Ενημερώσεις Trydan και Trydan Pro
Βελτιώνουμε συνεχώς τις λειτουργίες των φορτιστών Trydan και Trydan Pro. Εδώ θα βρείτε την πιο πρόσφατη έκδοση του e-Charger μας και τις τελευταίες ενημερώσεις που έχουν πραγματοποιηθεί.
Τελευταία έκδοση
2.5.2
Trydan και Trydan Pro
2.5.2Τελευταία έκδοση
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- ΝέοDirect query of OCPP status
- ΝέοNew Solplanet/AISWEI Inverter
- ΝέοNew Hoymiles Inverter
- ΝέοBattery discharge control: GoodWe, SolarEdge
- ΝέοHuawei inverters direct connection without Dongle
- ΝέοUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- ΝέοNew "Unlimited" Wake-up 5 mode available from the LCD
- ΝέοImprovements in Bluetooth cybersecurity
- ΒελτίωσηFixes in FV mode + Minimum power
- ΒελτίωσηOCPP: duplicate BootNotifications are avoided
- ΒελτίωσηSecurity menu lock during vehicle charging
- ΒελτίωσηImprovements for Linky-LORA
Προηγούμενες εκδόσεις 46
-
- ΝέοCompatibility with SigEnergy inverters
- ΝέοNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- ΝέοWiFi connection for Deye inverters via Elfin
- ΝέοExpansion to 105 RFID cards
- ΝέοPAP/CHAP authentication for 4G connection
- ΝέοMore stable OCPP connections
- ΒελτίωσηReading the P1 and Victron meters is more reliable in the event of communication failures.
- ΒελτίωσηStability of mixed three-phase charging
- ΒελτίωσηError reporting and diagnostic system
- ΒελτίωσηImprovement of home battery charging priority in PV charging modes
-
- ΝέοManagement of home battery discharge in charging profiles
- ΝέοUnlocking the Trydan by smartphone proximity
- ΝέοNew models of SofarSolar and Azzurro inverters
- ΝέοAdded current and voltage per phase in Home Assistant and Modbus API.
- ΝέοWiFi connection in Deye inverters
- ΝέοIncrease of up to 80 RFID cards
- ΝέοBattery compatibility in SolarEdge inverters
- ΝέοScroll text for long texts
- ΒελτίωσηOptimization of Ethernet network interface
- ΒελτίωσηImprovements in the Modbus TCP client
- ΒελτίωσηImprovements in mixed three-phase charging
- ΒελτίωσηImprovement of texts in German
- ΒελτίωσηIncrease the voltage range of the installation from the control panel.
-
- ΔιόρθωσηOCPP password bug
- ΔιόρθωσηProblems connecting to CSMS after restarts
-
- ΝέοTarget charge kWh
- ΝέοNew SMA Sunny Boy model
- ΝέοNew Fronius model with battery
- ΝέοSelect Modbus API address ID
- ΝέοNew Deye models
- ΝέοSofar Solar inverters
- ΝέοAzzurro inverters
- ΝέοSelect MID address
- ΝέοEMMA Huawei
- ΝέοSecurity Profile 2 OCPP (wss + auth + CA cert)
- ΝέοPrivate 4G SIMs in OCPP
- ΝέοOcppFreeMode
- ΝέοOCPP internal queue messages
- ΒελτίωσηTime synchronization
- ΒελτίωσηPower plate measurements 1.0
- ΒελτίωσηWiFi improvements
- ΔιόρθωσηExclusive mode bug with batteries
- ΔιόρθωσηCoordinate "ContractedPower" and load profiles with HTTP API.
- ΔιόρθωσηImprove RFID errors
- ΔιόρθωσηMixed load bug
- ΔιόρθωσηBug photovoltaic mode + minimum
- ΔιόρθωσηBug statistics without FV via BLE
-
- ΝέοMIFARE Ultralight RFID cards
- ΒελτίωσηMore robust OTA update
- ΔιόρθωσηBug management autolock with payments mode
- ΔιόρθωσηBug in payments mode with RFID
-
- ΒελτίωσηInstallation problem readings
- ΒελτίωσηImprovement in BYD mode
- ΔιόρθωσηBug with Wibeee inverter
-
- ΝέοObtain firmware version via Modbus
- ΝέοGoodWe via Modbus TCP
- ΝέοOCPP: FirmwareManagement
- ΝέοAutolock
- ΝέοNew MID models
- ΝέοNew wake-up modes
- ΝέοAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- ΝέοLinky meter for French meters
- ΝέοModbus termination resistance
- ΝέοReading individual properties HTTP API
- ΝέοTurn off/Turn on logo and LCD from HTTP API
- ΕνημέρωσηImprovements in dynamic control
- ΕνημέρωσηImprovement in Sungrow inverter measurements
- ΕνημέρωσηImprovements in the OTA update
- ΕνημέρωσηImprovements in the button panel menu
- ΕνημέρωσηNew Deye models
- ΕνημέρωσηOCPP: improvement in MeterValues
- ΕνημέρωσηOCPP: send StatusNotification "Faulted" with errors and warnings
- ΕνημέρωσηOCPP: publish current version
- ΕνημέρωσηOCPP: BootNotification timeout
- ΕνημέρωσηNew NTP servers
- ΕνημέρωσηImproved WI-FI scanning
- ΕνημέρωσηImprovement in P1 meter
- ΕνημέρωσηImprovement in remote logs
- ΕνημέρωσηIoT call limitation per charger
- ΕνημέρωσηImprove RAM memory
- ΕνημέρωσηStability via Ethernet
- ΕνημέρωσηCorrected translations
- ΔιόρθωσηError "Waiting for Power"
- ΔιόρθωσηBug with RFID cards with long names
- ΔιόρθωσηBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- ΔιόρθωσηImprove statistics via Bluetooth
- ΔιόρθωσηLocal balancing improvements for up to 10 devices
- ΔιόρθωσηBug when sending RFID code in the statistics
- ΔιόρθωσηBug with Exclusive PV mode and batteries
-
- ΝέοStatic power control is added (only with Trydan consumption).
- ΝέοMixed charging adapts to European rates.
- ΝέοPower control programming with phase limits is allowed.
- ΝέοThe power control adapts to European countries with phase current limits.
- ΕνημέρωσηThe power control algorithm has been modified step by step to apply PID modulation.
- ΕνημέρωσηThe static power control between sockets or between e-Chargers is improved.
- ΔιόρθωσηThe failure of remote records is avoided when a disconnection occurs.
-
- ΔιόρθωσηBug DTSU666-G meters
-
- ΒελτίωσηImprovement in Wake Mode
- ΔιόρθωσηFixed bug when changing the port in MQTT.
-
- ΝέοEcoCharging to schedule charging automatically during the cheapest daylight hours.
- ΝέοTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- ΝέοCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- ΝέοFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- ΝέοImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- ΝέοImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- ΝέοOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- ΝέοOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- ΝέοOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- ΒελτίωσηReading the power value of the batteries in Goodwe EH and ET inverters.
- ΒελτίωσηSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- ΒελτίωσηImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- ΒελτίωσηImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- ΒελτίωσηImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- ΒελτίωσηOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- ΒελτίωσηOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- ΒελτίωσηOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- ΔιόρθωσηOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- ΝέοVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- ΝέοSAJ hybrid inverters
- ΝέοShelly Pro meters
- ΝέοInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- ΝέοDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- ΝέοTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- ΒελτίωσηLeak detection
- ΒελτίωσηMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- ΒελτίωσηModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- ΒελτίωσηVisualization of the RFID card authentication process in OCPP
- ΒελτίωσηThe memory used in JSON and OCPP goes to the SPI RAM.
- ΔιόρθωσηInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- ΔιόρθωσηCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- ΝέοAdaptation of OCPP to new central systems
- ΝέοNew Deye models
- ΒελτίωσηImprovements in the direction detection of the V2C 2.0 control box
- ΔιόρθωσηLEDs blink when there is no connection.
- ΔιόρθωσηBug in Greenheiss hybrid
-
- ΝέοDeye / Turbo Energy three-phase
- ΝέοShelly Pro EM and Shelly Pro 3EM (Beta)
- ΒελτίωσηShow text on bidirectional meters
- ΒελτίωσηReadings with Fronius and DTSU666
- ΒελτίωσηReaction times in the leak detector
- ΒελτίωσηShow Waiting for Charge in Stop mode
- ΔιόρθωσηBug with French language
- ΔιόρθωσηRaise the HTTP server via Ethernet
- ΔιόρθωσηBug in payments
- ΔιόρθωσηRead-only in the OCPP properties
- ΔιόρθωσηSave power segments via Bluetooth on some devices.
- ΔιόρθωσηShelly Portugal measurements
-
- ΝέοLive Remote Logs
- ΒελτίωσηShow stop due to dynamic control
- ΒελτίωσηRestarts due to reconnection attempts
- ΒελτίωσηQA Protocol
- ΒελτίωσηVoltage and Temperature Reading Power PCB
- ΔιόρθωσηNaN measurement on some meters
- ΔιόρθωσηError in Home Wizard readings
-
- ΒελτίωσηPerformance improvement and future compatibility between Trydan and Trydan Pro.
- ΒελτίωσηImprovements in OCPP protocol
- ΒελτίωσηImprovements in the QA process
- ΒελτίωσηImprovement in memory usage
- ΒελτίωσηMore robust statistics
-
- ΝέοNetworks with WPA3 security
- ΝέοNew BLE (NimBLE)
- Νέοe-keys via BLE connection
- ΝέοNew language: Romanian
- ΝέοEnphase version 7.x.x, Solis with batteries
- ΝέοAdaptation of the i2c power board
- ΒελτίωσηAzure library update
- ΒελτίωσηUpdate of ESP-IDF and Arduino-ESP32 libraries
- ΒελτίωσηInvestor communication via WiFi connection without Internet
- ΒελτίωσηImprovement in V2C 2.0 meter refresh rate
- ΒελτίωσηImprovement in OCPP, adaptation to support disconnections
- ΒελτίωσηImprovement in key fob detection
- ΒελτίωσηImproved refresh rate
- ΒελτίωσηImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- ΔιόρθωσηModification of Deye/Turbo Energy batteries
- ΔιόρθωσηCustomizable MQTT topics and username/password
- ΔιόρθωσηDisconnection statistics report
- ΔιόρθωσηBLE compatibility of iPhone
- ΔιόρθωσηOperation of V2C 2.0 meter at night
- ΔιόρθωσηAutomatic date and time
- ΔιόρθωσηInteraction with Megane
-
- ΝέοBug in photovoltaic three-phase mode
- ΒελτίωσηWiFi recovery routine
-
- ΝέοMixed three-phase charging available through the physical menu.
- ΝέοAdded three-phase MID Meter
- ΝέοInclusion of server ID 2 in SolarEdge inverters
- ΝέοAdded Modbus registers with the meter measurement.
- ΝέοHTTP commands added for integration with HA.
- ΝέοEnphase Envoy Inverter (beta) (versions 5.x.x)
- ΝέοV2C 2.0 error detection of clamp not connected
- ΝέοMQTT Slave with user/password authentication and customizable topics (beta)
- ΒελτίωσηImprovement of the WatchDog to prevent system freezing
- ΒελτίωσηImprovement of nearby WiFi scanning
- ΒελτίωσηBluetoothLE service reconnection protocol
- ΒελτίωσηWiFi optimization IRAM and affinity with the Azure task
- ΒελτίωσηReconnection protocol in the absence of WiFi
- ΒελτίωσηFactory reset
- ΒελτίωσηThe error code and LED interface
- ΒελτίωσηImproved the Isolated Installation mode and zero feed-in.
- ΒελτίωσηReduction in cut-off time through dynamic control to 1 min
- ΒελτίωσηAutomatic detection of time and time zone
- ΒελτίωσηThe optimization and refactoring of the measurement slaves
- ΒελτίωσηUnlocking with BLE Tag
- ΔιόρθωσηOccasional LCD freezes
- ΔιόρθωσηFalse positives from the leak detector
- ΔιόρθωσηProblems with the MID Meter
- ΔιόρθωσηLED error during update
- ΔιόρθωσηDefault value for JSON type variables
- ΔιόρθωσηMeasurement at 0 in Deye/TurboEnergy Inverter
- ΔιόρθωσηVisual errors and local balancing address assignment
-
- ΝέοSolar Discount on Shortcuts
- ΝέοDeye/TurboEnergy Inverter Beta
- ΝέοPhoenix Contact meter
- ΝέοCarlo Gavazzi meter
- ΒελτίωσηOCPP improvements and tested in MONTA
- ΒελτίωσηProblems in dynamic control
- ΒελτίωσηReconnections and WiFi Stability
- ΔιόρθωσηFrozen LCD
-
- ΝέοIsolated Mode in Photovoltaic Modes
- ΝέοDutch, Danish, and Valencian
- ΝέοLeak sensor modes (installer menu)
- ΝέοMID meter (installer menu)
- ΝέοNew Ingeteam protocol (Battery Management)
- ΝέοThree-phase meters DTSU666
- ΝέοSDM three-phase meters
- ΒελτίωσηLocal Balancing Protocol and priorities
- ΒελτίωσηDetection of ports and hosts in OCPP
- ΒελτίωσηStable version of SMA Sunny Boy
- ΒελτίωσηPortuguese version of Wibeee
- ΒελτίωσηFronius measuring home consumption
- ΔιόρθωσηUnexpected locks and unlocks
- ΔιόρθωσηWhite blinking in locked mode removed
- ΔιόρθωσηError selecting the slaves in beta
- ΔιόρθωσηError of SolarEdge three-phase inverters
-
- ΝέοChanges and improvements in calibration
-
- ΒελτίωσηCalibration adapted to the new hardware
- ΔιόρθωσηData analysis in Kostal Piko fixed
-
- ΝέοLocal balancing between Trydans available via WiFi or wired connection.
- ΝέοSDM-220/320/120 (Tested with the Eastron brand)
- ΝέοDDSU-666 Meter (Common in Huawei installations)
- ΝέοSelf-calibrating without the need for a car
- ΝέοManual hour available
- ΝέοHTTP requests to manage the logs
- ΝέοNew Modbus Registers
- ΝέοGreenheiss inverters
- ΝέοSAJ inverters
- ΝέοWired Solis inverters
- ΝέοResponse time in configurable dynamic control
- ΒελτίωσηConfigurable installation voltage
- ΒελτίωσηNew manufacturing process
- ΒελτίωσηIncluded Shelly three-phase but without FV measurement.
- ΒελτίωσηCar consumption via MQTT fixed
- ΒελτίωσηImproved and more intuitive physical menu
- ΣυμβατότηταBeta models of Goodwe: the battery measurement is canceled.
- ΔιόρθωσηBug in Max and Min Intensity via Modbus fixed.
- ΔιόρθωσηFalse positives in the leak detector fixed
-
- ΝέοPrevention of conflicts between slaves and the cloud
- ΔιόρθωσηGoodWe conflicts and Azure initialization
- ΔιόρθωσηFix in Shelly with only three-phase.
-
- ΒελτίωσηPending statistics will be sent only once.
- ΒελτίωσηShelly 3EM three-phase and modification for Portugal
- ΔιόρθωσηModbus Multiple Readings Hotfix
-
- ΝέοNew Modbus registers
- ΝέοRFID reader in alpha version
- ΝέοSolaX X3 híbrido compatible
- ΝέοAvailable calibration and shortcuts via WiFi
- ΒελτίωσηOCPP Improvements
- ΒελτίωσηImprovement in WiFi scanning
- ΒελτίωσηImprovement in reconnection routines
- ΔιόρθωσηBluetooth timezone failure
- ΔιόρθωσηError in Trydan synchronization - APP
- ΔιόρθωσηStatic IP configuration in Trydan via WiFi
- ΔιόρθωσηError saving Modbus parameters
-
- ΝέοNew method for calibrating communication with the car
- ΝέοBeta version of the GoodWe ET/EH/BT/BH
- ΒελτίωσηImprovement in the communication analysis with the car
-
- ΝέοAuto lock after 60 seconds without a car (shortcut)
- ΝέοModification for Three-Phase Installations in Portugal for V2C 2.0
- ΝέοKostal Piko is added.
- ΒελτίωσηReformulation of the Dynamic Control Algorithm
- ΒελτίωσηImprovement in the refresh rate of Huawei inverters
- ΒελτίωσηSolarEdge stable (Meter measuring export)
- ΒελτίωσηStable version of GoodWe
- ΒελτίωσηDetection of state D and E according to protocol
- ΒελτίωσηImproved QA process
- ΔιόρθωσηStored in memory after writings via Modbus TCP and RTU
- ΔιόρθωσηBug in the FV measurements and peaks resolved for V2C 2.0
-
- ΝέοGoodWe in beta version
- ΝέοCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- ΒελτίωσηMQTT in stable version
- ΒελτίωσηVictron in stable version
- ΒελτίωσηImproved connection with Azure
-
- ΝέοMQTT slave beta version
- ΒελτίωσηDetection of power direction in Wibeee
- ΔιόρθωσηThe Victron and SolarEdge inverters were bringing down the system.
-
- ΝέοSolarEdge inverter added (Beta)
- ΝέοVictron inverter added (Beta)
- ΝέοAutolock enabled in shortcut (60 s)
- ΝέοAutomatic time zone detection
- ΝέοAlternative meter for car consumption (RS485)
- ΝέοFV Exclusive with configurable variation
- ΝέοNew Languages (French, Italian, and German)
- ΔιόρθωσηFixed error in minimum power mode.
-
- ΒελτίωσηImprovements in Dynamic Control with batteries
- ΒελτίωσηImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- ΔιόρθωσηResolved the IP configuration issues for Trydan with WiFi and BLE.
- ΔιόρθωσηResolved the issues with the IP configuration of Shelly BLE.
-
- ΝέοInclusion of the Wibeee meter
- ΝέοSlave 2.0 compatible with Type 1 and Type 2 installation
- ΝέοChange in the established connection blinking
- ΝέοDetection and measurement of bifacial load
- ΝέοImprovement in the collection and transmission of charging data
- ΝέοAlternative Meter Phoenix Contact (ModbusRTU)
- ΝέοModbusRTU in Trydan (simultaneous slave and master)
- ΝέοStatic IP configuration in Trydan
- ΝέοPossibility to select the IP in Shelly
- ΒελτίωσηInclusion of maximum intensity in OCPP (as a property)
- ΒελτίωσηImprovement in the reading of Solax inverters
- ΒελτίωσηInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- ΒελτίωσηModbusRTU and Modbus TCP server in Trydan
- ΕνημέρωσηFirst stable version of Ingeteam
- ΕνημέρωσηImprovement in the speed of the leak detector
-
- ΔιόρθωσηError solution in manufacturing when saving WiFi
-
- ΝέοEliminate false communication errors from the slaves.
- ΝέοSave the first Shelly that Trydan connects to.
- ΕνημέρωσηWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- ΒελτίωσηImprovement in telemetry recovery in OCPP
- ΒελτίωσηImprovement in scanning nearby WiFi networks
-
- ΝέοInternal Azure ping every 15 seconds to detect disconnections.
- ΝέοSeparate reconnections to avoid crashing the server.
- ΝέοOCPP adaptation to work with Home Assistant
- ΒελτίωσηMigration of the I2C for the clock and LCD to native idf
-
- ΒελτίωσηIncrease maximum binary size in local webServer
- ΔιόρθωσηRecovery of OCPP transactions to prevent telemetry failures
-
- ΝέοThe configuration of different IDs for Huawei inverters is added.
- ΒελτίωσηCorrection of the power reading of the house
- ΔιόρθωσηCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- ΝέοPayment Method (V2C Payments)
- ΝέοOCPP Protocol
- ΒελτίωσηImprovement of WiFi and Bluetooth stability and reconnection
- ΔιόρθωσηReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- ΔιόρθωσηCorrection of the maximum file size for updates on Local Server
-
- ΝέοList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- ΒελτίωσηReconnection with V2C Cloud after communication loss
- ΔιόρθωσηCorrected Shelly and Solax routines
-
- ΝέοShortcuts on the buttons: Lock and Charging Schedule
- ΝέοLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- ΝέοAP mode when the configured WiFi is not available
- ΒελτίωσηImprovement in LED error codes
- ΒελτίωσηAdaptation for compatibility with Huawei inverters
-
- ΝέοWe added connectivity with Fronius inverters.
- ΒελτίωσηImprovements in screen writing and removal of strange characters
- ΒελτίωσηImprovement in the transmission of statistics via both WiFi and BLE.
-
- ΝέοError correction x and y
6 από 46