Mises à jour Trydan et Trydan Pro
Nous travaillons en continu pour améliorer les fonctionnalités de Trydan et Trydan Pro. Vous trouverez ici la version la plus récente de notre e-Charger et les dernières mises à jour effectuées.
Dernière version
2.5.2
Trydan et Trydan Pro
2.5.2Dernière version
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- NouveauDirect query of OCPP status
- NouveauNew Solplanet/AISWEI Inverter
- NouveauNew Hoymiles Inverter
- NouveauBattery discharge control: GoodWe, SolarEdge
- NouveauHuawei inverters direct connection without Dongle
- NouveauUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- NouveauNew "Unlimited" Wake-up 5 mode available from the LCD
- NouveauImprovements in Bluetooth cybersecurity
- AméliorationFixes in FV mode + Minimum power
- AméliorationOCPP: duplicate BootNotifications are avoided
- AméliorationSecurity menu lock during vehicle charging
- AméliorationImprovements for Linky-LORA
Versions précédentes 46
-
- NouveauCompatibility with SigEnergy inverters
- NouveauNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- NouveauWiFi connection for Deye inverters via Elfin
- NouveauExpansion to 105 RFID cards
- NouveauPAP/CHAP authentication for 4G connection
- NouveauMore stable OCPP connections
- AméliorationReading the P1 and Victron meters is more reliable in the event of communication failures.
- AméliorationStability of mixed three-phase charging
- AméliorationError reporting and diagnostic system
- AméliorationImprovement of home battery charging priority in PV charging modes
-
- NouveauManagement of home battery discharge in charging profiles
- NouveauUnlocking the Trydan by smartphone proximity
- NouveauNew models of SofarSolar and Azzurro inverters
- NouveauAdded current and voltage per phase in Home Assistant and Modbus API.
- NouveauWiFi connection in Deye inverters
- NouveauIncrease of up to 80 RFID cards
- NouveauBattery compatibility in SolarEdge inverters
- NouveauScroll text for long texts
- AméliorationOptimization of Ethernet network interface
- AméliorationImprovements in the Modbus TCP client
- AméliorationImprovements in mixed three-phase charging
- AméliorationImprovement of texts in German
- AméliorationIncrease the voltage range of the installation from the control panel.
-
- CorrectionOCPP password bug
- CorrectionProblems connecting to CSMS after restarts
-
- NouveauTarget charge kWh
- NouveauNew SMA Sunny Boy model
- NouveauNew Fronius model with battery
- NouveauSelect Modbus API address ID
- NouveauNew Deye models
- NouveauSofar Solar inverters
- NouveauAzzurro inverters
- NouveauSelect MID address
- NouveauEMMA Huawei
- NouveauSecurity Profile 2 OCPP (wss + auth + CA cert)
- NouveauPrivate 4G SIMs in OCPP
- NouveauOcppFreeMode
- NouveauOCPP internal queue messages
- AméliorationTime synchronization
- AméliorationPower plate measurements 1.0
- AméliorationWiFi improvements
- CorrectionExclusive mode bug with batteries
- CorrectionCoordinate "ContractedPower" and load profiles with HTTP API.
- CorrectionImprove RFID errors
- CorrectionMixed load bug
- CorrectionBug photovoltaic mode + minimum
- CorrectionBug statistics without FV via BLE
-
- NouveauMIFARE Ultralight RFID cards
- AméliorationMore robust OTA update
- CorrectionBug management autolock with payments mode
- CorrectionBug in payments mode with RFID
-
- AméliorationInstallation problem readings
- AméliorationImprovement in BYD mode
- CorrectionBug with Wibeee inverter
-
- NouveauObtain firmware version via Modbus
- NouveauGoodWe via Modbus TCP
- NouveauOCPP: FirmwareManagement
- NouveauAutolock
- NouveauNew MID models
- NouveauNew wake-up modes
- NouveauAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- NouveauLinky meter for French meters
- NouveauModbus termination resistance
- NouveauReading individual properties HTTP API
- NouveauTurn off/Turn on logo and LCD from HTTP API
- Mis à jourImprovements in dynamic control
- Mis à jourImprovement in Sungrow inverter measurements
- Mis à jourImprovements in the OTA update
- Mis à jourImprovements in the button panel menu
- Mis à jourNew Deye models
- Mis à jourOCPP: improvement in MeterValues
- Mis à jourOCPP: send StatusNotification "Faulted" with errors and warnings
- Mis à jourOCPP: publish current version
- Mis à jourOCPP: BootNotification timeout
- Mis à jourNew NTP servers
- Mis à jourImproved WI-FI scanning
- Mis à jourImprovement in P1 meter
- Mis à jourImprovement in remote logs
- Mis à jourIoT call limitation per charger
- Mis à jourImprove RAM memory
- Mis à jourStability via Ethernet
- Mis à jourCorrected translations
- CorrectionError "Waiting for Power"
- CorrectionBug with RFID cards with long names
- CorrectionBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- CorrectionImprove statistics via Bluetooth
- CorrectionLocal balancing improvements for up to 10 devices
- CorrectionBug when sending RFID code in the statistics
- CorrectionBug with Exclusive PV mode and batteries
-
- NouveauStatic power control is added (only with Trydan consumption).
- NouveauMixed charging adapts to European rates.
- NouveauPower control programming with phase limits is allowed.
- NouveauThe power control adapts to European countries with phase current limits.
- Mis à jourThe power control algorithm has been modified step by step to apply PID modulation.
- Mis à jourThe static power control between sockets or between e-Chargers is improved.
- CorrectionThe failure of remote records is avoided when a disconnection occurs.
-
- CorrectionBug DTSU666-G meters
-
- AméliorationImprovement in Wake Mode
- CorrectionFixed bug when changing the port in MQTT.
-
- NouveauEcoCharging to schedule charging automatically during the cheapest daylight hours.
- NouveauTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- NouveauCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- NouveauFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- NouveauImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- NouveauImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- NouveauOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- NouveauOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- NouveauOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- AméliorationReading the power value of the batteries in Goodwe EH and ET inverters.
- AméliorationSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- AméliorationImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- AméliorationImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- AméliorationImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- AméliorationOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- AméliorationOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- AméliorationOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- CorrectionOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- NouveauVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- NouveauSAJ hybrid inverters
- NouveauShelly Pro meters
- NouveauInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- NouveauDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- NouveauTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- AméliorationLeak detection
- AméliorationMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- AméliorationModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- AméliorationVisualization of the RFID card authentication process in OCPP
- AméliorationThe memory used in JSON and OCPP goes to the SPI RAM.
- CorrectionInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- CorrectionCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- NouveauAdaptation of OCPP to new central systems
- NouveauNew Deye models
- AméliorationImprovements in the direction detection of the V2C 2.0 control box
- CorrectionLEDs blink when there is no connection.
- CorrectionBug in Greenheiss hybrid
-
- NouveauDeye / Turbo Energy three-phase
- NouveauShelly Pro EM and Shelly Pro 3EM (Beta)
- AméliorationShow text on bidirectional meters
- AméliorationReadings with Fronius and DTSU666
- AméliorationReaction times in the leak detector
- AméliorationShow Waiting for Charge in Stop mode
- CorrectionBug with French language
- CorrectionRaise the HTTP server via Ethernet
- CorrectionBug in payments
- CorrectionRead-only in the OCPP properties
- CorrectionSave power segments via Bluetooth on some devices.
- CorrectionShelly Portugal measurements
-
- NouveauLive Remote Logs
- AméliorationShow stop due to dynamic control
- AméliorationRestarts due to reconnection attempts
- AméliorationQA Protocol
- AméliorationVoltage and Temperature Reading Power PCB
- CorrectionNaN measurement on some meters
- CorrectionError in Home Wizard readings
-
- AméliorationPerformance improvement and future compatibility between Trydan and Trydan Pro.
- AméliorationImprovements in OCPP protocol
- AméliorationImprovements in the QA process
- AméliorationImprovement in memory usage
- AméliorationMore robust statistics
-
- NouveauNetworks with WPA3 security
- NouveauNew BLE (NimBLE)
- Nouveaue-keys via BLE connection
- NouveauNew language: Romanian
- NouveauEnphase version 7.x.x, Solis with batteries
- NouveauAdaptation of the i2c power board
- AméliorationAzure library update
- AméliorationUpdate of ESP-IDF and Arduino-ESP32 libraries
- AméliorationInvestor communication via WiFi connection without Internet
- AméliorationImprovement in V2C 2.0 meter refresh rate
- AméliorationImprovement in OCPP, adaptation to support disconnections
- AméliorationImprovement in key fob detection
- AméliorationImproved refresh rate
- AméliorationImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- CorrectionModification of Deye/Turbo Energy batteries
- CorrectionCustomizable MQTT topics and username/password
- CorrectionDisconnection statistics report
- CorrectionBLE compatibility of iPhone
- CorrectionOperation of V2C 2.0 meter at night
- CorrectionAutomatic date and time
- CorrectionInteraction with Megane
-
- NouveauBug in photovoltaic three-phase mode
- AméliorationWiFi recovery routine
-
- NouveauMixed three-phase charging available through the physical menu.
- NouveauAdded three-phase MID Meter
- NouveauInclusion of server ID 2 in SolarEdge inverters
- NouveauAdded Modbus registers with the meter measurement.
- NouveauHTTP commands added for integration with HA.
- NouveauEnphase Envoy Inverter (beta) (versions 5.x.x)
- NouveauV2C 2.0 error detection of clamp not connected
- NouveauMQTT Slave with user/password authentication and customizable topics (beta)
- AméliorationImprovement of the WatchDog to prevent system freezing
- AméliorationImprovement of nearby WiFi scanning
- AméliorationBluetoothLE service reconnection protocol
- AméliorationWiFi optimization IRAM and affinity with the Azure task
- AméliorationReconnection protocol in the absence of WiFi
- AméliorationFactory reset
- AméliorationThe error code and LED interface
- AméliorationImproved the Isolated Installation mode and zero feed-in.
- AméliorationReduction in cut-off time through dynamic control to 1 min
- AméliorationAutomatic detection of time and time zone
- AméliorationThe optimization and refactoring of the measurement slaves
- AméliorationUnlocking with BLE Tag
- CorrectionOccasional LCD freezes
- CorrectionFalse positives from the leak detector
- CorrectionProblems with the MID Meter
- CorrectionLED error during update
- CorrectionDefault value for JSON type variables
- CorrectionMeasurement at 0 in Deye/TurboEnergy Inverter
- CorrectionVisual errors and local balancing address assignment
-
- NouveauSolar Discount on Shortcuts
- NouveauDeye/TurboEnergy Inverter Beta
- NouveauPhoenix Contact meter
- NouveauCarlo Gavazzi meter
- AméliorationOCPP improvements and tested in MONTA
- AméliorationProblems in dynamic control
- AméliorationReconnections and WiFi Stability
- CorrectionFrozen LCD
-
- NouveauIsolated Mode in Photovoltaic Modes
- NouveauDutch, Danish, and Valencian
- NouveauLeak sensor modes (installer menu)
- NouveauMID meter (installer menu)
- NouveauNew Ingeteam protocol (Battery Management)
- NouveauThree-phase meters DTSU666
- NouveauSDM three-phase meters
- AméliorationLocal Balancing Protocol and priorities
- AméliorationDetection of ports and hosts in OCPP
- AméliorationStable version of SMA Sunny Boy
- AméliorationPortuguese version of Wibeee
- AméliorationFronius measuring home consumption
- CorrectionUnexpected locks and unlocks
- CorrectionWhite blinking in locked mode removed
- CorrectionError selecting the slaves in beta
- CorrectionError of SolarEdge three-phase inverters
-
- NouveauChanges and improvements in calibration
-
- AméliorationCalibration adapted to the new hardware
- CorrectionData analysis in Kostal Piko fixed
-
- NouveauLocal balancing between Trydans available via WiFi or wired connection.
- NouveauSDM-220/320/120 (Tested with the Eastron brand)
- NouveauDDSU-666 Meter (Common in Huawei installations)
- NouveauSelf-calibrating without the need for a car
- NouveauManual hour available
- NouveauHTTP requests to manage the logs
- NouveauNew Modbus Registers
- NouveauGreenheiss inverters
- NouveauSAJ inverters
- NouveauWired Solis inverters
- NouveauResponse time in configurable dynamic control
- AméliorationConfigurable installation voltage
- AméliorationNew manufacturing process
- AméliorationIncluded Shelly three-phase but without FV measurement.
- AméliorationCar consumption via MQTT fixed
- AméliorationImproved and more intuitive physical menu
- CompatibilitéBeta models of Goodwe: the battery measurement is canceled.
- CorrectionBug in Max and Min Intensity via Modbus fixed.
- CorrectionFalse positives in the leak detector fixed
-
- NouveauPrevention of conflicts between slaves and the cloud
- CorrectionGoodWe conflicts and Azure initialization
- CorrectionFix in Shelly with only three-phase.
-
- AméliorationPending statistics will be sent only once.
- AméliorationShelly 3EM three-phase and modification for Portugal
- CorrectionModbus Multiple Readings Hotfix
-
- NouveauNew Modbus registers
- NouveauRFID reader in alpha version
- NouveauSolaX X3 híbrido compatible
- NouveauAvailable calibration and shortcuts via WiFi
- AméliorationOCPP Improvements
- AméliorationImprovement in WiFi scanning
- AméliorationImprovement in reconnection routines
- CorrectionBluetooth timezone failure
- CorrectionError in Trydan synchronization - APP
- CorrectionStatic IP configuration in Trydan via WiFi
- CorrectionError saving Modbus parameters
-
- NouveauNew method for calibrating communication with the car
- NouveauBeta version of the GoodWe ET/EH/BT/BH
- AméliorationImprovement in the communication analysis with the car
-
- NouveauAuto lock after 60 seconds without a car (shortcut)
- NouveauModification for Three-Phase Installations in Portugal for V2C 2.0
- NouveauKostal Piko is added.
- AméliorationReformulation of the Dynamic Control Algorithm
- AméliorationImprovement in the refresh rate of Huawei inverters
- AméliorationSolarEdge stable (Meter measuring export)
- AméliorationStable version of GoodWe
- AméliorationDetection of state D and E according to protocol
- AméliorationImproved QA process
- CorrectionStored in memory after writings via Modbus TCP and RTU
- CorrectionBug in the FV measurements and peaks resolved for V2C 2.0
-
- NouveauGoodWe in beta version
- NouveauCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- AméliorationMQTT in stable version
- AméliorationVictron in stable version
- AméliorationImproved connection with Azure
-
- NouveauMQTT slave beta version
- AméliorationDetection of power direction in Wibeee
- CorrectionThe Victron and SolarEdge inverters were bringing down the system.
-
- NouveauSolarEdge inverter added (Beta)
- NouveauVictron inverter added (Beta)
- NouveauAutolock enabled in shortcut (60 s)
- NouveauAutomatic time zone detection
- NouveauAlternative meter for car consumption (RS485)
- NouveauFV Exclusive with configurable variation
- NouveauNew Languages (French, Italian, and German)
- CorrectionFixed error in minimum power mode.
-
- AméliorationImprovements in Dynamic Control with batteries
- AméliorationImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- CorrectionResolved the IP configuration issues for Trydan with WiFi and BLE.
- CorrectionResolved the issues with the IP configuration of Shelly BLE.
-
- NouveauInclusion of the Wibeee meter
- NouveauSlave 2.0 compatible with Type 1 and Type 2 installation
- NouveauChange in the established connection blinking
- NouveauDetection and measurement of bifacial load
- NouveauImprovement in the collection and transmission of charging data
- NouveauAlternative Meter Phoenix Contact (ModbusRTU)
- NouveauModbusRTU in Trydan (simultaneous slave and master)
- NouveauStatic IP configuration in Trydan
- NouveauPossibility to select the IP in Shelly
- AméliorationInclusion of maximum intensity in OCPP (as a property)
- AméliorationImprovement in the reading of Solax inverters
- AméliorationInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- AméliorationModbusRTU and Modbus TCP server in Trydan
- Mis à jourFirst stable version of Ingeteam
- Mis à jourImprovement in the speed of the leak detector
-
- CorrectionError solution in manufacturing when saving WiFi
-
- NouveauEliminate false communication errors from the slaves.
- NouveauSave the first Shelly that Trydan connects to.
- Mis à jourWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- AméliorationImprovement in telemetry recovery in OCPP
- AméliorationImprovement in scanning nearby WiFi networks
-
- NouveauInternal Azure ping every 15 seconds to detect disconnections.
- NouveauSeparate reconnections to avoid crashing the server.
- NouveauOCPP adaptation to work with Home Assistant
- AméliorationMigration of the I2C for the clock and LCD to native idf
-
- AméliorationIncrease maximum binary size in local webServer
- CorrectionRecovery of OCPP transactions to prevent telemetry failures
-
- NouveauThe configuration of different IDs for Huawei inverters is added.
- AméliorationCorrection of the power reading of the house
- CorrectionCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- NouveauPayment Method (V2C Payments)
- NouveauOCPP Protocol
- AméliorationImprovement of WiFi and Bluetooth stability and reconnection
- CorrectionReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- CorrectionCorrection of the maximum file size for updates on Local Server
-
- NouveauList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- AméliorationReconnection with V2C Cloud after communication loss
- CorrectionCorrected Shelly and Solax routines
-
- NouveauShortcuts on the buttons: Lock and Charging Schedule
- NouveauLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- NouveauAP mode when the configured WiFi is not available
- AméliorationImprovement in LED error codes
- AméliorationAdaptation for compatibility with Huawei inverters
-
- NouveauWe added connectivity with Fronius inverters.
- AméliorationImprovements in screen writing and removal of strange characters
- AméliorationImprovement in the transmission of statistics via both WiFi and BLE.
-
- NouveauError correction x and y
6 sur 46