Updates für Screen
Wir arbeiten kontinuierlich daran, die Funktionen von Screen zu verbessern. Hier finden sich die neueste Version unserer Ladesäule und die zuletzt veröffentlichten Updates.
Neueste Version
2.20
Screen
2.20Neueste Version
- BehobenFixed rfid bug in ocpp.
Frühere Versionen 65
- 2.19BehobenFixed rfid card issue in stop transactions.
- 2.18BehobenFixed OCPP error where transaction wasn't started when states passed from C to B to C.
- 2.17BehobenCB Master: Improved robustness of rfid charge track so that if one connector is fully charged and a different car wants to charge in the other connector it can now charge.
- 2.16BehobenCB Master: Fixed bug that wouldn't allow two connectors to charge with payment + RFID.
- 2.15NeuCB Master/CB N: Rfid cards can start a charge in payment mode if rfid is enabled.
- 2.14BehobenCB Master: We check if measurer is flipped by connector instead of globally.
- 2.13BehobenCB Master: We check if measurer is flipped while configuring meter values so that they are sent correctly.
-
- BehobenCB N: Fixed cloud iot problem.
- BehobenCB Master: Configuration file is restored correctly in the case it's lost. This provoked the page not found error.
- BehobenCB Master: Fixed bug where a connector couldn't start a charge when there's a car on the other connector with state B.
- 2.11BehobenCB Master: Meter power bug fix.
-
- NeuCB N: Car state management D and E.
- VerbessertCB N: General payment improvements.
- VerbessertCB N: In payment method, when you move from status c to b, it does not allow you to reload again until you start a new transaction.
- VerbessertCB N: Improved restart logic when any OCPP configuration is changed.
- VerbessertCB Master: General meter improvements.
- VerbessertPole: Filter to reduce number of logs.
- BehobenCB Master: Fixed payment bug that sent the upload permission to the wrong connector.
- BehobenCB Master: Fixed bug that when two cars were connected and the B connector was in B status, when the card was swiped, the B was set to charge when the A should be set.
- BehobenCB Master: Total energy bug arrangement from version using imported and exported energy.
-
- VerbessertCB Master: Meter restructuring.
- VerbessertOCPP: General improvements in Smart Charging and Tx Profile implemented.
- VerbessertOCPP: Changes due to restructuring of the meter.
- VerbessertOCPP: Restructuring of smart charging. Obtain composite timetable with several profiles.
-
- NeuCB Master: Integrated SACI meter and changes so that the serial configuration per connector is not linked.
- VerbessertCB Master: Increased RFID SPI communication speed and lowered RFID gain if noise is detected.
- VerbessertCB Master: Code refactoring
-
- NeuOCPP: Starting point for get composite schedule done.
- NeuOCPP: Relative profiles are handled but only for Smart Charge profiles where connector id is bigger than 0.
- NeuOCPP: Smart Charging Tx Profiles are now accepted.
- NeuOCPP: In websocket connection, added "compression=None" since without it it doesn't work on latest Steve version.
- VerbessertCB Master: Refactored serial and made some changes that improve flexibility. We can now have one connector with one type of measurer and the other connector with a different type of measurer.
- VerbessertOCPP: Added next time check mechanism for Smart Charging so we check the next time any limit changes instead of every 30 seconds.
- VerbessertOCPP: General Smart Charge improvements.
- BehobenCB Master: Convert to positive the negative values read by Phoenix Contact measurer.
- BehobenCB Master: Adjusted the precision of Phoenix Contact monophasic measurers.
- BehobenCB N: Fixed bug provoked by changing local load balancing from v2c service.
- BehobenOCPP: Change availability of Persistant Data handler is now async so that we can call it without blocking the execution of the ServerController.
- BehobenOCPP: Fixed clear charging profiles.
- BehobenOCPP: We handle decimal numbers on the Smart Charge profile's limit.
-
- NeuCB N: Changes due to Smart Charging
- NeuOCPP: Smart Charging starting point fininshed.
- NeuOCPP: Smart Charging configuration keys are handled.
- NeuOCPP: Smart Charging profiles can be added and will be validated and can also be deleted.
- BehobenOCPP, CB N and CB Master: Fixed bug when locked was modified and ocpp was activated but chargepoint isn't connected to any central system.
- BehobenCB Master: Fixed bug when OCPP charge is started where if connector 1 was charging, connector 0 couldn't start a charge.
- BehobenCB Master: Prevent crash in the case that .versions folder doesn't exist.
- BehobenCB Master: Register cards are now added to card cache.
-
- NeuPole: Screen now shows when user passes a non registered RFID card.
- VerbessertCB Master: Improvements in update process.
- VerbessertCB Master: Changes so that screen indicates when a non registered RFID card is passed.
- VerbessertCB N: Improvements in update process.
- VerbessertOCPP: GetConfigurationKeys now returns unknown keys and we handle SupportedFileTransferProtocols key.
- VerbessertPole: Romanian identifier moved to position 6 to maintain order language with Trydan.
-
- VerbessertCB Master: We store RFID cards in cache.
- VerbessertCB N: RFID reader improvements. Case where two connectors are plugged in and a card is passed.
- VerbessertCB N: New communication method so that CB master can obtain RFID cards.
- EntferntCB Master: We don't send wifi_info in report anymore and we have removed functions related to wifi_info.
- EntferntCB N: We don't send wifi_info in report anymore.
-
- NeuCB N: Static IP configuration through access point.
- VerbessertCB Master: Improvement in connect/disconnect logic. Disconnection is less rigid and we increased network check from 5 seconds to 15 seconds.
- VerbessertCB Master: Increased RFID reader antenna gain.
- VerbessertCB N: When charger reconnects, it will only send report if a property has changed.
- VerbessertCB N: Properties are now only reported when they have changed from previous value.
- BehobenCB Master: CWe fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- BehobenCB N: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
- BehobenOCPP: We fix error provoked by blocking/unblocking when charger has OCPP activated and isn't connected to central system.
-
- VerbessertCB Master: Safeguard so that it doesn't fail when there's a missing network card and we try to obtain data usage.
- VerbessertOCPP: Removed range validation from measurer.
- AktualisiertCB Master: Removed range validation from measurer for Carlo Gavazzi and Phoenix Contact measurers.
- BehobenCB Master: Fixed energy by hour bug.
-
- VerbessertCB N: We show in log if i2c reconnects.
-
- NeuCB Master: Chargebox Cache now stores state of connectivity with V2C service to show it on the screen.
- NeuCB N: Chargebox Cache now stores state of connectivity with V2C service.
- NeuPole: The screen now shows a cloud icon to indicate connectivity to our cloud.
- VerbessertCB Master: Adjustment in measurer so that it can handle int32 represented as uint.
- VerbessertCB N: Log improvements to not show get_has_internet_connection y and reduce error messages generated when i2c is not working.
- VerbessertCB N: Changes to reduce calls to has_internet_connection to consume less data.
- VerbessertOCPP: We log exception names since sometimes exception errors return empty string.
- VerbessertOCPP: We capture error if there's an error when sending heartbeat.
- VerbessertOCPP: We change client controller so that it's the same as CB N and CB Master.
- BehobenCB N: Seconds of timeout now return 0 instead of None if not set.
-
- VerbessertCB Master: Master now sends the balanced intensity when it changes.
- VerbessertCB N: Changed order of what happens when configuration is changed. We first update the value, then we report the changes to Azure and finally we set the cache.
- VerbessertCB N: CB Master now sends balanced intensity instead of CB N probing for change.
- BehobenCB Master: Fixed error where RFID stops charge while the other connector is enabled.
- BehobenCB Master: Fixed error where RFID card is passed and both connectors have a car plugged in.
- BehobenCB N: Fixed bug where changing local load balancing set both connector intensities to 16.
-
- VerbessertCB Master: Change in log system to not show repeated logs.
- VerbessertCB Master: Shared properties are now set in the other connector if they are different on startup.
- VerbessertCB Master: Completely decoupled OCPP from CB N and get_ocpp_config function fixed.
- VerbessertCB Master: Network state is now sent when changed instead of being probed every 30 seconds.
- VerbessertCB N: General improvements of communication between modules and cache.
- VerbessertCB N: Improved stability related with missing configuration.
- VerbessertCB N: Change in log system to not show repeated logs.
- VerbessertCB N: Fixed problem where Chargebox loop would destroy RFID state.
- VerbessertCB N: Fixed OCPP ConnectionTimeout.
- VerbessertCB N: Completely decoupled OCPP from CB N
- VerbessertCB N: Network state is now sent when changed instead of being probed every 30 seconds.
- VerbessertCB N: We only change repository hash if it's different than the current one.
- VerbessertCB N: Updating checks if charger is updated or not and only changes version after it has been updated.
- VerbessertCB N: General improvements of communication between modules.
- VerbessertOCPP: Improved Client Controller traceability.
-
- VerbessertCB Master: Created Cache to decrease the number of requests and communication between modules.
- VerbessertCB Master: Fixed network reset problem.
- VerbessertCB Master: Changes so that Pole can receive all the information it needs in one call.
- VerbessertCB Master: Changes dues to how the measures are now sent.
- VerbessertCB Master: General access point improvements.
- VerbessertCB Master: Improvements due to changes in module communication.
- VerbessertCB N: Created singletons are now thread safe.
- VerbessertCB N: Server Controller is now executed sooner due to being fundamental in correct functioning.
- VerbessertCB N: Changes to take into account CB Master's cache
- VerbessertCB N: Changed way we obtain measures to perform less requests with Client Controller.
- VerbessertCB N: Improvements due to changes in module communication.
- VerbessertOCPP: Created singletons are now thread safe.
- VerbessertOCPP: Completely decoupled from CB N and now only communicates with CB Master.
- VerbessertOCPP: Simplified communication between modules.
- VerbessertOCPP: Improvements due to changes in module communication.
- VerbessertPole: Created singletons are now thread safe.
- VerbessertPole: Completely decoupled CB N and we obtain all information needed in one call to CB Master.
- VerbessertPole: Improvements due to changes in module communication.
-
- VerbessertCB Master: The charger now limits the number of messages that appear in the case that there's a range validation fail of a measure.
- VerbessertCB N: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- VerbessertCB N: Restart Server Controller mechanism.
- VerbessertOCPP: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- VerbessertOCPP: Restart async Server Controller mechanism.
- VerbessertPole: Client Controller won't stop sending messages and will show errors every 10 wrongly sent messages.
- BehobenOCPP: If there's an error handling a request, we won't add it to the offline queue.
- BehobenOCPP: Include thread and sys libraries.
-
- VerbessertCB N: When rebooting, we check module communication server.
- VerbessertCB N: Decoupled concept of connector id and measurer address.
- VerbessertCB Master: When rebooting, we check module communication server.
- VerbessertCB Master: Decoupled concept of connector id and measurer address.
- VerbessertCB Master: Fixed error in Phoenix Contact measurer.
- VerbessertPole: ZMQ integrated to improve communication.
-
- VerbessertPole: Improvement to let the user know when to connect the vehicle.
- VerbessertPole: Screen now reflects if charger has only one connector.
- VerbessertCB Master: Changed SSID format so that it's the same as Trydan's format.
-
- VerbessertOCPP: Added measurer range validation.
- VerbessertCB Master: Added measurer range validation.
- AktualisiertOCPP: AuthorizeRemoteTxRequests is now a read and write configuration key.
- BehobenOCPP: Fixed problem with repeated logs.
- BehobenCB Master: Fixed problem with repeated logs.
- BehobenCB N: Fixed problem with repeated logs.
-
- VerbessertCB N: Handled special case of change intensity.
-
- NeuCB Master: Access point logic fininshed.
- NeuOCPP: Data validation when configuration is changed.
- NeuOCPP: Charger can now handle multiple transactions offline.
- VerbessertCB N: If OCPP is on, we disable payment mode.
-
- VerbessertOCPP: Reset function improved. Corresponding Status Notification is sent.
-
- VerbessertCB N: General stability improvements.
- VerbessertCB N: Changed payment method approach.
- VerbessertCB Master: Changed payment method approach.
- VerbessertCB Master: Improved robustness in the case the access point software is not installed.
- VerbessertPole: Improvements due to payment method.
-
- NeuOCPP: Change availability validates connector.
- NeuCB Master: Finished Access point.
- VerbessertCB Master: Changed compressed file formats from gzip to gz
- VerbessertCB Master: Force backup when restarting.
-
- NeuCB N: Allow to change intensity, when i2c is failing.
- NeuCB Master: Implemented most of the access point server functionalities.
- BehobenCB Master: Fixed OCPP measurer error that ocurred when all selected measures in Meter Values returned 0.
- 1.4.3NeuCB Master: Initial version of the access point server.
-
- VerbessertCB N: Changes to improve Pole software.
- VerbessertPole: Changes to simplify view logic.
- BehobenCB Master: If payment mode is active, charger won't allow to charge with RFID card.
- BehobenPole: Removed sourceMappingUrl to prevent 404 error when there's no internet.
- 1.4.1BehobenCB N: Payment mode changed since payload format for server has changed.
- 1.4.0NeuPole: Changes in screen software that reflects payment mode, blocking connectors and OCPP.
-
- BehobenOCPP: Charger won't send Authorize if passed RFID card is already used in a transaction.
- 1.3.23VerbessertOCPP: We store RFID cards in lower caps to improve robustness.
-
- VerbessertOCPP: Improved robustness of RFID cards stored in the Local Authorization list.
-
- VerbessertOCPP: Improved Local Authorization logic.
-
- BehobenCB Master: Fixed wifilist sending format.
-
- NeuCB N: We report information regarding wifi_info. Direct method to ask for the SSIDs the raspberry pi detects.
- 1.3.18VerbessertOCPP: Improved authorization cache handler.
-
- VerbessertOCPP: Improved handling of measurer values.
-
- VerbessertOCPP: Improved handling of configuration keys.
-
- AktualisiertCB N: Payment mode with duration and timers.
-
- VerbessertOCPP: Improved MeterValues handler.
- 1.3.13NeuOCPP: Finished Local Authorization List profile.
- 1.3.12VerbessertOCPP: Log Improvements.
- 1.3.11BehobenOCPP: Fixed bug that wouldn't send Authorize Request when passing the RFID card.
-
- NeuOCPP: Basic implementation of OCPP profiles: FirmwareManagement, LocalAuthListManagement, Reservation and SmartCharging.
- 1.3.9VerbessertCB Master: Fixed RFID card reading with Wiegand reader for cards that have a 0 on the left side. Example of cards that failed: 32:0a:2c:23, 41:00:32:12.
-
- AktualisiertOCPP: Availability isn't managed by OCPP anymore. It is handled exclusively by property locked.
- 1.3.7VerbessertCB N: If charger is blocked, led blinks won't be sent.
- 1.3.6NeuCB N: Payment Mode finished with start and stop.
- 1.3.5VerbessertOCPP: Clear Cache can only be performed when all connectors are in the OCPP state Available.
-
- VerbessertOCPP: Changes so that availability can be changed from CB N.
-
- VerbessertCB Master: OCPP module can now ask for Status Notification.
- AktualisiertOCPP: The charger the different possible OCPP states in the Status Notification.
- 1.3.2VerbessertOCPP: We can now set configuration parameters for safeguard.
- 1.3.1VerbessertOCPP: Change availability is now completely functional. It changes to inoperative during a charge and availability changes the locked value.
- 1.3.0BehobenOCPP: Changed way we obtain measurer data for OCPP.
- 1.2.0BehobenOCPP: Temporary fix for Place to plug since OCPP library can't handle unknown keys.
- 1.1.0BehobenOCPP: Fixed _available_connectors error.
-
- NeuOCPP.
- NeuScreen.
- NeuPole.
- NeuCB Master.
- NeuCB N.
6 von 65