Trydan un Trydan Pro atjauninājumi
Mēs nepārtraukti strādājam, lai uzlabotu Trydan un Trydan Pro funkcionalitāti. Šeit atradīsi jaunāko mūsu e-Charger versiju un pēdējos veiktos atjauninājumus.
Jaunākā versija
2.5.2
Trydan un Trydan Pro
2.5.2Jaunākā versija
New inverters (Solplanet/AISWEI, Hoymiles, Huawei without dongle), battery discharge control, unified statistics in mixed three-phase, and cybersecurity improvements in Bluetooth.
- JaunumsDirect query of OCPP status
- JaunumsNew Solplanet/AISWEI Inverter
- JaunumsNew Hoymiles Inverter
- JaunumsBattery discharge control: GoodWe, SolarEdge
- JaunumsHuawei inverters direct connection without Dongle
- JaunumsUnified statistics in mixed three-phase charging (the session is not divided when switching between three-phase and single-phase)
- JaunumsNew "Unlimited" Wake-up 5 mode available from the LCD
- JaunumsImprovements in Bluetooth cybersecurity
- UzlabojumsFixes in FV mode + Minimum power
- UzlabojumsOCPP: duplicate BootNotifications are avoided
- UzlabojumsSecurity menu lock during vehicle charging
- UzlabojumsImprovements for Linky-LORA
Iepriekšējās versijas 46
-
- JaunumsCompatibility with SigEnergy inverters
- JaunumsNew model of Ingeteam three-phase inverter (ISS 3PLAY)
- JaunumsWiFi connection for Deye inverters via Elfin
- JaunumsExpansion to 105 RFID cards
- JaunumsPAP/CHAP authentication for 4G connection
- JaunumsMore stable OCPP connections
- UzlabojumsReading the P1 and Victron meters is more reliable in the event of communication failures.
- UzlabojumsStability of mixed three-phase charging
- UzlabojumsError reporting and diagnostic system
- UzlabojumsImprovement of home battery charging priority in PV charging modes
-
- JaunumsManagement of home battery discharge in charging profiles
- JaunumsUnlocking the Trydan by smartphone proximity
- JaunumsNew models of SofarSolar and Azzurro inverters
- JaunumsAdded current and voltage per phase in Home Assistant and Modbus API.
- JaunumsWiFi connection in Deye inverters
- JaunumsIncrease of up to 80 RFID cards
- JaunumsBattery compatibility in SolarEdge inverters
- JaunumsScroll text for long texts
- UzlabojumsOptimization of Ethernet network interface
- UzlabojumsImprovements in the Modbus TCP client
- UzlabojumsImprovements in mixed three-phase charging
- UzlabojumsImprovement of texts in German
- UzlabojumsIncrease the voltage range of the installation from the control panel.
-
- LabojumsOCPP password bug
- LabojumsProblems connecting to CSMS after restarts
-
- JaunumsTarget charge kWh
- JaunumsNew SMA Sunny Boy model
- JaunumsNew Fronius model with battery
- JaunumsSelect Modbus API address ID
- JaunumsNew Deye models
- JaunumsSofar Solar inverters
- JaunumsAzzurro inverters
- JaunumsSelect MID address
- JaunumsEMMA Huawei
- JaunumsSecurity Profile 2 OCPP (wss + auth + CA cert)
- JaunumsPrivate 4G SIMs in OCPP
- JaunumsOcppFreeMode
- JaunumsOCPP internal queue messages
- UzlabojumsTime synchronization
- UzlabojumsPower plate measurements 1.0
- UzlabojumsWiFi improvements
- LabojumsExclusive mode bug with batteries
- LabojumsCoordinate "ContractedPower" and load profiles with HTTP API.
- LabojumsImprove RFID errors
- LabojumsMixed load bug
- LabojumsBug photovoltaic mode + minimum
- LabojumsBug statistics without FV via BLE
-
- JaunumsMIFARE Ultralight RFID cards
- UzlabojumsMore robust OTA update
- LabojumsBug management autolock with payments mode
- LabojumsBug in payments mode with RFID
-
- UzlabojumsInstallation problem readings
- UzlabojumsImprovement in BYD mode
- LabojumsBug with Wibeee inverter
-
- JaunumsObtain firmware version via Modbus
- JaunumsGoodWe via Modbus TCP
- JaunumsOCPP: FirmwareManagement
- JaunumsAutolock
- JaunumsNew MID models
- JaunumsNew wake-up modes
- JaunumsAllow changing the charging type in HA (single-phase, three-phase, or mixed)
- JaunumsLinky meter for French meters
- JaunumsModbus termination resistance
- JaunumsReading individual properties HTTP API
- JaunumsTurn off/Turn on logo and LCD from HTTP API
- AtjauninātsImprovements in dynamic control
- AtjauninātsImprovement in Sungrow inverter measurements
- AtjauninātsImprovements in the OTA update
- AtjauninātsImprovements in the button panel menu
- AtjauninātsNew Deye models
- AtjauninātsOCPP: improvement in MeterValues
- AtjauninātsOCPP: send StatusNotification "Faulted" with errors and warnings
- AtjauninātsOCPP: publish current version
- AtjauninātsOCPP: BootNotification timeout
- AtjauninātsNew NTP servers
- AtjauninātsImproved WI-FI scanning
- AtjauninātsImprovement in P1 meter
- AtjauninātsImprovement in remote logs
- AtjauninātsIoT call limitation per charger
- AtjauninātsImprove RAM memory
- AtjauninātsStability via Ethernet
- AtjauninātsCorrected translations
- LabojumsError "Waiting for Power"
- LabojumsBug with RFID cards with long names
- LabojumsBug when requesting the list of Wi-Fi SSIDs via Bluetooth.
- LabojumsImprove statistics via Bluetooth
- LabojumsLocal balancing improvements for up to 10 devices
- LabojumsBug when sending RFID code in the statistics
- LabojumsBug with Exclusive PV mode and batteries
-
- JaunumsStatic power control is added (only with Trydan consumption).
- JaunumsMixed charging adapts to European rates.
- JaunumsPower control programming with phase limits is allowed.
- JaunumsThe power control adapts to European countries with phase current limits.
- AtjauninātsThe power control algorithm has been modified step by step to apply PID modulation.
- AtjauninātsThe static power control between sockets or between e-Chargers is improved.
- LabojumsThe failure of remote records is avoided when a disconnection occurs.
-
- LabojumsBug DTSU666-G meters
-
- UzlabojumsImprovement in Wake Mode
- LabojumsFixed bug when changing the port in MQTT.
-
- JaunumsEcoCharging to schedule charging automatically during the cheapest daylight hours.
- JaunumsTurning on and off LEDs via Modbus TCP/RTU. Option to adjust and query the intensity of the LEDs and the LCD screen.
- JaunumsCompatibility with the new Chint DTSU666-G meter model, allowing for broader integration in various installations.
- JaunumsFirmware update of the V2C ControlBox meter (2.0) via the access point (AP) and the mobile app.
- JaunumsImprovement in the reading of electrical signals: State F detection implemented, enhancing the system's ability to recognize and respond to different operating conditions.
- JaunumsImprovement in the reading of electrical signals: The reading of the input PWM signal has been implemented using DMA (Direct Memory Access), enhancing efficiency and reducing processing load.
- JaunumsOCPP: Detailed reasons for OCPP functions, providing more comprehensive information about the actions taken and facilitating the diagnosis and analysis of events.
- JaunumsOCPP: The ability to operate in offline modes, allowing the charger to function correctly even without a connection to the server. Pending messages are stored and sent once the connection is restored, ensuring reliable and consistent communication.
- JaunumsOCPP: New OCPP state machine. Now, the system connects to the OCPP Central Server (CS) and receives most commands, improving interoperability and remote control.
- UzlabojumsReading the power value of the batteries in Goodwe EH and ET inverters.
- UzlabojumsSystem optimization: reduction of RAM usage, improving overall system stability and performance.
- UzlabojumsImprovement in the reading of electrical signals: Enhanced verification for state E, in addition to omitting zero values from the DMA to avoid incorrect readings.
- UzlabojumsImprovement in reading electrical signals: Now the CP (Control Pilot) signal is read using a parallel task, which enhances the accuracy and response of the system when interacting with the electric vehicle.
- UzlabojumsImprovement in the reading of electrical signals: Enhanced stability during this calibration process through the app.
- UzlabojumsOCPP: Host name resolution. Optimization of libraries to improve DNS resolution and the reliability of secure connections via Secure WebSocket (WSS), increasing stability in communication with remote servers.
- UzlabojumsOCPP: Ensuring that all important information reaches the server once the connection is restored through a persistent message queue.
- UzlabojumsOCPP: Status notifications. Improving communication with the central server for sending status notifications.
- LabojumsOCPP: Fixed a false card detection alert that appeared when starting the system, avoiding confusion and improving the user experience.
-
- JaunumsVoltage reading and writing manual for installation for Modbus TCP and HTTP integrations.
- JaunumsSAJ hybrid inverters
- JaunumsShelly Pro meters
- JaunumsInformation on the response /RealtimeData from http at the request of the developer of the official HA integration.
- JaunumsDirect methods to activate the access point (WiFi AP) and ping a specific IP.
- JaunumsTopic trydan_v2c_voltage to write the installation voltage via MQTT.
- UzlabojumsLeak detection
- UzlabojumsMemory management to avoid unexpected restarts with OCPP and the deletion of scheduled power profiles.
- UzlabojumsModbus TCP connections of Trydan and Trydan Pro with Huawei, Fronius, Victron, Ingeteam, SolarEdge, Kostal Plenticore, SMA, and SAJ Hybrid in error 252.
- UzlabojumsVisualization of the RFID card authentication process in OCPP
- UzlabojumsThe memory used in JSON and OCPP goes to the SPI RAM.
- LabojumsInformation about RFID cards to the OCPP platform standard for compatibility with platforms like E-flux, Monta…
- LabojumsCollision between the SPI elements (RFID, Ethernet, and GPIO extender) of Trydan Pro
-
- JaunumsAdaptation of OCPP to new central systems
- JaunumsNew Deye models
- UzlabojumsImprovements in the direction detection of the V2C 2.0 control box
- LabojumsLEDs blink when there is no connection.
- LabojumsBug in Greenheiss hybrid
-
- JaunumsDeye / Turbo Energy three-phase
- JaunumsShelly Pro EM and Shelly Pro 3EM (Beta)
- UzlabojumsShow text on bidirectional meters
- UzlabojumsReadings with Fronius and DTSU666
- UzlabojumsReaction times in the leak detector
- UzlabojumsShow Waiting for Charge in Stop mode
- LabojumsBug with French language
- LabojumsRaise the HTTP server via Ethernet
- LabojumsBug in payments
- LabojumsRead-only in the OCPP properties
- LabojumsSave power segments via Bluetooth on some devices.
- LabojumsShelly Portugal measurements
-
- JaunumsLive Remote Logs
- UzlabojumsShow stop due to dynamic control
- UzlabojumsRestarts due to reconnection attempts
- UzlabojumsQA Protocol
- UzlabojumsVoltage and Temperature Reading Power PCB
- LabojumsNaN measurement on some meters
- LabojumsError in Home Wizard readings
-
- UzlabojumsPerformance improvement and future compatibility between Trydan and Trydan Pro.
- UzlabojumsImprovements in OCPP protocol
- UzlabojumsImprovements in the QA process
- UzlabojumsImprovement in memory usage
- UzlabojumsMore robust statistics
-
- JaunumsNetworks with WPA3 security
- JaunumsNew BLE (NimBLE)
- Jaunumse-keys via BLE connection
- JaunumsNew language: Romanian
- JaunumsEnphase version 7.x.x, Solis with batteries
- JaunumsAdaptation of the i2c power board
- UzlabojumsAzure library update
- UzlabojumsUpdate of ESP-IDF and Arduino-ESP32 libraries
- UzlabojumsInvestor communication via WiFi connection without Internet
- UzlabojumsImprovement in V2C 2.0 meter refresh rate
- UzlabojumsImprovement in OCPP, adaptation to support disconnections
- UzlabojumsImprovement in key fob detection
- UzlabojumsImproved refresh rate
- UzlabojumsImprovement of values in Huawei, improvement of Chint in Huawei, and end of charge review.
- LabojumsModification of Deye/Turbo Energy batteries
- LabojumsCustomizable MQTT topics and username/password
- LabojumsDisconnection statistics report
- LabojumsBLE compatibility of iPhone
- LabojumsOperation of V2C 2.0 meter at night
- LabojumsAutomatic date and time
- LabojumsInteraction with Megane
-
- JaunumsBug in photovoltaic three-phase mode
- UzlabojumsWiFi recovery routine
-
- JaunumsMixed three-phase charging available through the physical menu.
- JaunumsAdded three-phase MID Meter
- JaunumsInclusion of server ID 2 in SolarEdge inverters
- JaunumsAdded Modbus registers with the meter measurement.
- JaunumsHTTP commands added for integration with HA.
- JaunumsEnphase Envoy Inverter (beta) (versions 5.x.x)
- JaunumsV2C 2.0 error detection of clamp not connected
- JaunumsMQTT Slave with user/password authentication and customizable topics (beta)
- UzlabojumsImprovement of the WatchDog to prevent system freezing
- UzlabojumsImprovement of nearby WiFi scanning
- UzlabojumsBluetoothLE service reconnection protocol
- UzlabojumsWiFi optimization IRAM and affinity with the Azure task
- UzlabojumsReconnection protocol in the absence of WiFi
- UzlabojumsFactory reset
- UzlabojumsThe error code and LED interface
- UzlabojumsImproved the Isolated Installation mode and zero feed-in.
- UzlabojumsReduction in cut-off time through dynamic control to 1 min
- UzlabojumsAutomatic detection of time and time zone
- UzlabojumsThe optimization and refactoring of the measurement slaves
- UzlabojumsUnlocking with BLE Tag
- LabojumsOccasional LCD freezes
- LabojumsFalse positives from the leak detector
- LabojumsProblems with the MID Meter
- LabojumsLED error during update
- LabojumsDefault value for JSON type variables
- LabojumsMeasurement at 0 in Deye/TurboEnergy Inverter
- LabojumsVisual errors and local balancing address assignment
-
- JaunumsSolar Discount on Shortcuts
- JaunumsDeye/TurboEnergy Inverter Beta
- JaunumsPhoenix Contact meter
- JaunumsCarlo Gavazzi meter
- UzlabojumsOCPP improvements and tested in MONTA
- UzlabojumsProblems in dynamic control
- UzlabojumsReconnections and WiFi Stability
- LabojumsFrozen LCD
-
- JaunumsIsolated Mode in Photovoltaic Modes
- JaunumsDutch, Danish, and Valencian
- JaunumsLeak sensor modes (installer menu)
- JaunumsMID meter (installer menu)
- JaunumsNew Ingeteam protocol (Battery Management)
- JaunumsThree-phase meters DTSU666
- JaunumsSDM three-phase meters
- UzlabojumsLocal Balancing Protocol and priorities
- UzlabojumsDetection of ports and hosts in OCPP
- UzlabojumsStable version of SMA Sunny Boy
- UzlabojumsPortuguese version of Wibeee
- UzlabojumsFronius measuring home consumption
- LabojumsUnexpected locks and unlocks
- LabojumsWhite blinking in locked mode removed
- LabojumsError selecting the slaves in beta
- LabojumsError of SolarEdge three-phase inverters
-
- JaunumsChanges and improvements in calibration
-
- UzlabojumsCalibration adapted to the new hardware
- LabojumsData analysis in Kostal Piko fixed
-
- JaunumsLocal balancing between Trydans available via WiFi or wired connection.
- JaunumsSDM-220/320/120 (Tested with the Eastron brand)
- JaunumsDDSU-666 Meter (Common in Huawei installations)
- JaunumsSelf-calibrating without the need for a car
- JaunumsManual hour available
- JaunumsHTTP requests to manage the logs
- JaunumsNew Modbus Registers
- JaunumsGreenheiss inverters
- JaunumsSAJ inverters
- JaunumsWired Solis inverters
- JaunumsResponse time in configurable dynamic control
- UzlabojumsConfigurable installation voltage
- UzlabojumsNew manufacturing process
- UzlabojumsIncluded Shelly three-phase but without FV measurement.
- UzlabojumsCar consumption via MQTT fixed
- UzlabojumsImproved and more intuitive physical menu
- SaderībaBeta models of Goodwe: the battery measurement is canceled.
- LabojumsBug in Max and Min Intensity via Modbus fixed.
- LabojumsFalse positives in the leak detector fixed
-
- JaunumsPrevention of conflicts between slaves and the cloud
- LabojumsGoodWe conflicts and Azure initialization
- LabojumsFix in Shelly with only three-phase.
-
- UzlabojumsPending statistics will be sent only once.
- UzlabojumsShelly 3EM three-phase and modification for Portugal
- LabojumsModbus Multiple Readings Hotfix
-
- JaunumsNew Modbus registers
- JaunumsRFID reader in alpha version
- JaunumsSolaX X3 híbrido compatible
- JaunumsAvailable calibration and shortcuts via WiFi
- UzlabojumsOCPP Improvements
- UzlabojumsImprovement in WiFi scanning
- UzlabojumsImprovement in reconnection routines
- LabojumsBluetooth timezone failure
- LabojumsError in Trydan synchronization - APP
- LabojumsStatic IP configuration in Trydan via WiFi
- LabojumsError saving Modbus parameters
-
- JaunumsNew method for calibrating communication with the car
- JaunumsBeta version of the GoodWe ET/EH/BT/BH
- UzlabojumsImprovement in the communication analysis with the car
-
- JaunumsAuto lock after 60 seconds without a car (shortcut)
- JaunumsModification for Three-Phase Installations in Portugal for V2C 2.0
- JaunumsKostal Piko is added.
- UzlabojumsReformulation of the Dynamic Control Algorithm
- UzlabojumsImprovement in the refresh rate of Huawei inverters
- UzlabojumsSolarEdge stable (Meter measuring export)
- UzlabojumsStable version of GoodWe
- UzlabojumsDetection of state D and E according to protocol
- UzlabojumsImproved QA process
- LabojumsStored in memory after writings via Modbus TCP and RTU
- LabojumsBug in the FV measurements and peaks resolved for V2C 2.0
-
- JaunumsGoodWe in beta version
- JaunumsCheck the charging status to avoid short charges (Car at 100% or on scheduled charging)
- UzlabojumsMQTT in stable version
- UzlabojumsVictron in stable version
- UzlabojumsImproved connection with Azure
-
- JaunumsMQTT slave beta version
- UzlabojumsDetection of power direction in Wibeee
- LabojumsThe Victron and SolarEdge inverters were bringing down the system.
-
- JaunumsSolarEdge inverter added (Beta)
- JaunumsVictron inverter added (Beta)
- JaunumsAutolock enabled in shortcut (60 s)
- JaunumsAutomatic time zone detection
- JaunumsAlternative meter for car consumption (RS485)
- JaunumsFV Exclusive with configurable variation
- JaunumsNew Languages (French, Italian, and German)
- LabojumsFixed error in minimum power mode.
-
- UzlabojumsImprovements in Dynamic Control with batteries
- UzlabojumsImprovements in Dynamic Control in Three-Phase Installations (Exclusive Mode and Minimum Power)
- LabojumsResolved the IP configuration issues for Trydan with WiFi and BLE.
- LabojumsResolved the issues with the IP configuration of Shelly BLE.
-
- JaunumsInclusion of the Wibeee meter
- JaunumsSlave 2.0 compatible with Type 1 and Type 2 installation
- JaunumsChange in the established connection blinking
- JaunumsDetection and measurement of bifacial load
- JaunumsImprovement in the collection and transmission of charging data
- JaunumsAlternative Meter Phoenix Contact (ModbusRTU)
- JaunumsModbusRTU in Trydan (simultaneous slave and master)
- JaunumsStatic IP configuration in Trydan
- JaunumsPossibility to select the IP in Shelly
- UzlabojumsInclusion of maximum intensity in OCPP (as a property)
- UzlabojumsImprovement in the reading of Solax inverters
- UzlabojumsInclusion of batteries in Huawei, Ingeteam, and Fronius inverters.
- UzlabojumsModbusRTU and Modbus TCP server in Trydan
- AtjauninātsFirst stable version of Ingeteam
- AtjauninātsImprovement in the speed of the leak detector
-
- LabojumsError solution in manufacturing when saving WiFi
-
- JaunumsEliminate false communication errors from the slaves.
- JaunumsSave the first Shelly that Trydan connects to.
- AtjauninātsWith dynamic control disabled, maintain intensity after finishProgramedSaveMode.
-
- UzlabojumsImprovement in telemetry recovery in OCPP
- UzlabojumsImprovement in scanning nearby WiFi networks
-
- JaunumsInternal Azure ping every 15 seconds to detect disconnections.
- JaunumsSeparate reconnections to avoid crashing the server.
- JaunumsOCPP adaptation to work with Home Assistant
- UzlabojumsMigration of the I2C for the clock and LCD to native idf
-
- UzlabojumsIncrease maximum binary size in local webServer
- LabojumsRecovery of OCPP transactions to prevent telemetry failures
-
- JaunumsThe configuration of different IDs for Huawei inverters is added.
- UzlabojumsCorrection of the power reading of the house
- LabojumsCorrection of the lock due to Payment Mode and OCPP after deactivation of these.
-
- JaunumsPayment Method (V2C Payments)
- JaunumsOCPP Protocol
- UzlabojumsImprovement of WiFi and Bluetooth stability and reconnection
- LabojumsReconnection improvement in the inverters and fix after the update of the Huawei SUN2000.
-
- LabojumsCorrection of the maximum file size for updates on Local Server
-
- JaunumsList of available WiFi networks from Trydan (for viewing from iPhone and Android)
- UzlabojumsReconnection with V2C Cloud after communication loss
- LabojumsCorrected Shelly and Solax routines
-
- JaunumsShortcuts on the buttons: Lock and Charging Schedule
- JaunumsLocal Web page for configuring the Trydan accessible via AP or STA WiFi
- JaunumsAP mode when the configured WiFi is not available
- UzlabojumsImprovement in LED error codes
- UzlabojumsAdaptation for compatibility with Huawei inverters
-
- JaunumsWe added connectivity with Fronius inverters.
- UzlabojumsImprovements in screen writing and removal of strange characters
- UzlabojumsImprovement in the transmission of statistics via both WiFi and BLE.
-
- JaunumsError correction x and y
6 no 46