fbpx Menú flotante
V2C » Support Area » Power control » Dynamic » Kostal KSEM connection with Trydan

Connection of Kostal KSEM with Trydan

Kostal inverters can be connected to Trydan directly through the KSEM energy meter (Kostal Smart Energy Meter) via Modbus TCP communication.

How to establish the connection

To establish the connection, we will first enable Modbus TCP communication. To do this, we need to access the IP of the KSEM meter, which can be found in the router or through applications that allow searching for local IP addresses. Next, we will activate the TCP slave in the Modbus Configuration section.

How to find the IP of devices connected to my local network?

Kostal Inverter Setup with KSEM Meter in the V2C Cloud App

Open the V2C Cloud App, select the charging point, and then go to the Configuration section. Enter Dynamic Power Control and select Kostal KSEM in the meter section.

The IP will be the same as the one you used to connect to the KSEM meter via the web. Remember, it must be on the same local WiFi network.

Note: This type of connection will not display photovoltaic generation in the V2C App, but all charging modes will function the same way.

Do you need technical support?

Generate a request in the Technical Support Centre and we will contact you as soon as possible to offer you the best solution.

Contact Technical Support