Opdateringer
Hvad der ændres i hver firmwareversion af vores ladebokse og af V2C Cloud-platformen.
Seneste: Denka 1.1.0 · 12 nov 2026
Trydan og Trydan Pro
Aktuel version 2.5.2 · 47 versioner siden februar 2022
2.5.2Seneste version
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- NyDirect query of OCPP status
- NyNew Solplanet/AISWEI Inverter
- NyNew Hoymiles Inverter
- NyBattery discharge control: GoodWe, SolarEdge
- NyHuawei inverters direct connection without Dongle
- NyUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- NyNew "Unlimited" Wake-up 5 mode available from the LCD
- NyImprovements in Bluetooth cybersecurity
- ForbedretFixes in FV mode + Minimum power
- ForbedretOCPP: duplicate BootNotifications are avoided
- ForbedretSecurity menu lock during vehicle charging
- ForbedretImprovements for Linky-LORA
Tidligere versioner 46
-
- NyCompatibility with SigEnergy inverters
- NyNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- NyWiFi connection for Deye inverters via Elfin
- NyExpansion to 105 RFID cards
- NyPAP/CHAP authentication for 4G connection
- NyMore stable OCPP connections
- ForbedretReading the P1 and Victron meters is more reliable in the event of communication failures.
- ForbedretStability of mixed three-phase charging
- ForbedretError reporting and diagnostic system
- ForbedretImprovement of home battery charging priority in PV charging modes
-
- NyManagement of home battery discharge in charging profiles
- NyUnlocking the Trydan by smartphone proximity
- NyNew models of SofarSolar and Azzurro inverters
- NyAdded current and voltage per phase in Home Assistant and Modbus API.
- NyWiFi connection in Deye inverters
- NyIncrease of up to 80 RFID cards
- NyBattery compatibility in SolarEdge inverters
- NyScroll text for long texts
- ForbedretOptimization of Ethernet network interface
- ForbedretImprovements in the Modbus TCP client
- ForbedretImprovements in mixed three-phase charging
- ForbedretImprovement of texts in German
- ForbedretIncrease the voltage range of the installation from the control panel.
-
- RettetOCPP password bug
- RettetProblems connecting to CSMS after restarts
-
- NyTarget charge kWh
- NyNew SMA Sunny Boy model
- NyNew Fronius model with battery
- NySelect Modbus API address ID
- NyNew Deye models
- NySofar Solar inverters
- NyAzzurro inverters
- NySelect MID address
- NyEMMA Huawei
- NySecurity Profile 2 OCPP (wss + auth + CA cert)
- NyPrivate 4G SIMs in OCPP
- NyOcppFreeMode
- NyOCPP internal queue messages
- ForbedretTime synchronization
- ForbedretPower plate measurements 1.0
- ForbedretWiFi improvements
- RettetExclusive mode bug with batteries
- RettetCoordinate "ContractedPower" and load profiles with HTTP API.
- RettetImprove RFID errors
- RettetMixed load bug
- RettetBug photovoltaic mode + minimum
- RettetBug statistics without FV via BLE
-
- NyMIFARE Ultralight RFID cards
- ForbedretMore robust OTA update
- RettetBug management autolock with payments mode
- RettetBug in payments mode with RFID
-
- ForbedretInstallation problem readings
- ForbedretImprovement in BYD mode
- RettetBug with Wibeee inverter
-
- NyObtain firmware version via Modbus
- NyGoodWe via Modbus TCP
- NyOCPP: FirmwareManagement
- NyAutolock
- NyNew MID models
- NyNew wake-up modes
- NyAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- NyLinky meter for French meters
- NyModbus termination resistance
- NyReading individual properties HTTP API
- NyTurn off/Turn on logo and LCD from HTTP API
- OpdateretImprovements in dynamic control
- OpdateretImprovement in Sungrow inverter measurements
- OpdateretImprovements in the OTA update
- OpdateretImprovements in the button panel menu
- OpdateretNew Deye models
- OpdateretOCPP: improvement in MeterValues
- OpdateretOCPP: send StatusNotification "Faulted" with errors and warnings
- OpdateretOCPP: publish current version
- OpdateretOCPP: BootNotification timeout
- OpdateretNew NTP servers
- OpdateretImproved WI-FI scanning
- OpdateretImprovement in P1 meter
- OpdateretImprovement in remote logs
- OpdateretIoT call limitation per charger
- OpdateretImprove RAM memory
- OpdateretStability via Ethernet
- OpdateretCorrected translations
- RettetError "Waiting for Power"
- RettetBug with RFID cards with long names
- RettetBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- RettetImprove statistics via Bluetooth
- RettetLocal balancing improvements for up to 10 devices
- RettetBug when sending RFID code in the statistics
- RettetBug with Exclusive PV mode and batteries
-
- NyStatic power control is added (only with Trydan consumption).
- NyMixed charging adapts to European rates.
- NyPower control programming with phase limits is allowed.
- NyThe power control adapts to European countries with phase current limits.
- OpdateretThe power control algorithm has been modified step by step to apply PID modulation.
- OpdateretThe static power control between sockets or between e-Chargers is improved.
- RettetThe failure of remote records is avoided when a disconnection occurs.
-
- RettetBug DTSU666-G meters
-
- ForbedretImprovement in Wake Mode
- RettetFixed bug when changing the port in MQTT.
-
- NyEcoCharging to schedule charging automatically during the cheapest daylight hours.
- NyTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- NyCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- NyFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- NyImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- NyImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- NyOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- NyOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- NyOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- ForbedretReading the power value of the batteries in Goodwe EH and ET inverters.
- ForbedretSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- ForbedretImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- ForbedretImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- ForbedretImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- ForbedretOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- ForbedretOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- ForbedretOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- RettetOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- NyVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- NySAJ hybrid inverters
- NyShelly Pro meters
- NyInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- NyDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- NyTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- ForbedretLeak detection
- ForbedretMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- ForbedretModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- ForbedretVisualization of the RFID card authentication process in OCPP
- ForbedretThe memory used in JSON and OCPP goes to the SPI RAM.
- RettetInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- RettetCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- NyAdaptation of OCPP to new central systems
- NyNew Deye models
- ForbedretImprovements in the direction detection of the V2C 2.0 control box
- RettetLEDs blink when there is no connection.
- RettetBug in Greenheiss hybrid
-
- NyDeye / Turbo Energy three-phase
- NyShelly Pro EM and Shelly Pro 3EM (Beta)
- ForbedretShow text on bidirectional meters
- ForbedretReadings with Fronius and DTSU666
- ForbedretReaction times in the leak detector
- ForbedretShow Waiting for Charge in Stop mode
- RettetBug with French language
- RettetRaise the HTTP server via Ethernet
- RettetBug in payments
- RettetRead-only in the OCPP properties
- RettetSave power segments via Bluetooth on some devices.
- RettetShelly Portugal measurements
-
- NyLive Remote Logs
- ForbedretShow stop due to dynamic control
- ForbedretRestarts due to reconnection attempts
- ForbedretQA Protocol
- ForbedretVoltage and Temperature Reading Power PCB
- RettetNaN measurement on some meters
- RettetError in Home Wizard readings
-
- ForbedretPerformance improvement and future compatibility between Trydan and Trydan Pro.
- ForbedretImprovements in OCPP protocol
- ForbedretImprovements in the QA process
- ForbedretImprovement in memory usage
- ForbedretMore robust statistics
-
- NyNetworks with WPA3 security
- NyNew BLE (NimBLE)
- Nye-keys via BLE connection
- NyNew language: Romanian
- NyEnphase version 7.x.x, Solis with batteries
- NyAdaptation of the i2c power board
- ForbedretAzure library update
- ForbedretUpdate of ESP-IDF and Arduino-ESP32 libraries
- ForbedretInvestor communication via WiFi connection without Internet
- ForbedretImprovement in V2C 2.0 meter refresh rate
- ForbedretImprovement in OCPP, adaptation to support disconnections
- ForbedretImprovement in key fob detection
- ForbedretImproved refresh rate
- ForbedretImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- RettetModification of Deye/Turbo Energy batteries
- RettetCustomizable MQTT topics and username/password
- RettetDisconnection statistics report
- RettetBLE compatibility of iPhone
- RettetOperation of V2C 2.0 meter at night
- RettetAutomatic date and time
- RettetInteraction with Megane
-
- NyBug in photovoltaic three-phase mode
- ForbedretWiFi recovery routine
-
- NyMixed three-phase charging available through the physical menu.
- NyAdded three-phase MID Meter
- NyInclusion of server ID 2 in SolarEdge inverters
- NyAdded Modbus registers with the meter measurement.
- NyHTTP commands added for integration with HA.
- NyEnphase Envoy Inverter (beta) (versions 5.x.x)
- NyV2C 2.0 error detection of clamp not connected
- NyMQTT Slave with user/password authentication and customizable topics (beta)
- ForbedretImprovement of the WatchDog to prevent system freezing
- ForbedretImprovement of nearby WiFi scanning
- ForbedretBluetoothLE service reconnection protocol
- ForbedretWiFi optimization IRAM and affinity with the Azure task
- ForbedretReconnection protocol in the absence of WiFi
- ForbedretFactory reset
- ForbedretThe error code and LED interface
- ForbedretImproved the Isolated Installation mode and zero feed-in.
- ForbedretReduction in cut-off time through dynamic control to 1 min
- ForbedretAutomatic detection of time and time zone
- ForbedretThe optimization and refactoring of the measurement slaves
- ForbedretUnlocking with BLE Tag
- RettetOccasional LCD freezes
- RettetFalse positives from the leak detector
- RettetProblems with the MID Meter
- RettetLED error during update
- RettetDefault value for JSON type variables
- RettetMeasurement at 0 in Deye/TurboEnergy Inverter
- RettetVisual errors and local balancing address assignment
-
- NySolar Discount on Shortcuts
- NyDeye/TurboEnergy Inverter Beta
- NyPhoenix Contact meter
- NyCarlo Gavazzi meter
- ForbedretOCPP improvements and tested in MONTA
- ForbedretProblems in dynamic control
- ForbedretReconnections and WiFi Stability
- RettetFrozen LCD
-
- NyIsolated Mode in Photovoltaic Modes
- NyDutch, Danish, and Valencian
- NyLeak sensor modes (installer menu)
- NyMID meter (installer menu)
- NyNew Ingeteam protocol (Battery Management)
- NyThree-phase meters DTSU666
- NySDM three-phase meters
- ForbedretLocal Balancing Protocol and priorities
- ForbedretDetection of ports and hosts in OCPP
- ForbedretStable version of SMA Sunny Boy
- ForbedretPortuguese version of Wibeee
- ForbedretFronius measuring home consumption
- RettetUnexpected locks and unlocks
- RettetWhite blinking in locked mode removed
- RettetError selecting the slaves in beta
- RettetError of SolarEdge three-phase inverters
-
- NyChanges and improvements in calibration
-
- ForbedretCalibration adapted to the new hardware
- RettetData analysis in Kostal Piko fixed
-
- NyLocal balancing between Trydans available via WiFi or wired connection.
- NySDM-220/320/120 (Tested with the Eastron brand)
- NyDDSU-666 Meter (Common in Huawei installations)
- NySelf-calibrating without the need for a car
- NyManual hour available
- NyHTTP requests to manage the logs
- NyNew Modbus Registers
- NyGreenheiss inverters
- NySAJ inverters
- NyWired Solis inverters
- NyResponse time in configurable dynamic control
- ForbedretConfigurable installation voltage
- ForbedretNew manufacturing process
- ForbedretIncluded Shelly three-phase but without FV measurement.
- ForbedretCar consumption via MQTT fixed
- ForbedretImproved and more intuitive physical menu
- KompatibilitetBeta models of Goodwe: the battery measurement is canceled.
- RettetBug in Max and Min Intensity via Modbus fixed.
- RettetFalse positives in the leak detector fixed
-
- NyPrevention of conflicts between slaves and the cloud
- RettetGoodWe conflicts and Azure initialization
- RettetFix in Shelly with only three-phase.
-
- ForbedretPending statistics will be sent only once.
- ForbedretShelly 3EM three-phase and modification for Portugal
- RettetModbus Multiple Readings Hotfix
-
- NyNew Modbus registers
- NyRFID reader in alpha version
- NySolaX X3 híbrido compatible
- NyAvailable calibration and shortcuts via WiFi
- ForbedretOCPP Improvements
- ForbedretImprovement in WiFi scanning
- ForbedretImprovement in reconnection routines
- RettetBluetooth timezone failure
- RettetError in Trydan synchronization - APP
- RettetStatic IP configuration in Trydan via WiFi
- RettetError saving Modbus parameters
-
- NyNew method for calibrating communication with the car
- NyBeta version of the GoodWe ET/EH/BT/BH
- ForbedretImprovement in the communication analysis with the car
-
- NyAuto lock after 60 seconds without a car (shortcut)
- NyModification for Three-Phase Installations in Portugal for V2C 2.0
- NyKostal Piko is added.
- ForbedretReformulation of the Dynamic Control Algorithm
- ForbedretImprovement in the refresh rate of Huawei inverters
- ForbedretSolarEdge stable (Meter measuring export)
- ForbedretStable version of GoodWe
- ForbedretDetection of state D and E according to protocol
- ForbedretImproved QA process
- RettetStored in memory after writings via Modbus TCP and RTU
- RettetBug in the FV measurements and peaks resolved for V2C 2.0
-
- NyGoodWe in beta version
- NyCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- ForbedretMQTT in stable version
- ForbedretVictron in stable version
- ForbedretImproved connection with Azure
-
- NyMQTT slave beta version
- ForbedretDetection of power direction in Wibeee
- RettetThe Victron and SolarEdge inverters were bringing down the system.
-
- NySolarEdge inverter added (Beta)
- NyVictron inverter added (Beta)
- NyAutolock enabled in shortcut (60 s)
- NyAutomatic time zone detection
- NyAlternative meter for car consumption (RS485)
- NyFV Exclusive with configurable variation
- NyNew Languages (French, Italian, and German)
- RettetFixed error in minimum power mode.
-
- ForbedretImprovements in Dynamic Control with batteries
- ForbedretImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- RettetResolved the IP configuration issues for Trydan with WiFi and BLE.
- RettetResolved the issues with the IP configuration of Shelly BLE.
-
- NyInclusion of the Wibeee meter
- NySlave 2.0 compatible with Type 1 and Type 2 installation
- NyChange in the established connection blinking
- NyDetection and measurement of bifacial load
- NyImprovement in the collection and transmission of charging data
- NyAlternative Meter Phoenix Contact (ModbusRTU)
- NyModbusRTU in Trydan (simultaneous slave and master)
- NyStatic IP configuration in Trydan
- NyPossibility to select the IP in Shelly
- ForbedretInclusion of maximum intensity in OCPP (as a property)
- ForbedretImprovement in the reading of Solax inverters
- ForbedretInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- ForbedretModbusRTU and Modbus TCP server in Trydan
- OpdateretFirst stable version of Ingeteam
- OpdateretImprovement in the speed of the leak detector
-
- RettetError solution in manufacturing when saving WiFi
-
- NyEliminate false communication errors from the slaves.
- NySave the first Shelly that Trydan connects to.
- OpdateretWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- ForbedretImprovement in telemetry recovery in OCPP
- ForbedretImprovement in scanning nearby WiFi networks
-
- NyInternal Azure ping every 15 seconds to detect disconnections.
- NySeparate reconnections to avoid crashing the server.
- NyOCPP adaptation to work with Home Assistant
- ForbedretMigration of the I2C for the clock and LCD to native idf
-
- ForbedretIncrease maximum binary size in local webServer
- RettetRecovery of OCPP transactions to prevent telemetry failures
-
- NyThe configuration of different IDs for Huawei inverters is added.
- ForbedretCorrection of the power reading of the house
- RettetCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- NyPayment Method (V2C Payments)
- NyOCPP Protocol
- ForbedretImprovement of WiFi and Bluetooth stability and reconnection
- RettetReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- RettetCorrection of the maximum file size for updates on Local Server
-
- NyList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- ForbedretReconnection with V2C Cloud after communication loss
- RettetCorrected Shelly and Solax routines
-
- NyShortcuts on the buttons: Lock and Charging Schedule
- NyLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- NyAP mode when the configured WiFi is not available
- ForbedretImprovement in LED error codes
- ForbedretAdaptation for compatibility with Huawei inverters
-
- NyWe added connectivity with Fronius inverters.
- ForbedretImprovements in screen writing and removal of strange characters
- ForbedretImprovement in the transmission of statistics via both WiFi and BLE.
-
- NyError correction x and y
3 af 46
Alva
Aktuel version 1.0.4 · 5 versioner siden august 2026
1.0.4Seneste version
Forbedringer i opladningssessionen og BLE-sikkerhed
- ForbedretHåndtering af opladningssession
- ForbedretStørre sikkerhed BLE
- RettetFejl ved visning af tid og energi i App og Installer Panel
Tidligere versioner 4
-
- RettetFejl med Ingeteam inverter
- RettetFejl med måler Homewizard P1
- RettetFejl med Eastron-måler
- RettetFejl med inverter GoodWe
-
- NyForbindelse til Home Assistant
- NyDaglig nulstillingslogik
- ForbedretLåsning op med nøgleringe og RFID
- ForbedretHåndtering af undtagelser, watchdog og fejlrensning
-
- NyIdentifikation af stik via LED
- ForbedretGenstartlogik
- RettetFejl i payment relateret til tiden
-
- NyQA og fremstillingslogik
- ForbedretHåndtering af sessioner på begge stik
- RettetMindre fejl
3 af 4
Pole Pro
Aktuel version 6.1.3 · 47 versioner siden maj 2023
Har du den tidligere Pole? Se dens opdateringer.
6.1.3Seneste version
- RettetThe charger no longer hangs when rebooting while shutting down the 4G module or dynamic power control
Tidligere versioner 46
- 6.1.2RettetOCPP security event notifications are no longer sent when the connection uses no security profile (profile 0), since some central systems do not support them
-
- RettetCorrected default APN for Wireless Logic SIM cards in Belgium
-
- NyAudible buzzer feedback
- NySupport for registering multiple RFID cards
- NyReading of the installation meter over Modbus RS485 on DC chargers
- NyDynamic power control for DC installations — master and slave units now share and honor the installation power limit
- NyLive display of actual consumption versus offered current on the charger screen
- NyOn-screen guidance walks the user through registering an RFID card
- NyOCPP connection password can now be set from the Cloud and Bluetooth
- NyOCPP now supports security profiles, encrypted TLS connections and Basic Authentication for the central system
- ForbedretLanguage codes standardized to the ISO 639-1 format
- ForbedretReduced volume of messages sent to the Cloud
- ForbedretTime synchronization with the CSMS no longer floods the system log
- ForbedretLog rotation no longer loses history when the disk is full
- ForbedretSafer firmware updates
- ForbedretMore reliable connectivity with automatic failover between Ethernet and 4G
- ForbedretCharges history now loads page by page instead of the whole history at once, for a faster tab
- RettetMeasurer error message now reads clearly
- RettetMore accurate meter-reading validation
- RettetCharge metrics are preserved if a charge is interrupted unexpectedly
- RettetScreen orientation set in configuration is now applied correctly
- RettetFree-charge mode could not be disabled from the installer panel
- RettetDynamic power limit was not applied at tariff/hour boundaries, briefly leaving an installation without a limit
- RettetResolved random service restarts (crashes) caused by network device discovery
-
- ForbedretMore reliable RFID card reading with optimized antenna configuration from first use
- ForbedretImproved stability and responsiveness of the charger's web interface
-
- NyOCPP - Immediate "Preparing" status when receiving a remote start command via OCPP
- NyWiFi disabled by default on devices without WiFi configured
- ForbedretMore reliable RFID card reading with periodic reader reinitialization
- ForbedretBetter cable connection detection and RFID timeout handling
- ForbedretCDP - More stable network device discovery, preventing unnecessary register/unregister cycles
- ForbedretImproved stability when applying configuration changes to the charger
- ForbedretAutomatic migration of legacy pending OCPP messages after update
- ForbedretImproved network handling when switching between manual and automatic IP configuration
- RettetPower factor value conversion for Carlo Gavazzi meters
- RettetImprovements in power measurement accuracy in single-phase or two-phase installations
- RettetOCPP - Smart Charging profiles with defined duration now applied correctly
- RettetOCPP - Local authentication cache overflow that could prevent charging sessions from startIing
- RettetOCPP - OCPP transactions stuck due to unreleased semaphores or null keys
-
- NyEnhanced web server for accessing and editing charger properties
- NyVisual improvements to the web server interface
- NyPersistent price display on screen when the payment system is active
- NyRefined error reporting to the cloud
- NyPower loss detection
- NyWi-Fi disable option from the installer panel
- NyNew buzzer system implementation for white boards
- ForbedretEnhanced RFID calibration with on-screen indicator during the process
- ForbedretRFID reader no longer forcibly activates when OCPP or Payments are active; explicit configuration is respected
- ForbedretRefined cable connect/disconnect notification on each event when payments are active
- ForbedretOptimized RFID card readings
- ForbedretOCPP - Improvements to the offline transaction queue
- ForbedretInternal connection optimization and overall performance improvements
- RettetOCPP - Improved measurement value reporting
- RettetRefined out-of-range measurement error detection
-
- NySoftware-level leak detection enable/disable
- ForbedretAdjusted cooldown time between charges when a leak is detected
- ForbedretOCPP - Improvements to the offline transaction queue
-
- ForbedretWhen OCPP is active, we now show on screen when card passed is not registered in central system.
- RettetAfter update OCPP image and QR is now recovered.
-
- RettetFixed issue where it didn't allow a remote start if a car is connected but not in an active transaction.
- RettetFixed issue in setup interface.
- RettetFixed monophasic Carlo Gavazzi measurer.
- RettetFixed OCPP issue where it wouldn't charge in connector 2 if connector 1 is charging.
-
- ForbedretImproved network features mainly 4G connection.
-
- ForbedretImproved OCPP charge handling.
- ForbedretEnhanced reliability in the smart charging logic.
- ForbedretImproved features when stopping a charge with invalid identifiers.
- ForbedretImproved QR configuration for OCPP.
- ForbedretImproved error handling when sensors or communication components fail.
- ForbedretBetter log management to prevent the device’s storage from filling up.
- ForbedretImproved USB connection features.
- ForbedretImproved RFID calibration and detection display.
- ForbedretImproved features related to Bluetooth.
- ForbedretImproved dynamic power control allowing charge at minimum intensity if master is not detected.
-
- NyManual timezone setting is now available – The user will be able to configure the timezone even if automatic detection is disabled
- NyCreated a contingency page in case app is not running
- NyAdded Italian option for screen
- NyAdded default payment QR to pay without app
- NyAdded new OCPP personalization options - The user can now set 2 QR codes on the screen
- ForbedretImproved updater
- ForbedretImproved network connections
- ForbedretImproved OCPP meter values
- ForbedretImproved discovering devices when dynamic control is active
- ForbedretImproved user interface when updates are in progress
- ForbedretLocal load balancing is now implemented as dynamic control based specific conditions
- ForbedretImproved Bluetooth connection
- ForbedretImproved 4g connections robustness
- ForbedretImproved STM32 lock timings
- ForbedretImproved OCPP now allows external intensity limits
- ForbedretImproved data consumption
- RettetWhen locking a connector while charging, it now sends end charge telemetry correctly
- RettetFixed dynamic control issues
- RettetFixed Carlo Gavazzi power meter
- RettetFixed OCPP LMS, diagnostics, and charging profile clearing
-
- NyAdded shared library
- NyTimezone can be set manually
- NyTime is now synced with Central System if OCPP is active
- ForbedretImproved version/update manager
- ForbedretImproved megabyte conversion of Network Monitor
- ForbedretObtaining timezone now doesn't need to have correct time by using only http urls
- ForbedretMobile usb device name is now obtained dynamically since more usb ports might be used due to TPV
- RettetFixed power control issues
- RettetFixed that when locking connector during a charge it now ends correctly
- RettetRecalculate reboot time when changing time with ble
- RettetWe now show on screen when non registered RFID is passed while OCPP is active
- RettetFixed OCPP freemode rfid issues
- RettetDuplicate StatusNotifications are removed from offline queue
- RettetFixed "infinite" OCPP offline queue issue
-
- NyAPN can now be set manually
- ForbedretWe now show on screen different wifi images depending on how strong signal is to let know the user how good the connection is
- ForbedretGeneral OCPP improvements: we check connection to CS instead of internet for local functioning, we notify a real value now when there's a stop transaction due to power loss, fixed edge cases where connectivity is lost, new ocpp key MaxEVCurrentOffered implemented which limits charge with key instead of smart charging handler, safety mechanisms for ocpp to be more robust
- ForbedretIn 4g, increased rssi range for "excellent" so that it indicates correctly when the reception is good
- ForbedretImproved data consumption
- ForbedretImproved robustness of update
- OpdateretAccess point time increased to 15 minutes
- RettetHandled issues when SSID has whitespace
-
- RettetAccess point improvements.
- RettetFixed QA issues.
-
- NyNew direct method to obtain additional information for Smart Charging.
- NyFixed random reboot time.
- ForbedretFixed unset RFID.
- ForbedretFixed Unknown measurer and made distinction between Unknown measurer and wrongly configured measurer.
- ForbedretOCPP Free mode can be toggled through OCPP keys.
- OpdateretFixed BLE connection with iphone and fixed bluetooth communication error that appeared on app.
- OpdateretNetwork improvements. No interface resets performed at boot which improves bootup time. Network changes now don't require reboot. When changing WIFI settings or ip ethernet settings, it connects after setting it instead of rebooting.
- RettetFixed issue where things on screen were missing in one connector chargers.
- RettetFixed time/timezone issue caused when the date is off by a few days.
- RettetNew property added to toggle if vehicle should be able to charge even though measurers aren't working ( Only works when OCPP, payments or dynamic control isn't enabled ).
-
- NyReflect on screen when charge is paused.
- NyMade reboot time random.
- RettetIncreased SAS token time to live of azure.
-
- NyChanges made to reduce network usage that can be toggled on or off.
- NyFixed case where config is corrupted or missing and would give trouble at startup.
- NyWe now send dead letter if cpu gets too hot and cpu temperature is now logged.
- ForbedretFixed OCPP inverted measurer error.
- ForbedretAdded mechanism to disable or enable Wifi and bluetooth.
- ForbedretWe now report information regarding which type of connection to the internet the e-charger has.
- OpdateretChanged led colors. Switched State A (now white) and State B (now green) colors.
- RettetFixed set threshold values and neopixel leds of Stm32. We can now also obtain control pilot value from Stm32.
- RettetOCPP ConnectionTimeOut value can now be changed on the fly.
- RettetWe now report iccid of sim card is connected. If sim is connected but we can't obtain iccid, we send dead letter.
- RettetFixed log download of http interface.
-
- NyLTE signal is now reflected correctly instead of always showing great signal.
- ForbedretFixed wathdog reboot after doing hard reset.
-
- NyAdded dynamic photovoltaic.
- NyAdded dead letters: measurer fails and kernel error.
- NyProperty "wifi_info" is now reported.
- NyProperty "wifi_static" can be set through ble.
- NyWe can now obtain statistics through direct method.
- NyAdded individual log level for each type of logger.
- NyAdded neopixel led type for stm32.
- NyWe can now set threshold values with stm32 and get control pilot value if debug log of "Stm32" is activated.
- ForbedretImprovements in dynamic control, fabrication, QA, Azure, OCPP, config handling, 4g, access point and stm32.
- ForbedretWe now obtain timezone through url.
- ForbedretRemoved raspbian logo and desktop during boot and added V2C logo.
- ForbedretChanged default language after fabrication from english to spanish.
- OpdateretGeneral bug fixes.
- RettetWhen downgrading we ensure that version we downgrade to is compatible.
-
- NyFixed property "ocpp" change bug.
- ForbedretProperties "powerweekday", "powerweekend" and "phase_map" can be changed through bluetooth.
- ForbedretChanged configuration handling to differentiate internally and externally set variables so that externally set or obtained variables are handled accordingly following the property schemas.
- RettetWe now report wifi_static with static ip configuration.
- RettetStatistics are now saved locally.
-
- ForbedretMeasurer fails are now registered with modbusrtumeasurer.
- ForbedretScreen font bigger for small title.
- RettetValidate configuration with schemas during loading.
-
- NyOCPP authorize can now function by connector.
- NyOCPP WSS connection.
- NyFixed OCPP parent id tag bug.
- NyOCPP meter values now work for 3 phases.
- ForbedretFixed error 3 not appearing on screen.
- ForbedretFixed energy by hour bug.
- ForbedretChanged measurer reading approach for faster reads.
- ForbedretWith dynamic balancing we now show used and available power in frontend.
-
- ForbedretWe show dynamic balancing information on screen.
- ForbedretSimplified handling of configuration.
- ForbedretImproved dynamic balancing.
-
- ForbedretCharger won't reboot if car is in state B and OCPP or Payments is active.
- ForbedretWhen car changes from state C to B, charge information will persist on screen.
- ForbedretCurrent state charge now reports errors.
- ForbedretAdded configuration property validation.
- RettetDirect method to obtain dynamic balancing information.
- RettetGeneral dynamic balancing improvements.
- RettetOCPP improvements.
-
- RettetChanged remaining set_basic_unreported_config to set_basic_config.
-
- NyFix dynamic control bug, powerbytram is not being updated.
- NyFixed bug where whitelist of reported items wasn't being applied and properties weren't being stored in database.
- ForbedretRemoved non-repetitive logger.
- ForbedretChanged access point interface to change apn, with manual mode or mobile operator mode.
- OpdateretRefactored config charge box. Removed BASIC_UNREPORTED and created whitelist of properties to report.
- OpdateretPhase map is now not applied to installation meters.
- RettetFixed payment bug where a charge couldn't be started properly if charge was started with the hose unlocked.
- RettetFix bug with power being zero, dynamic control failing when there are no connectors.
- 3.1.8OpdateretForce WIFI and bluetooth GPIO pins for compute module 4 to work.
- 3.1.7OpdateretForce 4g GPIO pins for compute module 4 to work.
-
- ForbedretWhen we detect that measurers aren't working, we send an unblock command in case there's a charge and the charger has lost power.
- ForbedretCreate section BASIC_UNREPORTED for properties that are used but we don't want to report.
- ForbedretLocked value has persistance when measurers fail.
- RettetWhen we don't receive petitions from chromium we now press enter and Ctrl+F5 if there's anything we need to accept.
-
- RettetChanging WIFI configuration with bluetooth now reboots the charge point.
-
- ForbedretFixed configuration file so that software works with compute module 3 and 4.
- ForbedretChanged reboot logic. It will now reboot if there's a car connected but charge is not allowed.
- RettetChanged payments qr code.
- RettetWe can change log level with property.
-
- RettetMeter values fixed. We now send wh instead of kwh.
-
- NyPause is now reset when it goes back to state A.
- NyShow measurer error as "Error 3" on connector. Behaviour is that connector is locked until it's fixed.
- NySet wire connected again.
- ForbedretFixed general network errors. Improved access point and wifi connectivity.
- RettetFixed error where timezone wasn't set correctly so time appeared incorrectly.
- RettetFixed payment_max_mode timeout bug.
-
- NyFixed power, it was shown in W and is now in Kw.
- ForbedretChange timezone automatically.
- RettetAdded triphasic phoenix contact measurer.
- FjernetFixed removal of grey notification update.
-
- NyWhenever there's an action that provokes rebooting, it will show on screen that it's going to reboot and the cause.
- NyScreen orientation can now be set and depending on parameter.
- NyAdded error message 1 and 2.
- NyBluetooth patch so that bluetooth initialization takes less time.
- NyCreated patch system. System level changes will be applied with this system.
- ForbedretMeasurer refactoring.
- ForbedretImei obtention improved.
- ForbedretInitial version of bluetooth finished: Obtain properties change basic properties, program charge, reboot, add rfid and change wifi.
- ForbedretBoot improvements. "Page not found" isn't shown anymore. Boot is faster. There's a gif indicating that system is starting.
- ForbedretObsolete properties are now deleted automatically so that they aren't reported.
- OpdateretRFID can now function with payments. If RFID is enabled with payments, registered cards will be able to start charges. If RFID is disabled with payments, no card will be able to start a charge.
- RettetLimited number of messages we can send to iothub.
- RettetIn OCPP, fixed sending of meter values. Now sending in wh and not in kwh.
- RettetBoot patch so that GPIO pin initialization takes less time.
- RettetMonophasic measurer Eastron SDM220 implemented.
- RettetImproved robustness on all direct methods.
- RettetFixed bug where it didn't reconnect properly to iothub when it disconnected.
- RettetCreated direct method to put a QR code on the OCPP screen.
- FjernetRemoved wire_connected event telemetry.
- 3.0.9RettetFixed ocpp meter value Energy.Active.Import, when measurer is flipped.
-
- OpdateretFixed error where e-Charger couldn't obtain dns when connected with WIFI.
- RettetFixed local load balancing when one connector was charging. Now when one connector is charging, it will charge at the set intensity.
- 3.0.7RettetFixed ocpp Remote Start Transaction and Remote Stop Transaction.
- 3.0.6RettetFixed error that ocurred in ocpp where it didn't clear properly the idtag when finishing a transaction.
-
- OpdateretChanged access point ip from 192.168.44.1 to 192.168.4.1
- OpdateretWe now report the charger's state instead of the requested vehicle state.
- OpdateretChanged access point master password.
- RettetFixed websocket connection issue with nuitka compilation.
-
- ForbedretImproved update logs.
- 3.0.3NyMoved Version from center to right side and added V. before the version number.
- 3.0.2ForbedretSTM will now detect SPI bus communication errors and will automatically reset.
-
- NyScreen now shows when RFID card is registered.
- NyTop bar now shows version and if access point is accessible.
- NyAccess point interface now has, local load balancing, rfid card registering and log download.
- NyCheck that compute module and board have been created properly.
- ForbedretScreen is now monitored so that it refreshes in the case that no requests have been made after 15 seconds.
- ForbedretQA diagnostic is obtained through access point.
- ForbedretReduced access point available time to 10 minutes.
- RettetFixed bug where connector stopped working properly when sending intensity 0.
-
- NyInitial Version
3 af 46
Denka
Aktuel version 1.1.0 · 10 versioner siden oktober 2025
1.1.0Seneste version
- NyDynamisk effektkontrol mellem flere Denka- og Pole-ladere i samme installation, med automatisk fordeling efter tilgængelig effekt.
- NyEn Denka master kan aflæse installationens måler via RS485 for at fordele hele husets strøm.
- NyDen maksimale effekt for dynamisk kontrol justeres i kW fra V2C-platformen
- NyOCPP: Kompatibilitet med OCPP-sikkerhedsprofiler 0, 1, 2 og 3, og med Basic Auth-godkendelse; OCPP-adgangskoden kan ændres fra skyen, Bluetooth og det lokale web.
- NyOCPP: Interne fejl i opladeren meddeles til CSMS via StatusNotification
- NyOpladningshistorik med detaljerede målinger for hver session (energi pr. time, endelig ladetilstand og køretøjets grænse), pagineret på den lokale web.
- ForbedretKommunikation med strømmodulet er mere stabil, med langt færre fejl under opladning og uden falske fejlmeddelelser ved opstart.
- ForbedretMere pålidelige genstarter af opladeren
- ForbedretHurtigere 4G-forbindelse til netværket, med standard APN og support til Wireless Logic SIM-kort.
- ForbedretNetværk: Betydelige forbedringer i håndteringen af netværksforbindelsen. Automatisk skift mellem Ethernet, WiFi og 4G er mere stabilt, og statisk IP anvendes korrekt.
- ForbedretDiskpladsstyring: logfiler roteres og begrænses uden at miste historik, og det forhindrer hukommelsen i at blive fyldt.
- ForbedretForbedring i valideringen efter en kommunikationsfejl med bilen (SLAC) og betalingssystemet.
- ForbedretBetydelig forbedring af fejlrapportering eller deadletters til de forskellige V2C-platforme
- RettetAfbrydelser af opladning på grund af strømafbrydelse afsluttes og faktureres korrekt, når strømmen vender tilbage.
- RettetOCPP: OCPP-beskedkøen blokeres ikke længere, når serveren svarer med fejl.
- RettetOCPP: Hvis OCPP-serveren afviser starten af en transaktion, stopper opladningen.
- RettetOCPP: Fri tilstand kan nu deaktiveres fra installer panelet.
Tidligere versioner 9
-
- ForbedretKortbetalinger afsluttes, når køretøjet er helt afbrudt, så det opkrævede beløb altid svarer til den leverede energi.
- ForbedretMere pålidelige genstarter i opladere med mobilforbindelse (4G).
- RettetDe intelligente ladeprofiler med varighed sendt via OCPP anvendes nu korrekt.
- RettetOCPP-beskeder, der afventer afsendelse, går ikke længere tabt ved opdatering fra en tidligere version.
- 1.0.5ForbedretLaderen starter korrekt, selv når der ikke er netværksforbindelse tilgængelig.
-
- ForbedretForbindelsen til din OCPP-platform genoprettes automatisk efter en netværksfejl.
- ForbedretRFID-læseren gendannes automatisk efter en læsefejl, uden at det er nødvendigt at genstarte opladeren.
- RettetKonfigurationsændringer kunne stoppe med at blive anvendt efter en intern fejl. Nu anvendes de altid.
- RettetBetalingsterminalen starter ikke længere, når den er deaktiveret.
- 1.0.3RettetOplader kunne stoppe med at reagere efter længere tids drift. Løst.
-
- ForbedretDin konfiguration og dine OCPP-nøgler bevares ved opdatering af opladeren.
- ForbedretFirmware til effektkontrol opdateret for en mere stabil og præcis opladning.
- KompatibilitetDenka tilsluttes den samlede V2C-platform og overgår til den nye versionslinje 1.x, som erstatter serien 0.14.x.
- RettetFejl ved start eller stop af en opladningssession via OCPP.
- RettetOpladeren forsøger ikke længere at oprette forbindelse til skyen uendeligt med udløbne legitimationsoplysninger.
- RettetRFID-kort med numeriske koder blev læst forkert.
- RettetOpdateringer kunne fejle ved overgang fra bestemte versioner.
-
- ForbedretIntelligent opladning: effekt skyder i installatørpanelet.
- ForbedretGenerelle forbedringer i systemets stabilitet og pålidelighed.
- ForbedretGenerelle forbedringer i funktionalitet og stabilitet.
- RettetRettelser i adfærden for intelligent OCPP-opladning.
- RettetRettelse af problemer i håndtering og gendannelse af systemalarmer.
-
- NyStop af opladning ved en specifik SoC
- NyRapportering af status for nødknappen.
- NySlider-element i webserveren.
- NyRapportering af køretøjets SoC og protokol til backend.
- NyDirekte metode `currentcharge` returnerer nu den resterende tid for SoC bulk og fuld.
- NyDirekte metode til at genstarte `autossh`-tjenesten.
- NyKonfiguration af IP-tilstand (offentlig/privat) til 4G-forbindelse.
- ForbedretIntelligent OCPP-opladning.
- ForbedretYdelsesforbedringer.
- ForbedretOpstart af WiFi-modul.
- ForbedretMigrering af HTTP-serveren.
- RettetFejlrettelser i opstartsindstillingerne.
- RettetFejlrettelse i intelligent opladning af OCPP.
- RettetFejlrettelser i webserveren og kommunikationen med hardwaren.
-
- ForbedretForbedring af ydelsen ved afsendelse af DC-parametre.
- RettetRettet SPI-blokeringen.
- RettetFejl i `TimerHandler` med `n_connectors`.
-
- NyIntegration af ændringer i de rapporterede egenskaber.
- NyJustering af RFID-kalibrering fra installationspanelet.
- NyIntegration af den observerede egenskab i det delte bibliotek.
- NyStop af opladning ved en specifik SoC.
- NyHvidliste for opladning efter MAC.
- RettetFejl i `TimerHandler` med `n_connectors`.
- RettetHotfix til stigning i sendte beskeder.
3 af 9
Screen
Aktuel version 2.20 · 66 versioner siden marts 2022
2.20Seneste version
- RettetFixed rfid bug in ocpp.
Tidligere versioner 65
- 2.19RettetFixed rfid card issue in stop transactions.
- 2.18RettetFixed OCPP error where transaction wasn't started when states passed from C to B to C.
- 2.17RettetCB Master: Improved robustness of rfid charge track so that if one connector is fully charged and a different car wants to charge in the other connector it can now charge.
- 2.16RettetCB Master: Fixed bug that wouldn't allow two connectors to charge with payment + RFID.
- 2.15NyCB Master/CB N: Rfid cards can start a charge in payment mode if rfid is enabled.
- 2.14RettetCB Master: We check if measurer is flipped by connector instead of globally.
- 2.13RettetCB Master: We check if measurer is flipped while configuring meter values so that they are sent correctly.
-
- RettetCB N: Fixed cloud iot problem.
- RettetCB Master: Configuration file is restored correctly in the case it's lost. This provoked the page not found error.
- RettetCB Master: Fixed bug where a connector couldn't start a charge when there's a car on the other connector with state B.
- 2.11RettetCB Master: Meter power bug fix.
-
- NyCB N: Car state management D and E.
- ForbedretCB N: General payment improvements.
- ForbedretCB N: In payment method, when you move from status c to b, it does not allow you to reload again until you start a new transaction.
- ForbedretCB N: Improved restart logic when any OCPP configuration is changed.
- ForbedretCB Master: General meter improvements.
- ForbedretPole: Filter to reduce number of logs.
- RettetCB Master: Fixed payment bug that sent the upload permission to the wrong connector.
- RettetCB Master: Fixed bug that when two cars were connected and the B connector was in B status, when the card was swiped, the B was set to charge when the A should be set.
- RettetCB Master: Total energy bug arrangement from version using imported and exported energy.
-
- ForbedretCB Master: Meter restructuring.
- ForbedretOCPP: General improvements in Smart Charging and Tx Profile implemented.
- ForbedretOCPP: Changes due to restructuring of the meter.
- ForbedretOCPP: Restructuring of smart charging. Obtain composite timetable with several profiles.
-
- NyCB Master: Integrated SACI meter and changes so that the serial configuration per connector is not linked.
- ForbedretCB Master: Increased RFID SPI communication speed and lowered RFID gain if noise is detected.
- ForbedretCB Master: Code refactoring
-
- NyOCPP: Starting point for get composite schedule done.
- NyOCPP: Relative profiles are handled but only for Smart Charge profiles where connector id is bigger than 0.
- NyOCPP: Smart Charging Tx Profiles are now accepted.
- NyOCPP: In websocket connection, added "compression=None" since without it it doesn't work on latest Steve version.
- ForbedretCB Master: Refactored serial and made some changes that improve flexibility. We can now have one connector with one type of measurer and the other connector with a different type of measurer.
- ForbedretOCPP: Added next time check mechanism for Smart Charging so we check the next time any limit changes instead of every 30 seconds.
- ForbedretOCPP: General Smart Charge improvements.
- RettetCB Master: Convert to positive the negative values read by Phoenix Contact measurer.
- RettetCB Master: Adjusted the precision of Phoenix Contact monophasic measurers.
- RettetCB N: Fixed bug provoked by changing local load balancing from v2c service.
- RettetOCPP: Change availability of Persistant Data handler is now async so that we can call it without blocking the execution of the ServerController.
- RettetOCPP: Fixed clear charging profiles.
- RettetOCPP: We handle decimal numbers on the Smart Charge profile's limit.
-
- NyCB N: Changes due to Smart Charging
- NyOCPP: Smart Charging starting point fininshed.
- NyOCPP: Smart Charging configuration keys are handled.
- NyOCPP: Smart Charging profiles can be added and will be validated and can also be deleted.
- RettetOCPP, CB N and CB Master: Fixed bug when locked was modified and ocpp was activated but chargepoint isn't connected to any central system.
- RettetCB Master: Fixed bug when OCPP charge is started where if connector 1 was charging, connector 0 couldn't start a charge.
- RettetCB Master: Prevent crash in the case that .versions folder doesn't exist.
- RettetCB Master: Register cards are now added to card cache.
-
- NyPole: Screen now shows when user passes a non registered RFID card.
- ForbedretCB Master: Improvements in update process.
- ForbedretCB Master: Changes so that screen indicates when a non registered RFID card is passed.
- ForbedretCB N: Improvements in update process.
- ForbedretOCPP: GetConfigurationKeys now returns unknown keys and we handle SupportedFileTransferProtocols key.
- ForbedretPole: Romanian identifier moved to position 6 to maintain order language with Trydan.
-
- ForbedretCB Master: We store RFID cards in cache.
- ForbedretCB N: RFID reader improvements. Case where two connectors are plugged in and a card is passed.
- ForbedretCB N: New communication method so that CB master can obtain RFID cards.
- FjernetCB Master: We don't send wifi_info in report anymore and we have removed functions related to wifi_info.
- FjernetCB N: We don't send wifi_info in report anymore.
-
- NyCB N: Static IP configuration through access point.
- ForbedretCB Master: Improvement in connect/disconnect logic. Disconnection is less rigid and we increased network check from 5 seconds to 15 seconds.
- ForbedretCB Master: Increased RFID reader antenna gain.
- ForbedretCB N: When charger reconnects, it will only send report if a property has changed.
- ForbedretCB N: Properties are now only reported when they have changed from previous value.
- RettetCB Master: CWe fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- RettetCB N: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- RettetOCPP: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
-
- ForbedretCB Master: Safeguard so that it doesn't fail when there's a missing network card and we try to obtain data usage.
- ForbedretOCPP: Removed range validation from measurer.
- OpdateretCB Master: Removed range validation from measurer for Carlo Gavazzi and Phoenix Contact measurers.
- RettetCB Master: Fixed energy by hour bug.
-
- ForbedretCB N: We show in log if i2c reconnects.
-
- NyCB Master: Chargebox Cache now stores state of connectivity with V2C service to show it on the screen.
- NyCB N: Chargebox Cache now stores state of connectivity with V2C service.
- NyPole: The screen now shows a cloud icon to indicate connectivity to our cloud.
- ForbedretCB Master: Adjustment in measurer so that it can handle int32 represented as uint.
- ForbedretCB N: Log improvements to not show get_has_internet_connection y and reduce error messages generated when i2c is not working.
- ForbedretCB N: Changes to reduce calls to has_internet_connection to consume less data.
- ForbedretOCPP: We log exception names since sometimes exception errors return empty string.
- ForbedretOCPP: We capture error if there's an error when sending heartbeat.
- ForbedretOCPP: We change client controller so that it's the same as CB N and CB Master.
- RettetCB N: Seconds of timeout now return 0 instead of None if not set.
-
- ForbedretCB Master: Master now sends the balanced intensity when it changes.
- ForbedretCB N: Changed order of what happens when configuration is changed. We first update the value, then we report the changes to Azure and finally we set the cache.
- ForbedretCB N: CB Master now sends balanced intensity instead of CB N probing for change.
- RettetCB Master: Fixed error where RFID stops charge while the other connector is enabled.
- RettetCB Master: Fixed error where RFID card is passed and both connectors have a car plugged in.
- RettetCB N: Fixed bug where changing local load balancing set both connector intensities to 16.
-
- ForbedretCB Master: Change in log system to not show repeated logs.
- ForbedretCB Master: Shared properties are now set in the other connector if they are different on startup.
- ForbedretCB Master: Completely decoupled OCPP from CB N and get_ocpp_config function fixed.
- ForbedretCB Master: Network state is now sent when changed instead of being probed every 30 seconds.
- ForbedretCB N: General improvements of communication between modules and cache.
- ForbedretCB N: Improved stability related with missing configuration.
- ForbedretCB N: Change in log system to not show repeated logs.
- ForbedretCB N: Fixed problem where Chargebox loop would destroy RFID state.
- ForbedretCB N: Fixed OCPP ConnectionTimeout.
- ForbedretCB N: Completely decoupled OCPP from CB N
- ForbedretCB N: Network state is now sent when changed instead of being probed every 30 seconds.
- ForbedretCB N: We only change repository hash if it's different than the current one.
- ForbedretCB N: Updating checks if charger is updated or not and only changes version after it has been updated.
- ForbedretCB N: General improvements of communication between modules.
- ForbedretOCPP: Improved Client Controller traceability.
-
- ForbedretCB Master: Created Cache to decrease the number of requests and communication between modules.
- ForbedretCB Master: Fixed network reset problem.
- ForbedretCB Master: Changes so that Pole can receive all the information it needs in one call.
- ForbedretCB Master: Changes dues to how the measures are now sent.
- ForbedretCB Master: General access point improvements.
- ForbedretCB Master: Improvements due to changes in module communication.
- ForbedretCB N: Created singletons are now thread safe.
- ForbedretCB N: Server Controller is now executed sooner due to being fundamental in correct functioning.
- ForbedretCB N: Changes to take into account CB Master's cache
- ForbedretCB N: Changed way we obtain measures to perform less requests with Client Controller.
- ForbedretCB N: Improvements due to changes in module communication.
- ForbedretOCPP: Created singletons are now thread safe.
- ForbedretOCPP: Completely decoupled from CB N and now only communicates with CB Master.
- ForbedretOCPP: Simplified communication between modules.
- ForbedretOCPP: Improvements due to changes in module communication.
- ForbedretPole: Created singletons are now thread safe.
- ForbedretPole: Completely decoupled CB N and we obtain all information needed in one call to CB Master.
- ForbedretPole: Improvements due to changes in module communication.
-
- ForbedretCB Master: The charger now limits the number of messages that appear in the case that there's a range validation fail of a measure.
- ForbedretCB N: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- ForbedretCB N: Restart Server Controller mechanism.
- ForbedretOCPP: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- ForbedretOCPP: Restart async Server Controller mechanism.
- ForbedretPole: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- RettetOCPP: If there's an error handling a request, we won't add it to the offline queue.
- RettetOCPP: Include thread and sys libraries.
-
- ForbedretCB N: When rebooting, we check module communication server.
- ForbedretCB N: Decoupled concept of connector id and measurer address.
- ForbedretCB Master: When rebooting, we check module communication server.
- ForbedretCB Master: Decoupled concept of connector id and measurer address.
- ForbedretCB Master: Fixed error in Phoenix Contact measurer.
- ForbedretPole: ZMQ integrated to improve communication.
-
- ForbedretPole: Improvement to let the user know when to connect the vehicle.
- ForbedretPole: Screen now reflects if charger has only one connector.
- ForbedretCB Master: Changed SSID format so that it's the same as Trydan's format.
-
- ForbedretOCPP: Added measurer range validation.
- ForbedretCB Master: Added measurer range validation.
- OpdateretOCPP: AuthorizeRemoteTxRequests is now a read and write configuration key.
- RettetOCPP: Fixed problem with repeated logs.
- RettetCB Master: Fixed problem with repeated logs.
- RettetCB N: Fixed problem with repeated logs.
-
- ForbedretCB N: Handled special case of change intensity.
-
- NyCB Master: Access point logic fininshed.
- NyOCPP: Data validation when configuration is changed.
- NyOCPP: Charger can now handle multiple transactions offline.
- ForbedretCB N: If OCPP is on, we disable payment mode.
-
- ForbedretOCPP: Reset function improved. Corresponding Status Notification is sent.
-
- ForbedretCB N: General stability improvements.
- ForbedretCB N: Changed payment method approach.
- ForbedretCB Master: Changed payment method approach.
- ForbedretCB Master: Improved robustness in the case the access point software is not installed.
- ForbedretPole: Improvements due to payment method.
-
- NyOCPP: Change availability validates connector.
- NyCB Master: Finished Access point.
- ForbedretCB Master: Changed compressed file formats from gzip to gz
- ForbedretCB Master: Force backup when restarting.
-
- NyCB N: Allow to change intensity, when i2c is failing.
- NyCB Master: Implemented most of the access point server functionalities.
- RettetCB Master: Fixed OCPP measurer error that ocurred when all selected measures in Meter Values returned 0.
- 1.4.3NyCB Master: Initial version of the access point server.
-
- ForbedretCB N: Changes to improve Pole software.
- ForbedretPole: Changes to simplify view logic.
- RettetCB Master: If payment mode is active, charger won't allow to charge with RFID card.
- RettetPole: Removed sourceMappingUrl to prevent 404 error when there's no internet.
- 1.4.1RettetCB N: Payment mode changed since payload format for server has changed.
- 1.4.0NyPole: Changes in screen software that reflects payment mode, blocking connectors and OCPP.
-
- RettetOCPP: Charger won't send Authorize if passed RFID card is already used in a transaction.
- 1.3.23ForbedretOCPP: We store RFID cards in lower caps to improve robustness.
-
- ForbedretOCPP: Improved robustness of RFID cards stored in the Local Authorization list.
-
- ForbedretOCPP: Improved Local Authorization logic.
-
- RettetCB Master: Fixed wifilist sending format.
-
- NyCB N: We report information regarding wifi_info. Direct method to ask for the SSIDs the raspberry pi detects.
- 1.3.18ForbedretOCPP: Improved authorization cache handler.
-
- ForbedretOCPP: Improved handling of measurer values.
-
- ForbedretOCPP: Improved handling of configuration keys.
-
- OpdateretCB N: Payment mode with duration and timers.
-
- ForbedretOCPP: Improved MeterValues handler.
- 1.3.13NyOCPP: Finished Local Authorization List profile.
- 1.3.12ForbedretOCPP: Log Improvements.
- 1.3.11RettetOCPP: Fixed bug that wouldn't send Authorize Request when passing the RFID card.
-
- NyOCPP: Basic implementation of OCPP profiles: FirmwareManagement, LocalAuthListManagement, Reservation and SmartCharging.
- 1.3.9ForbedretCB Master: Fixed RFID card reading with Wiegand reader for cards that have a 0 on the left side. Example of cards that failed: 32:0a:2c:23, 41:00:32:12.
-
- OpdateretOCPP: Availability isn't managed by OCPP anymore. It is handled exclusively by property locked.
- 1.3.7ForbedretCB N: If charger is blocked, led blinks won't be sent.
- 1.3.6NyCB N: Payment Mode finished with start and stop.
- 1.3.5ForbedretOCPP: Clear Cache can only be performed when all connectors are in the OCPP state Available.
-
- ForbedretOCPP: Changes so that availability can be changed from CB N.
-
- ForbedretCB Master: OCPP module can now ask for Status Notification.
- OpdateretOCPP: The charger the different possible OCPP states in the Status Notification.
- 1.3.2ForbedretOCPP: We can now set configuration parameters for safeguard.
- 1.3.1ForbedretOCPP: Change availability is now completely functional. It changes to inoperative during a charge and availability changes the locked value.
- 1.3.0RettetOCPP: Changed way we obtain measurer data for OCPP.
- 1.2.0RettetOCPP: Temporary fix for Place to plug since OCPP library can't handle unknown keys.
- 1.1.0RettetOCPP: Fixed _available_connectors error.
-
- NyOCPP.
- NyScreen.
- NyPole.
- NyCB Master.
- NyCB N.
3 af 65
V2C Cloud-app
Aktuel version 3.3.2 · 30 versioner siden februar 2023
3.3.2Seneste version
- NyNew dark mode built into the app: all screens adapt correctly to the dark mode of your phone.
- NyNew appearance screen (Settings > User data > Appearance) to choose between Automatic mode (follows the phone), Light or Dark.
- NyNew QR and barcode reader, faster and more reliable, to identify the e-Charger in Payments and during pairing.
- NyClearer error messages when signing in incorrectly.
- ForbedretCleaner app startup, without the initial white flash.
- ForbedretFixed double margins and grey bars on Android 14 and earlier when leaving and returning to the application.
- ForbedretLighter app: significant reduction in its size thanks to image and code optimization on Android.
- KompatibilitetThe app now requires Android 8.0 or later.
- Opdateret"No injection or isolated" mode in charging profiles: the minimum power becomes 300 W, since a lower battery discharge is insufficient, with a warning if a lower value is entered.
- RettetFixed an issue where newly created charging profiles could disappear when refreshing the main screen.
- RettetFixed the scheduled charging modal (Classic and EcoCharging), which now adjusts to display all its content without needing to scroll.
Tidligere versioner 29
-
- NyNew V2C in-house notification system, more reliable, and request for notification permission in recent versions of Android.
- NyNew languages available: Polish, Lithuanian, Simplified Chinese and Czech.
- NyNew favorite e-Chargers list in Payments: save your usual e-Chargers under any name you like to start charging in a single step.
- NyThe V2C e-Chargers shown on the map already allow you to start charging directly through V2C Payments.
- NyYou can filter the map by V2C e-Chargers.
- NyNew compatible inverters for dynamic control: SolPlanet, Hoymiles and Huawei with direct WiFi connection (available for Trydan version 2.5.2 or higher).
- NyHome battery management extended to more inverters: Sigenergy (from version 2.5.1), and GoodWe, SolarEdge and SolPlanet (from version 2.5.2).
- NyNew alert on Pole Pro when the cable meter does not respond (Error 3), available from version 6.1.0.
- NyNew explanation of how mixed charging mode works in Special options.
- NyThe main screen now shows the name of the charging profile in use.
- NyThe statistics now correctly show negative costs.
- NyThe virtual assistant button can be docked to the side of the screen and restored whenever it is needed.
- NyNew explanatory message when sharing an e-Charger with an email address that does not have a V2C account.
- NyVisual improvements across the entire application: system bars, top margins and adaptation to different mobile device models.
- ForbedretFaster app startup and lower resource consumption.
- ForbedretNew date picker design for the global statistics and for each e-Charger.
- ForbedretImproved Bluetooth connection stability, preventing freezes when connecting, when checking the power settings and when opening the e-Charger options.
- ForbedretGreater session stability: unexpected logouts are avoided after keeping the app in the background for a long time, and lock-ups when signing in on iPhone are prevented.
- ForbedretPole Pro network configuration, now more secure: validation of the WiFi network and static IP, the APN does not accept accents, and the presentation of the 4G SIM card has been improved.
- ForbedretCorrections to tariff names and tariff display, plus new colors to better distinguish periods when editing the electricity tariff.
- ForbedretInternal optimization to reduce the size of the application.
- OpdateretV2C Payments: now only the e-Charger administrator can activate it, and when doing so, the location of the charging point is selected.
- OpdateretV2C Payments: new warning before continuing if the e-Charger has no Internet connection or does not allow charging at that time.
- OpdateretThe charging priority between the car and the battery is only shown when the installation includes an inverter or the Huawei EMMA meter.
- OpdateretCompatibility with the new language format in the latest firmware versions of the e-Chargers.
- RettetFixed the statistics list on iPhone, which could appear cut off.
- RettetCorrected the minimum power displayed when it is below 1 kW on Denka.
- RettetFixed an internet connection warning that was being displayed without cause.
- RettetFixed an error when selecting car models whose name contains the # symbol.
- FjernetThe app no longer requests background location permission, as it is no longer necessary.
-
- NyImprovements to V2C Assistant: a new information screen to better explain how the assistant works.
- NyImprovements in Dynamic Control: Shelly Pro devices are also compatible with V3.
- NyImprovements to battery configuration: the interface of the option that prevents the charger from discharging the home battery has been improved, making its operation clearer.
- NyNew compatibility with Sigenergy: added Sigenergy as a compatible inverter for battery control in the charging profiles.
- NyNew Solarman inverter discovery: added a system to automatically detect available Solarman devices during setup in Dynamic Control.
- NySolarman discovery via Bluetooth and Wi-Fi: the new system lets you perform discovery using the available connections.
- NyImprovements to Solarman configuration: discovered devices are now displayed individually to make them easier to select and configure.
- ForbedretImprovements to scheduled charging: optimized the operation of the time indicator during scheduled charging sessions.
- ForbedretNew error handling: improved the behavior of certain app calls when status errors occur.
- ForbedretImprovements in Oasys: optimized data persistence to correctly retain configuration settings.
- ForbedretImprovements to AutoCharge management: updated the name and presentation of the AutoCharge feature.
- ForbedretImprovements to sharing: additional information added to the sharing screen to make it easier to understand.
- ForbedretVisual improvements in the Solarman discovery flow: improved states, animations, messages and confirmations during the search process.
- ForbedretGeneral improvements: the application has been optimized and various bugs have been fixed to deliver a more stable experience.
- OpdateretImprovements to charging profiles: maximum configurable power increased to 12 kW for single-phase installations and 36 kW for three-phase installations to make configuration easier for French users.
- OpdateretNew support area: access to the support area has been updated.
- RettetImprovements to charger sharing: fixed an issue that could cause errors when sharing a charger.
- RettetMap improvements: Added token and updated the access used for the maps to ensure their correct operation.
- RettetImprovements to inverter configuration: fixed several cases related to the configuration and validation of connection parameters.
- RettetStability improvements: several issues detected during the final review have been fixed, such as the change of Charging type in special options not being performed correctly via Bluetooth.
-
- NyNew password for OCPP in the advanced options for a more secure configuration.
- NyNew notice when location permission is not granted, to make device setup easier.
- NyNew reminder in the chatbot to allow movement when necessary.
- NyImproved authentication stability, preventing simultaneous token requests and enhancing internal token management.
- NyA safety timeout has been added when obtaining the token to prevent blocking in exceptional cases.
- NyNew Sigenergy configuration guide via Modbus TCP to simplify commissioning of the inverter.
- NyNew link to the Sigenergy setup guide when selecting this inverter in dynamic power control.
- NyCompatibility with Sigenergy in dynamic power control, correctly identifying it as an inverter.
- NyNew compatible models of Azzurro and SofarSolar inverters.
- NyNew notice to restart the Alva when necessary to complete the configuration correctly.
- NyMore precise Bluetooth error messages when it is not possible to connect to the charger.
- NyNew Ingeteam inverter models and validation of connection data to simplify their configuration.
- NySelection of charging type available in Special options (Available for Trydan version 2.5.0 or higher).
- ForbedretImprovements to the Bluetooth connection of the Alva, with faster and more stable communication.
- ForbedretThe chatbot now offers more useful recommendations, with questions tailored to your setup and situation.
- ForbedretImprovements to smartphone configuration and translation of the texts related to pairing.
- ForbedretImprovements to the Dutch translations to deliver a more consistent experience.
- ForbedretGreater control over sending statistics when retrieving them via Bluetooth, preventing issues when the data is corrupted or incomplete.
- ForbedretInternal optimization of the app to reduce its size and improve compatibility with the latest Android recommendations.
- ForbedretImproved sensitivity of the charging profiles to avoid changing the segment when clicking.
- ForbedretImprovement to adjust charging profile times with precision, if desired.
- ForbedretImproved management of the dynamic control data for the Alva, correcting errors during its query.
- ForbedretGreater robustness when synchronising the time via Bluetooth on the Trydan.
- OpdateretThe battery charging priority message in the charging profiles has been updated to make it clearer.
- RettetImproved precision on some sliders, fixing data submission when they are clicked directly.
- RettetFix for an empty card in the special options.
-
- NyShow prioritising household battery charging in the charging profiles (version 2.5.0 or higher).
- NyAdd detailed information on battery priority in charging profiles.
- NyAdded EMMA as a compatible inverter to prevent battery discharge.
- NyIdle fee added in Payments.
- NyAdded COM address to the EMMA meter.
- NyConnection type sent to ALVA.
- RettetFixed a bug when opening the pop-ups.
-
- NyAdded integrated AI chatbot.
- NyAdded charging session completion log under Special options for Trydans (firmware version 2.5.0 or later).
- NyAdded new custom tariff by time periods.
- NyOasys chart data displayed as on the website.
- NyAdded new "Battery level" field to the Oasys chart.
- NyAdded a search feature for when a user has many chargers (more than 10).
- NyPagination for retrieving large quantities of cards and eKeys via Bluetooth.
- NyThe maximum charging current limit message for the connectors on Alvas will be 640A because they have two sockets.
- NyImprovements to the RFID design, pagination, search engine and differentiation by type.
- NyDisplay the version number the firmware will be updated to.
- NyChecking whether Bluetooth permission is enabled and notifying the user.
- NyLimited-current message on the screen for 16-ampere models.
- NyChint available by version for Denka and Pole chargers.
- NyNew GIF added to show battery discharge and photovoltaic production.
- ForbedretNew and improved UX for charging profiles.
- ForbedretImproved UX for the Energy Tariff screen, for custom tariffs.
- ForbedretImprovements and optimization of calls made during a Payments transaction.
- ForbedretGeneral Bluetooth improvements.
- ForbedretImproved design of the User Management screen and the option for the administrator to remove the charger from there.
- ForbedretMaximum charging current limited for the connectors and improved user experience.
- RettetAvoid negative values in Oasys charts.
- RettetFixed inconsistent colours in the Oasys charts.
- RettetImproved UX of the password change button to prevent multiple clicks.
- RettetFaster app startup when accessed without network coverage.
-
- NyBattery discharge management notice for Ingeteam in its external application.
- NyThe administrator can see whether the charger is being managed by an installer. Other users can see who the administrator is.
- NyNew label in the capacity data.
- NyDetailed explanations have been added to all the battery fields.
- NyUpdate to version 2.5.0 to include compatibility with battery discharge.
- NySafety alerts have been added to warn the user to be careful when pressing certain sensitive functions.
- NyGrid management has been added to the Oasys settings.
- ForbedretImprovement across all Oasys screens
- ForbedretImprovements in the app (v2c): The energy tariff has been added to Oasys.
- OpdateretValidation of RFID and eKey length (at least 3 characters).
- OpdateretThe Ingeteam and EMMA inverters have been removed from the list of compatible inverters for battery discharge.
- RettetThe fix addressed an error when displaying the message "Evitar descarga de batería".
- RettetFixed an error when saving the settings with the Goodwe inverter.
- RettetFixed an error where the main method kept running in a loop even after leaving the screen.
- RettetThe power limit issue on Denka has been resolved (hidden, but completed).
- RettetCharging current has been permanently hidden on the payment screen.
- RettetA possible security vulnerability has been resolved.
-
- NyThere is a charge in progress indicated in the statistics.
- NyNow the names of the RFID cards appear in the statistics.
- NyFinished main battery screens with real data.
- NyAdded checkbox to prevent battery discharge from version 2.4.7 onwards for some inverters
- ForbedretGreater robustness in the firmware update display (The update option will only appear if the current version is strictly lower than the latest stable version in production).
- OpdateretAllow editors to modify the energy tariff.
- RettetFixed error in the GIF without FV.
-
- NySeparation of Azurro and Sofar Solar inverters.
- NyPrevention of overly long codes in RFID or eKeys and improvement of the user experience.
- NyNew Azurro inverter.
- NyImproved fluency in the map menus.
- NyIncreased modal size to improve data display.
- NyNew improved statistics design.
- NyAdded new Huawei EMMA meter.
- NyInverter type renamed to Sunny SMA.
- NyAdded vehicle registration plate.
- NyAdded the type of solar PV energy used in your charging profiles at each moment in the GIF
- NyPagination completed for RFID on Denka and Pole Pro
- NyNew Fronius types limited to versions above 2.4.2
- ForbedretImproved display of electric vehicle details.
- ForbedretImprovement in the Italian translations.
- ForbedretGeneral translation improvement.
- ForbedretUsability improvements and repositioning of buttons in EcoCharging
- ForbedretImprovement in Payments data sampling
- RettetFixed the autocharge status check (it should not be performed in that case).
- RettetFixed an error in the electric vehicle data.
- RettetToken endpoint update across the entire app.
- RettetFixed an error on the options screen with MAC addresses on Poles.
- RettetImproved compatibility with large-screen devices.
- RettetiOS safe-area settings.
- RettetFixed an end-to-end issue on Android 15.
- RettetUpdating end-to-end obsolete APIs.
- RettetAdded safe areas to avoid overlaps with system bars.
- RettetCritical security vulnerability fixed in Android.
- RettetHidden charge target if the version doesn't include the required update (2.4.3)
- RettetFixed a bug when trying to update firmware over local Wi-Fi.
-
- NyAdded information on the cost during charging for users with photovoltaic systems.
- NyMapbox token change for map search.
- ForbedretBluetooth connection acceleration.
- ForbedretImproved design of the BLE pairing.
- ForbedretRefactoring
- ForbedretBluetooth connectivity optimization on iOS.
- ForbedretContextual translation improvements across all languages.
- OpdateretChange in the location of the V2C Business Panel, now in the main settings.
- RettetFixed a bug when configuring V2C Business Panel.
- RettetFixed a bug in the charge target checkbox.
- RettetFixed a bug on the RFID/eKeys screen for the Alva units.
- RettetFixed a bug where the map menus overlapped the notch on iPhones.
- FjernetSecondary unit update hidden
-
- NyFinished and fully functional widget on Android and iOS.
- NyAdded AI chatbot for frequently asked questions.
- NyExplanation and notice for the Linky meter.
- NyNew protocols for Goodwe inverter.
- NyNew links for the new "Informational videos".
- NyNew screen for pairing chargers via Bluetooth proximity.
- NyNew screen to configure the time zone.
- NyAdded Alva to the model lineup
- NyNew option to link your e-Charger with a company.
- NyTwo new subtypes for the Fronius inverter.
- NyNew tariff for France: EDF Tempo
- ForbedretBest UX design for classic scheduled charging.
- ForbedretImproved data transmission and alerts for dynamic power control.
- ForbedretRefactoring of part of the code.
- ForbedretImprovement of some incorrect labels in all languages.
- ForbedretImproved the display of the emergency button pressed alert on Denkas.
- ForbedretImproved display of more specific errors when sharing a charger.
- OpdateretLibrary updates on iOS.
- OpdateretNew design for adding information about your electric vehicle
- RettetStatistics use the start date as the reference, so that they appear within a given time interval.
- RettetFixed a bug when entering an empty SSID on Poles and on iOS.
- RettetGerman translations corrected.
- RettetFixed the map bug on iPhones.
- RettetFixed a bug in the display of costs in the statistics.
-
- NyAdded alert for emergency button activated on Denka.
- NyAutocharge feature: List of authorized vehicles for Denka.
- NyNew flow in the photovoltaic diagram.
- NyShare charger directly via email.
- NyImprovement in the logs for uploading statistics manually.
- ForbedretImprovement of the charging skeleton on the home screen
- ForbedretBetter explanation of current per phase
- ForbedretImprovement of Italian translations
- ForbedretRemoved orientation restriction for greater compatibility with some tablets
- OpdateretLibrary update
- OpdateretFirebase library updated for greater security.
- OpdateretCorrect order of the static IP configuration properties.
- RettetBug fix when updating EcoCharging with a specific time.
-
- NyAdded G2 type to the Goodwe inverter
- NyAdded charging limit on Denka units
- NyBattery capacity display on Denka.
- NyRemaining charging time on Denka
- ForbedretMore space in the bottom menu for some devices
- ForbedretImproved bottom menu view for users with very large font sizes
- OpdateretChanges to the Solis inverter type
- OpdateretChange in the statistics sample: I now take endCharge into account, as the server does.
- OpdateretChanges to server calls, without the trailing slash
- Opdateret"Wake-up mode" hidden
- OpdateretHidden 'Common registers' type on DEYE inverter
- OpdateretGPS is not an essential requirement to download the App.
- OpdateretIt is no longer necessary to specify the user's area in the electric vehicle settings.
- RettetFixed a bug when retrieving data in Special Options
- RettetMinor bug fixes
-
- NyAllow SIM card data to be recharged without the e-Charger connected
- NyNew warning messages for sensitive functions
- Forbedret"Overall stability improvement"
- OpdateretChange of the property name to term_resistor
- RettetThe bottom menu no longer overlaps the information
-
- ForbedretTotal improvement of Portuguese translations
- ForbedretTotal improvement of French translations
- ForbedretPartial improvement of German translations
- RettetFixed a bug when changing the power on Denka units.
- RettetBetter error handling on the map
-
- NyPhase map adapted for Trydan
- NyAllow secondary chargers to change the maximum and minimum current
- NyAccess restriction to charging profiles for non-master chargers, and separation of current limits
- NyChange and notice for DEYE inverter types
- NyAdded BUS termination resistor view to dynamic control
- NyImproved data loading on the network screen
- NyLocal load balancing for Trydan, show BUS termination resistor status
- NyImproved robustness in sending statistics over Bluetooth
- NyNew home screen (splash screen) configured and optimized
- NyImproved app restart without fully closing it; new finished designs with customizable background screen
- NyNew logic on the device's home screen
- NyNew data upload design on the home screen
- NyFinished supplier filter
- NyAdded skeletons (modern data loading) on the main screens
- NyNew server calls, transaction grouping and pagination
- NyNew server calls: listing and downloading invoices by type
- NyAdded a clock next to the time in statistics, changed € to a generic currency symbol, and the statistics list now appears under general statistics.
- NyNew DEYE type and added new Linky meter
- NyApp translated into Basque and refactored to make it easier to add new languages
- NyNew energy tariffs added
- NyAdded new screen to confirm free payments
- NyAdded another type for the Goodwe inverter
- NyWarning in the e-Charger restart message
- NyNew tariffs calculate their price correctly on the charging screen
- ForbedretDesign improvements and enhancements across all iPhone screens with Dynamic Island
- ForbedretImprovements to the statistics display
- ForbedretImproved the display of statistics over long time ranges
- ForbedretImprovement in the skeletons
- ForbedretInverters and meters, sorted alphabetically
- ForbedretCompetitive EcoCharging savings price and the ability to resume from any state
- ForbedretEnhancements to the device's main screen
- ForbedretImprovements in LetMeCharge
- OpdateretRefactoring of the main screens
- OpdateretSending the battery capacity as a number instead of a text string
- OpdateretChanged server calls to the new transactions
- RettetHide Modification Type Portugal
- RettetFixed current limits on the main screen and redesigned/refactored the settings screen
- RettetFixed the numeric input type on some inputs that allowed text entry.
- RettetFixed a bug when selecting charging profiles: it always started on "weekdays".
- RettetFixed a bug in the photovoltaic GIF.
- RettetFix in the token refresh
- RettetFixed a bug when displaying the firmware version
- RettetFixed a bug when changing the cache
- Rettet"Do not show the lock if the charger is not connected (Wi-Fi or Bluetooth) and fixed a bug when displaying the power level"
- RettetAvoid screen lock due to internet connection in statistics
- RettetFixed a bug when displaying statistics
- RettetFixed bug in dynamic control, undefined IP
- RettetFixed minor bugs
- FjernetRemoval of unused screens
- FjernetRemoved the card borders
- FjernetRemoved unnecessary elements
- FjernetRemoved the current limit per phase when the charger is single-phase
-
- NyNew permissions and restrictions based on e-Charger model and user role
- NyMaximum and minimum power limit on Denka
- NyAnimation without chargers adapted to the new design
- NyNew dynamic control for Trydans with version higher than 2.3.0
- NyAdded map (Coming very soon)
- NyNew design with bottom menu
- ForbedretCode refactoring for better maintainability
- ForbedretImproved reconnection between main screens
-
- OpdateretiOS SDK update to allow publishing.
- RettetFixed a bug in the creation of the EcoCharging plan.
- RettetFixed font size on some screens.
- RettetFixed a bug when selecting static control on the Pole Pro.
- RettetFixed a bug when requesting location on Android 14.
- FjernetFull removal of the load-balancing app between sockets (it is now included in the dynamic control operation).
-
- NySerial number added to the Enphase inverter.
- NyStats chart added in EcoCharging.
- NyRefactoring of the application and new way of displaying dynamic control according to the version and model of the e-Charger.
- NyAddition of Italian language to Pole Pro.
- NyCo-owners can edit their credit card.
- NyDo not allow configuring charging profiles on a device that is not the Master.
- ForbedretEnhanced Bluetooth calls for Pole Pro.
- ForbedretImproved robustness when retrieving statistics via Bluetooth.
- ForbedretServer Call Refactoring.
- ForbedretTranslation improvements.
- ForbedretGreater robustness when changing a scheduled charge.
- ForbedretPerformance improvement at application startup.
- ForbedretImprovements to the connection setup screen.
- RettetFixed the invoice PDF download.
- RettetFixed a blank screen error when configuring the connection.
- RettetFixed error when updating via local Wi-Fi.
- RettetInconsistency fixed with OCPP: it appeared as enabled when it was not enabled via Bluetooth.
- RettetError fixed when displaying cost in charts with photovoltaic energy statistics.
- FjernetElimination of load balancing between sockets on Poles; it now balances automatically through dynamic power control.
-
- NyAllow deleting e-Charger if Cloud Dynamic Control is enabled and you are not the Administrator
- ForbedretAvoid excessive calls on the main screen with multiple e-Chargers
- ForbedretTroubleshooting errors when editing RFID cards or Bluetooth key fobs
- OpdateretUpdate the Denka's minimum current to 1kW
- OpdateretLibrary updates and performance optimisation
- OpdateretAllow power levels above 100 kW in charging profiles
- RettetFixed a bug when uploading statistics via Bluetooth.
- RettetFixed a bug when retrieving data from Shelly Pro in dynamic control
- RettetFixed a bug when adding the first charging profile via Bluetooth
- RettetFixed a bug when downloading invoices on any mobile device
- RettetFixed white screen bug when adding a Pole
-
- NyNew feature: added "Wake-up mode".
- NyTurn off notifications when you log out.
- ForbedretImprovement in optimization, higher speed.
- RettetFixed a bug when retrieving statistics via Bluetooth with photovoltaic discrimination.
- RettetFixed a bug when updating the reported property when changes are made to a property.
-
- NyStatistics show the cost with solar PV applied, and savings are also displayed.
- NyOption to change the LED brightness
- NyAbility to set a different COM address for the DDSU666-H meter
- NyAdded Fronius inverter types
- NyNew e-Charger Denka added
- NyNew tariffs added (Indexed and OMIE)
- NyNew properties of the Denka e-Charger added
- NyNew inverters added
- NyActivated EcoCharging alert
- NyAdded EcoCharging plan view
- NyDenka feature integration
- NyNow notifications are differentiated by type and can be selected according to the user's preference.
- NyTranslations of all new screens.
- NySome options are disabled when cloud dynamic control is enabled.
- NyWarning message when changing the OCPP settings.
- NyAdded Deye inverter types to dynamic control
- NyAdded date filter to transactions.
- NyAdded new Shelly pro meter to dynamic power control
- ForbedretImproved French translations.
- OpdateretFirmware update to version 2.2.7
- OpdateretEmail verification submission form updated
- OpdateretText changes for 4G and Ethernet.
- RettetFixed the error when displaying battery charging in the GIF.
- RettetFixed a bug on the RFID screen that would get stuck, loading indefinitely.
- RettetChanged the text on monthly invoices and fixed the default month on invoices.
- RettetFixed error when the server fails to request the MAC, and when the JSON fails to request the reported value via Bluetooth.
-
- ForbedretTranslation improvements
- Rettet"Fixed the issue with the time change when editing hours in charging profiles"
-
- NyAdded the types for the Greenheiss inverter and the SAJ inverter.
- NyAdded an ion-range to the power selection of the charging profiles
- NyNew connectivity options for Trydan Pro (4G and Ethernet)
- NyReboot notice for the e-Charger when Wi-Fi is configured
- NyStatistics refresh for greater robustness
- NyExtension of time to add an e-Key for greater reliability
- ForbedretImprove the translations
- ForbedretImproved user messages on e-Keys
- OpdateretRFID cards and e-Keys can be added, edited and deleted without needing to activate them.
- RettetFixed a bug where the scheduled time did not appear on Pole Pro.
- RettetFixed a time zone bug in charging profiles (it mainly occurred in Portugal).
-
- NyNew tutorial pop-up screen created for cases where something needs to be explained to the user in greater detail.
- NyError handling in charging profiles to alert the user if something has not been saved correctly.
- NyPhotovoltaic aggregated into the charging profiles for Pole Pro.
- NyImproved Bluetooth localization on some phones, and we show an error message if the Bluetooth connection fails.
- NyAdded COM 1 and COM 11 types to the Huawei Chint meter in dynamic power control.
- NyHidden the photovoltaic GIF for the Pole Pro models.
- NyOption to add a free COM address for the Huawei inverter.
- NyAdded the ability to configure a static IP for Pole Pro.
- NyAdded a new message in the GIF for when there is no photovoltaic production.
- NyNew translations added.
- NyAdded user information about configuring the static IP on Pole Pro.
- NyAdded 'car topic' to configure MQTT in dynamic control.
- ForbedretImprovement in the dictionary format (internal code).
- ForbedretImprovement in saving charging profiles: it is no longer impossible to save charging profiles with more than 5 time slots via Bluetooth.
- ForbedretOverall performance improvement of the application and code optimization.
- OpdateretNew per-device notification handling instead of per-account, and unsubscription from them when the pairing is removed.
- OpdateretSwitched the Bluetooth ID storage from localStorage to sessionStorage for more robust connection handling.
- OpdateretName change from "V2C Meter 2.0" to "V2C ControlBox".
- RettetFixed bug sending MQTT username and password in dynamic control.
- RettetFixed a bug when displaying statistics that started at 00:00.
- RettetFixed a bug when switching languages: the save button was sometimes not displayed.
- RettetFixed a bug in the Shelly type submission in dynamic control.
-
- NyShare charger available in 'User management'.
- NyV2C Payments process opens within the same app for a more convenient payment experience for the user. (It does not work if the user has the MI Browser set as the default on their mobile phone; it does work for Google Chrome and Safari.)
- NyAdded a notice to the user to resume charging if V2C Payments is enabled.
- NyNew languages available for Trydan.
- NyDynamic power control and charging profiles available on Pole Pro.
- NyAdded Trydan compatibility with Enphase inverter.
- NyAdded Trydan compatibility with P1 meter.
- NyAdded Trydan compatibility with Modbus feeder meter.
- NyAdded new additional configuration options for MQTT.
- NyDifferentiation of types for Solis inverter (With or Without batteries).
- NyAdded the Romanian language to Trydan.
- NyAdded phase map configuration on Pole Pro under Special options.
- NyImplementation of DeadLetters for logging background user errors.
- NyPower tiers with current limit for Pole Pro.
- NyAdded no-meter option in dynamic control for Pole Pro.
- NyImportant notices when changing dynamic control to improve UX.
- NyNew screen, list of available slaves for Pole Pro when acting as Master.
- ForbedretFaster charging from the configuration while offline.
- ForbedretImportant improvement in the stability of the Bluetooth key fobs, both over WiFi and over Bluetooth.
- ForbedretImproved design of the Special Options.
- ForbedretImproved Bluetooth search and location on iOS.
- ForbedretImproved some Bluetooth methods.
- ForbedretUX improvement when changing the e-Charger name.
- ForbedretImproves Bluetooth stability on Pole Pro.
- OpdateretChange from kW to W for battery discharge.
- OpdateretChanged "Dynamic control configuration" to "Charging profiles".
- OpdateretName change: the Bluetooth key fobs are now called e-Keys.
- OpdateretIncreased Bluetooth scan time on the main screen.
- RettetFixed a bug when refreshing without any chargers.
- RettetFixed a bug where the mobile back button did not work correctly on some screens.
- RettetUpdating the RFID card or key fob list when activating them.
- RettetImproved invoice view in English.
- RettetDo not allow deleting e-Charger if the user is offline.
- RettetAllow the charger to be enabled from inside with the self-locking feature activated.
- FjernetDeleting the Parking message in V2C Payments when the parking is free, to avoid confusion.
-
- NyAdded an alternative SolarEdge meter to the Dynamic Control.
- NyAdded confirmation before updating Firmware.
- NyMore and better translations.
- NyError handling in Payments.
- NyAdded new Google Home image.
- ForbedretImproved connectivity and Wi-Fi reception on the home screen.
- ForbedretOffline configuration screen will load faster.
- OpdateretConsolidate RFID card activation and editing on a single screen. (The same applies to Bluetooth key fobs.)
- OpdateretChanged Huawei-type to COM address.
- OpdateretSend to the home screen after restarting the e-Charger.
- OpdateretChange when we make a free transaction in Payments.
- Opdateret"Do not allow changes to Payments when there is no Internet connection."
- RettetFixed a bug that asked for the Huawei type for any meter or inverter.
- RettetFixed a bug when displaying statistics for charging sessions carried out between 22:00 and 00:00.
- RettetFixed a bug when entering an empty power tier name.
- RettetFixed a bug in Payments with the free rate.
- RettetFixed a time zone bug in the statistics.
- Rettet"Fixed small bugs."
-
- NyThere is now a new type of photovoltaic system in the power tiers, called "No injection or isolated".
- NyThe power tiers are stored on the server and in the cache to ensure correct operation on any device and in any situation. (With internet, without internet, with Bluetooth, etc.)
- NyAdded Bluetooth key fobs for the Trydan.
- NyAdded informative messages to the user for a better user experience.
- NyThe token is only requested once per minute or when entering the application, and it is cached for better speed (previously it was requested with every HTTP call).
- NyAdded the option to restart the e-Charger in "Special options".
- NyGoogle Home is now available, and the corresponding information has been added to the app.
- NyStronger error control in some posts for greater transparency for users.
- ForbedretImprovement in the retrieval and upload of statistics via Bluetooth.
- ForbedretImproved stability of some Bluetooth connections
- ForbedretImproved the design of the Payments screens.
- OpdateretThe value will not be shown in the solar PV GIF if the data is 0 or null.
- OpdateretIf the device language is Basque, the app will default to Spanish (previously it defaulted to English).
- RettetFixed the photovoltaic GIF that would freeze on some iOS devices.
- RettetMinor bug fixes.
-
- NyAdded the IP address to the WiFi information.
- NyTake the parking cost into account after charging with V2C Payments.
- NyShelly static IP explanation.
- NyReal-time updates of payment status on the main screen.
- NyNew inverters added.
- NyChange in Shelly inverter rates.
- ForbedretImproved Bluetooth reconnection on the main screen on iOS.
- ForbedretDifferentiated the option between swiping and clicking to lock the charger.
- ForbedretImproved Bluetooth stability for certain calls that sometimes failed.
- OpdateretLarger button for payments without chargers.
- OpdateretCorrected new QR format.
- OpdateretAbility to modify OCPP via Bluetooth on Trydan.
- OpdateretDesign change on the V2C Payments screen
- RettetFixed push notifications on iOS.
- RettetFixed the Google login issue on iOS when sharing the charger.
- RettetFixed error with the PVPC 2 format.
- RettetFixed an error when modifying tariffs.
- RettetFixed an error in the download of payment invoices.
-
- NyNew inverters added
- Ny"New notice if you have successfully obtained the statistics via Bluetooth"
- NyNow location is only required with Bluetooth turned on
- NyTake the batteries into account in the photovoltaic GIF
- ForbedretGreater consistency in data sending and receiving via Bluetooth
- ForbedretDon't let the user enter an empty RFID name and new translations.
- RettetFixed the retrieval of statistics via Bluetooth.
- RettetFixed the bug with the photovoltaic GIFs
- RettetFix for the notifications
3 af 29
V2C Cloud-webportal
Aktuel version 4.1.1 · 45 versioner siden december 2020
4.1.1Seneste version
- NyActivate or deactivate the default rate for each e-Charger in Payments.
- NyEcocharging plan available for Oasys batteries.
- ForbedretUpload your own invoices in the Invoices section of Payments.
Tidligere versioner 44
-
- NyMandatory location for e-Chargers in Payments.
- NyMake the charger public from Payments so that it is visible on other platforms.
- NyAssign a different rate to each group in Payments.
- NyMonthly fee rate within Collective Charging.
- ForbedretNew design for the Payments platform.
- 4.0.4ForbedretNew way to configure the Ingeteam inverter.
-
- NyItalian tariffs.
- 4.0.2NyRates by periods.
- 4.0.1NyBattery prioritization in charging profiles.
-
- ForbedretNew design of the portal v2c.cloud.
- ForbedretSupport for viewing on mobile devices.
-
- NyNew Sofar Solar inverter.
-
- NySelect time zone, manually or automatically.
- NyNew Huawei Emma inverter.
- NyNew Azzurro inverter.
- ForbedretIncrease in code size on RFID cards.
-
- ForbedretNew rates added.
-
- ForbedretNew PDFs in Spanish and English in Payments.
- RettetCharging power limit on Denka.
-
- NyCharging stops upon reaching the selected percentage for Denka models.
- NyTPV icon.
- NyPossibility to see more chargers on the main page.
- NyCalculator in Payments rates.
- ForbedretSelection of the auto-lock time for Trydan with version 2.3.25 or higher.
-
- ForbedretChange in design when adding/modifying rates in Payments.
-
- RettetBug fixes in cloud installation.
-
- RettetFixing errors in RFID cards.
-
- NyCatalan language added.
- RettetBug fixes in the cloud power control.
- 3.2.12RettetFixing errors in power control profiles and in the meter list.
-
- OpdateretImprovement in RFID cards to manually support 14 characters.
- 3.2.10RettetError fixing
-
- NyFiltering by status (online/offline) available for e-Chargers.
- ForbedretVisualization of the e-Chargers version on the homepage.
- 3.2.8ForbedretGrouping of types in Payments invoices.
-
- RettetFix when filtering date range in Payments and dashboard.
-
- ForbedretIncrease in the maximum number of power control profiles.
-
- NyItalian language in Pole Pro.
- OpdateretOptional OCPP customization properties in Pole Pro.
-
- ForbedretCreation of more intuitive power profiles.
-
- ForbedretImproved visual aspect when creating power profiles for cloud power control.
- OpdateretGreater reduction in the cloud power control zoom and the option to reset zoom changed to center the installation.
-
- ForbedretAbility to download statistics as a .xlsx file.
- RettetFixed various minor bugs.
-
- ForbedretAdded a waiting indicator when saving an installation in cloud power control.
- OpdateretModified text and color according to the state of the e-Charger in cloud power control.
- RettetImages of e-Chargers in installation view in cloud power control.
-
- NyRight-click menu in cloud power control.
- NySelect, copy, paste, duplicate, and delete multiple elements in cloud power control.
- ForbedretMove and zoom in on an installation with the mouse wheel in cloud power control.
- OpdateretThe upper power limit in the charging profiles has been modified.
- RettetFixed various minor bugs.
-
- NyAdded Basque language
- ForbedretPerformance improvement on the e-Chargers page and control panel
- OpdateretNew way to display the details of the e-Chargers
- RettetFixed various minor bugs.
-
- NyRight-click to delete an active item during the creation or editing of an installation in cloud power control.
- NyThe customer's email appears when downloading the transaction table from V2C Payments.
- ForbedretImproved interaction between elements during the creation or editing of an installation in cloud power control to avoid impossibilities.
- OpdateretV2C Payments transaction table sorted by date in descending order.
- RettetFixed various minor bugs.
-
- OpdateretNew validations when creating rates in V2C Payments.
- RettetFixed errors in displaying the power control settings.
- 3.1.0NyNew design of the portal v2c.cloud
-
- ForbedretGreater speed also on the main screen, and in the charging of the user's e-Chargers.
- ForbedretChange the configuration to parallel for faster data loading.
- OpdateretAll the inverters and meters available in the App have been added.
- RettetFixing various bugs, updating and improving translations and user experience.
-
- NyAdded list of wifi networks
- NyAdded hamburger menu for better visualization of the canvas in smart charging.
- NyAdded shared user management
- NyAdded translations
- NyAdded user help for CSV download
- NyRomanian language added
- NyAdded the partner creation form
- ForbedretCharging acceleration of the e-Chargers
- OpdateretChange the navbar to black
- RettetFixed issue with the smart charging zoom.
- 2.0.0NyAdded Smart charging
-
- NyAdded invitations to customers
- OpdateretImage tags also translated
-
- NyAdded to the main screen charger in payment mode or not with icon
- NyNew translations added
- OpdateretNew design of the main screen
- RettetFixed bug with colors changing upon logout
- RettetInvoice issue, the correct one was not downloading.
- RettetTransactions are now resolved quickly, and there is a change in the format of the rates.
- RettetResolved issue in payments with the tabs that were moving.
- RettetFixed 'Update software' and bug with charger statuses.
-
- NyAdded Payments option
- NyInvoices added in the new tab and can be downloaded.
- NyAdded flat rate or customized rate when adding a rate
- ForbedretImprovement in device charging
- ForbedretImprovement of designs to make them responsive on all devices
-
- NyAdded plus charger
- OpdateretAdd charger in the same way as in the app
- OpdateretWe show fewer decimals in the tables.
- OpdateretChange the design of the side menu and some labels.
- OpdateretRemoved donuts and changed design on the screen up button.
- RettetBug fixes and design improvements
- RettetFix letter design and login and main screen
-
- NyAdded software update in the configuration
- NyCost calculation according to the rate
- RettetChanging the rate is done correctly.
- RettetControlled error changing WiFi without connection
- RettetEnergy rate calculation is done correctly.
-
- NyYou can now log in by pressing enter.
- ForbedretCharging screen improves without connection
- OpdateretChange of design if there is no connection
- RettetDynamic power control is adjusted properly.
- RettetGlobal statistics are now updating correctly.
- RettetFixed main screen hours
- RettetCSV data download in the correct format
-
- NyNew, more specific errors indicated for the user and installers.
- RettetBug fixes when linking devices.
-
- ForbedretImprovements in website performance.
- RettetFunctionality bugs fixed.
-
- NyStyle improvements.
- NyCreation of the V2C website.
- RettetBug fixes.
3 af 44