Updates voor Trydan en Trydan Pro
Wij werken continu aan het verbeteren van de functionaliteiten van Trydan en Trydan Pro. Hier vindt u de meest recente versie van onze e-Charger en de laatste updates die zijn doorgevoerd.
Nieuwste versie
2.5.2
Trydan en Trydan Pro
2.5.2Nieuwste versie
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- NieuwDirect query of OCPP status
- NieuwNew Solplanet/AISWEI Inverter
- NieuwNew Hoymiles Inverter
- NieuwBattery discharge control: GoodWe, SolarEdge
- NieuwHuawei inverters direct connection without Dongle
- NieuwUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- NieuwNew "Unlimited" Wake-up 5 mode available from the LCD
- NieuwImprovements in Bluetooth cybersecurity
- VerbeterdFixes in FV mode + Minimum power
- VerbeterdOCPP: duplicate BootNotifications are avoided
- VerbeterdSecurity menu lock during vehicle charging
- VerbeterdImprovements for Linky-LORA
Eerdere versies 46
-
- NieuwCompatibility with SigEnergy inverters
- NieuwNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- NieuwWiFi connection for Deye inverters via Elfin
- NieuwExpansion to 105 RFID cards
- NieuwPAP/CHAP authentication for 4G connection
- NieuwMore stable OCPP connections
- VerbeterdReading the P1 and Victron meters is more reliable in the event of communication failures.
- VerbeterdStability of mixed three-phase charging
- VerbeterdError reporting and diagnostic system
- VerbeterdImprovement of home battery charging priority in PV charging modes
-
- NieuwManagement of home battery discharge in charging profiles
- NieuwUnlocking the Trydan by smartphone proximity
- NieuwNew models of SofarSolar and Azzurro inverters
- NieuwAdded current and voltage per phase in Home Assistant and Modbus API.
- NieuwWiFi connection in Deye inverters
- NieuwIncrease of up to 80 RFID cards
- NieuwBattery compatibility in SolarEdge inverters
- NieuwScroll text for long texts
- VerbeterdOptimization of Ethernet network interface
- VerbeterdImprovements in the Modbus TCP client
- VerbeterdImprovements in mixed three-phase charging
- VerbeterdImprovement of texts in German
- VerbeterdIncrease the voltage range of the installation from the control panel.
-
- OpgelostOCPP password bug
- OpgelostProblems connecting to CSMS after restarts
-
- NieuwTarget charge kWh
- NieuwNew SMA Sunny Boy model
- NieuwNew Fronius model with battery
- NieuwSelect Modbus API address ID
- NieuwNew Deye models
- NieuwSofar Solar inverters
- NieuwAzzurro inverters
- NieuwSelect MID address
- NieuwEMMA Huawei
- NieuwSecurity Profile 2 OCPP (wss + auth + CA cert)
- NieuwPrivate 4G SIMs in OCPP
- NieuwOcppFreeMode
- NieuwOCPP internal queue messages
- VerbeterdTime synchronization
- VerbeterdPower plate measurements 1.0
- VerbeterdWiFi improvements
- OpgelostExclusive mode bug with batteries
- OpgelostCoordinate "ContractedPower" and load profiles with HTTP API.
- OpgelostImprove RFID errors
- OpgelostMixed load bug
- OpgelostBug photovoltaic mode + minimum
- OpgelostBug statistics without FV via BLE
-
- NieuwMIFARE Ultralight RFID cards
- VerbeterdMore robust OTA update
- OpgelostBug management autolock with payments mode
- OpgelostBug in payments mode with RFID
-
- VerbeterdInstallation problem readings
- VerbeterdImprovement in BYD mode
- OpgelostBug with Wibeee inverter
-
- NieuwObtain firmware version via Modbus
- NieuwGoodWe via Modbus TCP
- NieuwOCPP: FirmwareManagement
- NieuwAutolock
- NieuwNew MID models
- NieuwNew wake-up modes
- NieuwAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- NieuwLinky meter for French meters
- NieuwModbus termination resistance
- NieuwReading individual properties HTTP API
- NieuwTurn off/Turn on logo and LCD from HTTP API
- BijgewerktImprovements in dynamic control
- BijgewerktImprovement in Sungrow inverter measurements
- BijgewerktImprovements in the OTA update
- BijgewerktImprovements in the button panel menu
- BijgewerktNew Deye models
- BijgewerktOCPP: improvement in MeterValues
- BijgewerktOCPP: send StatusNotification "Faulted" with errors and warnings
- BijgewerktOCPP: publish current version
- BijgewerktOCPP: BootNotification timeout
- BijgewerktNew NTP servers
- BijgewerktImproved WI-FI scanning
- BijgewerktImprovement in P1 meter
- BijgewerktImprovement in remote logs
- BijgewerktIoT call limitation per charger
- BijgewerktImprove RAM memory
- BijgewerktStability via Ethernet
- BijgewerktCorrected translations
- OpgelostError "Waiting for Power"
- OpgelostBug with RFID cards with long names
- OpgelostBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- OpgelostImprove statistics via Bluetooth
- OpgelostLocal balancing improvements for up to 10 devices
- OpgelostBug when sending RFID code in the statistics
- OpgelostBug with Exclusive PV mode and batteries
-
- NieuwStatic power control is added (only with Trydan consumption).
- NieuwMixed charging adapts to European rates.
- NieuwPower control programming with phase limits is allowed.
- NieuwThe power control adapts to European countries with phase current limits.
- BijgewerktThe power control algorithm has been modified step by step to apply PID modulation.
- BijgewerktThe static power control between sockets or between e-Chargers is improved.
- OpgelostThe failure of remote records is avoided when a disconnection occurs.
-
- OpgelostBug DTSU666-G meters
-
- VerbeterdImprovement in Wake Mode
- OpgelostFixed bug when changing the port in MQTT.
-
- NieuwEcoCharging to schedule charging automatically during the cheapest daylight hours.
- NieuwTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- NieuwCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- NieuwFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- NieuwImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- NieuwImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- NieuwOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- NieuwOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- NieuwOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- VerbeterdReading the power value of the batteries in Goodwe EH and ET inverters.
- VerbeterdSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- VerbeterdImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- VerbeterdImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- VerbeterdImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- VerbeterdOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- VerbeterdOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- VerbeterdOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- OpgelostOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- NieuwVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- NieuwSAJ hybrid inverters
- NieuwShelly Pro meters
- NieuwInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- NieuwDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- NieuwTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- VerbeterdLeak detection
- VerbeterdMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- VerbeterdModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- VerbeterdVisualization of the RFID card authentication process in OCPP
- VerbeterdThe memory used in JSON and OCPP goes to the SPI RAM.
- OpgelostInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- OpgelostCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- NieuwAdaptation of OCPP to new central systems
- NieuwNew Deye models
- VerbeterdImprovements in the direction detection of the V2C 2.0 control box
- OpgelostLEDs blink when there is no connection.
- OpgelostBug in Greenheiss hybrid
-
- NieuwDeye / Turbo Energy three-phase
- NieuwShelly Pro EM and Shelly Pro 3EM (Beta)
- VerbeterdShow text on bidirectional meters
- VerbeterdReadings with Fronius and DTSU666
- VerbeterdReaction times in the leak detector
- VerbeterdShow Waiting for Charge in Stop mode
- OpgelostBug with French language
- OpgelostRaise the HTTP server via Ethernet
- OpgelostBug in payments
- OpgelostRead-only in the OCPP properties
- OpgelostSave power segments via Bluetooth on some devices.
- OpgelostShelly Portugal measurements
-
- NieuwLive Remote Logs
- VerbeterdShow stop due to dynamic control
- VerbeterdRestarts due to reconnection attempts
- VerbeterdQA Protocol
- VerbeterdVoltage and Temperature Reading Power PCB
- OpgelostNaN measurement on some meters
- OpgelostError in Home Wizard readings
-
- VerbeterdPerformance improvement and future compatibility between Trydan and Trydan Pro.
- VerbeterdImprovements in OCPP protocol
- VerbeterdImprovements in the QA process
- VerbeterdImprovement in memory usage
- VerbeterdMore robust statistics
-
- NieuwNetworks with WPA3 security
- NieuwNew BLE (NimBLE)
- Nieuwe-keys via BLE connection
- NieuwNew language: Romanian
- NieuwEnphase version 7.x.x, Solis with batteries
- NieuwAdaptation of the i2c power board
- VerbeterdAzure library update
- VerbeterdUpdate of ESP-IDF and Arduino-ESP32 libraries
- VerbeterdInvestor communication via WiFi connection without Internet
- VerbeterdImprovement in V2C 2.0 meter refresh rate
- VerbeterdImprovement in OCPP, adaptation to support disconnections
- VerbeterdImprovement in key fob detection
- VerbeterdImproved refresh rate
- VerbeterdImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- OpgelostModification of Deye/Turbo Energy batteries
- OpgelostCustomizable MQTT topics and username/password
- OpgelostDisconnection statistics report
- OpgelostBLE compatibility of iPhone
- OpgelostOperation of V2C 2.0 meter at night
- OpgelostAutomatic date and time
- OpgelostInteraction with Megane
-
- NieuwBug in photovoltaic three-phase mode
- VerbeterdWiFi recovery routine
-
- NieuwMixed three-phase charging available through the physical menu.
- NieuwAdded three-phase MID Meter
- NieuwInclusion of server ID 2 in SolarEdge inverters
- NieuwAdded Modbus registers with the meter measurement.
- NieuwHTTP commands added for integration with HA.
- NieuwEnphase Envoy Inverter (beta) (versions 5.x.x)
- NieuwV2C 2.0 error detection of clamp not connected
- NieuwMQTT Slave with user/password authentication and customizable topics (beta)
- VerbeterdImprovement of the WatchDog to prevent system freezing
- VerbeterdImprovement of nearby WiFi scanning
- VerbeterdBluetoothLE service reconnection protocol
- VerbeterdWiFi optimization IRAM and affinity with the Azure task
- VerbeterdReconnection protocol in the absence of WiFi
- VerbeterdFactory reset
- VerbeterdThe error code and LED interface
- VerbeterdImproved the Isolated Installation mode and zero feed-in.
- VerbeterdReduction in cut-off time through dynamic control to 1 min
- VerbeterdAutomatic detection of time and time zone
- VerbeterdThe optimization and refactoring of the measurement slaves
- VerbeterdUnlocking with BLE Tag
- OpgelostOccasional LCD freezes
- OpgelostFalse positives from the leak detector
- OpgelostProblems with the MID Meter
- OpgelostLED error during update
- OpgelostDefault value for JSON type variables
- OpgelostMeasurement at 0 in Deye/TurboEnergy Inverter
- OpgelostVisual errors and local balancing address assignment
-
- NieuwSolar Discount on Shortcuts
- NieuwDeye/TurboEnergy Inverter Beta
- NieuwPhoenix Contact meter
- NieuwCarlo Gavazzi meter
- VerbeterdOCPP improvements and tested in MONTA
- VerbeterdProblems in dynamic control
- VerbeterdReconnections and WiFi Stability
- OpgelostFrozen LCD
-
- NieuwIsolated Mode in Photovoltaic Modes
- NieuwDutch, Danish, and Valencian
- NieuwLeak sensor modes (installer menu)
- NieuwMID meter (installer menu)
- NieuwNew Ingeteam protocol (Battery Management)
- NieuwThree-phase meters DTSU666
- NieuwSDM three-phase meters
- VerbeterdLocal Balancing Protocol and priorities
- VerbeterdDetection of ports and hosts in OCPP
- VerbeterdStable version of SMA Sunny Boy
- VerbeterdPortuguese version of Wibeee
- VerbeterdFronius measuring home consumption
- OpgelostUnexpected locks and unlocks
- OpgelostWhite blinking in locked mode removed
- OpgelostError selecting the slaves in beta
- OpgelostError of SolarEdge three-phase inverters
-
- NieuwChanges and improvements in calibration
-
- VerbeterdCalibration adapted to the new hardware
- OpgelostData analysis in Kostal Piko fixed
-
- NieuwLocal balancing between Trydans available via WiFi or wired connection.
- NieuwSDM-220/320/120 (Tested with the Eastron brand)
- NieuwDDSU-666 Meter (Common in Huawei installations)
- NieuwSelf-calibrating without the need for a car
- NieuwManual hour available
- NieuwHTTP requests to manage the logs
- NieuwNew Modbus Registers
- NieuwGreenheiss inverters
- NieuwSAJ inverters
- NieuwWired Solis inverters
- NieuwResponse time in configurable dynamic control
- VerbeterdConfigurable installation voltage
- VerbeterdNew manufacturing process
- VerbeterdIncluded Shelly three-phase but without FV measurement.
- VerbeterdCar consumption via MQTT fixed
- VerbeterdImproved and more intuitive physical menu
- CompatibiliteitBeta models of Goodwe: the battery measurement is canceled.
- OpgelostBug in Max and Min Intensity via Modbus fixed.
- OpgelostFalse positives in the leak detector fixed
-
- NieuwPrevention of conflicts between slaves and the cloud
- OpgelostGoodWe conflicts and Azure initialization
- OpgelostFix in Shelly with only three-phase.
-
- VerbeterdPending statistics will be sent only once.
- VerbeterdShelly 3EM three-phase and modification for Portugal
- OpgelostModbus Multiple Readings Hotfix
-
- NieuwNew Modbus registers
- NieuwRFID reader in alpha version
- NieuwSolaX X3 híbrido compatible
- NieuwAvailable calibration and shortcuts via WiFi
- VerbeterdOCPP Improvements
- VerbeterdImprovement in WiFi scanning
- VerbeterdImprovement in reconnection routines
- OpgelostBluetooth timezone failure
- OpgelostError in Trydan synchronization - APP
- OpgelostStatic IP configuration in Trydan via WiFi
- OpgelostError saving Modbus parameters
-
- NieuwNew method for calibrating communication with the car
- NieuwBeta version of the GoodWe ET/EH/BT/BH
- VerbeterdImprovement in the communication analysis with the car
-
- NieuwAuto lock after 60 seconds without a car (shortcut)
- NieuwModification for Three-Phase Installations in Portugal for V2C 2.0
- NieuwKostal Piko is added.
- VerbeterdReformulation of the Dynamic Control Algorithm
- VerbeterdImprovement in the refresh rate of Huawei inverters
- VerbeterdSolarEdge stable (Meter measuring export)
- VerbeterdStable version of GoodWe
- VerbeterdDetection of state D and E according to protocol
- VerbeterdImproved QA process
- OpgelostStored in memory after writings via Modbus TCP and RTU
- OpgelostBug in the FV measurements and peaks resolved for V2C 2.0
-
- NieuwGoodWe in beta version
- NieuwCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- VerbeterdMQTT in stable version
- VerbeterdVictron in stable version
- VerbeterdImproved connection with Azure
-
- NieuwMQTT slave beta version
- VerbeterdDetection of power direction in Wibeee
- OpgelostThe Victron and SolarEdge inverters were bringing down the system.
-
- NieuwSolarEdge inverter added (Beta)
- NieuwVictron inverter added (Beta)
- NieuwAutolock enabled in shortcut (60 s)
- NieuwAutomatic time zone detection
- NieuwAlternative meter for car consumption (RS485)
- NieuwFV Exclusive with configurable variation
- NieuwNew Languages (French, Italian, and German)
- OpgelostFixed error in minimum power mode.
-
- VerbeterdImprovements in Dynamic Control with batteries
- VerbeterdImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- OpgelostResolved the IP configuration issues for Trydan with WiFi and BLE.
- OpgelostResolved the issues with the IP configuration of Shelly BLE.
-
- NieuwInclusion of the Wibeee meter
- NieuwSlave 2.0 compatible with Type 1 and Type 2 installation
- NieuwChange in the established connection blinking
- NieuwDetection and measurement of bifacial load
- NieuwImprovement in the collection and transmission of charging data
- NieuwAlternative Meter Phoenix Contact (ModbusRTU)
- NieuwModbusRTU in Trydan (simultaneous slave and master)
- NieuwStatic IP configuration in Trydan
- NieuwPossibility to select the IP in Shelly
- VerbeterdInclusion of maximum intensity in OCPP (as a property)
- VerbeterdImprovement in the reading of Solax inverters
- VerbeterdInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- VerbeterdModbusRTU and Modbus TCP server in Trydan
- BijgewerktFirst stable version of Ingeteam
- BijgewerktImprovement in the speed of the leak detector
-
- OpgelostError solution in manufacturing when saving WiFi
-
- NieuwEliminate false communication errors from the slaves.
- NieuwSave the first Shelly that Trydan connects to.
- BijgewerktWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- VerbeterdImprovement in telemetry recovery in OCPP
- VerbeterdImprovement in scanning nearby WiFi networks
-
- NieuwInternal Azure ping every 15 seconds to detect disconnections.
- NieuwSeparate reconnections to avoid crashing the server.
- NieuwOCPP adaptation to work with Home Assistant
- VerbeterdMigration of the I2C for the clock and LCD to native idf
-
- VerbeterdIncrease maximum binary size in local webServer
- OpgelostRecovery of OCPP transactions to prevent telemetry failures
-
- NieuwThe configuration of different IDs for Huawei inverters is added.
- VerbeterdCorrection of the power reading of the house
- OpgelostCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- NieuwPayment Method (V2C Payments)
- NieuwOCPP Protocol
- VerbeterdImprovement of WiFi and Bluetooth stability and reconnection
- OpgelostReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- OpgelostCorrection of the maximum file size for updates on Local Server
-
- NieuwList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- VerbeterdReconnection with V2C Cloud after communication loss
- OpgelostCorrected Shelly and Solax routines
-
- NieuwShortcuts on the buttons: Lock and Charging Schedule
- NieuwLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- NieuwAP mode when the configured WiFi is not available
- VerbeterdImprovement in LED error codes
- VerbeterdAdaptation for compatibility with Huawei inverters
-
- NieuwWe added connectivity with Fronius inverters.
- VerbeterdImprovements in screen writing and removal of strange characters
- VerbeterdImprovement in the transmission of statistics via both WiFi and BLE.
-
- NieuwError correction x and y
6 van 46