Trydan ja Trydan Pro uuendused
Täiustame pidevalt laadijate Trydan ja Trydan Pro funktsioone. Siit leiad meie e-Chargeri uusima versiooni ja viimased tehtud uuendused.
Viimane versioon
2.5.2
Trydan ja Trydan Pro
2.5.2Viimane versioon
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- UusDirect query of OCPP status
- UusNew Solplanet/AISWEI Inverter
- UusNew Hoymiles Inverter
- UusBattery discharge control: GoodWe, SolarEdge
- UusHuawei inverters direct connection without Dongle
- UusUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- UusNew "Unlimited" Wake-up 5 mode available from the LCD
- UusImprovements in Bluetooth cybersecurity
- TäiustusFixes in FV mode + Minimum power
- TäiustusOCPP: duplicate BootNotifications are avoided
- TäiustusSecurity menu lock during vehicle charging
- TäiustusImprovements for Linky-LORA
Varasemad versioonid 46
-
- UusCompatibility with SigEnergy inverters
- UusNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- UusWiFi connection for Deye inverters via Elfin
- UusExpansion to 105 RFID cards
- UusPAP/CHAP authentication for 4G connection
- UusMore stable OCPP connections
- TäiustusReading the P1 and Victron meters is more reliable in the event of communication failures.
- TäiustusStability of mixed three-phase charging
- TäiustusError reporting and diagnostic system
- TäiustusImprovement of home battery charging priority in PV charging modes
-
- UusManagement of home battery discharge in charging profiles
- UusUnlocking the Trydan by smartphone proximity
- UusNew models of SofarSolar and Azzurro inverters
- UusAdded current and voltage per phase in Home Assistant and Modbus API.
- UusWiFi connection in Deye inverters
- UusIncrease of up to 80 RFID cards
- UusBattery compatibility in SolarEdge inverters
- UusScroll text for long texts
- TäiustusOptimization of Ethernet network interface
- TäiustusImprovements in the Modbus TCP client
- TäiustusImprovements in mixed three-phase charging
- TäiustusImprovement of texts in German
- TäiustusIncrease the voltage range of the installation from the control panel.
-
- ParandusOCPP password bug
- ParandusProblems connecting to CSMS after restarts
-
- UusTarget charge kWh
- UusNew SMA Sunny Boy model
- UusNew Fronius model with battery
- UusSelect Modbus API address ID
- UusNew Deye models
- UusSofar Solar inverters
- UusAzzurro inverters
- UusSelect MID address
- UusEMMA Huawei
- UusSecurity Profile 2 OCPP (wss + auth + CA cert)
- UusPrivate 4G SIMs in OCPP
- UusOcppFreeMode
- UusOCPP internal queue messages
- TäiustusTime synchronization
- TäiustusPower plate measurements 1.0
- TäiustusWiFi improvements
- ParandusExclusive mode bug with batteries
- ParandusCoordinate "ContractedPower" and load profiles with HTTP API.
- ParandusImprove RFID errors
- ParandusMixed load bug
- ParandusBug photovoltaic mode + minimum
- ParandusBug statistics without FV via BLE
-
- UusMIFARE Ultralight RFID cards
- TäiustusMore robust OTA update
- ParandusBug management autolock with payments mode
- ParandusBug in payments mode with RFID
-
- TäiustusInstallation problem readings
- TäiustusImprovement in BYD mode
- ParandusBug with Wibeee inverter
-
- UusObtain firmware version via Modbus
- UusGoodWe via Modbus TCP
- UusOCPP: FirmwareManagement
- UusAutolock
- UusNew MID models
- UusNew wake-up modes
- UusAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- UusLinky meter for French meters
- UusModbus termination resistance
- UusReading individual properties HTTP API
- UusTurn off/Turn on logo and LCD from HTTP API
- UuendatudImprovements in dynamic control
- UuendatudImprovement in Sungrow inverter measurements
- UuendatudImprovements in the OTA update
- UuendatudImprovements in the button panel menu
- UuendatudNew Deye models
- UuendatudOCPP: improvement in MeterValues
- UuendatudOCPP: send StatusNotification "Faulted" with errors and warnings
- UuendatudOCPP: publish current version
- UuendatudOCPP: BootNotification timeout
- UuendatudNew NTP servers
- UuendatudImproved WI-FI scanning
- UuendatudImprovement in P1 meter
- UuendatudImprovement in remote logs
- UuendatudIoT call limitation per charger
- UuendatudImprove RAM memory
- UuendatudStability via Ethernet
- UuendatudCorrected translations
- ParandusError "Waiting for Power"
- ParandusBug with RFID cards with long names
- ParandusBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- ParandusImprove statistics via Bluetooth
- ParandusLocal balancing improvements for up to 10 devices
- ParandusBug when sending RFID code in the statistics
- ParandusBug with Exclusive PV mode and batteries
-
- UusStatic power control is added (only with Trydan consumption).
- UusMixed charging adapts to European rates.
- UusPower control programming with phase limits is allowed.
- UusThe power control adapts to European countries with phase current limits.
- UuendatudThe power control algorithm has been modified step by step to apply PID modulation.
- UuendatudThe static power control between sockets or between e-Chargers is improved.
- ParandusThe failure of remote records is avoided when a disconnection occurs.
-
- ParandusBug DTSU666-G meters
-
- TäiustusImprovement in Wake Mode
- ParandusFixed bug when changing the port in MQTT.
-
- UusEcoCharging to schedule charging automatically during the cheapest daylight hours.
- UusTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- UusCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- UusFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- UusImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- UusImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- UusOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- UusOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- UusOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- TäiustusReading the power value of the batteries in Goodwe EH and ET inverters.
- TäiustusSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- TäiustusImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- TäiustusImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- TäiustusImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- TäiustusOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- TäiustusOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- TäiustusOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- ParandusOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- UusVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- UusSAJ hybrid inverters
- UusShelly Pro meters
- UusInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- UusDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- UusTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- TäiustusLeak detection
- TäiustusMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- TäiustusModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- TäiustusVisualization of the RFID card authentication process in OCPP
- TäiustusThe memory used in JSON and OCPP goes to the SPI RAM.
- ParandusInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- ParandusCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- UusAdaptation of OCPP to new central systems
- UusNew Deye models
- TäiustusImprovements in the direction detection of the V2C 2.0 control box
- ParandusLEDs blink when there is no connection.
- ParandusBug in Greenheiss hybrid
-
- UusDeye / Turbo Energy three-phase
- UusShelly Pro EM and Shelly Pro 3EM (Beta)
- TäiustusShow text on bidirectional meters
- TäiustusReadings with Fronius and DTSU666
- TäiustusReaction times in the leak detector
- TäiustusShow Waiting for Charge in Stop mode
- ParandusBug with French language
- ParandusRaise the HTTP server via Ethernet
- ParandusBug in payments
- ParandusRead-only in the OCPP properties
- ParandusSave power segments via Bluetooth on some devices.
- ParandusShelly Portugal measurements
-
- UusLive Remote Logs
- TäiustusShow stop due to dynamic control
- TäiustusRestarts due to reconnection attempts
- TäiustusQA Protocol
- TäiustusVoltage and Temperature Reading Power PCB
- ParandusNaN measurement on some meters
- ParandusError in Home Wizard readings
-
- TäiustusPerformance improvement and future compatibility between Trydan and Trydan Pro.
- TäiustusImprovements in OCPP protocol
- TäiustusImprovements in the QA process
- TäiustusImprovement in memory usage
- TäiustusMore robust statistics
-
- UusNetworks with WPA3 security
- UusNew BLE (NimBLE)
- Uuse-keys via BLE connection
- UusNew language: Romanian
- UusEnphase version 7.x.x, Solis with batteries
- UusAdaptation of the i2c power board
- TäiustusAzure library update
- TäiustusUpdate of ESP-IDF and Arduino-ESP32 libraries
- TäiustusInvestor communication via WiFi connection without Internet
- TäiustusImprovement in V2C 2.0 meter refresh rate
- TäiustusImprovement in OCPP, adaptation to support disconnections
- TäiustusImprovement in key fob detection
- TäiustusImproved refresh rate
- TäiustusImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- ParandusModification of Deye/Turbo Energy batteries
- ParandusCustomizable MQTT topics and username/password
- ParandusDisconnection statistics report
- ParandusBLE compatibility of iPhone
- ParandusOperation of V2C 2.0 meter at night
- ParandusAutomatic date and time
- ParandusInteraction with Megane
-
- UusBug in photovoltaic three-phase mode
- TäiustusWiFi recovery routine
-
- UusMixed three-phase charging available through the physical menu.
- UusAdded three-phase MID Meter
- UusInclusion of server ID 2 in SolarEdge inverters
- UusAdded Modbus registers with the meter measurement.
- UusHTTP commands added for integration with HA.
- UusEnphase Envoy Inverter (beta) (versions 5.x.x)
- UusV2C 2.0 error detection of clamp not connected
- UusMQTT Slave with user/password authentication and customizable topics (beta)
- TäiustusImprovement of the WatchDog to prevent system freezing
- TäiustusImprovement of nearby WiFi scanning
- TäiustusBluetoothLE service reconnection protocol
- TäiustusWiFi optimization IRAM and affinity with the Azure task
- TäiustusReconnection protocol in the absence of WiFi
- TäiustusFactory reset
- TäiustusThe error code and LED interface
- TäiustusImproved the Isolated Installation mode and zero feed-in.
- TäiustusReduction in cut-off time through dynamic control to 1 min
- TäiustusAutomatic detection of time and time zone
- TäiustusThe optimization and refactoring of the measurement slaves
- TäiustusUnlocking with BLE Tag
- ParandusOccasional LCD freezes
- ParandusFalse positives from the leak detector
- ParandusProblems with the MID Meter
- ParandusLED error during update
- ParandusDefault value for JSON type variables
- ParandusMeasurement at 0 in Deye/TurboEnergy Inverter
- ParandusVisual errors and local balancing address assignment
-
- UusSolar Discount on Shortcuts
- UusDeye/TurboEnergy Inverter Beta
- UusPhoenix Contact meter
- UusCarlo Gavazzi meter
- TäiustusOCPP improvements and tested in MONTA
- TäiustusProblems in dynamic control
- TäiustusReconnections and WiFi Stability
- ParandusFrozen LCD
-
- UusIsolated Mode in Photovoltaic Modes
- UusDutch, Danish, and Valencian
- UusLeak sensor modes (installer menu)
- UusMID meter (installer menu)
- UusNew Ingeteam protocol (Battery Management)
- UusThree-phase meters DTSU666
- UusSDM three-phase meters
- TäiustusLocal Balancing Protocol and priorities
- TäiustusDetection of ports and hosts in OCPP
- TäiustusStable version of SMA Sunny Boy
- TäiustusPortuguese version of Wibeee
- TäiustusFronius measuring home consumption
- ParandusUnexpected locks and unlocks
- ParandusWhite blinking in locked mode removed
- ParandusError selecting the slaves in beta
- ParandusError of SolarEdge three-phase inverters
-
- UusChanges and improvements in calibration
-
- TäiustusCalibration adapted to the new hardware
- ParandusData analysis in Kostal Piko fixed
-
- UusLocal balancing between Trydans available via WiFi or wired connection.
- UusSDM-220/320/120 (Tested with the Eastron brand)
- UusDDSU-666 Meter (Common in Huawei installations)
- UusSelf-calibrating without the need for a car
- UusManual hour available
- UusHTTP requests to manage the logs
- UusNew Modbus Registers
- UusGreenheiss inverters
- UusSAJ inverters
- UusWired Solis inverters
- UusResponse time in configurable dynamic control
- TäiustusConfigurable installation voltage
- TäiustusNew manufacturing process
- TäiustusIncluded Shelly three-phase but without FV measurement.
- TäiustusCar consumption via MQTT fixed
- TäiustusImproved and more intuitive physical menu
- ÜhilduvusBeta models of Goodwe: the battery measurement is canceled.
- ParandusBug in Max and Min Intensity via Modbus fixed.
- ParandusFalse positives in the leak detector fixed
-
- UusPrevention of conflicts between slaves and the cloud
- ParandusGoodWe conflicts and Azure initialization
- ParandusFix in Shelly with only three-phase.
-
- TäiustusPending statistics will be sent only once.
- TäiustusShelly 3EM three-phase and modification for Portugal
- ParandusModbus Multiple Readings Hotfix
-
- UusNew Modbus registers
- UusRFID reader in alpha version
- UusSolaX X3 híbrido compatible
- UusAvailable calibration and shortcuts via WiFi
- TäiustusOCPP Improvements
- TäiustusImprovement in WiFi scanning
- TäiustusImprovement in reconnection routines
- ParandusBluetooth timezone failure
- ParandusError in Trydan synchronization - APP
- ParandusStatic IP configuration in Trydan via WiFi
- ParandusError saving Modbus parameters
-
- UusNew method for calibrating communication with the car
- UusBeta version of the GoodWe ET/EH/BT/BH
- TäiustusImprovement in the communication analysis with the car
-
- UusAuto lock after 60 seconds without a car (shortcut)
- UusModification for Three-Phase Installations in Portugal for V2C 2.0
- UusKostal Piko is added.
- TäiustusReformulation of the Dynamic Control Algorithm
- TäiustusImprovement in the refresh rate of Huawei inverters
- TäiustusSolarEdge stable (Meter measuring export)
- TäiustusStable version of GoodWe
- TäiustusDetection of state D and E according to protocol
- TäiustusImproved QA process
- ParandusStored in memory after writings via Modbus TCP and RTU
- ParandusBug in the FV measurements and peaks resolved for V2C 2.0
-
- UusGoodWe in beta version
- UusCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- TäiustusMQTT in stable version
- TäiustusVictron in stable version
- TäiustusImproved connection with Azure
-
- UusMQTT slave beta version
- TäiustusDetection of power direction in Wibeee
- ParandusThe Victron and SolarEdge inverters were bringing down the system.
-
- UusSolarEdge inverter added (Beta)
- UusVictron inverter added (Beta)
- UusAutolock enabled in shortcut (60 s)
- UusAutomatic time zone detection
- UusAlternative meter for car consumption (RS485)
- UusFV Exclusive with configurable variation
- UusNew Languages (French, Italian, and German)
- ParandusFixed error in minimum power mode.
-
- TäiustusImprovements in Dynamic Control with batteries
- TäiustusImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- ParandusResolved the IP configuration issues for Trydan with WiFi and BLE.
- ParandusResolved the issues with the IP configuration of Shelly BLE.
-
- UusInclusion of the Wibeee meter
- UusSlave 2.0 compatible with Type 1 and Type 2 installation
- UusChange in the established connection blinking
- UusDetection and measurement of bifacial load
- UusImprovement in the collection and transmission of charging data
- UusAlternative Meter Phoenix Contact (ModbusRTU)
- UusModbusRTU in Trydan (simultaneous slave and master)
- UusStatic IP configuration in Trydan
- UusPossibility to select the IP in Shelly
- TäiustusInclusion of maximum intensity in OCPP (as a property)
- TäiustusImprovement in the reading of Solax inverters
- TäiustusInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- TäiustusModbusRTU and Modbus TCP server in Trydan
- UuendatudFirst stable version of Ingeteam
- UuendatudImprovement in the speed of the leak detector
-
- ParandusError solution in manufacturing when saving WiFi
-
- UusEliminate false communication errors from the slaves.
- UusSave the first Shelly that Trydan connects to.
- UuendatudWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- TäiustusImprovement in telemetry recovery in OCPP
- TäiustusImprovement in scanning nearby WiFi networks
-
- UusInternal Azure ping every 15 seconds to detect disconnections.
- UusSeparate reconnections to avoid crashing the server.
- UusOCPP adaptation to work with Home Assistant
- TäiustusMigration of the I2C for the clock and LCD to native idf
-
- TäiustusIncrease maximum binary size in local webServer
- ParandusRecovery of OCPP transactions to prevent telemetry failures
-
- UusThe configuration of different IDs for Huawei inverters is added.
- TäiustusCorrection of the power reading of the house
- ParandusCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- UusPayment Method (V2C Payments)
- UusOCPP Protocol
- TäiustusImprovement of WiFi and Bluetooth stability and reconnection
- ParandusReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- ParandusCorrection of the maximum file size for updates on Local Server
-
- UusList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- TäiustusReconnection with V2C Cloud after communication loss
- ParandusCorrected Shelly and Solax routines
-
- UusShortcuts on the buttons: Lock and Charging Schedule
- UusLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- UusAP mode when the configured WiFi is not available
- TäiustusImprovement in LED error codes
- TäiustusAdaptation for compatibility with Huawei inverters
-
- UusWe added connectivity with Fronius inverters.
- TäiustusImprovements in screen writing and removal of strange characters
- TäiustusImprovement in the transmission of statistics via both WiFi and BLE.
-
- UusError correction x and y
6 / 46