master: CWe fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
Improved
- CB Master: Increased RFID reader antenna gain.
Added
- CB Master: Changes in access point page to configure static IP.
Improved
- CB N: When charger reconnects, it will only send report if a property has changed.
Improved
- CB N: Properties are now only reported when they have changed from previous value.
Fixed
- CB N: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
Added
- CB N: Static IP configuration through access point.
Fixed
- OCPP: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
2.2
septembre 7, 2022
Fixed
- CB Master: Fixed energy by hour bug.
Improved
- CB Master: Safeguard so that it doesn't fail when there's a missing network card and we try to obtain data usage.
Updated
- CB Master: Removed range validation from measurer for Carlo Gavazzi and Phoenix Contact measurers.
Improved
- OCPP: Removed range validation from measurer.
Added
- Pole: Added Romanian language.
2.1
septembre 6, 2022
Improved
- CB N: We only change repository hash if it has changed.
Improved
- CB N: We show in log if i2c reconnects.
2.0
août 29, 2022
Improved
- CB Master: Adjustment in measurer so that it can handle int32 represented as uint.
Added
- CB Master: Changes to reduce calls to has_internet_connection to consume less data.
Added
- CB Master: Chargebox Cache now stores state of connectivity with V2C service to show it on the screen.
Improved
- CB N: Log improvements to not show get_has_internet_connection y and reduce error messages generated when i2c is not working.
Improved
- CB N: Changes to reduce calls to has_internet_connection to consume less data.
Added
- CB N: Chargebox Cache now stores state of connectivity with V2C service.
Fixed
- CB N: Seconds of timeout now return 0 instead of None if not set.
Improved
- OCPP: We log exception names since sometimes exception errors return empty string.
Improved
- OCPP: We capture error if there's an error when sending heartbeat.
Improved
- OCPP: We change client controller so that it's the same as CB N and CB Master.
Added
- Pole: The screen now shows a cloud icon to indicate connectivity to our cloud.
1.9.1
août 25, 2022
Fixed
- CB Master: Fixed error where RFID stops charge while the other connector is enabled.
Fixed
- CB Master: Fixed error where RFID card is passed and both connectors have a car plugged in.
Added
- CB Master: Network usage will be shown in log when a reboot is performed.
Improved
- CB Master: Master now sends the balanced intensity when it changes.
Improved
- CB N: Changed order of what happens when configuration is changed. We first update the value, then we report the changes to Azure and finally we set the cache.
Fixed
- CB N: Fixed bug where changing local load balancing set both connector intensities to 16.
Improved
- CB N: CB Master now sends balanced intensity instead of CB N probing for change.
1.9
août 22, 2022
Added
- CB Master: Network usage is now monitored.
Improved
- CB Master: Change in log system to not show repeated logs.
Improved
- CB Master: Shared properties are now set in the other connector if they are different on startup.
Improved
- CB Master: Completely decoupled OCPP from CB N and get_ocpp_config function fixed.
Improved
- CB Master: Network state is now sent when changed instead of being probed every 30 seconds.
Improved
- CB N: General improvements of communication between modules and cache.
Improved
- CB N: Improved stability related with missing configuration.
Improved
- CB N: Change in log system to not show repeated logs.
Improved
- CB N: Fixed problem where Chargebox loop would destroy RFID state.
Improved
- CB N: Fixed OCPP ConnectionTimeout.
Improved
- CB N: Completely decoupled OCPP from CB N
Improved
- CB N: Network state is now sent when changed instead of being probed every 30 seconds.
Improved
- CB N: We only change repository hash if it's different than the current one.
Improved
- CB N: Updating checks if charger is updated or not and only changes version after it has been updated.
Improved
- CB N: General improvements of communication between modules.
Improved
- OCPP: Improved Client Controller traceability.
1.8
août 9, 2022
Improved
- CB Master: Created singletons are now thread safe.
Improved
- CB Master: Created Cache to decrease the number of requests and communication between modules.
Improved
- CB Master: Fixed network reset problem.
Improved
- CB Master: Changes so that Pole can receive all the information it needs in one call.
Improved
- CB Master: Changes dues to how the measures are now sent.
Improved
- CB Master: General access point improvements.
Improved
- CB Master: Improvements due to changes in module communication.
Improved
- CB N: Created singletons are now thread safe.
Improved
- CB N: Server Controller is now executed sooner due to being fundamental in correct functioning.
Improved
- CB N: Changes to take into account CB Master's cache
Improved
- CB N: Changed way we obtain measures to perform less requests with Client Controller.
Improved
- CB N: Improvements due to changes in module communication.
Improved
- OCPP: Created singletons are now thread safe.
Improved
- OCPP: Completely decoupled from CB N and now only communicates with CB Master.
Improved
- OCPP: Simplified communication between modules.
Improved
- OCPP: Improvements due to changes in module communication.
Improved
- Pole: Created singletons are now thread safe.
Improved
- Pole: Completely decoupled CB N and we obtain all information needed in one call to CB Master.
Improved
- Pole: Improvements due to changes in module communication.
1.7
juillet 20, 2022
Improved
- CB Master: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
Improved
- CB Master: The charger now limits the number of messages that appear in the case that there's a range validation fail of a measure.
Improved
- CB N: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
Improved
- CB N: Restart Server Controller mechanism.
Fixed
- OCPP: If there's an error handling a request, we won't add it to the offline queue.
Improved
- OCPP: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
Fixed
- OCPP: Include thread and sys libraries.
Improved
- OCPP: Restart async Server Controller mechanism.
Improved
- Pole: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
1.6.0
juillet 13, 2022
Improved
- OCPP: When rebooting, we check module communication server.
Improved
- CB N: When rebooting, we check module communication server.
Improved
- CB N: Decoupled concept of connector id and measurer address.
Improved
- CB Master: When rebooting, we check module communication server.
Improved
- CB Master: Decoupled concept of connector id and measurer address.
Improved
- CB Master: Fixed error in Phoenix Contact measurer.
Improved
- Pole: ZMQ integrated to improve communication.
1.5.6
juillet 1, 2022
Improved
- Pole: Improvement to let the user know when to connect the vehicle.
Improved
- Pole: Screen now reflects if charger has only one connector.
Improved
- CB Master: Changed SSID format so that it's the same as Trydan's format.
Added
- CB Master: Phoenix Contact measurer is now integrated.
1.5.5
juin 22, 2022
Fixed
- OCPP: Fixed problem with repeated logs.
Updated
- OCPP: AuthorizeRemoteTxRequests is now a read and write configuration key.
Improved
- OCPP: Fixed case when central station id is an integer.
Improved
- OCPP: Added measurer range validation.
Fixed
- CB Master: Fixed problem with repeated logs.
Improved
- CB Master: Added measurer range validation.
Fixed
- CB N: Fixed problem with repeated logs.
1.5.4
juin 7, 2022
Improved
- CB Master: Access point can now change configuration of second connector if it has it.
Improved
- CB N: Handled special case of change intensity.
1.5.3
juin 1, 2022
Added
- CB N: OCPP Status Notification transitions fixed when there's an unavailable connector.
Improved
- CB N: If OCPP is on, we disable payment mode.
Added
- CB Master: Access point logic fininshed.
Added
- OCPP: Data validation when configuration is changed.
Added
- OCPP: Charger can now handle multiple transactions offline.
1.5.2
mai 20, 2022
Improved
- CB Master: Increased time before rebooting to improve stability.
Improved
- OCPP: Reset function improved. Corresponding Status Notification is sent.
1.5.1
mai 17, 2022
Improved
- CB N: General stability improvements.
Improved
- CB N: Changed payment method approach.
Improved
- CB Master: Changed payment method approach.
Improved
- CB Master: Improved robustness in the case the access point software is not installed.
Added
- Pole: We show device id on the screen.
Improved
- Pole: Improvements due to payment method.
1.5.0
mai 13, 2022
Added
- OCPP: Data transfer method to obtain logs.
Added
- OCPP: Change availability validates connector.
Improved
- CB Master: Changed compressed file formats from gzip to gz
Improved
- CB Master: Force backup when restarting.
Added
- CB Master: Finished Access point.
1.4.4
mai 9, 2022
Added
- CB N: Added set internal config function.
Added
- CB N: Allow to change intensity, when i2c is failing.
Fixed
- CB Master: Fixed OCPP measurer error that ocurred when all selected measures in Meter Values returned 0.
Added
- CB Master: Implemented most of the access point server functionalities.
1.4.3
mai 6, 2022
Added
- CB Master: Initial version of the access point server.
1.4.2
mai 4, 2022
Fixed
- CB Master: If payment mode is active, charger won't allow to charge with RFID card.
Improved
- CB Master: Changes to improve Pole software.
Improved
- CB N: Changes to improve Pole software.
Improved
- Pole: Changes to simplify view logic.
Fixed
- Pole: Removed sourceMappingUrl to prevent 404 error when there's no internet.
1.4.1
avril 28, 2022
Fixed
- CB N: Payment mode changed since payload format for server has changed.
1.4.0
avril 26, 2022
Added
- Pole: Changes in screen software that reflects payment mode, blocking connectors and OCPP.
1.3.24
avril 21, 2022
Fixed
OCPP: Fixed Unlock and Reset bug.
Fixed
OCPP: Charger won't send Authorize if passed RFID card is already used in a transaction.
1.3.23
avril 19, 2022
Improved
OCPP: We store RFID cards in lower caps to improve robustness.
1.3.22
avril 13, 2022
Improved
- OCPP: Improved robustness of RFID cards stored in the Local Authorization list.
Added
- OCPP: Authorization list works when there's no conection to the central system.
1.3.21
avril 11, 2022
Added
- OCPP: We handle key AllowOfflineTxForUnknownId.
Improved
- OCPP: Improved Local Authorization logic.
1.3.20
avril 7, 2022
Fixed
- OCPP: Fixed bugs from first integration test with EVIO.
Fixed
- CB Master: Fixed wifilist sending format.
1.3.19
avril 6, 2022
Added
- CB Master: We report wifi_info and wifilist by direct method or bluetooth.
Added
- CB N: We report information regarding wifi_info. Direct method to ask for the SSIDs the raspberry pi detects.
1.3.18
avril 5, 2022
Improved
- OCPP: Improved authorization cache handler.
1.3.17
avril 4, 2022
Improved
- OCPP: Improved request queue when there is no conection to central system.
Improved
- OCPP: Improved handling of measurer values.
1.3.16
avril 1, 2022
Added
- OCPP: Unlock connector implemented.
Improved
- OCPP: Improved handling of configuration keys.
1.3.15
mars 31, 2022
Improved
- CB N: When the charger is initialized payment method will be off by default.
Updated
- CB N: Payment mode with duration and timers.
1.3.14
mars 30, 2022
Added
- CB Master: Function to obtain CPU temperature. It's a possible OCPP Meter Value.
Improved
- OCPP: Improved MeterValues handler.
1.3.13
mars 28, 2022
Added
- OCPP: Finished Local Authorization List profile.
1.3.12
mars 25, 2022
Improved
- OCPP: Log Improvements.
1.3.11
mars 24, 2022
Fixed
- OCPP: Fixed bug that wouldn't send Authorize Request when passing the RFID card.
1.3.10
mars 23, 2022
Added
- OCPP: Offline queue implemented for Start Transaction.
Added
- OCPP: Basic implementation of OCPP profiles: FirmwareManagement, LocalAuthListManagement, Reservation and SmartCharging.
1.3.9
mars 18, 2022
Improved
- CB Master: Fixed RFID card reading with Wiegand reader for cards that have a 0 on the left side. Example of cards that failed: 32:0a:2c:23, 41:00:32:12.
1.3.8
mars 16, 2022
Updated
- OCPP: Availability isn't managed by OCPP anymore. It is handled exclusively by property locked.
Improved
- OCPP: Boot Notification now send the charger model correctly.
1.3.7
mars 15, 2022
Improved
- CB N: If charger is blocked, led blinks won't be sent.
1.3.6
mars 15, 2022
Added
- CB N: Payment Mode finished with start and stop.
1.3.5
mars 14, 2022
Improved
- OCPP: Clear Cache can only be performed when all connectors are in the OCPP state Available.
1.3.4
mars 14, 2022
Improved
- CB N: When property locked is changed, OCPP availability is also changed.
Improved
- OCPP: Changes so that availability can be changed from CB N.
1.3.3
mars 10, 2022
Added
- CB N: If OCPP is active, it reports Status Notification with its corresponding state.
Improved
- CB Master: OCPP module can now ask for Status Notification.
Updated
- OCPP: The charger the different possible OCPP states in the Status Notification.
1.3.2
mars 4, 2022
Improved
- OCPP: We can now set configuration parameters for safeguard.
1.3.1
mars 4, 2022
Improved
- OCPP: Change availability is now completely functional. It changes to inoperative during a charge and availability changes the locked value.
1.3.0
mars 3, 2022
Fixed
- OCPP: Changed way we obtain measurer data for OCPP.
1.2.0
mars 2, 2022
Fixed
- OCPP: Temporary fix for Place to plug since OCPP library can't handle unknown keys.
1.1.0
mars 1, 2022
Fixed
- OCPP: Fixed _available_connectors error.
1.0.0
mars 1, 2022
Initial Version
Added
- OCPP.
Added
- Screen.
Added
- Pole.
Added
- CB Master.
Added
- CB N.
V2C Cloud Mobile
3.1.2
mai 28, 2026
Added
- Lock on the intensity slider to prevent accidental presses while moving.
Updated
- Validation of the length of the RFID and eKeys (at least 3 characters).
Added
- Battery discharge management notice for Ingeteam in their external application.
Fixed
- A bug was fixed that displayed the message "Avoid battery drain."
Added
- The administrator can see if the charger is being managed by an installer. Other users can see who the administrator is.
Fixed
- A bug was fixed when saving the configuration with the Goodwe inverter.
Improved
- Improvement on all Oasys screens
Updated
- Ingeteam and EMMA have been removed from the list of compatible investors for battery discharge.
Added
- New label in capacity data.
Fixed
- An error has been fixed when running the main method in a loop even when exiting the screen.
Added
- Detailed explanations have been added in all battery fields.
Fixed
- The power limit issue in Denka has been resolved (hidden, but completed).
Fixed
- The intensity in payments on screen has been permanently hidden.
Added
- Update to version 2.5.0 to include support for battery discharge.
Added
- Caution alerts have been added to warn the user to be careful when pressing certain sensitive functions.
Fixed
- A potential security vulnerability has been resolved.
Improved
- Improvements in the app (v2c): The energy rate has been added to Oasys.
Added
- The management of the electrical grid has been added to the Oasys configuration.
3.1.0
mai 12, 2026
Added
- OCPP notice managed by an external operator when activating dynamic control.
Fixed
- Fixed error in the GIF without fv.
Added
- It is indicated that there is a charging in progress in the statistics.
Added
- Now the names of RFID cards appear in the statistics.
Updated
- Allow editors to modify the energy rate.
Improved
- Greater robustness in the firmware update visualization (The update option will only appear if the current version is strictly lower than the latest stable version in production).
Added
- Main battery screens finished and with real data.
Added
- Added checkbox to prevent battery discharge starting from version 2.4.7 for some inverters.
3.0.9
avril 28, 2026
Added
- Pagination and character limit added for RFID codes and eKey in Trydan.
Added
- Separation of Azurro and Sofar Solar inverters.
Added
- Prevention of adding overly long codes in RFID or eKeys and improvement of user experience.
Added
- New Azurro inverter.
Added
- Improvement of the fluidity in the map menus.
Added
- Increase the size of the modals to improve data visualization.
Added
- Improved new design of statistics.
Added
- Added new Huawei EMMA meter.
Added
- Change of inverter type name to Sunny SMA.
Added
- Vehicle license plate added.
Added
- Added the type of photovoltaic used from your charging profiles at each moment in the GIF.
Added
- Pagination completed for RFID in Denka and Pole Pro
Added
- New types of Fronius limited to versions higher than 2.4.2
Fixed
- Corrected the autocharge status check (it shouldn't be performed in that case).
Fixed
- Fixed error in electric car data.
Fixed
- Update of the token endpoint throughout the app.
Fixed
- Fixed error on the options screen with MAC addresses in Poles.
Fixed
- Improved compatibility with large screen devices.
Fixed
- Safe-area adjustments in iOS.
Fixed
- Fixed end-to-end issue on Android 15.
Fixed
- Update of obsolete end-to-end APIs.
Fixed
- Added safe areas to avoid overlaps with system bars.
Fixed
- Critical security vulnerability in Android fixed.
Fixed
- Hidden charging target if you do not have the correct version (2.4.3)
Fixed
- Fixed bug when trying to update firmware via local wifi.
Improved
- Improvement in the visualization of electric vehicle details.
Improved
- Improvement in translations to Italian.
Improved
- General improvement of translations.
Improved
- Usability improvements and repositioning of buttons in EcoCharging
Improved
- Improvement in the data sampling of Payments
3.0.8
mars 17, 2026
Improved
- Acceleration of connection via Bluetooth.
Added
- Obtaining statistics via Bluetooth asynchronously to avoid slowing down navigation and make it more visual.
Improved
- Improvement in the BLE pairing design.
Improved
- Refactoring
Updated
- Change in the location of the V2C Business Panel, now in the main settings.
Removed
- Hidden slave update
Added
- Added information on charging costs for users with photovoltaics.
Fixed
- Fixed bug when configuring V2C Business Panel.
Fixed
- Fixed bug in the charging target checkbox.
Improved
- Optimization of Bluetooth connectivity on iOS.
Fixed
- Fixed bug on the rfid/eKeys screen for ALVA.
Improved
- Improvement of translations by context in all languages.
Fixed
- Fixed the overlap bug of the map menus with the notch on iPhones.
Added
- Change of Mapbox token for map search.
3.0.7
mars 3, 2026
Added
- Allow and select desired charging by kWh in Trydan.
Added
- Widget completed and functional on Android and iOS.
Added
- Added AI chatBot for frequently asked questions.
Added
- Explanation and notice for Linky meter.
Added
- New protocols for Goodwe inverter.
Improved
- Better UX design for classic scheduled charging.
Improved
- Improvement in data transmission and dynamic control alerts.
Improved
- Refactoring of part of the code.
Fixed
- The statistics reference the start date to appear within a time interval.
Fixed
- Fixed bug when entering an empty SSID in Poles and on iOS.
Improved
- Improvement of some incorrect labels in all languages.
Improved
- Improvement by displaying the emergency button pressed alert on Denkas.
Added
- New links for the new "Informative Videos."
Added
- New screen to pair chargers via Bluetooth proximity.
Improved
- Improvement in displaying more specific errors when sharing charger.
Added
- New screen to set the time zone.
Added
- Added Alva to the lineup of models
Updated
- Library updates in iOS.
Updated
- New design to add information about your electric vehicle
Added
- New option to link your e-Charger with a company.
Fixed
- German translations corrected.
Fixed
- Fixed the bug on the map in iPhones.
Added
- Two new subtypes for the Fronius inverter.
Fixed
- Fixed bug in cost display in statistics.
Added
- New rate for France: Tempo edf
3.0.6
janvier 21, 2026
Improved
- Improvement of the charging skeleton on the main screen
Improved
- Better explanation of the intensity per phase
Added
- Indicate whether Pole or Denka have TPV activated or not.
Updated
- Library update
Improved
- Improvement of translations in Italian - Improvement of translations in Italian
Fixed
- Fixed a bug when updating ecoCharging with a specific time.
Updated
- Updated Firebase library for enhanced security.
Improved
- Orientation restriction removed for greater compatibility with some Tablets.
Added
- Added emergency button activated warning in Denka.
Added
- Autocharge Function: List of authorized vehicles for Denka.
Added
- New flow in the photovoltaic scheme.
Updated
- Correct order in the properties of the static IP configuration.
Added
- Share charger directly via email.
Added
- Improvement in the logs for manually uploading statistics.
3.0.5
décembre 12, 2025
Updated
- Changes in the type of Solis inverter
Updated
- Change in the statistics sample, I take endCharge into account as the server.
Improved
- More space in the bottom menu for some devices
Updated
- Change in server calls, without the trailing slash.
Updated
- Hidden wake-up mode
Updated
- Hidden type 'Common records' in DEYE inverter
Added
- Bluetooth statistics can be uploaded manually.
Updated
- GPS is not a mandatory requirement to download the App.
Added
- Added G2 type to the Goodwe inverter
Improved
- Improvement of the bottom menu view for users with very large font size
Added
- Added charging limitation on Denkas
Added
- Display of the car battery capacity in Denka.
Added
- Shows the remaining charging time in Denka
Updated
- It is no longer necessary to indicate the user's zone in the electric vehicle configuration.
Fixed
- Fixed bug when retrieving data in Special Options
Fixed
- Resolution of minor bugs
3.0.3
novembre 10, 2025
Fixed
- The bottom menu no longer overlaps with the information.
Added
- The font size adapts to the operating system and depends on the user.
Added
- Allow SIM card data to recharge without the e-Charger connected.
Added
- New warning messages in delicate functions
Improved
- Improvement of overall stability
Updated
- Change in property name to term_resistor
3.0.1
octobre 20, 2025
Added
- Stability with the new design and change in the initial screen
Fixed
- Fixed bug when modifying the power in the Denkas.
Fixed
- Greater error control on the map
Improved
- Total improvement of translations in Portuguese
Improved
- Total improvement of translations in French
Improved
- Partial improvement of translations in German
3.0.0
octobre 13, 2025
Added
- New app design
Added
- Phase map adapted for Trydan
Fixed
- Hide Modification Type Portugal
Added
- Allow slaves to change the maximum and minimum intensity
Fixed
- Corrected intensity limits on the main screen and redesigned/refactored the settings screen.
Added
- Access restriction to charging profiles for non-master chargers, and separation of intensity limits.
Fixed
- Corrected numeric input type in some fields where text could be entered.
Removed
- Removal of unused screens
Added
- Change and notice for DEYE inverter types
Added
- Added view of the BUS termination resistance in dynamic control
Added
- Improved data loading on the network screen
Added
- Local balancing Trydan, show the status of the BUS termination resistor.
Updated
- Refactoring of the main screens
Added
- Greater robustness in sending statistics via Bluetooth
Added
- New splash screen configured and optimized
Fixed
- Fixed bug when selecting charging profiles, it always started on "weekdays"
Fixed
- Fixed bug in the photovoltaic gif
Removed
- Removed the border from the cards
Added
- Improvement in app restart without completely closing it, new designs completed with customizable background screen.
Added
- New logic on the main screen of the device
Fixed
- Correction in the token update
Updated
- Send battery capacity as a number instead of a string.
Improved
- Design improvements and enhancements across all iPhone screens with Dynamic Island.
Added
- New data charging design on the main screen
Fixed
- Fixed bug when displaying firmware version
Improved
- Improvements in statistics visualization
Removed
- Removed unnecessary elements
Added
- Supplier filter completed
Updated
- Changed server Transaction calls to the new ones.
Fixed
- Fixed bug when changing the cache
Fixed
- Do not show the lock if the charger is not connected (Wi-Fi or Bluetooth) and fixed bug when displaying the power level.
Added
- Added skeletons (Modern data loading) on the main screens
Fixed
- Prevent screen lock due to Internet connection in statistics
Added
- New server calls, transaction grouping, and pagination
Added
- New server calls, listing and downloading invoices by type
Fixed
- Fixed bug when displaying statistics
Improved
- Improved the visualization of statistics over long time ranges.
Added
- Added a clock next to the time in statistics, changed € to the general currency symbol, and now there is a statistics list in general statistics.
Added
- New type in DEYE and added new Linky meter
Improved
- Improvement in the skeletons
Improved
- Inverters and meters sorted alphabetically
Improved
- EcoCharging savings price well placed and the possibility to resume in any state
Removed
- Removed the current limit per phase when the charger is single-phase.
Added
- App translated into Basque and refactored to facilitate the incorporation of new languages.
Fixed
- Fixed bug in dynamic control, undefined IP
Added
- New energy rates added
Added
- Added new screen to confirm free payments
Added
- Added another type for Goodwe inverter
Added
- Notice in the message to restart e-Charger
Added
- New rates correctly calculate your price on the charging screen.
Improved
- Improvements on the device's main screen
Improved
- Improvements in LetMeCharge
Fixed
- Minor bugs fixed
2.3.8
juin 10, 2025
Added
- Add RFID or eKeys manually to multiple chargers at the same time.
Improved
- Code refactoring for better maintenance
Improved
- Improvement of reconnection between main screens
Added
- New permissions and restrictions according to the e-Charger model and the user's role
Added
- Maximum and minimum power limit in Denka
Added
- Animation without chargers adapted to the new design
Added
- New dynamic control for Trydans with version higher than 2.3.0
Added
- Map added (It will be available very soon)
Added
- New design with bottom menu
2.3.5
mai 6, 2025
Fixed
Fixed bug in the creation of the EcoCharging plan.
Removed
Total removal of the load balancing App (Now included in the operation of dynamic control).
Updated
SDK update on iOS to enable publishing.
Fixed
Fixed font size on some screens.
Fixed
Fixed bug when selecting static control in the Pole Pro.
Fixed
Fixed bug when requesting location on Android 14.
Added
Ability to disable Payments via Bluetooth on Pole Pro.
2.3.4
avril 25, 2025
Added
Automatic Bluetooth connection with a single charger.
Improved
Enhanced Bluetooth calls for Pole Pro.
Improved
Greater robustness when obtaining statistics via Bluetooth.
Fixed
Fixed the PDF invoice download.
Fixed
Fixed white screen error when setting up the connection.
Fixed
Error fixed when updating via local wifi.
Fixed
Inconsistency fixed with OCPP: it appeared activated when it wasn't via Bluetooth.
Added
Serial number added to the Enphase inverter.
Added
Statistics chart added in EcoCharging.
Added
Refactoring of the application and a new way to display dynamic control according to the version and model of the e-Charger.
Added
Incorporation of the Italian language to Pole Pro.
Improved
Refactoring of server calls.
Added
Co-owners can edit their credit card.
Improved
Improvement of translations.
Improved
Greater robustness when changing a scheduled charge.
Improved
Improvement of speed at application startup.
Removed
Elimination of load balancing between sockets in Poles, now it is automatically balanced from the dynamic control.
Added
Do not allow configuring charging profiles on a device that is not a Master.
Improved
Improvements in the connection setup screen.
Fixed
Error fixed when displaying the cost in graphs with photovoltaic energy statistics.
2.3.2
janvier 28, 2025
Fixed
- Fixed bug when uploading statistics via Bluetooth.
Fixed
- Fixed bug when retrieving data from Shelly Pro in dynamic control.
Fixed
- Fixed bug when adding the first charging profile via Bluetooth.
Improved
- Avoid excessive calls on the main screen with multiple e-Chargers.
Updated
- Update the minimum intensity of the Denka to 1kW
Added
- In the list of extras, differentiate which one is the Master.
Improved
- Control errors when editing RFID cards or Bluetooth key fobs
Added
- Allow deleting e-Charger if the Cloud Dynamic Control is activated and you are not the Administrator.
Updated
- Library updates and optimization improvements
Updated
- Allow powers of more than 100kW in the charging profiles.
Fixed
- Fixed bug when downloading invoices on any mobile device.
Fixed
- Fixed white screen bug when adding a Pole
2.2.8
décembre 11, 2024
Added
- New feature, you can now update the firmware of the e-Charger and the meter via local wifi.
Added
- New feature, added 'Wake-up Mode'.
Added
- Disable notifications if logged out.
Improved
- Optimization improvement, increased speed.
Fixed
- Fixed bug when obtaining statistics via Bluetooth with photovoltaic discrimination.
Fixed
- Fixed bug when updating the report after changes are made to a property.
2.2.7
novembre 18, 2024
Added
Added EcoCharging
Added
Statistics indicate the cost of applying photovoltaics and also show the savings.
Added
Possibility to change the intensity of the LED
Added
To be able to enter another COM address for the DDSU666-H meter.
Added
Added types to Fronius inverter
Added
New Denka e-Charger added
Added
New rates added (Indexed and OMIE)
Added
New features of the e-Charger Denka added
Added
New inverters added
Added
EcoCharging notice activated
Updated
Version update to 2.2.7
Added
Added ecoCharging plan view
Fixed
Error fixed when displaying the battery charge in the gif.
Fixed
Fixed bug in the RFID screen that was hanging, loading infinitely.
Updated
Updated email verification submission form
Added
Integration of functions for Denka
Added
Now notifications are differentiated by type and can be selected according to the user's preference.
Added
Translations of all the new screens.
Fixed
Modified text in monthly invoices and resolved the default month in invoices.
Fixed
Corrected error if the server fails to request the MAC, and if the JSON fails when requesting the reported via Bluetooth.
Added
Some options disabled with cloud dynamic control activated.
Added
Warning message when changing OCPP settings.
Improved
Improved translations into French.
Added
Types added to the Deye inverter in dynamic control.
Updated
Changes in the texts for 4G and Ethernet.
Added
Added date filter to transactions.
Added
New Shelly Pro meter added to dynamic control.
2.2.6
avril 9, 2024
Fixed
- The issue with changing the time when editing hours in charging profiles has been resolved.
Added
- Notice to set up charging profiles if you don't have any configured.
Improved
- Improvements in translations
2.2.5
mars 11, 2024
Fixed
- Fixed bug that did not display scheduled time in Pole Pro.
Fixed
- Fixed bug with the time zone in charging profiles (Occurred mainly in Portugal)
Added
- Added new Trydan Pro model and all its features
Added
- Added the types to the Greenheiss inverter and the SAJ inverter.
Improved
- Improvement in translations
Added
- Added an ion-range in the power selection of the charging profiles.
Added
- New types of connectivity for Trydan Pro (4G and Ethernet)
Added
- e-Charger restart notice when configuring Wifi
Added
- Refresh of statistics for greater robustness
Updated
- RFID cards and e-Keys can be added, edited, and deleted without the need to activate them.
Added
- Extension of time to add an e-Key for greater reliability
Improved
- Improvement in user messages on e-Keys
2.2.4
janvier 8, 2024
Fixed
- Fixed bug sending MQTT username and password in dynamic control.
Updated
- New management of notifications by device instead of by account, and removal of them when unpairing.
Fixed
- Fixed bug when displaying statistics that started at 00:00.
Added
- Added new custom rate by days.
Added
- A new tutorial pop-up screen has been created for when it is necessary to explain something to the user in more detail.
Improved
- Improvement in the format of the dictionaries (Internal code).
Added
- Error control in the charging profiles to notify the user if something has not been saved correctly.
Added
- Added photovoltaic in the load profiles for Pole Pro.
Updated
- Change from localStorage to sessionStorage in the Bluetooth ID for greater connection robustness.
Added
- Improved Bluetooth location on some phones and we show an error if the Bluetooth connection fails.
Updated
- Change the name 'Medidor V2C 2.0' to 'V2C ControlBox'.
Added
- Added COM 1 and COM 11 types to the Huawei Chint meter in dynamic control.
Fixed
- Fixed bug when changing language, sometimes the save button did not appear.
Added
- Hidden the photovoltaic gif for the Pole Pro.
Added
- Available to add a free COM Address for Huawei inverter.
Added
- Added the ability to configure a static IP for Pole Pro.
Added
- Added new message in the gif when there is no photovoltaic production.
Added
- New translations added.
Added
- Added user information about configuring the static IP in Pole Pro.
Improved
- Improvement in saving charging profiles, as it is not possible to save charging profiles with more than 5 segments via Bluetooth.
Added
- Added 'car topic' to configure MQTT in dynamic control.
Fixed
- Fixed bug with Shelly type sending in dynamic control.
Improved
- Overall application performance improvement and code optimization.
2.2.3
novembre 13, 2023
Added
- Add, edit, and delete RFID cards via Bluetooth in Pole Pro.
Improved
- Faster charging from the offline configuration.
Updated
- Change from kW to W in battery discharge.
Fixed
- Fixed bug when refreshing without having chargers.
Updated
- Change 'Dynamic control settings' to 'Charging profiles'.
Added
- Share available charger in 'User Management'.
Fixed
- Fixed an error when going back with the mobile button on some screens.
Fixed
- Update the list of RFID cards or key fobs upon activation.
Removed
- Deleted Parking message in V2C Payments when Parking is free to avoid confusion.
Added
- The V2C Payments process opens in the same app for a more convenient payment process for the user. (It does not work if the user has MI Browser set as default on their mobile, but it works for Google Chrome and Safari).
Added
- Added user notification to resume charging if V2C Payments is activated.
Added
- New languages available in Trydan.
Added
- Dynamic power control and charging profiles available in Pole Pro.
Improved
- Significant improvement in the stability of Bluetooth key fobs, both via WiFi and Bluetooth.
Improved
- Improvement in the design of Special Options.
Improved
- Improvement in Bluetooth search and location on iOS.
Added
- Added Trydan compatibility with Enphase inverter.
Added
- Added Trydan compatibility with P1 meter.
Added
- Added Trydan compatibility with Modbus feeder meter.
Added
- Added new additional configurations for MQTT.
Added
- Differentiation of types for Solis inverter (With or Without batteries).
Added
- Added the Romanian language in Trydan.
Added
- Added phase map configuration in Pole Pro under Special Options.
Fixed
- Improvement of the invoice view in English.
Updated
- Name change, now the Bluetooth keychains are called e-Keys.
Added
- Implementation of DeadLetters for background user error logging.
Added
- Power segments with current limit for Pole Pro.
Fixed
- Do not allow deleting e-Charger if the user is offline.
Updated
- Increase in Bluetooth scanning time on the main screen.
Improved
- Improvement in some Bluetooth methods.
Added
- Added no meter option in the dynamic control of Pole Pro.
Improved
- UX improvement by changing the name of the e-Charger.
Added
- Important notices when modifying dynamic control to improve UX.
Fixed
- Allow enabling the charger from inside with the auto-lock activated.
Improved
- Improves Bluetooth stability in Pole Pro.
Added
- New screen, list of available slaves for Pole Pro when acting as Master.
2.2.1
août 7, 2023
Improved
- Improvement in connectivity and reception of Wi-Fi on the home screen.
Added
- Bluetooth and all its functions available for Pole Pro.
Added
- Added alternative meter to SolarEdge in Dynamic Control.
Updated
- Unify on a single screen the activation of RFID cards and their editing. (The same for Bluetooth key fobs)
Updated
- Change Huawei type for COM Direction.
Added
- Added confirmation before updating Firmware.
Fixed
- Fixed bug asking for Huawei type for any meter or inverter.
Updated
- Send to the main screen after restarting the e-Charger.
Fixed
- Fixed bug when displaying charging statistics made between 10:00 PM and 12:00 AM.
Fixed
- Fixed bug when entering an empty power segment name.
Added
- More and better translations.
Added
- Error control in Payments.
Fixed
- Fixed Payments bug with the free rate.
Fixed
- Fixed bug with the time zone in the statistics.
Added
- New Google Home image added.
Updated
- Change when we make a free transaction in Payments.
Updated
- Do not allow modifying Payments if you do not have Internet access.
Improved
- Offline configuration screen will load faster.
Fixed
- Fixed minor bugs.
2.2.0
juin 28, 2023
Added
- In Payments, the intensity at which the car will charge during the transaction will be displayed, and it will be the one set by the owner of the e-Charger.
Updated
- In the photovoltaic gif, the value will not be displayed if the data is 0 or null.
Added
- There is now a new type of photovoltaic in the power ranges, called 'No injection or isolated'.
Updated
- If the device language is Basque, the App will default to Spanish (previously it was set to English).
Improved
- Improvement in the retrieval and upload of statistics via Bluetooth.
Added
- The power segments are stored on the server and in the cache for proper functioning on any different device and in any situation. (With internet, without internet, with bluetooth, etc.)
Fixed
- Fixed the photovoltaic gif that was freezing on some IOS devices.
Added
- Added Bluetooth keychains for the Trydan.
Improved
- Improvement in the stability of some Bluetooth calls
Added
- Added informative messages for the user for a better user experience.
Added
- The token is only requested once every minute or when entering the application and is cached for faster speed (Previously, it was requested with each http call).
Added
- Added the ability to restart the e-Charger in 'Special options'.
Added
- Google Home is now available and the corresponding info has been added to the app.
Added
- More error control in some posts for greater transparency to the user.
Fixed
- Fixing some minor bugs.
Improved
- Improved the design of the Payments screens.
2.1.9
avril 19, 2023
Added
- Restart the App when it goes to the background for more than 30 seconds on iOS.
Updated
- Larger payment button without chargers.
Fixed
- Fixed push notifications on iOS.
Fixed
- Fixed the issue with Google login on iOS when sharing charger.
Fixed
- Fixed error with PVPC 2 format.
Updated
- Corrected new QR format.
Fixed
- Fixed error when modifying rates.
Improved
- Improved Bluetooth reconnection on the main screen in iOS.
Updated
- Ability to modify OCPP via Bluetooth in Trydan.
Added
- Added the IP to the WiFi information.
Updated
- Change in the design of the V2C Payments screen
Added
- Take into account the parking cost after charging at V2C Payments.
Added
- Explanation of static IP Shelly.
Improved
- Differentiated the option between sliding and clicking to lock the charger.
Fixed
- An error in the download of payment invoices has been fixed.
Added
- Real-time update of payment status on the main screen.
Improved
- Improved Bluetooth stability for certain calls that sometimes failed.
Added
- New inverters added.
Added
- Change in Shelly inverter rates.
2.1.8
février 13, 2023
Added
- Differentiation between inverters and smart meters (Smart meters)
Added
- New inverters added
Added
- New notification if you have successfully obtained the statistics via Bluetooth.
Improved
- Greater consistency in the sending and receiving of data via Bluetooth
Fixed
- Fixed the retrieval of statistics via Bluetooth.
Fixed
- Fixed bug with the photovoltaic gifs
Fixed
- Fixing the notifications
Added
- Now it is only required to use the location with Bluetooth enabled.
Added
- Take into account the batteries in the photovoltaic GIF.
Improved
- Do not allow the user to enter an empty RFID name and new translations.
V2C Cloud Portal
3.4.1
avril 14, 2026
Added
Download PDF of consumption certificate.
Added
New Sofar Solar inverter.
3.4.0
avril 1, 2026
Added
Autocharge for Denka.
Improved
Increase in code size on RFID cards.
Added
Select time zone, either manually or automatically.
Added
New Huawei Emma inverter.
Added
New Azzurro inverter.
3.3.2
février 13, 2026
Added
New option to link an e-Charger to a company.
Improved
New rates added.
3.3.1
janvier 8, 2026
Added
Button to generate payment URL without the e-Charger app in Payments.
Improved
New PDFs in Spanish and English in Payments.
Fixed
Charging power limit on Denka.
3.3.0
décembre 17, 2025
Added
Share chargers via email.
Improved
Selection of the auto-lock time for Trydan with version 2.3.25 or higher.
Added
Charging stops upon reaching the selected percentage for Denka models.
Added
TPV icon.
Added
Possibility to see more chargers on the main page.
Added
Calculator in Payments rates.
3.2.16
novembre 12, 2025
Added
Added tags when downloading "Charging Sessions"
Improved
Change in design when adding/modifying rates in Payments.
3.2.15
octobre 16, 2025
Updated
Update of the API info URL.
Fixed
Fixing errors in cloud installation.
3.2.14
octobre 13, 2025
Fixed
Fixing errors in RFID cards.
Improved
Filters are added in the "Number of chargers" section.
3.2.13
septembre 24, 2025
Added
New meter added: LINKY.
Added
Catalan language added.
Fixed
Bug fixes in the cloud power control.
3.2.12
septembre 15, 2025
Fixed
Fixing errors in power control profiles and in the meter list.
3.2.11
septembre 3, 2025
Updated
Improvement in RFID cards to manually support 14 characters.
Added
Added local power control configuration for Trydan/Trydan Pro.
3.2.10
août 9, 2025
Fixed
Bug fixes
3.2.9
juillet 8, 2025
Added
Phase map within the load profiles in Trydan.
Added
Filtering by status (online/offline) available for e-Chargers.
Improved
Visualization of the version of the e-Chargers on the main page.
3.2.8
juin 16, 2025
Improved
Grouping of types in Payments invoices.
3.2.7
juin 9, 2025
Added
Added visibility of the maximum power label when adding or modifying the charger design.
Fixed
Fix when filtering date range in Payments and dashboard.
3.2.6
mai 27, 2025
Improved
Increase in the maximum number of power control profiles.
Added
Added serial number to Enphase inverter
3.2.5
mai 5, 2025
Added
Option for an additional QR code in OCPP customization in Pole Pro.
Updated
Optional OCPP customization properties in Pole Pro.
Added
Italian language in Pole Pro.
3.2.4
mars 20, 2025
Added
Maximum intensity setting of the e-Charger in Pole Pro power control.
Improved
Creation of more intuitive power profiles.
3.2.3
mars 4, 2025
Added
Explanatory message about the function of community garages.
Updated
Greater reduction in the cloud power control zoom and the option to reset zoom changed to center the installation.
Improved
Improved visual aspect when creating power profiles for cloud power control.
3.2.2
février 13, 2025
Added
Share e-Chargers in community garages.
Improved
Ability to download statistics as a .xlsx file.
Fixed
Fixed various minor bugs.
3.2.1
février 6, 2025
Improved
Power or current limitation according to model when adding or editing e-Chargers in cloud power control.
Improved
Added a waiting indicator when saving an installation in cloud power control.
Updated
Modified text and color according to the status of the e-Charger in cloud power control.
Fixed
Images of e-Chargers in installation view in cloud power control.
3.2.0
janvier 27, 2025
Added
Ability to save installations as drafts in cloud power control.
Improved
Move and zoom in on an installation with the mouse wheel in cloud power control.
Added
Right-click menu in cloud power control.
Added
Select, copy, paste, duplicate, and delete multiple elements in cloud power control.
Updated
The upper power limit in the charging profiles has been modified.
Fixed
Fixed various minor bugs.
3.1.3
décembre 23, 2024
Improved
Performance improvement on the e-Chargers page and control panel
Updated
New way to display the details of the e-Chargers
Added
Information about OCPP in e-Chargers table
Added
Added Basque language
Fixed
Fixed various minor bugs.
3.1.2
décembre 10, 2024
Fixed
Fixed various minor bugs.
Added
Current and power limit of the circuit breakers shown in the functional view of the installation in cloud power control.
Improved
Improved interaction between elements during the creation or editing of an installation in cloud power control to avoid impossibilities.
Added
Right-click to delete an active item during the creation or editing of an installation in cloud power control.
Updated
V2C Payments transaction table sorted by date in descending order.
Added
The customer's email appears when downloading the transaction table from V2C Payments.
3.1.1
novembre 25, 2024
Fixed
Fixed errors in displaying the power control settings.
Updated
New validations when creating rates in V2C Payments.
Improved
Faster loading of the main page.
3.1.0
novembre 18, 2024
Added
New design of the portal v2c.cloud
2.2.0
mars 20, 2023
Added
- Automated translations to facilitate corrections and adding new translations in the future.
Fixed
- Fixing various bugs, updating and improving translations and user experience.
Improved
- Increased speed also on the main screen, and in the charging of the user's e-Chargers.
Updated
- All the inverters and meters available in the App have been added.
Improved
- Change the configuration to parallel for faster data loading.
2.1.0
décembre 12, 2022
Added
- Modify, delete, and functional view buttons in smart charging
Improved
- Acceleration of charging for e-Chargers
Added
- Added list of wifi networks
Fixed
- Fixed issue with the zoom of smart charging.
Added
- Added hamburger menu for better visualization of the canvas in smart charging.
Updated
- Change the navbar to black
Added
- Added shared user management
Added
- Added translations
Added
- User help added for CSV download
Added
- Romanian language added
Added
- Added the partner creation form
2.0.0
septembre 5, 2022
Added
- Added Smart charging
1.9.0
juin 15, 2022
Added
- Add RFID cards to multiple chargers at once and control token loss.
Updated
- Image tags also translated
Added
- Added invitations to customers
1.8.0
avril 11, 2022
Updated
- New design of the main screen
Fixed
- Fixed bug with colors changing upon logout.
Fixed
- Invoice issue, the correct one was not downloading.
Fixed
- Transactions are now resolved quickly, and there is a change in the format of the rates.
Fixed
- Resolved issue in payments with the tabs that were moving.
Added
- Added CSV with the customer's billing data from Payments.
Added
- Added to the main screen charger in payment mode or not with icon
Fixed
- Fixed 'Update software' and bug with charger statuses.
Added
- New translations added
1.7.0
février 8, 2022
Added
- OCPP table added
Added
- Added Payments option
Added
- Invoices added in the new tab and can be downloaded.
Improved
- Improvement in device charging
Improved
- Improvement of designs to make them responsive on all devices
Added
- Added flat rate or customized rate when adding a rate
1.6.0
décembre 27, 2021
Added
- Added ticket and fixed bug in the statistics
Updated
- Add charger in the same way as in the app
Fixed
- Bug fixes and design improvements
Updated
- We show fewer decimals in the tables.
Added
- Added plus charger
Updated
- Change the design of the side menu and some labels.
Updated
- Removed donuts and changed the design on the screen up button.
Fixed
- Fix letter design and login and main screen
1.4.0
août 23, 2021
Added
- Added device MAC in settings
Added
- Added software update in the configuration
Fixed
- Changing the rate is done correctly.
Added
- Cost calculation according to the rate
Fixed
- Controlled error changing WiFi without connection
Fixed
- Energy tariff calculation is done correctly.
1.3.0
juin 7, 2021
Fixed
- Dynamic power control is adjusted properly.
Fixed
- Global statistics are now updating correctly.
Fixed
- Fixed main screen hours
Updated
- Change of design if there is no connection
Added
- New design of the graphs
Improved
- Charging screen improves without connection
Fixed
- CSV data download in the correct format
Added
- You can now log in by pressing enter.
1.2.0
avril 12, 2021
Added
- V2C 2.0 meter added in dynamic control.
Added
- New, more specific errors highlighted for the user and installers.
Fixed
- Bug fixes when linking devices.
1.1.0
février 8, 2021
Added
- New, more attractive designs of some images.
Improved
- Improvements in website performance.
Fixed
- Functionality bugs fixed.
1.0
décembre 1, 2020
Added
- Website translated into Portuguese, German, and English depending on the language selected by the user.
Fixed
- Bug fixes.
Added
- Style improvements.
Added
- Creation of the V2C website.