Sungrow Inverter Integration with Trydan

Sungrow Inverter Integration

For the integration of the Trydan e-Charger with Sungrow inverters to work, they must be connected to the same network as Trydan. Depending on the inverter model, it can be connected to the internet in different ways.

On one hand, if the inverter has a LAN port, it is recommended to connect the inverter to the router using an RJ45 cable.

On the other hand, if the inverter lacks this port, the WiNet-S module is required to connect the inverter via WiFi or Ethernet.

The WiNet-S module supports both Ethernet and WLAN communication but is not recommended to use both methods simultaneously. The module should be inserted into the COM1 port (2 in the image) for both WLAN and Ethernet communication, with the difference that for Ethernet, an RJ45 cable must be connected to the module.

With the default configuration, once the inverter and Trydan are on the same network, the integration will be complete. However, ensure the communication parameters on the inverter are as follows:

• Addr: 1
• DHCP: ON
• Port: 502