Updates
Wat er verandert in elke firmwareversie van onze laadpalen en van het V2C Cloud-platform.
Nieuwste: Denka 1.1.0 · 12 nov 2026
Trydan en Trydan Pro
Huidige versie 2.5.2 · 47 versies sinds februari 2022
2.5.2Nieuwste versie
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- NieuwDirect query of OCPP status
- NieuwNew Solplanet/AISWEI Inverter
- NieuwNew Hoymiles Inverter
- NieuwBattery discharge control: GoodWe, SolarEdge
- NieuwHuawei inverters direct connection without Dongle
- NieuwUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- NieuwNew "Unlimited" Wake-up 5 mode available from the LCD
- NieuwImprovements in Bluetooth cybersecurity
- VerbeterdFixes in FV mode + Minimum power
- VerbeterdOCPP: duplicate BootNotifications are avoided
- VerbeterdSecurity menu lock during vehicle charging
- VerbeterdImprovements for Linky-LORA
Eerdere versies 46
-
- NieuwCompatibility with SigEnergy inverters
- NieuwNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- NieuwWiFi connection for Deye inverters via Elfin
- NieuwExpansion to 105 RFID cards
- NieuwPAP/CHAP authentication for 4G connection
- NieuwMore stable OCPP connections
- VerbeterdReading the P1 and Victron meters is more reliable in the event of communication failures.
- VerbeterdStability of mixed three-phase charging
- VerbeterdError reporting and diagnostic system
- VerbeterdImprovement of home battery charging priority in PV charging modes
-
- NieuwManagement of home battery discharge in charging profiles
- NieuwUnlocking the Trydan by smartphone proximity
- NieuwNew models of SofarSolar and Azzurro inverters
- NieuwAdded current and voltage per phase in Home Assistant and Modbus API.
- NieuwWiFi connection in Deye inverters
- NieuwIncrease of up to 80 RFID cards
- NieuwBattery compatibility in SolarEdge inverters
- NieuwScroll text for long texts
- VerbeterdOptimization of Ethernet network interface
- VerbeterdImprovements in the Modbus TCP client
- VerbeterdImprovements in mixed three-phase charging
- VerbeterdImprovement of texts in German
- VerbeterdIncrease the voltage range of the installation from the control panel.
-
- OpgelostOCPP password bug
- OpgelostProblems connecting to CSMS after restarts
-
- NieuwTarget charge kWh
- NieuwNew SMA Sunny Boy model
- NieuwNew Fronius model with battery
- NieuwSelect Modbus API address ID
- NieuwNew Deye models
- NieuwSofar Solar inverters
- NieuwAzzurro inverters
- NieuwSelect MID address
- NieuwEMMA Huawei
- NieuwSecurity Profile 2 OCPP (wss + auth + CA cert)
- NieuwPrivate 4G SIMs in OCPP
- NieuwOcppFreeMode
- NieuwOCPP internal queue messages
- VerbeterdTime synchronization
- VerbeterdPower plate measurements 1.0
- VerbeterdWiFi improvements
- OpgelostExclusive mode bug with batteries
- OpgelostCoordinate "ContractedPower" and load profiles with HTTP API.
- OpgelostImprove RFID errors
- OpgelostMixed load bug
- OpgelostBug photovoltaic mode + minimum
- OpgelostBug statistics without FV via BLE
-
- NieuwMIFARE Ultralight RFID cards
- VerbeterdMore robust OTA update
- OpgelostBug management autolock with payments mode
- OpgelostBug in payments mode with RFID
-
- VerbeterdInstallation problem readings
- VerbeterdImprovement in BYD mode
- OpgelostBug with Wibeee inverter
-
- NieuwObtain firmware version via Modbus
- NieuwGoodWe via Modbus TCP
- NieuwOCPP: FirmwareManagement
- NieuwAutolock
- NieuwNew MID models
- NieuwNew wake-up modes
- NieuwAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- NieuwLinky meter for French meters
- NieuwModbus termination resistance
- NieuwReading individual properties HTTP API
- NieuwTurn off/Turn on logo and LCD from HTTP API
- BijgewerktImprovements in dynamic control
- BijgewerktImprovement in Sungrow inverter measurements
- BijgewerktImprovements in the OTA update
- BijgewerktImprovements in the button panel menu
- BijgewerktNew Deye models
- BijgewerktOCPP: improvement in MeterValues
- BijgewerktOCPP: send StatusNotification "Faulted" with errors and warnings
- BijgewerktOCPP: publish current version
- BijgewerktOCPP: BootNotification timeout
- BijgewerktNew NTP servers
- BijgewerktImproved WI-FI scanning
- BijgewerktImprovement in P1 meter
- BijgewerktImprovement in remote logs
- BijgewerktIoT call limitation per charger
- BijgewerktImprove RAM memory
- BijgewerktStability via Ethernet
- BijgewerktCorrected translations
- OpgelostError "Waiting for Power"
- OpgelostBug with RFID cards with long names
- OpgelostBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- OpgelostImprove statistics via Bluetooth
- OpgelostLocal balancing improvements for up to 10 devices
- OpgelostBug when sending RFID code in the statistics
- OpgelostBug with Exclusive PV mode and batteries
-
- NieuwStatic power control is added (only with Trydan consumption).
- NieuwMixed charging adapts to European rates.
- NieuwPower control programming with phase limits is allowed.
- NieuwThe power control adapts to European countries with phase current limits.
- BijgewerktThe power control algorithm has been modified step by step to apply PID modulation.
- BijgewerktThe static power control between sockets or between e-Chargers is improved.
- OpgelostThe failure of remote records is avoided when a disconnection occurs.
-
- OpgelostBug DTSU666-G meters
-
- VerbeterdImprovement in Wake Mode
- OpgelostFixed bug when changing the port in MQTT.
-
- NieuwEcoCharging to schedule charging automatically during the cheapest daylight hours.
- NieuwTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- NieuwCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- NieuwFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- NieuwImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- NieuwImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- NieuwOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- NieuwOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- NieuwOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- VerbeterdReading the power value of the batteries in Goodwe EH and ET inverters.
- VerbeterdSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- VerbeterdImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- VerbeterdImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- VerbeterdImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- VerbeterdOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- VerbeterdOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- VerbeterdOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- OpgelostOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- NieuwVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- NieuwSAJ hybrid inverters
- NieuwShelly Pro meters
- NieuwInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- NieuwDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- NieuwTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- VerbeterdLeak detection
- VerbeterdMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- VerbeterdModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- VerbeterdVisualization of the RFID card authentication process in OCPP
- VerbeterdThe memory used in JSON and OCPP goes to the SPI RAM.
- OpgelostInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- OpgelostCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- NieuwAdaptation of OCPP to new central systems
- NieuwNew Deye models
- VerbeterdImprovements in the direction detection of the V2C 2.0 control box
- OpgelostLEDs blink when there is no connection.
- OpgelostBug in Greenheiss hybrid
-
- NieuwDeye / Turbo Energy three-phase
- NieuwShelly Pro EM and Shelly Pro 3EM (Beta)
- VerbeterdShow text on bidirectional meters
- VerbeterdReadings with Fronius and DTSU666
- VerbeterdReaction times in the leak detector
- VerbeterdShow Waiting for Charge in Stop mode
- OpgelostBug with French language
- OpgelostRaise the HTTP server via Ethernet
- OpgelostBug in payments
- OpgelostRead-only in the OCPP properties
- OpgelostSave power segments via Bluetooth on some devices.
- OpgelostShelly Portugal measurements
-
- NieuwLive Remote Logs
- VerbeterdShow stop due to dynamic control
- VerbeterdRestarts due to reconnection attempts
- VerbeterdQA Protocol
- VerbeterdVoltage and Temperature Reading Power PCB
- OpgelostNaN measurement on some meters
- OpgelostError in Home Wizard readings
-
- VerbeterdPerformance improvement and future compatibility between Trydan and Trydan Pro.
- VerbeterdImprovements in OCPP protocol
- VerbeterdImprovements in the QA process
- VerbeterdImprovement in memory usage
- VerbeterdMore robust statistics
-
- NieuwNetworks with WPA3 security
- NieuwNew BLE (NimBLE)
- Nieuwe-keys via BLE connection
- NieuwNew language: Romanian
- NieuwEnphase version 7.x.x, Solis with batteries
- NieuwAdaptation of the i2c power board
- VerbeterdAzure library update
- VerbeterdUpdate of ESP-IDF and Arduino-ESP32 libraries
- VerbeterdInvestor communication via WiFi connection without Internet
- VerbeterdImprovement in V2C 2.0 meter refresh rate
- VerbeterdImprovement in OCPP, adaptation to support disconnections
- VerbeterdImprovement in key fob detection
- VerbeterdImproved refresh rate
- VerbeterdImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- OpgelostModification of Deye/Turbo Energy batteries
- OpgelostCustomizable MQTT topics and username/password
- OpgelostDisconnection statistics report
- OpgelostBLE compatibility of iPhone
- OpgelostOperation of V2C 2.0 meter at night
- OpgelostAutomatic date and time
- OpgelostInteraction with Megane
-
- NieuwBug in photovoltaic three-phase mode
- VerbeterdWiFi recovery routine
-
- NieuwMixed three-phase charging available through the physical menu.
- NieuwAdded three-phase MID Meter
- NieuwInclusion of server ID 2 in SolarEdge inverters
- NieuwAdded Modbus registers with the meter measurement.
- NieuwHTTP commands added for integration with HA.
- NieuwEnphase Envoy Inverter (beta) (versions 5.x.x)
- NieuwV2C 2.0 error detection of clamp not connected
- NieuwMQTT Slave with user/password authentication and customizable topics (beta)
- VerbeterdImprovement of the WatchDog to prevent system freezing
- VerbeterdImprovement of nearby WiFi scanning
- VerbeterdBluetoothLE service reconnection protocol
- VerbeterdWiFi optimization IRAM and affinity with the Azure task
- VerbeterdReconnection protocol in the absence of WiFi
- VerbeterdFactory reset
- VerbeterdThe error code and LED interface
- VerbeterdImproved the Isolated Installation mode and zero feed-in.
- VerbeterdReduction in cut-off time through dynamic control to 1 min
- VerbeterdAutomatic detection of time and time zone
- VerbeterdThe optimization and refactoring of the measurement slaves
- VerbeterdUnlocking with BLE Tag
- OpgelostOccasional LCD freezes
- OpgelostFalse positives from the leak detector
- OpgelostProblems with the MID Meter
- OpgelostLED error during update
- OpgelostDefault value for JSON type variables
- OpgelostMeasurement at 0 in Deye/TurboEnergy Inverter
- OpgelostVisual errors and local balancing address assignment
-
- NieuwSolar Discount on Shortcuts
- NieuwDeye/TurboEnergy Inverter Beta
- NieuwPhoenix Contact meter
- NieuwCarlo Gavazzi meter
- VerbeterdOCPP improvements and tested in MONTA
- VerbeterdProblems in dynamic control
- VerbeterdReconnections and WiFi Stability
- OpgelostFrozen LCD
-
- NieuwIsolated Mode in Photovoltaic Modes
- NieuwDutch, Danish, and Valencian
- NieuwLeak sensor modes (installer menu)
- NieuwMID meter (installer menu)
- NieuwNew Ingeteam protocol (Battery Management)
- NieuwThree-phase meters DTSU666
- NieuwSDM three-phase meters
- VerbeterdLocal Balancing Protocol and priorities
- VerbeterdDetection of ports and hosts in OCPP
- VerbeterdStable version of SMA Sunny Boy
- VerbeterdPortuguese version of Wibeee
- VerbeterdFronius measuring home consumption
- OpgelostUnexpected locks and unlocks
- OpgelostWhite blinking in locked mode removed
- OpgelostError selecting the slaves in beta
- OpgelostError of SolarEdge three-phase inverters
-
- NieuwChanges and improvements in calibration
-
- VerbeterdCalibration adapted to the new hardware
- OpgelostData analysis in Kostal Piko fixed
-
- NieuwLocal balancing between Trydans available via WiFi or wired connection.
- NieuwSDM-220/320/120 (Tested with the Eastron brand)
- NieuwDDSU-666 Meter (Common in Huawei installations)
- NieuwSelf-calibrating without the need for a car
- NieuwManual hour available
- NieuwHTTP requests to manage the logs
- NieuwNew Modbus Registers
- NieuwGreenheiss inverters
- NieuwSAJ inverters
- NieuwWired Solis inverters
- NieuwResponse time in configurable dynamic control
- VerbeterdConfigurable installation voltage
- VerbeterdNew manufacturing process
- VerbeterdIncluded Shelly three-phase but without FV measurement.
- VerbeterdCar consumption via MQTT fixed
- VerbeterdImproved and more intuitive physical menu
- CompatibiliteitBeta models of Goodwe: the battery measurement is canceled.
- OpgelostBug in Max and Min Intensity via Modbus fixed.
- OpgelostFalse positives in the leak detector fixed
-
- NieuwPrevention of conflicts between slaves and the cloud
- OpgelostGoodWe conflicts and Azure initialization
- OpgelostFix in Shelly with only three-phase.
-
- VerbeterdPending statistics will be sent only once.
- VerbeterdShelly 3EM three-phase and modification for Portugal
- OpgelostModbus Multiple Readings Hotfix
-
- NieuwNew Modbus registers
- NieuwRFID reader in alpha version
- NieuwSolaX X3 híbrido compatible
- NieuwAvailable calibration and shortcuts via WiFi
- VerbeterdOCPP Improvements
- VerbeterdImprovement in WiFi scanning
- VerbeterdImprovement in reconnection routines
- OpgelostBluetooth timezone failure
- OpgelostError in Trydan synchronization - APP
- OpgelostStatic IP configuration in Trydan via WiFi
- OpgelostError saving Modbus parameters
-
- NieuwNew method for calibrating communication with the car
- NieuwBeta version of the GoodWe ET/EH/BT/BH
- VerbeterdImprovement in the communication analysis with the car
-
- NieuwAuto lock after 60 seconds without a car (shortcut)
- NieuwModification for Three-Phase Installations in Portugal for V2C 2.0
- NieuwKostal Piko is added.
- VerbeterdReformulation of the Dynamic Control Algorithm
- VerbeterdImprovement in the refresh rate of Huawei inverters
- VerbeterdSolarEdge stable (Meter measuring export)
- VerbeterdStable version of GoodWe
- VerbeterdDetection of state D and E according to protocol
- VerbeterdImproved QA process
- OpgelostStored in memory after writings via Modbus TCP and RTU
- OpgelostBug in the FV measurements and peaks resolved for V2C 2.0
-
- NieuwGoodWe in beta version
- NieuwCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- VerbeterdMQTT in stable version
- VerbeterdVictron in stable version
- VerbeterdImproved connection with Azure
-
- NieuwMQTT slave beta version
- VerbeterdDetection of power direction in Wibeee
- OpgelostThe Victron and SolarEdge inverters were bringing down the system.
-
- NieuwSolarEdge inverter added (Beta)
- NieuwVictron inverter added (Beta)
- NieuwAutolock enabled in shortcut (60 s)
- NieuwAutomatic time zone detection
- NieuwAlternative meter for car consumption (RS485)
- NieuwFV Exclusive with configurable variation
- NieuwNew Languages (French, Italian, and German)
- OpgelostFixed error in minimum power mode.
-
- VerbeterdImprovements in Dynamic Control with batteries
- VerbeterdImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- OpgelostResolved the IP configuration issues for Trydan with WiFi and BLE.
- OpgelostResolved the issues with the IP configuration of Shelly BLE.
-
- NieuwInclusion of the Wibeee meter
- NieuwSlave 2.0 compatible with Type 1 and Type 2 installation
- NieuwChange in the established connection blinking
- NieuwDetection and measurement of bifacial load
- NieuwImprovement in the collection and transmission of charging data
- NieuwAlternative Meter Phoenix Contact (ModbusRTU)
- NieuwModbusRTU in Trydan (simultaneous slave and master)
- NieuwStatic IP configuration in Trydan
- NieuwPossibility to select the IP in Shelly
- VerbeterdInclusion of maximum intensity in OCPP (as a property)
- VerbeterdImprovement in the reading of Solax inverters
- VerbeterdInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- VerbeterdModbusRTU and Modbus TCP server in Trydan
- BijgewerktFirst stable version of Ingeteam
- BijgewerktImprovement in the speed of the leak detector
-
- OpgelostError solution in manufacturing when saving WiFi
-
- NieuwEliminate false communication errors from the slaves.
- NieuwSave the first Shelly that Trydan connects to.
- BijgewerktWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- VerbeterdImprovement in telemetry recovery in OCPP
- VerbeterdImprovement in scanning nearby WiFi networks
-
- NieuwInternal Azure ping every 15 seconds to detect disconnections.
- NieuwSeparate reconnections to avoid crashing the server.
- NieuwOCPP adaptation to work with Home Assistant
- VerbeterdMigration of the I2C for the clock and LCD to native idf
-
- VerbeterdIncrease maximum binary size in local webServer
- OpgelostRecovery of OCPP transactions to prevent telemetry failures
-
- NieuwThe configuration of different IDs for Huawei inverters is added.
- VerbeterdCorrection of the power reading of the house
- OpgelostCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- NieuwPayment Method (V2C Payments)
- NieuwOCPP Protocol
- VerbeterdImprovement of WiFi and Bluetooth stability and reconnection
- OpgelostReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- OpgelostCorrection of the maximum file size for updates on Local Server
-
- NieuwList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- VerbeterdReconnection with V2C Cloud after communication loss
- OpgelostCorrected Shelly and Solax routines
-
- NieuwShortcuts on the buttons: Lock and Charging Schedule
- NieuwLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- NieuwAP mode when the configured WiFi is not available
- VerbeterdImprovement in LED error codes
- VerbeterdAdaptation for compatibility with Huawei inverters
-
- NieuwWe added connectivity with Fronius inverters.
- VerbeterdImprovements in screen writing and removal of strange characters
- VerbeterdImprovement in the transmission of statistics via both WiFi and BLE.
-
- NieuwError correction x and y
3 van 46
Alva
Huidige versie 1.0.4 · 5 versies sinds augustus 2026
1.0.4Nieuwste versie
Verbeteringen in de laadsessie en BLE-veiligheid
- VerbeterdBeheer van laadsessie
- VerbeterdGrotere veiligheid BLE
- OpgelostBug bij het weergeven van de tijd en energie in de App en Installer Panel
Eerdere versies 4
-
- OpgelostBug met omvormer Ingeteam
- OpgelostBug met Homewizard P1-meter
- OpgelostBug met Eastron-meter
- OpgelostBug met omvormer GoodWe
-
- NieuwVerbinding met Home Assistant
- NieuwDagelijkse resetlogica
- VerbeterdOntgrendeling met sleutelhangers en RFID
- VerbeterdAfhandeling van uitzonderingen, watchdog en foutopruiming
-
- NieuwIdentificatie connector via LED
- VerbeterdHerstartlogica
- OpgelostBug in payment gerelateerd aan de tijd
-
- NieuwQA- en fabricagelogica
- VerbeterdBeheer van sessies op beide connectoren
- OpgelostKleine bugs
3 van 4
Pole Pro
Huidige versie 6.1.3 · 47 versies sinds mei 2023
Heeft u de vorige Pole? Bekijk de updates ervan.
6.1.3Nieuwste versie
- OpgelostThe charger no longer hangs when rebooting while shutting down the 4G module or dynamic power control
Eerdere versies 46
- 6.1.2OpgelostOCPP security event notifications are no longer sent when the connection uses no security profile (profile 0), since some central systems do not support them
-
- OpgelostCorrected default APN for Wireless Logic SIM cards in Belgium
-
- NieuwAudible buzzer feedback
- NieuwSupport for registering multiple RFID cards
- NieuwReading of the installation meter over Modbus RS485 on DC chargers
- NieuwDynamic power control for DC installations — master and slave units now share and honor the installation power limit
- NieuwLive display of actual consumption versus offered current on the charger screen
- NieuwOn-screen guidance walks the user through registering an RFID card
- NieuwOCPP connection password can now be set from the Cloud and Bluetooth
- NieuwOCPP now supports security profiles, encrypted TLS connections and Basic Authentication for the central system
- VerbeterdLanguage codes standardized to the ISO 639-1 format
- VerbeterdReduced volume of messages sent to the Cloud
- VerbeterdTime synchronization with the CSMS no longer floods the system log
- VerbeterdLog rotation no longer loses history when the disk is full
- VerbeterdSafer firmware updates
- VerbeterdMore reliable connectivity with automatic failover between Ethernet and 4G
- VerbeterdCharges history now loads page by page instead of the whole history at once, for a faster tab
- OpgelostMeasurer error message now reads clearly
- OpgelostMore accurate meter-reading validation
- OpgelostCharge metrics are preserved if a charge is interrupted unexpectedly
- OpgelostScreen orientation set in configuration is now applied correctly
- OpgelostFree-charge mode could not be disabled from the installer panel
- OpgelostDynamic power limit was not applied at tariff/hour boundaries, briefly leaving an installation without a limit
- OpgelostResolved random service restarts (crashes) caused by network device discovery
-
- VerbeterdMore reliable RFID card reading with optimized antenna configuration from first use
- VerbeterdImproved stability and responsiveness of the charger's web interface
-
- NieuwOCPP - Immediate "Preparing" status when receiving a remote start command via OCPP
- NieuwWiFi disabled by default on devices without WiFi configured
- VerbeterdMore reliable RFID card reading with periodic reader reinitialization
- VerbeterdBetter cable connection detection and RFID timeout handling
- VerbeterdCDP - More stable network device discovery, preventing unnecessary register/unregister cycles
- VerbeterdImproved stability when applying configuration changes to the charger
- VerbeterdAutomatic migration of legacy pending OCPP messages after update
- VerbeterdImproved network handling when switching between manual and automatic IP configuration
- OpgelostPower factor value conversion for Carlo Gavazzi meters
- OpgelostImprovements in power measurement accuracy in single-phase or two-phase installations
- OpgelostOCPP - Smart Charging profiles with defined duration now applied correctly
- OpgelostOCPP - Local authentication cache overflow that could prevent charging sessions from startIing
- OpgelostOCPP - OCPP transactions stuck due to unreleased semaphores or null keys
-
- NieuwEnhanced web server for accessing and editing charger properties
- NieuwVisual improvements to the web server interface
- NieuwPersistent price display on screen when the payment system is active
- NieuwRefined error reporting to the cloud
- NieuwPower loss detection
- NieuwWi-Fi disable option from the installer panel
- NieuwNew buzzer system implementation for white boards
- VerbeterdEnhanced RFID calibration with on-screen indicator during the process
- VerbeterdRFID reader no longer forcibly activates when OCPP or Payments are active; explicit configuration is respected
- VerbeterdRefined cable connect/disconnect notification on each event when payments are active
- VerbeterdOptimized RFID card readings
- VerbeterdOCPP - Improvements to the offline transaction queue
- VerbeterdInternal connection optimization and overall performance improvements
- OpgelostOCPP - Improved measurement value reporting
- OpgelostRefined out-of-range measurement error detection
-
- NieuwSoftware-level leak detection enable/disable
- VerbeterdAdjusted cooldown time between charges when a leak is detected
- VerbeterdOCPP - Improvements to the offline transaction queue
-
- VerbeterdWhen OCPP is active, we now show on screen when card passed is not registered in central system.
- OpgelostAfter update OCPP image and QR is now recovered.
-
- OpgelostFixed issue where it didn't allow a remote start if a car is connected but not in an active transaction.
- OpgelostFixed issue in setup interface.
- OpgelostFixed monophasic Carlo Gavazzi measurer.
- OpgelostFixed OCPP issue where it wouldn't charge in connector 2 if connector 1 is charging.
-
- VerbeterdImproved network features mainly 4G connection.
-
- VerbeterdImproved OCPP charge handling.
- VerbeterdEnhanced reliability in the smart charging logic.
- VerbeterdImproved features when stopping a charge with invalid identifiers.
- VerbeterdImproved QR configuration for OCPP.
- VerbeterdImproved error handling when sensors or communication components fail.
- VerbeterdBetter log management to prevent the device’s storage from filling up.
- VerbeterdImproved USB connection features.
- VerbeterdImproved RFID calibration and detection display.
- VerbeterdImproved features related to Bluetooth.
- VerbeterdImproved dynamic power control allowing charge at minimum intensity if master is not detected.
-
- NieuwManual timezone setting is now available – The user will be able to configure the timezone even if automatic detection is disabled
- NieuwCreated a contingency page in case app is not running
- NieuwAdded Italian option for screen
- NieuwAdded default payment QR to pay without app
- NieuwAdded new OCPP personalization options - The user can now set 2 QR codes on the screen
- VerbeterdImproved updater
- VerbeterdImproved network connections
- VerbeterdImproved OCPP meter values
- VerbeterdImproved discovering devices when dynamic control is active
- VerbeterdImproved user interface when updates are in progress
- VerbeterdLocal load balancing is now implemented as dynamic control based specific conditions
- VerbeterdImproved Bluetooth connection
- VerbeterdImproved 4g connections robustness
- VerbeterdImproved STM32 lock timings
- VerbeterdImproved OCPP now allows external intensity limits
- VerbeterdImproved data consumption
- OpgelostWhen locking a connector while charging, it now sends end charge telemetry correctly
- OpgelostFixed dynamic control issues
- OpgelostFixed Carlo Gavazzi power meter
- OpgelostFixed OCPP LMS, diagnostics, and charging profile clearing
-
- NieuwAdded shared library
- NieuwTimezone can be set manually
- NieuwTime is now synced with Central System if OCPP is active
- VerbeterdImproved version/update manager
- VerbeterdImproved megabyte conversion of Network Monitor
- VerbeterdObtaining timezone now doesn't need to have correct time by using only http urls
- VerbeterdMobile usb device name is now obtained dynamically since more usb ports might be used due to TPV
- OpgelostFixed power control issues
- OpgelostFixed that when locking connector during a charge it now ends correctly
- OpgelostRecalculate reboot time when changing time with ble
- OpgelostWe now show on screen when non registered RFID is passed while OCPP is active
- OpgelostFixed OCPP freemode rfid issues
- OpgelostDuplicate StatusNotifications are removed from offline queue
- OpgelostFixed "infinite" OCPP offline queue issue
-
- NieuwAPN can now be set manually
- VerbeterdWe now show on screen different wifi images depending on how strong signal is to let know the user how good the connection is
- VerbeterdGeneral OCPP improvements: we check connection to CS instead of internet for local functioning, we notify a real value now when there's a stop transaction due to power loss, fixed edge cases where connectivity is lost, new ocpp key MaxEVCurrentOffered implemented which limits charge with key instead of smart charging handler, safety mechanisms for ocpp to be more robust
- VerbeterdIn 4g, increased rssi range for "excellent" so that it indicates correctly when the reception is good
- VerbeterdImproved data consumption
- VerbeterdImproved robustness of update
- BijgewerktAccess point time increased to 15 minutes
- OpgelostHandled issues when SSID has whitespace
-
- OpgelostAccess point improvements.
- OpgelostFixed QA issues.
-
- NieuwNew direct method to obtain additional information for Smart Charging.
- NieuwFixed random reboot time.
- VerbeterdFixed unset RFID.
- VerbeterdFixed Unknown measurer and made distinction between Unknown measurer and wrongly configured measurer.
- VerbeterdOCPP Free mode can be toggled through OCPP keys.
- BijgewerktFixed BLE connection with iphone and fixed bluetooth communication error that appeared on app.
- BijgewerktNetwork improvements. No interface resets performed at boot which improves bootup time. Network changes now don't require reboot. When changing WIFI settings or ip ethernet settings, it connects after setting it instead of rebooting.
- OpgelostFixed issue where things on screen were missing in one connector chargers.
- OpgelostFixed time/timezone issue caused when the date is off by a few days.
- OpgelostNew property added to toggle if vehicle should be able to charge even though measurers aren't working ( Only works when OCPP, payments or dynamic control isn't enabled ).
-
- NieuwReflect on screen when charge is paused.
- NieuwMade reboot time random.
- OpgelostIncreased SAS token time to live of azure.
-
- NieuwChanges made to reduce network usage that can be toggled on or off.
- NieuwFixed case where config is corrupted or missing and would give trouble at startup.
- NieuwWe now send dead letter if cpu gets too hot and cpu temperature is now logged.
- VerbeterdFixed OCPP inverted measurer error.
- VerbeterdAdded mechanism to disable or enable Wifi and bluetooth.
- VerbeterdWe now report information regarding which type of connection to the internet the e-charger has.
- BijgewerktChanged led colors. Switched State A (now white) and State B (now green) colors.
- OpgelostFixed set threshold values and neopixel leds of Stm32. We can now also obtain control pilot value from Stm32.
- OpgelostOCPP ConnectionTimeOut value can now be changed on the fly.
- OpgelostWe now report iccid of sim card is connected. If sim is connected but we can't obtain iccid, we send dead letter.
- OpgelostFixed log download of http interface.
-
- NieuwLTE signal is now reflected correctly instead of always showing great signal.
- VerbeterdFixed wathdog reboot after doing hard reset.
-
- NieuwAdded dynamic photovoltaic.
- NieuwAdded dead letters: measurer fails and kernel error.
- NieuwProperty "wifi_info" is now reported.
- NieuwProperty "wifi_static" can be set through ble.
- NieuwWe can now obtain statistics through direct method.
- NieuwAdded individual log level for each type of logger.
- NieuwAdded neopixel led type for stm32.
- NieuwWe can now set threshold values with stm32 and get control pilot value if debug log of "Stm32" is activated.
- VerbeterdImprovements in dynamic control, fabrication, QA, Azure, OCPP, config handling, 4g, access point and stm32.
- VerbeterdWe now obtain timezone through url.
- VerbeterdRemoved raspbian logo and desktop during boot and added V2C logo.
- VerbeterdChanged default language after fabrication from english to spanish.
- BijgewerktGeneral bug fixes.
- OpgelostWhen downgrading we ensure that version we downgrade to is compatible.
-
- NieuwFixed property "ocpp" change bug.
- VerbeterdProperties "powerweekday", "powerweekend" and "phase_map" can be changed through bluetooth.
- VerbeterdChanged configuration handling to differentiate internally and externally set variables so that externally set or obtained variables are handled accordingly following the property schemas.
- OpgelostWe now report wifi_static with static ip configuration.
- OpgelostStatistics are now saved locally.
-
- VerbeterdMeasurer fails are now registered with modbusrtumeasurer.
- VerbeterdScreen font bigger for small title.
- OpgelostValidate configuration with schemas during loading.
-
- NieuwOCPP authorize can now function by connector.
- NieuwOCPP WSS connection.
- NieuwFixed OCPP parent id tag bug.
- NieuwOCPP meter values now work for 3 phases.
- VerbeterdFixed error 3 not appearing on screen.
- VerbeterdFixed energy by hour bug.
- VerbeterdChanged measurer reading approach for faster reads.
- VerbeterdWith dynamic balancing we now show used and available power in frontend.
-
- VerbeterdWe show dynamic balancing information on screen.
- VerbeterdSimplified handling of configuration.
- VerbeterdImproved dynamic balancing.
-
- VerbeterdCharger won't reboot if car is in state B and OCPP or Payments is active.
- VerbeterdWhen car changes from state C to B, charge information will persist on screen.
- VerbeterdCurrent state charge now reports errors.
- VerbeterdAdded configuration property validation.
- OpgelostDirect method to obtain dynamic balancing information.
- OpgelostGeneral dynamic balancing improvements.
- OpgelostOCPP improvements.
-
- OpgelostChanged remaining set_basic_unreported_config to set_basic_config.
-
- NieuwFix dynamic control bug, powerbytram is not being updated.
- NieuwFixed bug where whitelist of reported items wasn't being applied and properties weren't being stored in database.
- VerbeterdRemoved non-repetitive logger.
- VerbeterdChanged access point interface to change apn, with manual mode or mobile operator mode.
- BijgewerktRefactored config charge box. Removed BASIC_UNREPORTED and created whitelist of properties to report.
- BijgewerktPhase map is now not applied to installation meters.
- OpgelostFixed payment bug where a charge couldn't be started properly if charge was started with the hose unlocked.
- OpgelostFix bug with power being zero, dynamic control failing when there are no connectors.
- 3.1.8BijgewerktForce WIFI and bluetooth GPIO pins for compute module 4 to work.
- 3.1.7BijgewerktForce 4g GPIO pins for compute module 4 to work.
-
- VerbeterdWhen we detect that measurers aren't working, we send an unblock command in case there's a charge and the charger has lost power.
- VerbeterdCreate section BASIC_UNREPORTED for properties that are used but we don't want to report.
- VerbeterdLocked value has persistance when measurers fail.
- OpgelostWhen we don't receive petitions from chromium we now press enter and Ctrl+F5 if there's anything we need to accept.
-
- OpgelostChanging WIFI configuration with bluetooth now reboots the charge point.
-
- VerbeterdFixed configuration file so that software works with compute module 3 and 4.
- VerbeterdChanged reboot logic. It will now reboot if there's a car connected but charge is not allowed.
- OpgelostChanged payments qr code.
- OpgelostWe can change log level with property.
-
- OpgelostMeter values fixed. We now send wh instead of kwh.
-
- NieuwPause is now reset when it goes back to state A.
- NieuwShow measurer error as "Error 3" on connector. Behaviour is that connector is locked until it's fixed.
- NieuwSet wire connected again.
- VerbeterdFixed general network errors. Improved access point and wifi connectivity.
- OpgelostFixed error where timezone wasn't set correctly so time appeared incorrectly.
- OpgelostFixed payment_max_mode timeout bug.
-
- NieuwFixed power, it was shown in W and is now in Kw.
- VerbeterdChange timezone automatically.
- OpgelostAdded triphasic phoenix contact measurer.
- VerwijderdFixed removal of grey notification update.
-
- NieuwWhenever there's an action that provokes rebooting, it will show on screen that it's going to reboot and the cause.
- NieuwScreen orientation can now be set and depending on parameter.
- NieuwAdded error message 1 and 2.
- NieuwBluetooth patch so that bluetooth initialization takes less time.
- NieuwCreated patch system. System level changes will be applied with this system.
- VerbeterdMeasurer refactoring.
- VerbeterdImei obtention improved.
- VerbeterdInitial version of bluetooth finished: Obtain properties change basic properties, program charge, reboot, add rfid and change wifi.
- VerbeterdBoot improvements. "Page not found" isn't shown anymore. Boot is faster. There's a gif indicating that system is starting.
- VerbeterdObsolete properties are now deleted automatically so that they aren't reported.
- BijgewerktRFID can now function with payments. If RFID is enabled with payments, registered cards will be able to start charges. If RFID is disabled with payments, no card will be able to start a charge.
- OpgelostLimited number of messages we can send to iothub.
- OpgelostIn OCPP, fixed sending of meter values. Now sending in wh and not in kwh.
- OpgelostBoot patch so that GPIO pin initialization takes less time.
- OpgelostMonophasic measurer Eastron SDM220 implemented.
- OpgelostImproved robustness on all direct methods.
- OpgelostFixed bug where it didn't reconnect properly to iothub when it disconnected.
- OpgelostCreated direct method to put a QR code on the OCPP screen.
- VerwijderdRemoved wire_connected event telemetry.
- 3.0.9OpgelostFixed ocpp meter value Energy.Active.Import, when measurer is flipped.
-
- BijgewerktFixed error where e-Charger couldn't obtain dns when connected with WIFI.
- OpgelostFixed local load balancing when one connector was charging. Now when one connector is charging, it will charge at the set intensity.
- 3.0.7OpgelostFixed ocpp Remote Start Transaction and Remote Stop Transaction.
- 3.0.6OpgelostFixed error that ocurred in ocpp where it didn't clear properly the idtag when finishing a transaction.
-
- BijgewerktChanged access point ip from 192.168.44.1 to 192.168.4.1
- BijgewerktWe now report the charger's state instead of the requested vehicle state.
- BijgewerktChanged access point master password.
- OpgelostFixed websocket connection issue with nuitka compilation.
-
- VerbeterdImproved update logs.
- 3.0.3NieuwMoved Version from center to right side and added V. before the version number.
- 3.0.2VerbeterdSTM will now detect SPI bus communication errors and will automatically reset.
-
- NieuwScreen now shows when RFID card is registered.
- NieuwTop bar now shows version and if access point is accessible.
- NieuwAccess point interface now has, local load balancing, rfid card registering and log download.
- NieuwCheck that compute module and board have been created properly.
- VerbeterdScreen is now monitored so that it refreshes in the case that no requests have been made after 15 seconds.
- VerbeterdQA diagnostic is obtained through access point.
- VerbeterdReduced access point available time to 10 minutes.
- OpgelostFixed bug where connector stopped working properly when sending intensity 0.
-
- NieuwInitial Version
3 van 46
Denka
Huidige versie 1.1.0 · 10 versies sinds oktober 2025
1.1.0Nieuwste versie
- NieuwDynamische vermogensregeling tussen meerdere Denka- en Pole-laders in dezelfde installatie, met automatische verdeling volgens het beschikbare vermogen.
- NieuwEen Denka-master kan de meter van de installatie uitlezen via RS485 om het vermogen van het hele huis te verdelen.
- NieuwHet maximale vermogen van de dynamische controle wordt in kW ingesteld vanaf het V2C-platform.
- NieuwOCPP: Compatibiliteit met OCPP-beveiligingsprofielen 0, 1, 2 en 3, en met Basic Auth-authenticatie; het OCPP-wachtwoord kan worden gewijzigd vanuit de cloud, Bluetooth en de lokale webinterface.
- NieuwOCPP: Interne fouten van de lader worden aan de CSMS gemeld via StatusNotification.
- NieuwLaadgeschiedenis met gedetailleerde statistieken van elke sessie (energie per uur, eindlaadstatus en voertuiglimiet), gepagineerd op de lokale webpagina.
- VerbeterdCommunicatie met het vermogensmodule stabieler, met veel minder fouten tijdens het laden en zonder valse foutmeldingen bij het starten.
- VerbeterdBetrouwbaardere herstarts van de lader
- VerbeterdSnellere 4G-verbinding met het netwerk, met standaard APN en ondersteuning voor Wireless Logic SIMs.
- VerbeterdNetwerk: Significante verbeteringen in het beheer van de netwerkverbinding. Automatische en stabielere wisseling tussen Ethernet, WiFi en 4G, en statisch IP correct toegepast.
- VerbeterdBeheer van schijfruimte: logs worden geroteerd en beperkt zonder historiek te verliezen en het vullen van het geheugen wordt vermeden.
- VerbeterdVerbetering in de validatie na een communicatieprobleem met de auto (SLAC) en het betalingssysteem.
- VerbeterdSignificante verbetering van de foutmeldingen of deadletters naar de verschillende V2C-platformen.
- OpgelostDe door een stroomonderbreking onderbroken ladingen worden correct afgesloten en gefactureerd wanneer de stroom terugkeert.
- OpgelostOCPP: De OCPP-berichtenwachtrij blokkeert niet meer wanneer de server met een fout reageert.
- OpgelostOCPP: Als de OCPP-server de start van een transactie weigert, stopt het laden.
- OpgelostOCPP: De vrije modus kan nu worden uitgeschakeld vanuit het installateurspaneel.
Eerdere versies 9
-
- VerbeterdKaartbetalingen worden afgesloten wanneer het voertuig volledig is losgekoppeld, zodat het in rekening gebrachte bedrag altijd overeenkomt met de geleverde energie.
- VerbeterdBetrouwbaardere herstarts in laders met mobiele connectiviteit (4G).
- OpgelostDe slimme laadprofielen met duur verzonden via OCPP worden nu correct toegepast.
- OpgelostOCPP-berichten die in afwachting zijn van verzending gaan niet meer verloren bij het updaten vanaf een vorige versie.
- 1.0.5VerbeterdDe lader start correct op, zelfs wanneer er geen netwerkverbinding beschikbaar is.
-
- VerbeterdDe verbinding met je OCPP-platform wordt automatisch hersteld na een netwerkfout.
- VerbeterdDe RFID-lezer herstelt zichzelf na een leesfout, zonder dat de lader opnieuw moet worden opgestart.
- OpgelostConfiguratiewijzigingen konden stoppen met toepassen na een interne fout. Nu worden ze altijd toegepast.
- OpgelostDe terminal voor betalingen start niet meer op wanneer deze is uitgeschakeld.
- 1.0.3OpgelostDe lader kon na een lange tijd in werking te zijn geweest stoppen met reageren. Opgelost.
-
- VerbeterdJe OCPP-instellingen en -sleutels worden behouden bij het updaten van de lader.
- VerbeterdFirmware voor vermogensregeling bijgewerkt, voor een stabielere en nauwkeurigere lading.
- CompatibiliteitDenka wordt opgenomen in het verenigde V2C-platform en gaat over naar de nieuwe versie 1.x, die de serie 0.14.x vervangt.
- OpgelostFouten bij het starten of stoppen van een laadsessie via OCPP.
- OpgelostDe lader probeert niet langer oneindig verbinding te maken met de cloud met verlopen inloggegevens.
- OpgelostRFID-kaarten met numerieke codes werden onjuist gelezen.
- OpgelostUpdates konden mislukken bij het overschakelen van bepaalde versies.
-
- VerbeterdSlim laden: schuifregelaar voor vermogen in het installateurspaneel.
- VerbeterdAlgemene verbeteringen in de stabiliteit en betrouwbaarheid van het systeem.
- VerbeterdAlgemene verbeteringen in de werking en stabiliteit.
- OpgelostCorrecties in het gedrag van slim laden OCPP.
- OpgelostCorrectie van problemen in het beheer en herstel van systeemalarmen.
-
- NieuwStoppen van het laden bij een specifieke SoC
- NieuwRapportering van de status van de noodknop.
- NieuwSlider-element in de webserver.
- NieuwRapportering van de SoC van het voertuig en protocol naar de backend.
- NieuwDirecte methode `currentcharge` geeft nu de resterende tijd voor de SoC bulk en volledig terug.
- NieuwDirecte methode om de dienst `autossh` te herstarten.
- NieuwConfiguratie van de IP-modus (publiek/privaat) voor de 4G-verbinding.
- VerbeterdSlim laden OCPP.
- VerbeterdPrestatieverbeteringen.
- VerbeterdOpstarten van de WiFi-module.
- VerbeterdMigratie van de HTTP-server.
- OpgelostFoutoplossingen in de opstartconfiguratie.
- OpgelostFoutoplossingen in het slim laden van OCPP.
- OpgelostFoutoplossingen in de webserver en de communicatie met de hardware.
-
- VerbeterdVerbetering van de prestaties van het verzenden van DC-parameters.
- OpgelostSPI-blokkering opgelost.
- OpgelostBug in `TimerHandler` met `n_connectors`.
-
- NieuwIntegratie van wijzigingen in de gerapporteerde eigenschappen.
- NieuwAanpassing van de kalibratie van RFID vanuit het installatiepaneel.
- NieuwIntegratie van de geobserveerde eigenschap van de gedeelde bibliotheek.
- NieuwStoppen van het laden bij een specifieke SoC.
- NieuwWitte lijst voor opladen per MAC.
- OpgelostBug in `TimerHandler` met `n_connectors`.
- OpgelostHotfix voor de toename van verzonden berichten.
3 van 9
Screen
Huidige versie 2.20 · 66 versies sinds maart 2022
2.20Nieuwste versie
- OpgelostFixed rfid bug in ocpp.
Eerdere versies 65
- 2.19OpgelostFixed rfid card issue in stop transactions.
- 2.18OpgelostFixed OCPP error where transaction wasn't started when states passed from C to B to C.
- 2.17OpgelostCB Master: Improved robustness of rfid charge track so that if one connector is fully charged and a different car wants to charge in the other connector it can now charge.
- 2.16OpgelostCB Master: Fixed bug that wouldn't allow two connectors to charge with payment + RFID.
- 2.15NieuwCB Master/CB N: Rfid cards can start a charge in payment mode if rfid is enabled.
- 2.14OpgelostCB Master: We check if measurer is flipped by connector instead of globally.
- 2.13OpgelostCB Master: We check if measurer is flipped while configuring meter values so that they are sent correctly.
-
- OpgelostCB N: Fixed cloud iot problem.
- OpgelostCB Master: Configuration file is restored correctly in the case it's lost. This provoked the page not found error.
- OpgelostCB Master: Fixed bug where a connector couldn't start a charge when there's a car on the other connector with state B.
- 2.11OpgelostCB Master: Meter power bug fix.
-
- NieuwCB N: Car state management D and E.
- VerbeterdCB N: General payment improvements.
- VerbeterdCB N: In payment method, when you move from status c to b, it does not allow you to reload again until you start a new transaction.
- VerbeterdCB N: Improved restart logic when any OCPP configuration is changed.
- VerbeterdCB Master: General meter improvements.
- VerbeterdPole: Filter to reduce number of logs.
- OpgelostCB Master: Fixed payment bug that sent the upload permission to the wrong connector.
- OpgelostCB Master: Fixed bug that when two cars were connected and the B connector was in B status, when the card was swiped, the B was set to charge when the A should be set.
- OpgelostCB Master: Total energy bug arrangement from version using imported and exported energy.
-
- VerbeterdCB Master: Meter restructuring.
- VerbeterdOCPP: General improvements in Smart Charging and Tx Profile implemented.
- VerbeterdOCPP: Changes due to restructuring of the meter.
- VerbeterdOCPP: Restructuring of smart charging. Obtain composite timetable with several profiles.
-
- NieuwCB Master: Integrated SACI meter and changes so that the serial configuration per connector is not linked.
- VerbeterdCB Master: Increased RFID SPI communication speed and lowered RFID gain if noise is detected.
- VerbeterdCB Master: Code refactoring
-
- NieuwOCPP: Starting point for get composite schedule done.
- NieuwOCPP: Relative profiles are handled but only for Smart Charge profiles where connector id is bigger than 0.
- NieuwOCPP: Smart Charging Tx Profiles are now accepted.
- NieuwOCPP: In websocket connection, added "compression=None" since without it it doesn't work on latest Steve version.
- VerbeterdCB Master: Refactored serial and made some changes that improve flexibility. We can now have one connector with one type of measurer and the other connector with a different type of measurer.
- VerbeterdOCPP: Added next time check mechanism for Smart Charging so we check the next time any limit changes instead of every 30 seconds.
- VerbeterdOCPP: General Smart Charge improvements.
- OpgelostCB Master: Convert to positive the negative values read by Phoenix Contact measurer.
- OpgelostCB Master: Adjusted the precision of Phoenix Contact monophasic measurers.
- OpgelostCB N: Fixed bug provoked by changing local load balancing from v2c service.
- OpgelostOCPP: Change availability of Persistant Data handler is now async so that we can call it without blocking the execution of the ServerController.
- OpgelostOCPP: Fixed clear charging profiles.
- OpgelostOCPP: We handle decimal numbers on the Smart Charge profile's limit.
-
- NieuwCB N: Changes due to Smart Charging
- NieuwOCPP: Smart Charging starting point fininshed.
- NieuwOCPP: Smart Charging configuration keys are handled.
- NieuwOCPP: Smart Charging profiles can be added and will be validated and can also be deleted.
- OpgelostOCPP, CB N and CB Master: Fixed bug when locked was modified and ocpp was activated but chargepoint isn't connected to any central system.
- OpgelostCB Master: Fixed bug when OCPP charge is started where if connector 1 was charging, connector 0 couldn't start a charge.
- OpgelostCB Master: Prevent crash in the case that .versions folder doesn't exist.
- OpgelostCB Master: Register cards are now added to card cache.
-
- NieuwPole: Screen now shows when user passes a non registered RFID card.
- VerbeterdCB Master: Improvements in update process.
- VerbeterdCB Master: Changes so that screen indicates when a non registered RFID card is passed.
- VerbeterdCB N: Improvements in update process.
- VerbeterdOCPP: GetConfigurationKeys now returns unknown keys and we handle SupportedFileTransferProtocols key.
- VerbeterdPole: Romanian identifier moved to position 6 to maintain order language with Trydan.
-
- VerbeterdCB Master: We store RFID cards in cache.
- VerbeterdCB N: RFID reader improvements. Case where two connectors are plugged in and a card is passed.
- VerbeterdCB N: New communication method so that CB master can obtain RFID cards.
- VerwijderdCB Master: We don't send wifi_info in report anymore and we have removed functions related to wifi_info.
- VerwijderdCB N: We don't send wifi_info in report anymore.
-
- NieuwCB N: Static IP configuration through access point.
- VerbeterdCB Master: Improvement in connect/disconnect logic. Disconnection is less rigid and we increased network check from 5 seconds to 15 seconds.
- VerbeterdCB Master: Increased RFID reader antenna gain.
- VerbeterdCB N: When charger reconnects, it will only send report if a property has changed.
- VerbeterdCB N: Properties are now only reported when they have changed from previous value.
- OpgelostCB Master: CWe fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- OpgelostCB N: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- OpgelostOCPP: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
-
- VerbeterdCB Master: Safeguard so that it doesn't fail when there's a missing network card and we try to obtain data usage.
- VerbeterdOCPP: Removed range validation from measurer.
- BijgewerktCB Master: Removed range validation from measurer for Carlo Gavazzi and Phoenix Contact measurers.
- OpgelostCB Master: Fixed energy by hour bug.
-
- VerbeterdCB N: We show in log if i2c reconnects.
-
- NieuwCB Master: Chargebox Cache now stores state of connectivity with V2C service to show it on the screen.
- NieuwCB N: Chargebox Cache now stores state of connectivity with V2C service.
- NieuwPole: The screen now shows a cloud icon to indicate connectivity to our cloud.
- VerbeterdCB Master: Adjustment in measurer so that it can handle int32 represented as uint.
- VerbeterdCB N: Log improvements to not show get_has_internet_connection y and reduce error messages generated when i2c is not working.
- VerbeterdCB N: Changes to reduce calls to has_internet_connection to consume less data.
- VerbeterdOCPP: We log exception names since sometimes exception errors return empty string.
- VerbeterdOCPP: We capture error if there's an error when sending heartbeat.
- VerbeterdOCPP: We change client controller so that it's the same as CB N and CB Master.
- OpgelostCB N: Seconds of timeout now return 0 instead of None if not set.
-
- VerbeterdCB Master: Master now sends the balanced intensity when it changes.
- VerbeterdCB N: Changed order of what happens when configuration is changed. We first update the value, then we report the changes to Azure and finally we set the cache.
- VerbeterdCB N: CB Master now sends balanced intensity instead of CB N probing for change.
- OpgelostCB Master: Fixed error where RFID stops charge while the other connector is enabled.
- OpgelostCB Master: Fixed error where RFID card is passed and both connectors have a car plugged in.
- OpgelostCB N: Fixed bug where changing local load balancing set both connector intensities to 16.
-
- VerbeterdCB Master: Change in log system to not show repeated logs.
- VerbeterdCB Master: Shared properties are now set in the other connector if they are different on startup.
- VerbeterdCB Master: Completely decoupled OCPP from CB N and get_ocpp_config function fixed.
- VerbeterdCB Master: Network state is now sent when changed instead of being probed every 30 seconds.
- VerbeterdCB N: General improvements of communication between modules and cache.
- VerbeterdCB N: Improved stability related with missing configuration.
- VerbeterdCB N: Change in log system to not show repeated logs.
- VerbeterdCB N: Fixed problem where Chargebox loop would destroy RFID state.
- VerbeterdCB N: Fixed OCPP ConnectionTimeout.
- VerbeterdCB N: Completely decoupled OCPP from CB N
- VerbeterdCB N: Network state is now sent when changed instead of being probed every 30 seconds.
- VerbeterdCB N: We only change repository hash if it's different than the current one.
- VerbeterdCB N: Updating checks if charger is updated or not and only changes version after it has been updated.
- VerbeterdCB N: General improvements of communication between modules.
- VerbeterdOCPP: Improved Client Controller traceability.
-
- VerbeterdCB Master: Created Cache to decrease the number of requests and communication between modules.
- VerbeterdCB Master: Fixed network reset problem.
- VerbeterdCB Master: Changes so that Pole can receive all the information it needs in one call.
- VerbeterdCB Master: Changes dues to how the measures are now sent.
- VerbeterdCB Master: General access point improvements.
- VerbeterdCB Master: Improvements due to changes in module communication.
- VerbeterdCB N: Created singletons are now thread safe.
- VerbeterdCB N: Server Controller is now executed sooner due to being fundamental in correct functioning.
- VerbeterdCB N: Changes to take into account CB Master's cache
- VerbeterdCB N: Changed way we obtain measures to perform less requests with Client Controller.
- VerbeterdCB N: Improvements due to changes in module communication.
- VerbeterdOCPP: Created singletons are now thread safe.
- VerbeterdOCPP: Completely decoupled from CB N and now only communicates with CB Master.
- VerbeterdOCPP: Simplified communication between modules.
- VerbeterdOCPP: Improvements due to changes in module communication.
- VerbeterdPole: Created singletons are now thread safe.
- VerbeterdPole: Completely decoupled CB N and we obtain all information needed in one call to CB Master.
- VerbeterdPole: Improvements due to changes in module communication.
-
- VerbeterdCB Master: The charger now limits the number of messages that appear in the case that there's a range validation fail of a measure.
- VerbeterdCB N: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- VerbeterdCB N: Restart Server Controller mechanism.
- VerbeterdOCPP: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- VerbeterdOCPP: Restart async Server Controller mechanism.
- VerbeterdPole: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- OpgelostOCPP: If there's an error handling a request, we won't add it to the offline queue.
- OpgelostOCPP: Include thread and sys libraries.
-
- VerbeterdCB N: When rebooting, we check module communication server.
- VerbeterdCB N: Decoupled concept of connector id and measurer address.
- VerbeterdCB Master: When rebooting, we check module communication server.
- VerbeterdCB Master: Decoupled concept of connector id and measurer address.
- VerbeterdCB Master: Fixed error in Phoenix Contact measurer.
- VerbeterdPole: ZMQ integrated to improve communication.
-
- VerbeterdPole: Improvement to let the user know when to connect the vehicle.
- VerbeterdPole: Screen now reflects if charger has only one connector.
- VerbeterdCB Master: Changed SSID format so that it's the same as Trydan's format.
-
- VerbeterdOCPP: Added measurer range validation.
- VerbeterdCB Master: Added measurer range validation.
- BijgewerktOCPP: AuthorizeRemoteTxRequests is now a read and write configuration key.
- OpgelostOCPP: Fixed problem with repeated logs.
- OpgelostCB Master: Fixed problem with repeated logs.
- OpgelostCB N: Fixed problem with repeated logs.
-
- VerbeterdCB N: Handled special case of change intensity.
-
- NieuwCB Master: Access point logic fininshed.
- NieuwOCPP: Data validation when configuration is changed.
- NieuwOCPP: Charger can now handle multiple transactions offline.
- VerbeterdCB N: If OCPP is on, we disable payment mode.
-
- VerbeterdOCPP: Reset function improved. Corresponding Status Notification is sent.
-
- VerbeterdCB N: General stability improvements.
- VerbeterdCB N: Changed payment method approach.
- VerbeterdCB Master: Changed payment method approach.
- VerbeterdCB Master: Improved robustness in the case the access point software is not installed.
- VerbeterdPole: Improvements due to payment method.
-
- NieuwOCPP: Change availability validates connector.
- NieuwCB Master: Finished Access point.
- VerbeterdCB Master: Changed compressed file formats from gzip to gz
- VerbeterdCB Master: Force backup when restarting.
-
- NieuwCB N: Allow to change intensity, when i2c is failing.
- NieuwCB Master: Implemented most of the access point server functionalities.
- OpgelostCB Master: Fixed OCPP measurer error that ocurred when all selected measures in Meter Values returned 0.
- 1.4.3NieuwCB Master: Initial version of the access point server.
-
- VerbeterdCB N: Changes to improve Pole software.
- VerbeterdPole: Changes to simplify view logic.
- OpgelostCB Master: If payment mode is active, charger won't allow to charge with RFID card.
- OpgelostPole: Removed sourceMappingUrl to prevent 404 error when there's no internet.
- 1.4.1OpgelostCB N: Payment mode changed since payload format for server has changed.
- 1.4.0NieuwPole: Changes in screen software that reflects payment mode, blocking connectors and OCPP.
-
- OpgelostOCPP: Charger won't send Authorize if passed RFID card is already used in a transaction.
- 1.3.23VerbeterdOCPP: We store RFID cards in lower caps to improve robustness.
-
- VerbeterdOCPP: Improved robustness of RFID cards stored in the Local Authorization list.
-
- VerbeterdOCPP: Improved Local Authorization logic.
-
- OpgelostCB Master: Fixed wifilist sending format.
-
- NieuwCB N: We report information regarding wifi_info. Direct method to ask for the SSIDs the raspberry pi detects.
- 1.3.18VerbeterdOCPP: Improved authorization cache handler.
-
- VerbeterdOCPP: Improved handling of measurer values.
-
- VerbeterdOCPP: Improved handling of configuration keys.
-
- BijgewerktCB N: Payment mode with duration and timers.
-
- VerbeterdOCPP: Improved MeterValues handler.
- 1.3.13NieuwOCPP: Finished Local Authorization List profile.
- 1.3.12VerbeterdOCPP: Log Improvements.
- 1.3.11OpgelostOCPP: Fixed bug that wouldn't send Authorize Request when passing the RFID card.
-
- NieuwOCPP: Basic implementation of OCPP profiles: FirmwareManagement, LocalAuthListManagement, Reservation and SmartCharging.
- 1.3.9VerbeterdCB Master: Fixed RFID card reading with Wiegand reader for cards that have a 0 on the left side. Example of cards that failed: 32:0a:2c:23, 41:00:32:12.
-
- BijgewerktOCPP: Availability isn't managed by OCPP anymore. It is handled exclusively by property locked.
- 1.3.7VerbeterdCB N: If charger is blocked, led blinks won't be sent.
- 1.3.6NieuwCB N: Payment Mode finished with start and stop.
- 1.3.5VerbeterdOCPP: Clear Cache can only be performed when all connectors are in the OCPP state Available.
-
- VerbeterdOCPP: Changes so that availability can be changed from CB N.
-
- VerbeterdCB Master: OCPP module can now ask for Status Notification.
- BijgewerktOCPP: The charger the different possible OCPP states in the Status Notification.
- 1.3.2VerbeterdOCPP: We can now set configuration parameters for safeguard.
- 1.3.1VerbeterdOCPP: Change availability is now completely functional. It changes to inoperative during a charge and availability changes the locked value.
- 1.3.0OpgelostOCPP: Changed way we obtain measurer data for OCPP.
- 1.2.0OpgelostOCPP: Temporary fix for Place to plug since OCPP library can't handle unknown keys.
- 1.1.0OpgelostOCPP: Fixed _available_connectors error.
-
- NieuwOCPP.
- NieuwScreen.
- NieuwPole.
- NieuwCB Master.
- NieuwCB N.
3 van 65
V2C Cloud-app
Huidige versie 3.3.2 · 30 versies sinds februari 2023
3.3.2Nieuwste versie
- NieuwNew dark mode built into the app: all screens adapt correctly to the dark mode of your phone.
- NieuwNew appearance screen (Settings > User data > Appearance) to choose between Automatic mode (follows the phone), Light or Dark.
- NieuwNew QR and barcode reader, faster and more reliable, to identify the e-Charger in Payments and during pairing.
- NieuwClearer error messages when signing in incorrectly.
- VerbeterdCleaner app startup, without the initial white flash.
- VerbeterdFixed double margins and grey bars on Android 14 and earlier when leaving and returning to the application.
- VerbeterdLighter app: significant reduction in its size thanks to image and code optimization on Android.
- CompatibiliteitThe app now requires Android 8.0 or later.
- Bijgewerkt"No injection or isolated" mode in charging profiles: the minimum power becomes 300 W, since a lower battery discharge is insufficient, with a warning if a lower value is entered.
- OpgelostFixed an issue where newly created charging profiles could disappear when refreshing the main screen.
- OpgelostFixed the scheduled charging modal (Classic and EcoCharging), which now adjusts to display all its content without needing to scroll.
Eerdere versies 29
-
- NieuwNew V2C in-house notification system, more reliable, and request for notification permission in recent versions of Android.
- NieuwNew languages available: Polish, Lithuanian, Simplified Chinese and Czech.
- NieuwNew favorite e-Chargers list in Payments: save your usual e-Chargers under any name you like to start charging in a single step.
- NieuwThe V2C e-Chargers shown on the map already allow you to start charging directly through V2C Payments.
- NieuwYou can filter the map by V2C e-Chargers.
- NieuwNew compatible inverters for dynamic control: SolPlanet, Hoymiles and Huawei with direct WiFi connection (available for Trydan version 2.5.2 or higher).
- NieuwHome battery management extended to more inverters: Sigenergy (from version 2.5.1), and GoodWe, SolarEdge and SolPlanet (from version 2.5.2).
- NieuwNew alert on Pole Pro when the cable meter does not respond (Error 3), available from version 6.1.0.
- NieuwNew explanation of how mixed charging mode works in Special options.
- NieuwThe main screen now shows the name of the charging profile in use.
- NieuwThe statistics now correctly show negative costs.
- NieuwThe virtual assistant button can be docked to the side of the screen and restored whenever it is needed.
- NieuwNew explanatory message when sharing an e-Charger with an email address that does not have a V2C account.
- NieuwVisual improvements across the entire application: system bars, top margins and adaptation to different mobile device models.
- VerbeterdFaster app startup and lower resource consumption.
- VerbeterdNew date picker design for the global statistics and for each e-Charger.
- VerbeterdImproved Bluetooth connection stability, preventing freezes when connecting, when checking the power settings and when opening the e-Charger options.
- VerbeterdGreater session stability: unexpected logouts are avoided after keeping the app in the background for a long time, and lock-ups when signing in on iPhone are prevented.
- VerbeterdPole Pro network configuration, now more secure: validation of the WiFi network and static IP, the APN does not accept accents, and the presentation of the 4G SIM card has been improved.
- VerbeterdCorrections to tariff names and tariff display, plus new colors to better distinguish periods when editing the electricity tariff.
- VerbeterdInternal optimization to reduce the size of the application.
- BijgewerktV2C Payments: now only the e-Charger administrator can activate it, and when doing so, the location of the charging point is selected.
- BijgewerktV2C Payments: new warning before continuing if the e-Charger has no Internet connection or does not allow charging at that time.
- BijgewerktThe charging priority between the car and the battery is only shown when the installation includes an inverter or the Huawei EMMA meter.
- BijgewerktCompatibility with the new language format in the latest firmware versions of the e-Chargers.
- OpgelostFixed the statistics list on iPhone, which could appear cut off.
- OpgelostCorrected the minimum power displayed when it is below 1 kW on Denka.
- OpgelostFixed an internet connection warning that was being displayed without cause.
- OpgelostFixed an error when selecting car models whose name contains the # symbol.
- VerwijderdThe app no longer requests background location permission, as it is no longer necessary.
-
- NieuwImprovements to V2C Assistant: a new information screen to better explain how the assistant works.
- NieuwImprovements in Dynamic Control: Shelly Pro devices are also compatible with V3.
- NieuwImprovements to battery configuration: the interface of the option that prevents the charger from discharging the home battery has been improved, making its operation clearer.
- NieuwNew compatibility with Sigenergy: added Sigenergy as a compatible inverter for battery control in the charging profiles.
- NieuwNew Solarman inverter discovery: added a system to automatically detect available Solarman devices during setup in Dynamic Control.
- NieuwSolarman discovery via Bluetooth and Wi-Fi: the new system lets you perform discovery using the available connections.
- NieuwImprovements to Solarman configuration: discovered devices are now displayed individually to make them easier to select and configure.
- VerbeterdImprovements to scheduled charging: optimized the operation of the time indicator during scheduled charging sessions.
- VerbeterdNew error handling: improved the behavior of certain app calls when status errors occur.
- VerbeterdImprovements in Oasys: optimized data persistence to correctly retain configuration settings.
- VerbeterdImprovements to AutoCharge management: updated the name and presentation of the AutoCharge feature.
- VerbeterdImprovements to sharing: additional information added to the sharing screen to make it easier to understand.
- VerbeterdVisual improvements in the Solarman discovery flow: improved states, animations, messages and confirmations during the search process.
- VerbeterdGeneral improvements: the application has been optimized and various bugs have been fixed to deliver a more stable experience.
- BijgewerktImprovements to charging profiles: maximum configurable power increased to 12 kW for single-phase installations and 36 kW for three-phase installations to make configuration easier for French users.
- BijgewerktNew support area: access to the support area has been updated.
- OpgelostImprovements to charger sharing: fixed an issue that could cause errors when sharing a charger.
- OpgelostMap improvements: Added token and updated the access used for the maps to ensure their correct operation.
- OpgelostImprovements to inverter configuration: fixed several cases related to the configuration and validation of connection parameters.
- OpgelostStability improvements: several issues detected during the final review have been fixed, such as the change of Charging type in special options not being performed correctly via Bluetooth.
-
- NieuwNew password for OCPP in the advanced options for a more secure configuration.
- NieuwNew notice when location permission is not granted, to make device setup easier.
- NieuwNew reminder in the chatbot to allow movement when necessary.
- NieuwImproved authentication stability, preventing simultaneous token requests and enhancing internal token management.
- NieuwA safety timeout has been added when obtaining the token to prevent blocking in exceptional cases.
- NieuwNew Sigenergy configuration guide via Modbus TCP to simplify commissioning of the inverter.
- NieuwNew link to the Sigenergy setup guide when selecting this inverter in dynamic power control.
- NieuwCompatibility with Sigenergy in dynamic power control, correctly identifying it as an inverter.
- NieuwNew compatible models of Azzurro and SofarSolar inverters.
- NieuwNew notice to restart the Alva when necessary to complete the configuration correctly.
- NieuwMore precise Bluetooth error messages when it is not possible to connect to the charger.
- NieuwNew Ingeteam inverter models and validation of connection data to simplify their configuration.
- NieuwSelection of charging type available in Special options (Available for Trydan version 2.5.0 or higher).
- VerbeterdImprovements to the Bluetooth connection of the Alva, with faster and more stable communication.
- VerbeterdThe chatbot now offers more useful recommendations, with questions tailored to your setup and situation.
- VerbeterdImprovements to smartphone configuration and translation of the texts related to pairing.
- VerbeterdImprovements to the Dutch translations to deliver a more consistent experience.
- VerbeterdGreater control over sending statistics when retrieving them via Bluetooth, preventing issues when the data is corrupted or incomplete.
- VerbeterdInternal optimization of the app to reduce its size and improve compatibility with the latest Android recommendations.
- VerbeterdImproved sensitivity of the charging profiles to avoid changing the segment when clicking.
- VerbeterdImprovement to adjust charging profile times with precision, if desired.
- VerbeterdImproved management of the dynamic control data for the Alva, correcting errors during its query.
- VerbeterdGreater robustness when synchronising the time via Bluetooth on the Trydan.
- BijgewerktThe battery charging priority message in the charging profiles has been updated to make it clearer.
- OpgelostImproved precision on some sliders, fixing data submission when they are clicked directly.
- OpgelostFix for an empty card in the special options.
-
- NieuwShow prioritising household battery charging in the charging profiles (version 2.5.0 or higher).
- NieuwAdd detailed information on battery priority in charging profiles.
- NieuwAdded EMMA as a compatible inverter to prevent battery discharge.
- NieuwIdle fee added in Payments.
- NieuwAdded COM address to the EMMA meter.
- NieuwConnection type sent to ALVA.
- OpgelostFixed a bug when opening the pop-ups.
-
- NieuwAdded integrated AI chatbot.
- NieuwAdded charging session completion log under Special options for Trydans (firmware version 2.5.0 or later).
- NieuwAdded new custom tariff by time periods.
- NieuwOasys chart data displayed as on the website.
- NieuwAdded new "Battery level" field to the Oasys chart.
- NieuwAdded a search feature for when a user has many chargers (more than 10).
- NieuwPagination for retrieving large quantities of cards and eKeys via Bluetooth.
- NieuwThe maximum charging current limit message for the connectors on Alvas will be 640A because they have two sockets.
- NieuwImprovements to the RFID design, pagination, search engine and differentiation by type.
- NieuwDisplay the version number the firmware will be updated to.
- NieuwChecking whether Bluetooth permission is enabled and notifying the user.
- NieuwLimited-current message on the screen for 16-ampere models.
- NieuwChint available by version for Denka and Pole chargers.
- NieuwNew GIF added to show battery discharge and photovoltaic production.
- VerbeterdNew and improved UX for charging profiles.
- VerbeterdImproved UX for the Energy Tariff screen, for custom tariffs.
- VerbeterdImprovements and optimization of calls made during a Payments transaction.
- VerbeterdGeneral Bluetooth improvements.
- VerbeterdImproved design of the User Management screen and the option for the administrator to remove the charger from there.
- VerbeterdMaximum charging current limited for the connectors and improved user experience.
- OpgelostAvoid negative values in Oasys charts.
- OpgelostFixed inconsistent colours in the Oasys charts.
- OpgelostImproved UX of the password change button to prevent multiple clicks.
- OpgelostFaster app startup when accessed without network coverage.
-
- NieuwBattery discharge management notice for Ingeteam in its external application.
- NieuwThe administrator can see whether the charger is being managed by an installer. Other users can see who the administrator is.
- NieuwNew label in the capacity data.
- NieuwDetailed explanations have been added to all the battery fields.
- NieuwUpdate to version 2.5.0 to include compatibility with battery discharge.
- NieuwSafety alerts have been added to warn the user to be careful when pressing certain sensitive functions.
- NieuwGrid management has been added to the Oasys settings.
- VerbeterdImprovement across all Oasys screens
- VerbeterdImprovements in the app (v2c): The energy tariff has been added to Oasys.
- BijgewerktValidation of RFID and eKey length (at least 3 characters).
- BijgewerktThe Ingeteam and EMMA inverters have been removed from the list of compatible inverters for battery discharge.
- OpgelostThe fix addressed an error when displaying the message "Evitar descarga de batería".
- OpgelostFixed an error when saving the settings with the Goodwe inverter.
- OpgelostFixed an error where the main method kept running in a loop even after leaving the screen.
- OpgelostThe power limit issue on Denka has been resolved (hidden, but completed).
- OpgelostCharging current has been permanently hidden on the payment screen.
- OpgelostA possible security vulnerability has been resolved.
-
- NieuwThere is a charge in progress indicated in the statistics.
- NieuwNow the names of the RFID cards appear in the statistics.
- NieuwFinished main battery screens with real data.
- NieuwAdded checkbox to prevent battery discharge from version 2.4.7 onwards for some inverters
- VerbeterdGreater robustness in the firmware update display (The update option will only appear if the current version is strictly lower than the latest stable version in production).
- BijgewerktAllow editors to modify the energy tariff.
- OpgelostFixed error in the GIF without FV.
-
- NieuwSeparation of Azurro and Sofar Solar inverters.
- NieuwPrevention of overly long codes in RFID or eKeys and improvement of the user experience.
- NieuwNew Azurro inverter.
- NieuwImproved fluency in the map menus.
- NieuwIncreased modal size to improve data display.
- NieuwNew improved statistics design.
- NieuwAdded new Huawei EMMA meter.
- NieuwInverter type renamed to Sunny SMA.
- NieuwAdded vehicle registration plate.
- NieuwAdded the type of solar PV energy used in your charging profiles at each moment in the GIF
- NieuwPagination completed for RFID on Denka and Pole Pro
- NieuwNew Fronius types limited to versions above 2.4.2
- VerbeterdImproved display of electric vehicle details.
- VerbeterdImprovement in the Italian translations.
- VerbeterdGeneral translation improvement.
- VerbeterdUsability improvements and repositioning of buttons in EcoCharging
- VerbeterdImprovement in Payments data sampling
- OpgelostFixed the autocharge status check (it should not be performed in that case).
- OpgelostFixed an error in the electric vehicle data.
- OpgelostToken endpoint update across the entire app.
- OpgelostFixed an error on the options screen with MAC addresses on Poles.
- OpgelostImproved compatibility with large-screen devices.
- OpgelostiOS safe-area settings.
- OpgelostFixed an end-to-end issue on Android 15.
- OpgelostUpdating end-to-end obsolete APIs.
- OpgelostAdded safe areas to avoid overlaps with system bars.
- OpgelostCritical security vulnerability fixed in Android.
- OpgelostHidden charge target if the version doesn't include the required update (2.4.3)
- OpgelostFixed a bug when trying to update firmware over local Wi-Fi.
-
- NieuwAdded information on the cost during charging for users with photovoltaic systems.
- NieuwMapbox token change for map search.
- VerbeterdBluetooth connection acceleration.
- VerbeterdImproved design of the BLE pairing.
- VerbeterdRefactoring
- VerbeterdBluetooth connectivity optimization on iOS.
- VerbeterdContextual translation improvements across all languages.
- BijgewerktChange in the location of the V2C Business Panel, now in the main settings.
- OpgelostFixed a bug when configuring V2C Business Panel.
- OpgelostFixed a bug in the charge target checkbox.
- OpgelostFixed a bug on the RFID/eKeys screen for the Alva units.
- OpgelostFixed a bug where the map menus overlapped the notch on iPhones.
- VerwijderdSecondary unit update hidden
-
- NieuwFinished and fully functional widget on Android and iOS.
- NieuwAdded AI chatbot for frequently asked questions.
- NieuwExplanation and notice for the Linky meter.
- NieuwNew protocols for Goodwe inverter.
- NieuwNew links for the new "Informational videos".
- NieuwNew screen for pairing chargers via Bluetooth proximity.
- NieuwNew screen to configure the time zone.
- NieuwAdded Alva to the model lineup
- NieuwNew option to link your e-Charger with a company.
- NieuwTwo new subtypes for the Fronius inverter.
- NieuwNew tariff for France: EDF Tempo
- VerbeterdBest UX design for classic scheduled charging.
- VerbeterdImproved data transmission and alerts for dynamic power control.
- VerbeterdRefactoring of part of the code.
- VerbeterdImprovement of some incorrect labels in all languages.
- VerbeterdImproved the display of the emergency button pressed alert on Denkas.
- VerbeterdImproved display of more specific errors when sharing a charger.
- BijgewerktLibrary updates on iOS.
- BijgewerktNew design for adding information about your electric vehicle
- OpgelostStatistics use the start date as the reference, so that they appear within a given time interval.
- OpgelostFixed a bug when entering an empty SSID on Poles and on iOS.
- OpgelostGerman translations corrected.
- OpgelostFixed the map bug on iPhones.
- OpgelostFixed a bug in the display of costs in the statistics.
-
- NieuwAdded alert for emergency button activated on Denka.
- NieuwAutocharge feature: List of authorized vehicles for Denka.
- NieuwNew flow in the photovoltaic diagram.
- NieuwShare charger directly via email.
- NieuwImprovement in the logs for uploading statistics manually.
- VerbeterdImprovement of the charging skeleton on the home screen
- VerbeterdBetter explanation of current per phase
- VerbeterdImprovement of Italian translations
- VerbeterdRemoved orientation restriction for greater compatibility with some tablets
- BijgewerktLibrary update
- BijgewerktFirebase library updated for greater security.
- BijgewerktCorrect order of the static IP configuration properties.
- OpgelostBug fix when updating EcoCharging with a specific time.
-
- NieuwAdded G2 type to the Goodwe inverter
- NieuwAdded charging limit on Denka units
- NieuwBattery capacity display on Denka.
- NieuwRemaining charging time on Denka
- VerbeterdMore space in the bottom menu for some devices
- VerbeterdImproved bottom menu view for users with very large font sizes
- BijgewerktChanges to the Solis inverter type
- BijgewerktChange in the statistics sample: I now take endCharge into account, as the server does.
- BijgewerktChanges to server calls, without the trailing slash
- Bijgewerkt"Wake-up mode" hidden
- BijgewerktHidden 'Common registers' type on DEYE inverter
- BijgewerktGPS is not an essential requirement to download the App.
- BijgewerktIt is no longer necessary to specify the user's area in the electric vehicle settings.
- OpgelostFixed a bug when retrieving data in Special Options
- OpgelostMinor bug fixes
-
- NieuwAllow SIM card data to be recharged without the e-Charger connected
- NieuwNew warning messages for sensitive functions
- Verbeterd"Overall stability improvement"
- BijgewerktChange of the property name to term_resistor
- OpgelostThe bottom menu no longer overlaps the information
-
- VerbeterdTotal improvement of Portuguese translations
- VerbeterdTotal improvement of French translations
- VerbeterdPartial improvement of German translations
- OpgelostFixed a bug when changing the power on Denka units.
- OpgelostBetter error handling on the map
-
- NieuwPhase map adapted for Trydan
- NieuwAllow secondary chargers to change the maximum and minimum current
- NieuwAccess restriction to charging profiles for non-master chargers, and separation of current limits
- NieuwChange and notice for DEYE inverter types
- NieuwAdded BUS termination resistor view to dynamic control
- NieuwImproved data loading on the network screen
- NieuwLocal load balancing for Trydan, show BUS termination resistor status
- NieuwImproved robustness in sending statistics over Bluetooth
- NieuwNew home screen (splash screen) configured and optimized
- NieuwImproved app restart without fully closing it; new finished designs with customizable background screen
- NieuwNew logic on the device's home screen
- NieuwNew data upload design on the home screen
- NieuwFinished supplier filter
- NieuwAdded skeletons (modern data loading) on the main screens
- NieuwNew server calls, transaction grouping and pagination
- NieuwNew server calls: listing and downloading invoices by type
- NieuwAdded a clock next to the time in statistics, changed € to a generic currency symbol, and the statistics list now appears under general statistics.
- NieuwNew DEYE type and added new Linky meter
- NieuwApp translated into Basque and refactored to make it easier to add new languages
- NieuwNew energy tariffs added
- NieuwAdded new screen to confirm free payments
- NieuwAdded another type for the Goodwe inverter
- NieuwWarning in the e-Charger restart message
- NieuwNew tariffs calculate their price correctly on the charging screen
- VerbeterdDesign improvements and enhancements across all iPhone screens with Dynamic Island
- VerbeterdImprovements to the statistics display
- VerbeterdImproved the display of statistics over long time ranges
- VerbeterdImprovement in the skeletons
- VerbeterdInverters and meters, sorted alphabetically
- VerbeterdCompetitive EcoCharging savings price and the ability to resume from any state
- VerbeterdEnhancements to the device's main screen
- VerbeterdImprovements in LetMeCharge
- BijgewerktRefactoring of the main screens
- BijgewerktSending the battery capacity as a number instead of a text string
- BijgewerktChanged server calls to the new transactions
- OpgelostHide Modification Type Portugal
- OpgelostFixed current limits on the main screen and redesigned/refactored the settings screen
- OpgelostFixed the numeric input type on some inputs that allowed text entry.
- OpgelostFixed a bug when selecting charging profiles: it always started on "weekdays".
- OpgelostFixed a bug in the photovoltaic GIF.
- OpgelostFix in the token refresh
- OpgelostFixed a bug when displaying the firmware version
- OpgelostFixed a bug when changing the cache
- Opgelost"Do not show the lock if the charger is not connected (Wi-Fi or Bluetooth) and fixed a bug when displaying the power level"
- OpgelostAvoid screen lock due to internet connection in statistics
- OpgelostFixed a bug when displaying statistics
- OpgelostFixed bug in dynamic control, undefined IP
- OpgelostFixed minor bugs
- VerwijderdRemoval of unused screens
- VerwijderdRemoved the card borders
- VerwijderdRemoved unnecessary elements
- VerwijderdRemoved the current limit per phase when the charger is single-phase
-
- NieuwNew permissions and restrictions based on e-Charger model and user role
- NieuwMaximum and minimum power limit on Denka
- NieuwAnimation without chargers adapted to the new design
- NieuwNew dynamic control for Trydans with version higher than 2.3.0
- NieuwAdded map (Coming very soon)
- NieuwNew design with bottom menu
- VerbeterdCode refactoring for better maintainability
- VerbeterdImproved reconnection between main screens
-
- BijgewerktiOS SDK update to allow publishing.
- OpgelostFixed a bug in the creation of the EcoCharging plan.
- OpgelostFixed font size on some screens.
- OpgelostFixed a bug when selecting static control on the Pole Pro.
- OpgelostFixed a bug when requesting location on Android 14.
- VerwijderdFull removal of the load-balancing app between sockets (it is now included in the dynamic control operation).
-
- NieuwSerial number added to the Enphase inverter.
- NieuwStats chart added in EcoCharging.
- NieuwRefactoring of the application and new way of displaying dynamic control according to the version and model of the e-Charger.
- NieuwAddition of Italian language to Pole Pro.
- NieuwCo-owners can edit their credit card.
- NieuwDo not allow configuring charging profiles on a device that is not the Master.
- VerbeterdEnhanced Bluetooth calls for Pole Pro.
- VerbeterdImproved robustness when retrieving statistics via Bluetooth.
- VerbeterdServer Call Refactoring.
- VerbeterdTranslation improvements.
- VerbeterdGreater robustness when changing a scheduled charge.
- VerbeterdPerformance improvement at application startup.
- VerbeterdImprovements to the connection setup screen.
- OpgelostFixed the invoice PDF download.
- OpgelostFixed a blank screen error when configuring the connection.
- OpgelostFixed error when updating via local Wi-Fi.
- OpgelostInconsistency fixed with OCPP: it appeared as enabled when it was not enabled via Bluetooth.
- OpgelostError fixed when displaying cost in charts with photovoltaic energy statistics.
- VerwijderdElimination of load balancing between sockets on Poles; it now balances automatically through dynamic power control.
-
- NieuwAllow deleting e-Charger if Cloud Dynamic Control is enabled and you are not the Administrator
- VerbeterdAvoid excessive calls on the main screen with multiple e-Chargers
- VerbeterdTroubleshooting errors when editing RFID cards or Bluetooth key fobs
- BijgewerktUpdate the Denka's minimum current to 1kW
- BijgewerktLibrary updates and performance optimisation
- BijgewerktAllow power levels above 100 kW in charging profiles
- OpgelostFixed a bug when uploading statistics via Bluetooth.
- OpgelostFixed a bug when retrieving data from Shelly Pro in dynamic control
- OpgelostFixed a bug when adding the first charging profile via Bluetooth
- OpgelostFixed a bug when downloading invoices on any mobile device
- OpgelostFixed white screen bug when adding a Pole
-
- NieuwNew feature: added "Wake-up mode".
- NieuwTurn off notifications when you log out.
- VerbeterdImprovement in optimization, higher speed.
- OpgelostFixed a bug when retrieving statistics via Bluetooth with photovoltaic discrimination.
- OpgelostFixed a bug when updating the reported property when changes are made to a property.
-
- NieuwStatistics show the cost with solar PV applied, and savings are also displayed.
- NieuwOption to change the LED brightness
- NieuwAbility to set a different COM address for the DDSU666-H meter
- NieuwAdded Fronius inverter types
- NieuwNew e-Charger Denka added
- NieuwNew tariffs added (Indexed and OMIE)
- NieuwNew properties of the Denka e-Charger added
- NieuwNew inverters added
- NieuwActivated EcoCharging alert
- NieuwAdded EcoCharging plan view
- NieuwDenka feature integration
- NieuwNow notifications are differentiated by type and can be selected according to the user's preference.
- NieuwTranslations of all new screens.
- NieuwSome options are disabled when cloud dynamic control is enabled.
- NieuwWarning message when changing the OCPP settings.
- NieuwAdded Deye inverter types to dynamic control
- NieuwAdded date filter to transactions.
- NieuwAdded new Shelly pro meter to dynamic power control
- VerbeterdImproved French translations.
- BijgewerktFirmware update to version 2.2.7
- BijgewerktEmail verification submission form updated
- BijgewerktText changes for 4G and Ethernet.
- OpgelostFixed the error when displaying battery charging in the GIF.
- OpgelostFixed a bug on the RFID screen that would get stuck, loading indefinitely.
- OpgelostChanged the text on monthly invoices and fixed the default month on invoices.
- OpgelostFixed error when the server fails to request the MAC, and when the JSON fails to request the reported value via Bluetooth.
-
- VerbeterdTranslation improvements
- Opgelost"Fixed the issue with the time change when editing hours in charging profiles"
-
- NieuwAdded the types for the Greenheiss inverter and the SAJ inverter.
- NieuwAdded an ion-range to the power selection of the charging profiles
- NieuwNew connectivity options for Trydan Pro (4G and Ethernet)
- NieuwReboot notice for the e-Charger when Wi-Fi is configured
- NieuwStatistics refresh for greater robustness
- NieuwExtension of time to add an e-Key for greater reliability
- VerbeterdImprove the translations
- VerbeterdImproved user messages on e-Keys
- BijgewerktRFID cards and e-Keys can be added, edited and deleted without needing to activate them.
- OpgelostFixed a bug where the scheduled time did not appear on Pole Pro.
- OpgelostFixed a time zone bug in charging profiles (it mainly occurred in Portugal).
-
- NieuwNew tutorial pop-up screen created for cases where something needs to be explained to the user in greater detail.
- NieuwError handling in charging profiles to alert the user if something has not been saved correctly.
- NieuwPhotovoltaic aggregated into the charging profiles for Pole Pro.
- NieuwImproved Bluetooth localization on some phones, and we show an error message if the Bluetooth connection fails.
- NieuwAdded COM 1 and COM 11 types to the Huawei Chint meter in dynamic power control.
- NieuwHidden the photovoltaic GIF for the Pole Pro models.
- NieuwOption to add a free COM address for the Huawei inverter.
- NieuwAdded the ability to configure a static IP for Pole Pro.
- NieuwAdded a new message in the GIF for when there is no photovoltaic production.
- NieuwNew translations added.
- NieuwAdded user information about configuring the static IP on Pole Pro.
- NieuwAdded 'car topic' to configure MQTT in dynamic control.
- VerbeterdImprovement in the dictionary format (internal code).
- VerbeterdImprovement in saving charging profiles: it is no longer impossible to save charging profiles with more than 5 time slots via Bluetooth.
- VerbeterdOverall performance improvement of the application and code optimization.
- BijgewerktNew per-device notification handling instead of per-account, and unsubscription from them when the pairing is removed.
- BijgewerktSwitched the Bluetooth ID storage from localStorage to sessionStorage for more robust connection handling.
- BijgewerktName change from "V2C Meter 2.0" to "V2C ControlBox".
- OpgelostFixed bug sending MQTT username and password in dynamic control.
- OpgelostFixed a bug when displaying statistics that started at 00:00.
- OpgelostFixed a bug when switching languages: the save button was sometimes not displayed.
- OpgelostFixed a bug in the Shelly type submission in dynamic control.
-
- NieuwShare charger available in 'User management'.
- NieuwV2C Payments process opens within the same app for a more convenient payment experience for the user. (It does not work if the user has the MI Browser set as the default on their mobile phone; it does work for Google Chrome and Safari.)
- NieuwAdded a notice to the user to resume charging if V2C Payments is enabled.
- NieuwNew languages available for Trydan.
- NieuwDynamic power control and charging profiles available on Pole Pro.
- NieuwAdded Trydan compatibility with Enphase inverter.
- NieuwAdded Trydan compatibility with P1 meter.
- NieuwAdded Trydan compatibility with Modbus feeder meter.
- NieuwAdded new additional configuration options for MQTT.
- NieuwDifferentiation of types for Solis inverter (With or Without batteries).
- NieuwAdded the Romanian language to Trydan.
- NieuwAdded phase map configuration on Pole Pro under Special options.
- NieuwImplementation of DeadLetters for logging background user errors.
- NieuwPower tiers with current limit for Pole Pro.
- NieuwAdded no-meter option in dynamic control for Pole Pro.
- NieuwImportant notices when changing dynamic control to improve UX.
- NieuwNew screen, list of available slaves for Pole Pro when acting as Master.
- VerbeterdFaster charging from the configuration while offline.
- VerbeterdImportant improvement in the stability of the Bluetooth key fobs, both over WiFi and over Bluetooth.
- VerbeterdImproved design of the Special Options.
- VerbeterdImproved Bluetooth search and location on iOS.
- VerbeterdImproved some Bluetooth methods.
- VerbeterdUX improvement when changing the e-Charger name.
- VerbeterdImproves Bluetooth stability on Pole Pro.
- BijgewerktChange from kW to W for battery discharge.
- BijgewerktChanged "Dynamic control configuration" to "Charging profiles".
- BijgewerktName change: the Bluetooth key fobs are now called e-Keys.
- BijgewerktIncreased Bluetooth scan time on the main screen.
- OpgelostFixed a bug when refreshing without any chargers.
- OpgelostFixed a bug where the mobile back button did not work correctly on some screens.
- OpgelostUpdating the RFID card or key fob list when activating them.
- OpgelostImproved invoice view in English.
- OpgelostDo not allow deleting e-Charger if the user is offline.
- OpgelostAllow the charger to be enabled from inside with the self-locking feature activated.
- VerwijderdDeleting the Parking message in V2C Payments when the parking is free, to avoid confusion.
-
- NieuwAdded an alternative SolarEdge meter to the Dynamic Control.
- NieuwAdded confirmation before updating Firmware.
- NieuwMore and better translations.
- NieuwError handling in Payments.
- NieuwAdded new Google Home image.
- VerbeterdImproved connectivity and Wi-Fi reception on the home screen.
- VerbeterdOffline configuration screen will load faster.
- BijgewerktConsolidate RFID card activation and editing on a single screen. (The same applies to Bluetooth key fobs.)
- BijgewerktChanged Huawei-type to COM address.
- BijgewerktSend to the home screen after restarting the e-Charger.
- BijgewerktChange when we make a free transaction in Payments.
- Bijgewerkt"Do not allow changes to Payments when there is no Internet connection."
- OpgelostFixed a bug that asked for the Huawei type for any meter or inverter.
- OpgelostFixed a bug when displaying statistics for charging sessions carried out between 22:00 and 00:00.
- OpgelostFixed a bug when entering an empty power tier name.
- OpgelostFixed a bug in Payments with the free rate.
- OpgelostFixed a time zone bug in the statistics.
- Opgelost"Fixed small bugs."
-
- NieuwThere is now a new type of photovoltaic system in the power tiers, called "No injection or isolated".
- NieuwThe power tiers are stored on the server and in the cache to ensure correct operation on any device and in any situation. (With internet, without internet, with Bluetooth, etc.)
- NieuwAdded Bluetooth key fobs for the Trydan.
- NieuwAdded informative messages to the user for a better user experience.
- NieuwThe token is only requested once per minute or when entering the application, and it is cached for better speed (previously it was requested with every HTTP call).
- NieuwAdded the option to restart the e-Charger in "Special options".
- NieuwGoogle Home is now available, and the corresponding information has been added to the app.
- NieuwStronger error control in some posts for greater transparency for users.
- VerbeterdImprovement in the retrieval and upload of statistics via Bluetooth.
- VerbeterdImproved stability of some Bluetooth connections
- VerbeterdImproved the design of the Payments screens.
- BijgewerktThe value will not be shown in the solar PV GIF if the data is 0 or null.
- BijgewerktIf the device language is Basque, the app will default to Spanish (previously it defaulted to English).
- OpgelostFixed the photovoltaic GIF that would freeze on some iOS devices.
- OpgelostMinor bug fixes.
-
- NieuwAdded the IP address to the WiFi information.
- NieuwTake the parking cost into account after charging with V2C Payments.
- NieuwShelly static IP explanation.
- NieuwReal-time updates of payment status on the main screen.
- NieuwNew inverters added.
- NieuwChange in Shelly inverter rates.
- VerbeterdImproved Bluetooth reconnection on the main screen on iOS.
- VerbeterdDifferentiated the option between swiping and clicking to lock the charger.
- VerbeterdImproved Bluetooth stability for certain calls that sometimes failed.
- BijgewerktLarger button for payments without chargers.
- BijgewerktCorrected new QR format.
- BijgewerktAbility to modify OCPP via Bluetooth on Trydan.
- BijgewerktDesign change on the V2C Payments screen
- OpgelostFixed push notifications on iOS.
- OpgelostFixed the Google login issue on iOS when sharing the charger.
- OpgelostFixed error with the PVPC 2 format.
- OpgelostFixed an error when modifying tariffs.
- OpgelostFixed an error in the download of payment invoices.
-
- NieuwNew inverters added
- Nieuw"New notice if you have successfully obtained the statistics via Bluetooth"
- NieuwNow location is only required with Bluetooth turned on
- NieuwTake the batteries into account in the photovoltaic GIF
- VerbeterdGreater consistency in data sending and receiving via Bluetooth
- VerbeterdDon't let the user enter an empty RFID name and new translations.
- OpgelostFixed the retrieval of statistics via Bluetooth.
- OpgelostFixed the bug with the photovoltaic GIFs
- OpgelostFix for the notifications
3 van 29
V2C Cloud-webportaal
Huidige versie 4.1.1 · 45 versies sinds december 2020
4.1.1Nieuwste versie
- NieuwActivate or deactivate the default rate for each e-Charger in Payments.
- NieuwEcocharging plan available for Oasys batteries.
- VerbeterdUpload your own invoices in the Invoices section of Payments.
Eerdere versies 44
-
- NieuwMandatory location for e-Chargers in Payments.
- NieuwMake the charger public from Payments so that it is visible on other platforms.
- NieuwAssign a different rate to each group in Payments.
- NieuwMonthly fee rate within Collective Charging.
- VerbeterdNew design for the Payments platform.
- 4.0.4VerbeterdNew way to configure the Ingeteam inverter.
-
- NieuwItalian tariffs.
- 4.0.2NieuwRates by periods.
- 4.0.1NieuwBattery prioritization in charging profiles.
-
- VerbeterdNew design of the portal v2c.cloud.
- VerbeterdSupport for viewing on mobile devices.
-
- NieuwNew Sofar Solar inverter.
-
- NieuwSelect time zone, manually or automatically.
- NieuwNew Huawei Emma inverter.
- NieuwNew Azzurro inverter.
- VerbeterdIncrease in code size on RFID cards.
-
- VerbeterdNew rates added.
-
- VerbeterdNew PDFs in Spanish and English in Payments.
- OpgelostCharging power limit on Denka.
-
- NieuwCharging stops upon reaching the selected percentage for Denka models.
- NieuwTPV icon.
- NieuwPossibility to see more chargers on the main page.
- NieuwCalculator in Payments rates.
- VerbeterdSelection of the auto-lock time for Trydan with version 2.3.25 or higher.
-
- VerbeterdChange in design when adding/modifying rates in Payments.
-
- OpgelostBug fixes in cloud installation.
-
- OpgelostFixing errors in RFID cards.
-
- NieuwCatalan language added.
- OpgelostBug fixes in the cloud power control.
- 3.2.12OpgelostFixing errors in power control profiles and in the meter list.
-
- BijgewerktImprovement in RFID cards to manually support 14 characters.
- 3.2.10OpgelostError fixing
-
- NieuwFiltering by status (online/offline) available for e-Chargers.
- VerbeterdVisualization of the e-Chargers version on the homepage.
- 3.2.8VerbeterdGrouping of types in Payments invoices.
-
- OpgelostFix when filtering date range in Payments and dashboard.
-
- VerbeterdIncrease in the maximum number of power control profiles.
-
- NieuwItalian language in Pole Pro.
- BijgewerktOptional OCPP customization properties in Pole Pro.
-
- VerbeterdCreation of more intuitive power profiles.
-
- VerbeterdImproved visual aspect when creating power profiles for cloud power control.
- BijgewerktGreater reduction in the cloud power control zoom and the option to reset zoom changed to center the installation.
-
- VerbeterdAbility to download statistics as a .xlsx file.
- OpgelostFixed various minor bugs.
-
- VerbeterdAdded a waiting indicator when saving an installation in cloud power control.
- BijgewerktModified text and color according to the state of the e-Charger in cloud power control.
- OpgelostImages of e-Chargers in installation view in cloud power control.
-
- NieuwRight-click menu in cloud power control.
- NieuwSelect, copy, paste, duplicate, and delete multiple elements in cloud power control.
- VerbeterdMove and zoom in on an installation with the mouse wheel in cloud power control.
- BijgewerktThe upper power limit in the charging profiles has been modified.
- OpgelostFixed various minor bugs.
-
- NieuwAdded Basque language
- VerbeterdPerformance improvement on the e-Chargers page and control panel
- BijgewerktNew way to display the details of the e-Chargers
- OpgelostFixed various minor bugs.
-
- NieuwRight-click to delete an active item during the creation or editing of an installation in cloud power control.
- NieuwThe customer's email appears when downloading the transaction table from V2C Payments.
- VerbeterdImproved interaction between elements during the creation or editing of an installation in cloud power control to avoid impossibilities.
- BijgewerktV2C Payments transaction table sorted by date in descending order.
- OpgelostFixed various minor bugs.
-
- BijgewerktNew validations when creating rates in V2C Payments.
- OpgelostFixed errors in displaying the power control settings.
- 3.1.0NieuwNew design of the portal v2c.cloud
-
- VerbeterdGreater speed also on the main screen, and in the charging of the user's e-Chargers.
- VerbeterdChange the configuration to parallel for faster data loading.
- BijgewerktAll the inverters and meters available in the App have been added.
- OpgelostFixing various bugs, updating and improving translations and user experience.
-
- NieuwAdded list of wifi networks
- NieuwAdded hamburger menu for better visualization of the canvas in smart charging.
- NieuwAdded shared user management
- NieuwAdded translations
- NieuwAdded user help for CSV download
- NieuwRomanian language added
- NieuwAdded the partner creation form
- VerbeterdCharging acceleration of the e-Chargers
- BijgewerktChange the navbar to black
- OpgelostFixed issue with the smart charging zoom.
- 2.0.0NieuwAdded Smart charging
-
- NieuwAdded invitations to customers
- BijgewerktImage tags also translated
-
- NieuwAdded to the main screen charger in payment mode or not with icon
- NieuwNew translations added
- BijgewerktNew design of the main screen
- OpgelostFixed bug with colors changing upon logout
- OpgelostInvoice issue, the correct one was not downloading.
- OpgelostTransactions are now resolved quickly, and there is a change in the format of the rates.
- OpgelostResolved issue in payments with the tabs that were moving.
- OpgelostFixed 'Update software' and bug with charger statuses.
-
- NieuwAdded Payments option
- NieuwInvoices added in the new tab and can be downloaded.
- NieuwAdded flat rate or customized rate when adding a rate
- VerbeterdImprovement in device charging
- VerbeterdImprovement of designs to make them responsive on all devices
-
- NieuwAdded plus charger
- BijgewerktAdd charger in the same way as in the app
- BijgewerktWe show fewer decimals in the tables.
- BijgewerktChange the design of the side menu and some labels.
- BijgewerktRemoved donuts and changed design on the screen up button.
- OpgelostBug fixes and design improvements
- OpgelostFix letter design and login and main screen
-
- NieuwAdded software update in the configuration
- NieuwCost calculation according to the rate
- OpgelostChanging the rate is done correctly.
- OpgelostControlled error changing WiFi without connection
- OpgelostEnergy rate calculation is done correctly.
-
- NieuwYou can now log in by pressing enter.
- VerbeterdCharging screen improves without connection
- BijgewerktChange of design if there is no connection
- OpgelostDynamic power control is adjusted properly.
- OpgelostGlobal statistics are now updating correctly.
- OpgelostFixed main screen hours
- OpgelostCSV data download in the correct format
-
- NieuwNew, more specific errors indicated for the user and installers.
- OpgelostBug fixes when linking devices.
-
- VerbeterdImprovements in website performance.
- OpgelostFunctionality bugs fixed.
-
- NieuwStyle improvements.
- NieuwCreation of the V2C website.
- OpgelostBug fixes.
3 van 44