SMA Sunny Boy Inverter Connection with Trydan
If you have an SMA Sunny Boy inverter, you can connect it to the Trydan charging point to maximise the use of solar energy from your installation.
Steps to establish the connection
Enable the MODBUS TCP on your inverter.
Connect to the inverter’s IP address by entering the IP on a device connected to the same local network, accessing the SMA Sunny Boy interface. Learn how to find the IP of devices connected to your network.
The password is provided with the product at purchase. If it’s not available, contact your installer, or call SMA at 93 563 50 99.
Next, select the SMA inverter you wish to configure in the plant tree.
Go to the Settings tab and select the External Communication parameter group. Click Edit and then enable TCP Server under the Modbus – TCP Server group (Enabled – Yes).
Pairing the Trydan Charging Point with the SMA Sunny Boy Inverter
Open the V2C Cloud App, select the charging point, and go to the Settings section.
In Dynamic Power Control, select the SMA Sunny inverter.
Do you need technical support?
Generate a request in the Technical Support Centre and we will contact you as soon as possible to offer you the best solution.